Test Report

FCC ID: ASIJ7R001

Test Report

Download: PDF
FCCID_373739

6 Randolph Way Advanced Hillsborough, NJ 08844 Tel: (908) 927 9288 Compliance Laboratory Fax: (908) 927 0728 ELECTROMAGNETIC EMISSION COMPLIANCE REPORT of 900MHZ CORDLESS HEADPHONE TRANSMITTER MODEL: HA-W1000RF FCC ID: ASIJ7R001 September 5, 2003 This report concerns (check one): Original grant x Class II change Equipment type: LOW POWER TRANSMITTER Deferred grant requested per 47 CF 0.457(d)(1)(ii)? yes no x If yes, defer until: (date) Company agrees to notify the Commission by (date) of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? yes no x If no, assumed Part 15, Subpart B for unintentional radiators - the new 47 CFR [10-1-90 Edition] provision. Report prepared for: VICTOR COMPANY OF JAPAN LTD. Report prepared by: Advanced Compliance Lab Report number: 0048-030718-02-TX The test result in this report IS supported and covered by the NVLAP accreditation

FCC ID: ASIJ7R001 Table of Contents Report Cover Page.........................................................................................................1 Table of Contents ...........................................................................................................2 Figures.............................................................................................................................3 1. GENERAL INFORMATION ...................................................................................4 1.1 Verification of Compliance .........................................................................4 1.2 Equipment Modifications............................................................................5 1.3 Product Information....................................................................................6 1.4 Test Methodology.........................................................................................6 1.5 Test Facility ..................................................................................................6 1.6 Test Equipment ............................................................................................6 1.7 Statement of the Document Use..................................................................7 2. PRODUCT LABELING............................................................................................8 3. SYSTEM TEST CONFIGURATION ......................................................................9 3.1 Justification ..................................................................................................9 3.2 Special Accessories.......................................................................................9 3.3 Configuration of Tested System .................................................................9 4. SYSTEM SCHEMATICS .........................................................................................13 5. CONDUCTED EMISSION DATA ..........................................................................14 5.1 Test Methods and Conditions .....................................................................14 5.2 Test Data .......................................................................................................14 6. RADIATED EMISSION DATA ...............................................................................17 6.1 Field Strength Calculation ..........................................................................17 6.2 Test Methods and Conditions .....................................................................17 6.3 Test Data .......................................................................................................18 7. PHOTOS OF TESTED EUT ....................................................................................19 ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 2

FCC ID: ASIJ7R001 Figures Figure 2.1 FCC ID Label...............................................................................................8 Figure 2.2 Location of Label on Back of the EUT ......................................................8 Figure 3.1 Cable Interlink Configuration....................................................................10 Figure 3.2 Radiated Front.............................................................................................11 Figure 3.3 Radiated Rear ..............................................................................................11 Figure 3.4 Conducted Front..........................................................................................12 Figure 3.5 Conducted Rear ...........................................................................................12 Figure 4.1 EUT Schematics...........................................................................................13 Figure 5.1 Line Conducted............................................................................................14 Figure 5.2 Neutral Conducted ......................................................................................15 Figure 7.1 Top View.......................................................................................................20 Figure 7.2 Bottom View.................................................................................................21 Figure 7.3 Front View....................................................................................................22 Figure 7.4 Rear View .....................................................................................................23 Figure 7.5 Open View ....................................................................................................24 Figure 7.6 PCB Component Side..................................................................................25 Figure 7.7 PCB Foil Side ...............................................................................................26 Figure 7.8 Metal Box Open View..................................................................................27 ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 3

FCC ID: ASIJ7R001 1. GENERAL INFORMATION 1.1 Verification of Compliance EUT: 900MHZ CORDLESS HEADPHONE TRANSMITTER Model: HA-W1000RF Applicant: VICTOR COMPANY OF JAPAN LTD. 12, 3-CHOME, MORIYA-CHO, KANAGAWA YOKOHAMA (KANAGAWA), 221-8528, JAPAN Test Type: FCC Part 15C CERTIFICATION Result: PASS Tested by: ADVANCED COMPLIANCE LAB Test Date: September 5, 2003 Report Number: 0048-030718-02-TX The above equipment was tested by Advanced Compliance Laboratory for compliance with the requirement set forth in the FCC rules and regulations Part 15, subpart C. This said equipment in the configuration described in the report, shows the maximum emission levels emanating from equipment are within the compliance requirements. The estimated uncertainty of the test result is given as following. The method of uncertainty calculation is provided in Advanced Compliance Lab. Doc. No. 0048-01-01. Prob. Dist. Uncertainty(dB) Uncertainty(dB) Uncertainty(dB) 30-1000MHz 1-6.5GHz Conducted Combined Std. Uncertainty uc norm. ±2.36 ±2.99 ±1.83 ____________________ Wei Li Date: September 5, 2003 Lab Manager Advanced Compliance Lab ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 4

FCC ID: ASIJ7R001 1.2 Equipment Modifications N/A ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 5

FCC ID: ASIJ7R001 1.3 Product Information System Configuration ITEM DESCRIPTION FCC ID CABLE Product TRANSMITTER ASIJ7R001* Housing PLASTICS Power Supply DC 7.5V J47310-001 AC Adapter 120V/60Hz Clock/OSC Freq. 907 MHz (Center Frequency) Device Type Continuous Operation MP3 Player OPTIMUS DR-32 FM Receiver Sony SRF-19W Receiver FCC Certificate ASIJ7R002* * EUT submitted for grant. 1.4 Test Methodology Radiated tests were performed according to the procedures in ANSI C63.4-1992 at an antenna to EUT distance of 3 meters. 1.5 Test Facility The open area test site and conducted measurement facility used to collect the radiated and conducted data are located at Somerset, New Jersey. This site has been accepted by FCC to perform measurements under Part 15 or 18 in a letter dated May 19, 1997 (Refer to: 31040/PRV 1300F2). The NVLAP Lab code for accreditation of FCC EMC Test Method is: 200101-0. 1.6 Test Equipment Manufacture Model Serial No. Description Last Cal Cal dd/mm/y Due y dd/mm/y y Hewlett-Packard HP8546A 3625A00341 EMI Receiver 23/10/02 23/10/03 EMCO 3104C 9307-4396 20-300MHz Biconical Antenna 19/09/02 19/09/03 EMCO 3146 9008-2860 200-1000MHz Log-Periodic Antenna 27/09/02 27/09/03 Fischer Custom LISN-2 900-4-0008 Line Impedance Stabilization Networks 03/07/03 03/07/04 Fischer Custom LISN-2 900-4-0009 Line Impedance Stabilization Networks 03/07/03 03/07/04 EMCO 6502 2665 10KHz-30MHz Active Loop Antenna 15/02/03 15/02/04 ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 6

FCC ID: ASIJ7R001 All Test Equipment Used are Calibrated Traceable to NIST Standards. 1.7 Statement for the Document Use This report shall not be reproduced except in full, without the written approval of the laboratory. And this report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government. ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 7

FCC ID: ASIJ7R001 2. PRODUCT LABELING FCC ID: ASIJ7R001 This device complies with part 15 of the FCC Rules. Operating is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Figure 2.1 FCC ID Label FCC LABEL Figure 2.2 Location of the Label ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 8

FCC ID: ASIJ7R001 3. SYSTEM TEST CONFIGURATION 3.1 Justification The system was configured for testing in a typical fashion (as a customer would normally use it). And its antenna was permanently attached to the EUT with fixed maximum length, 3 inches. When an audio signal is input, the transmitter’s power is turned on automatically, and the indicator lights in green. Also, when no audio signal is input for about a minute, the indicator goes out automatically and the power turns off. (Automatic Power On/Off function) Testing was performed as EUT was operated at frequency 906~908MHz continuously. The worst case of EUT operating frequency as 106.7MHz is recorded for final data on Pg. 19. 3.2 Special Accessories N/A 3.3 Configuration of Tested System Figure 3.1 and Figure 3.3 illustrate this system, which is tested standing along. ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 9

FCC ID: ASIJ7R001 Figure 3.1 Cable Interlink Configuration ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 10

FCC ID: ASIJ7R001 Figure 3.2 Radiated Front Figure 3.3 Radiated Rear ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 11

FCC ID: ASIJ7R001 Figure 3.4 Conducted Front Figure 3.5 Conducted Rear ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 12

FCC ID: ASIJ7R001 4. SYSTEM SCHEMATICS Figure 4.1 System Schematics ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 13

FCC ID: ASIJ7R001 5. CONDUCTED EMISSION DATA 5.1 Test Methods and Conditions The EUT was under normal operational mode during the conducted emission test. EMI Receiver was scanned from 450KHz to 30MHz with maximum hold mode for maximum emission. Recorded data was sent to the plotter to generate output in linear format. At the input of the spectrum analyzer, a HP transient limiter is inserted for protective purpose. This limiter has a 10 dB attenuation in the range of 450KHZ to 30MHZ. That factor was automatically compensated by the receiver, so the readings are the corrected readings. The reference of the plot is the CISPR 22 Class B limit in Figure 5.1 through Figure 5.2. Conducted Emission Technical Requirements Class A Class B Frequency Range Quasi-Peak Average Quasi-Peak Average dBuV dBuV DBuV dBuV 150kHz –0.5MHz 79 (8912uV) 66 (1995uV) 66-56 56-46 0.5MHz-30MHz 73 (4467uV) 60 (1000uV) --- --- 0.5MHz- 5MHz --- --- 56 46 5MHz-30MHz --- --- 60 50 Emissions that have peak values close to the specification limit (if any) are also measured in the quasi-peak mode to determine compliance. 5.2 Test Data Figure 5.1 through Figure 5.2 show the neutral and line conducted emissions for the standard operation mode. Six Highest Data for AC Line Conducted Emissions Frequency (MHz) 0.154 0.179 0.239 0.241 0.298 0.500 Peak Reading (dBuV) 38.3 38.4 34.8 35.0 34.6 33.8 Test Personnel: Tester Signature: Date: September 5, 2003 Typed/Printed Name: Edward Lee ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 14

FCC ID: ASIJ7R001 Figure 5.1 Line Conducted ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 15

FCC ID: ASIJ7R001 Figure 5.2 Neutral Conducted ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 16

FCC ID: ASIJ7R001 6. RADIATED EMISSION DATA 6.1 Field Strength Calculation The corrected field strength is automatically calculated by EMI Receiver using following: FS = RA +AF + CF + AG where FS: Corrected Field Strength in dBµV/m RA: Amplitude of EMI Receiver before correction in dBµV AF: Antenna Factor in dB/m CF: Cable Attenuation Factor in dB AG: Built-in Preamplifier Gain in dB (Stored in receiver as part of the calibration data) 6.2 Test Methods and Conditions The initial step in collecting radiated data is a EMI Receiver scan of the measurement range below 30MHz using peak detector and 9KHz IF bandwidth / 30KHz video bandwidth. For the range 30MHz - 5GHz, IF bandwidth / 30KHz video bandwidth are used. Both bandwidths are 1MHz for above 1GHz measurement. 6.3 Test Data The following data lists the significant emission frequencies, polarity and position, peak reading of the EMI Receiver, the FCC limit, and the difference between the peak reading and the limit. Explanation of the correction and calculation are given in section 5.1. Testing was performed as EUT was operated at frequency 906~908MHz continuously. The worst case of EUT operating frequency as 106.7MHz (CH2) is recorded for final data. Test Personnel: Tester Signature: Typed/Printed Name: Edward Lee Date: September 5, 2003 ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 17

FCC ID: ASIJ7R001 Radiated Test Data Worst Case : operating frequency=906.7MHz Frequency Polarity Height Azimuth Peak(2) Class B(1) Difference [H, V] Reading 3m Limit from limit (MHz) Position (m) (Degree) (dBµV/m) (dBµV/m) (dB) 906.7 H 1.1 180 55.4 94 -38.6 2720.1 H 1.1 180 49.0 54 -5 3626.8 H 1.1 180 47.6 54 -6.4 4533.5 H 1.1 180 49.8 54 -4.2 906.7 V 1.2 180 66.0 94 -28 2720.1 V 1.2 180 48.4 54 -5.6 3626.8 V 1.2 180 51.7 54 -2.3 4533.5 V 1.2 180 50.4 54 -3.6 (1) The limit for emissions within the 902-928MHz band is 50,000uV/m(94dB). Sec. 15.249. The limit for field harmonics is 500uV/m(54dB). The limit for other emissions is defined in Sec. 15.249. (2) Because each peak reading is less than the FCC average limit, it is not necessary to show the calculated average reading based on the pulse train characteristics. ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 18

FCC ID: ASIJ7R001 7. PHOTOS OF TESTED EUT The following photos show the inside details of the EUT. ——————————————————————————————————————————————— Advanced Compliance Lab 6 Randolph Way, Hillsborough, NJ 08844 Tel: (908) 927-9288 Fax: (908) 927-0728 19


Document Created: 2003-11-07 08:31:11
Document Modified: 2003-11-07 08:31:11
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC