TEST REPORT

FCC ID: ARSLM1780

Test Report

Download: PDF
FCCID_346170

FCC ID: ARSLM1780




                             FCC TEST REPORT

                           REPORT NO.: F920716A05

                             MODEL NO.: LXB-L17C

                              RECEIVED: July 16, 2003

                                 TESTED: July 17, 2003




                   APPLICANT: Top Victory Electronics (Taiwan) Co., Ltd.

                     ADDRESS: 18F, No. 738, Chung Cheng Road, Chung Ho,
                              Taipei Hsien, Taiwan 235




                    ISSUED BY: Advance Data Technology Corporation

              LAB LOCATION: 47 14th Lin, Chiapau Tsun, Linko, Taipei,
                            Taiwan, R.O.C.




  This test report consists of 20 pages in total. It may be duplicated completely for legal use with the
  approval of the applicant. It should not be reproduced except in full, without the written approval of
  our laboratory. The client should not use it to claim product endorsement by CNLA, NVLAP or any
  government agencies. The test results in the report only apply to the tested sample.




                                                             0528                Lab Code: 200102-0
                                                          ILAC MRA




Report No.: F920716A05                              1                                   Issued: July 21, 2003


FCC ID: ARSLM1780




                                         Table of Contents
1        CERTIFICATION ........................................................................................................3
2        SUMMARY OF TEST RESULTS .............................................................................4
3        GENERAL INFORMATION .......................................................................................5
3.1      GENERAL DESCRIPTION OF EUT ....................................................................... 5
3.2      DESCRIPTION OF TEST MODES.......................................................................... 5
3.3      DESCRIPTION OF SUPPORT UNITS ................................................................... 6
4        EMISSION TEST........................................................................................................7
4.1      CONDUCTED EMISSION MEASUREMENT ........................................................ 7
4.1.1    LIMITS OF CONDUCTED EMISSION MEASUREMENT ................................... 7
4.1.2    TEST INSTRUMENTS .............................................................................................. 7
4.1.3    TEST PROCEDURE .................................................................................................. 8
4.1.4    DEVIATION FROM TEST STANDARD .................................................................. 8
4.1.5    TEST SETUP .............................................................................................................. 8
4.1.6    EUT OPERATING CONDITIONS ............................................................................ 9
4.1.7    TEST RESULTS .......................................................................................................10
4.2      RADIATED EMISSION MEASUREMENT ............................................................12
4.2.1    LIMITS OF RADIATED EMISSION MEASUREMENT .......................................12
4.2.2    TEST INSTRUMENTS ............................................................................................13
4.2.3    TEST PROCEDURE ................................................................................................13
4.2.4    DEVIATION FROM TEST STANDARD ................................................................14
4.2.5    TEST SETUP ............................................................................................................15
4.2.6    EUT OPERATING CONDITIONS ..........................................................................15
4.2.7    TEST RESULTS .......................................................................................................16
5        PHOTOGRAPHS OF THE TEST CONFIGURATION ........................................18
6        APPENDIX - INFORMATION ON THE TESTING LABORATORIES...............20




Report No.: F920716A05                                         2                                             Issued: July 21, 2003


FCC ID: ARSLM1780



1 CERTIFICATION

           PRODUCT:      17” LCD MONITOR
       BRAND NAME:       Lenovo
         MODEL NO.:      LXB-L17C
          TEST ITEM:     ENGINEERING SAMPLE
         APPLICANT:      TOP VICTORY ELECTRONICS (TAIWAN) CO., LTD.
        STANDARDS:       FCC Part 15, Subpart B, Class B
                         ANSI C63.4-1992


We, Advance Data Technology Corporation, hereby certify that one sample of
the designation has been tested in our facility on July 17, 2003. The test record,
data evaluation and Equipment Under Test (EUT) configurations represented
herein are true and accurate accounts of the measurements of the sample's EMC
characteristics under the conditions herein specified.




        PREPARED BY:                               ,   DATE:      July 21, 2003




        APPROVED BY:                               ,   DATE:      July 21, 2003




Report No.: F920716A05                    3                            Issued: July 21, 2003


FCC ID: ARSLM1780



2 SUMMARY OF TEST RESULTS

The EUT has been tested according to the following specifications:

          Standard         Test Type      Result        Remarks
                                               Meets Class B Limit
    FCC Part 15,         Conducted Test   PASS Minimum passing margin
    Subpart B, Class B                         is –11.54 dB at 0.201 MHz
                                               Meets Class B Limit
    ANSI C63.4-1992      Radiated Test    PASS Minimum passing margin
                                               is –5.50 dB at 500.78 MHz

.




Report No.: F920716A05                    4                          Issued: July 21, 2003


FCC ID: ARSLM1780                                                                 /LDAI"
                                                                                 ADT CORP.


3     GENERAL INFORMATION

3.1     GENERAL DESCRIPTION OF EUT

    PRODUCT              17"LCD MONITOR
    MODEL NO.            LXB—17C
                         Switching
    POWER SUPPLY Input rat|ng:.100-240Vac, 50/60Hz
                 Power Cord:
                           Non—shielded AC, 3 pin (1.8m)
    DATA CABLE           VGA Shielded (1.8m) with one ferrite core

NOTE: The EUT is a 17" LCD MONITOR with resolution up to 1280x1 024.

           For a more detailed features description, please refer to the manufacturer‘s
           specifications or the User‘s Manual.




3.2 DESCRIPTION OF TESTMODES

The EUT was pre—tested under the following resolution & horizontal synchronization
speed modes:

*     1280x1024 mode (75Hz/80kHz),
*     1024x768 mode (75Hz/60kHz),
*     640x480 mode (60Hz/31.5kHz)

The worst emission levels were found when the EUT was tested under 1280x1024
mode (75H2z/80kHz) resolution. Therefore, only the test data of EUT tested under
this mode is recorded in this report.




Report No.: F920716A05                       5                            Issued: July 21, 2003


FCC ID: ARSLM1780




3.3 DESCRIPTION OF SUPPORT UNITS

The EUT has been tested as an independent unit together with other necessary
accessories or support units. The following support units or accessories were used to
form a representative test configuration during the tests.

    NO.       PRODUCT          BRAND         MODEL NO.          SERIAL NO.            FCC ID
             PERSONAL
      1                           HP          Brio BA410       SG12106002       FCC DoC Approved
             COMPUTER
      2        MODEM           ACEEX            1414            980020534         IFAXDM1414
      3       PRINTER          EPSON           LQ-300+         DCGY017090       FCC DoC Approved
                PS/2                                                            E5XKB5122WTH01
      4                          BTC             5200T          F24800260
             KEYBOARD                                                                 10
      5     PS/2 MOUSE           BTC             M851               N/A           E5XMSM860
            VGA DISPLAY
      6                         ELSA        ERAZOR III LT       0111012778             DOC
                CARD

    NO.               SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS
      1   N/A
          1.2 m braid shielded wire, terminated with DB25 and DB9 connector via metallic frame,
      2
          w/o core.
          1.2m braid shielded wire, terminated with DB25 and Centronics connector via metallic
      3
          frame, w/o core
      4   1.6 m foil shielded wire, terminated with PS/2 connector via metallic frame, w/o core.
      5   1.5 m Non-shielded wire, terminated with PS/2 connector via drain wire, w/o core.
      6   N/A

   NOTE: All power cords of the above support units are non-shielded (1.8m).




Report No.: F920716A05                             6                                  Issued: July 21, 2003


FCC ID: ARSLM1780



4 EMISSION TEST

4.1 CONDUCTED EMISSION MEASUREMENT

4.1.1      LIMITS OF CONDUCTED EMISSION MEASUREMENT
                                     Class A (dBuV)                     Class B (dBuV)
    FREQUENCY (MHz)
                                  Quasi-peak   Average              Quasi-peak Average
            0.15 - 0.5               79          66                   66 - 56     56 - 46
            0.50 - 5.0               73          60                     56          46
            5.0 - 30.0               73          60                     60          50

  NOTES: (1) The lower limit shall apply at the transition frequencies.
             (2) The limit decreases in line with the logarithm of the frequency in the range of 0.15
                 to 0.50 MHz.
             (3) All emanations from a class A/B digital device or system, including any network of
                 conductors and apparatus connected thereto, shall not exceed the level of field
                 strengths specified above.



4.1.2      TEST INSTRUMENTS
             DESCRIPTION &                                                        CALIBRATED
                                            MODEL NO.         SERIAL NO.
            MANUFACTURER                                                             UNTIL
    ROHDE & SCHWARZ Test
                                              ESCS30           834115/016         Mar. 04, 2004
    Receiver
    ROHDE & SCHWARZ Artificial
                                             ESH2-Z5          892107/003           July 08, 2004
    Mains Network (For EUT)
    * ROHDE & SCHWARZ
                                               ENY41           838119/028         Nov. 29, 2003
     4-wire ISN
    * ROHDE & SCHWARZ
                                               ENY22          837497/018          Nov. 29, 2003
     2-wire ISN
    EMCO L.I.S.N.
                                               3825/2          9504-2359           July 08, 2004
    (For peripherals)
    Software                                Cond-V2M3             NA                   NA
    RF cable (JYEBAO)                         5D-FB          Cable-C03.01          May 23, 2004
    Terminator (For EMCO LISN)                   NA            E1-01-300          Feb. 23, 2004
    Terminator (For EMCO LISN)                   NA            E1-01-301          Feb. 23, 2004
  NOTE:    1.The calibration interval of the above test instruments is 12 months and the
              calibrations are traceable to NML/ROC and NIST/USA.
           2. “*”: These equipment are used for conducted telecom port test only (if tested).
           3. The test was performed in ADT Shielded Room No. 3.
           4. The VCCI Site Registration No. is C-274.




Report No.: F920716A05                                7                                 Issued: July 21, 2003


FCC ID: ARSLM1780                                                                   /LDAI"
                                                                                    ADT CORP.


4.1.3        TEST PROCEDURE
a. The EUT was placed 0.4 meters from the conducting wall of the shielded room
   with EUT being connected to the power mains through a line impedance
   stabilization network (LISN). Other support units were connected to the power
   mains through another LISN. The two LISNs provide 50 Ohm/ 50uH of coupling
   impedance for the measuring instrument.

b. Both lines of the power mains connected to the EUT were checked for maximum
   conducted interference.

c. The frequency range from 150 kHz to 30 MHz was searched. Emission levels over
   10dB under the prescribed limits could not be reported.


4.1.4      DEVIATION FROM TEST STANDARD
No deviation


4.1.5      TEST SETUP
                         Vertical Reference
                         Ground Plane                            /Test Receiver

                                                                        C————+1
                                                                        ©   o   a   o
                         EUT                _                        M“'ouoo




                                                80cm             |


                                      | |                        | |
                                                        N                               mm
                                                \Horizontal Reference
                                                       Ground Plane

        Note: 1.Support units were connected to second LISN.
                 2.Both of LISNs {(AMN) are 80 cm from EUT and at least 80 cm
                    from other units and other metal planes




For the actual test configuration, please refer to the related Item — Photographs of the
Test Configuration.




Report No.: F920716A05                          8                        Issued: July 21, 2003


FCC ID: ARSLM1780




4.1.6      EUT OPERATING CONDITIONS

      a. Turned on the power of all equipment.
      b. PC ran a test program to enable all functions.
      c. PC read and wrote messages from FDD and HDD.
      d. PC sent “H” messages to monitor (EUT) and monitor displayed “H”
         patterns on screen.
      e. PC sent “H” messages to modem.
      f. PC sent “H” messages to printer, and the printer printed them out.
      g. Steps c-g were repeated.




Report No.: F920716A05                  9                           Issued: July 21, 2003


FCC ID: ARSLM1780



4.1.7      TEST RESULTS

   EUT                       17” LCD MONITOR              MODEL NO.             LXB -L17C
   MODE                      1280x1024 (75Hz/80kHz)       6dB BANDWIDTH         9 kHz
   INPUT POWER               120Vac, 60 Hz                PHASE                 Line (L)

   ENVIRONMENTAL 27 deg. C, 48 % RH,
                                                          TESTED BY: Jim Hsiang
   CONDITIONS    1005 hPa



                                                    Emission
            Freq.        Corr.    Reading Value                     Limit              Margin
                                                      Level
    No                   Factor     [dB (uV)]       [dB (uV)]      [dB (uV)]            (dB)
           [MHz]          (dB)    Q.P.     AV.    Q.P.     AV.   Q.P.     AV.     Q.P.         AV.
     1      0.201         0.10    50.47     -     50.57     -    63.58 53.58     -13.01         -
     2      0.474         0.21    37.78     -     37.99     -    56.44 46.44     -18.45         -
     3      0.677         0.25    37.48     -     37.73     -    56.00 46.00     -18.27         -
     4      2.305         0.42    37.85     -     38.27     -    56.00 46.00     -17.73         -
     5      9.347         0.77    23.54     -     24.31     -    60.00 50.00     -35.69         -
     6     22.570         1.25    30.73     -     31.98     -    60.00 50.00     -28.02         -

REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
        2. "-": The Quasi-peak reading value also meets average limit and
            measurement with the average detector is unnecessary.
        3. The emission levels of other frequencies were very low against the limit.
        4. Margin value = Emission level - Limit value
      5. Correction factor = Insertion loss + Cable loss
        6. Emission Level = Correction Factor + Reading Value.




Report No.: F920716A05                            10                               Issued: July 21, 2003


FCC ID: ARSLM1780



   EUT                       17” LCD MONITOR              MODEL NO.             LXB -L17C

   MODE                      1280x1024 (75Hz/80kHz)       6dB BANDWIDTH         9 kHz

   INPUT POWER               120Vac, 60 Hz                PHASE                 Neutral (N)

   ENVIRONMENTAL 27 deg. C, 48 % RH,
   CONDITIONS                                             TESTED BY: Jim Hsiang
                 1005 hPa



                                                    Emission
            Freq.        Corr.    Reading Value                     Limit              Margin
                                                      Level
    No                   Factor     [dB (uV)]       [dB (uV)]      [dB (uV)]           (dB)
           [MHz]          (dB)    Q.P.     AV.    Q.P.     AV.   Q.P.     AV.     Q.P.      AV.
     1      0.201         0.10    51.94     -     52.04     -    63.58 53.58     -11.54      -
     2      0.401         0.20    43.51     -     43.71     -    57.83 47.83     -14.12      -
     3      0.677         0.25    35.62     -     35.87     -    56.00 46.00     -20.13      -
     4      2.711         0.40    36.82     -     37.22     -    56.00 46.00     -18.78      -
     5      9.082         0.57    20.08     -     20.65     -    60.00 50.00     -39.35      -
     6     22.570         0.75    30.75     -     31.50     -    60.00 50.00     -28.50      -

REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
        2. "-": The Quasi-peak reading value also meets average limit and
            measurement with the average detector is unnecessary.
        3. The emission levels of other frequencies were very low against the limit.
        4. Margin value = Emission level - Limit value
      5. Correction factor = Insertion loss + Cable loss
        6. Emission Level = Correction Factor + Reading Value.




Report No.: F920716A05                            11                               Issued: July 21, 2003


FCC ID: ARSLM1780


4.2 RADIATED EMISSION MEASUREMENT

4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT
        FOR FREQUENCY BELOW 1000 MHz
                                        Class A (at 10m)                    Class B (at 10m)
    FREQUENCY (MHz)
                                             dBuV/m                                dBuV/m
            30 – 230                              40                                 30
           230 - 1000                             47                                 37


     LIMIT OF RADIATED EMISSION OF FCC PART 15, SUBPART B
     FOR FREQUENCY ABOVE 1000 MHz
  FREQUENCY (MHz)               Class A (dBuV/m) (at 3m)             Class B (dBuV/m) (at 3m)
                                   PEAK             AVERAGE                 PEAK          AVERAGE
         Above 1000                 80.0                    60.0            74.0              54.0

     Note: (1) The lower limit shall apply at the transition frequencies.
            (2) Emission level (dBuV/m) = 20 log Emission level (uV/m).
            (3) All emanation from a class A/B digital device or system, including any
               network of conductors and apparatus connected thereto, shall not exceed the level of
               field strengths specified above.




Report No.: F920716A05                                 12                                 Issued: July 21, 2003


FCC ID: ARSLM1780




4.2.2      TEST INSTRUMENTS
  DESCRIPTION & MANUFACTURER              MODEL NO.          SERIAL NO.        CALIBRATED UNTIL
    HP Spectrum Analyzer                     8594E           3520A01861            May 07, 2004
    HP Preamplifier                          8447D           2944A08118            Nov. 10, 2003
   * HP Preamplifier                         8449B           3008A01201            Dec. 01, 2003
  * HP Preamplifier                          8449B           3008A01292            Aug. 07, 2003
  * ROHDE & SCHWARZ TEST
                                            ESVS 10           840241/010           Sept. 23, 2003
   RECEIVER
  SCHAFFNER Tunable
                                           VHBA 9123              459
    Dipole Antenna
                                                                                   Nov. 22, 2003
  SCHWARZBECK Tunable
                                            UHA 9105              977
    Dipole Antenna
  * ROHDE & SCHWARZ TEST                                      839013/007
                                              ESMI                                 Feb. 13, 2004
    RECEIVER                                                  839379/002
  * Schaffner BILOG Antenna                CBL6111C              2728              June 13, 2004
  * SCHWARZBECK Horn
                                         BBHA9120-D1             D130              June 30, 2004
    Antenna
  * EMCO Horn Antenna                         3115            9312-4192            Mar. 23, 2004
  * CHANCE Turn Table                         U200              9701                    NA
  * CHANCE Tower                             AT-100            CM-A003                    NA
                                         ADT_Radiate
   * Software                                                     NA                      NA
                                           d_V5.14
   * ANRITSU RF Switches                     MP59B           6100034537            Feb. 28, 2004
   * TIMES RF cable                           8D            CABLE-ST3-01           Feb. 28, 2004

  NOTE: 1. The calibration interval of the above test instruments is 12 months. And the calibrations
          are traceable to NML/ROC and NIST/USA.

           2. “*” = These equipment are used for the final measurement.
           3. The horn antenna and HP preamplifier (model: 8449B) are used only for the
              measurement of emission frequency above 1GHz if tested.
           4. The test was performed in ADT Open Site No. 3.
           5. The VCCI Site Registration No. is R-269.




4.2.3      TEST PROCEDURE

 a. The EUT was placed on the top of a rotating table 0.8 meters above the
    ground at a 10 meter open area test site. The table was rotated 360 degrees
    to determine the position of the highest radiation.

 b. The EUT was set 10 meters away from the interference-receiving antenna,
    which was mounted on the top of a variable-height antenna tower.


Report No.: F920716A05                            13                                 Issued: July 21, 2003


FCC ID: ARSLM1780



 c. The antenna is a broadband antenna, and its height is varied from one meter
    to four meters above the ground to determine the maximum value of the field
    strength. Both horizontal and vertical polarizations of the antenna are set to
    make the measurement.

 d. For each suspected emission, the EUT was arranged to its worst case and
    then the antenna was tuned to heights from 1 meter to 4 meters and the
    rotatable table was turned from 0 degrees to 360 degrees to find the
    maximum reading.

 e. The test-receiver system was set to quasi-peak detect function and specified
    bandwidth with maximum hold mode when the test frequency is below 1
    GHz.

 f.    The test-receiver system was set to peak and average detect function and
       specified bandwidth with maximum hold mode when the test frequency is
       above 1 GHz. If the peak reading value also meets average limit,
       measurement with the average detector is unnecessary.

  NOTE:

  1.   The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz
       for Quasi-peak detection (QP) at frequency below 1GHz.

  2.   The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 1 MHz
       for Peak detection at frequency above 1GHz. The resolution bandwidth of test
       receiver/spectrum analyzer is 1 MHz.

  3.   For measurement of frequency above 1000 MHz, the EUT was set 3 meters away from the
       interference antenna.



4.2.4      DEVIATION FROM TEST STANDARD
No deviation




Report No.: F920716A05                           14                                   Issued: July 21, 2003


FCC ID: ARSLM1780



4.2.5      TEST SETUP
                                                Ant. Tower
                                                                1-4m
                                                                Variable
       EUT&                       10m
       Support Units

                            Turn Table

          80cm


                                Ground Plane

                                Test Receiver




For the actual test configuration, please refer to the related Item – Photographs of the
Test Configuration.


4.2.6 EUT OPERATING CONDIT IONS
 Same as 4.1.6.




Report No.: F920716A05                     15                              Issued: July 21, 2003


FCC ID: ARSLM1780



4.2.7      TEST RESULTS

   EUT                        17” LCD MONITOR              MODEL NO.           LXB -L17C
                                                           FREQUENCY
   MODE                       1280x1024 (75Hz/80kHz)                           30-2000 MHz
                                                           RANGE
                                                           DETECTOR
   INPUT POWER                120Vac, 60 Hz                FUNCTION &          Quasi-Peak, 120kHz
                                                           BANDWIDTH
   ENVIRONMENTAL 32 deg. C, 49 % RH,
                                                           TESTED BY: Jim Hsiang
   CONDITIONS    1005 hPa



         ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 10 M
                          Emission                        Antenna     Table     Raw          Correction
            Freq.                       Limit    Margin
  No.                       Level                          Height     Angle     Value         Factor
           (MHz)                      (dBuV/m)    (dB)
                          (dBuV/m)                          (m)     (Degree)   (dBuV)         (dB/m)
   1       67.28           19.0 QP      30.00    -11.00    4.00 H     206       12.40          6.60
   2       108.93          21.1 QP      30.00     -8.90    4.00 H     336       9.40           11.70
   3       118.28          22.2 QP      30.00     -7.80    4.00 H     84        10.10          12.10
   4       130.93          22.5 QP      30.00     -7.50    4.00 H     293       10.00          12.50
   5       146.53          18.5 QP      30.00    -11.50    4.00 H      35       6.40           12.10
   6       212.30          18.9 QP      30.00    -11.10    4.00 H     187       7.90           11.00
   7       271.20          25.7 QP      37.00    -11.30    2.97 H     79        10.90          14.80
   8       500.78          31.5 QP      37.00     -5.50    1.77 H     84        10.40          21.10
   9       865.00          29.1 QP      37.00     -7.90    1.57 H      0        2.30           26.80

 REMARKS:           1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m)
                    2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB)
                    3. The other emission levels were very low against the limit.
                    4. Margin value = Emission level – Limit value.




Report No.: F920716A05                              16                                  Issued: July 21, 2003


FCC ID: ARSLM1780



   EUT                        17” LCD MONITOR              MODEL NO.           LXB -L17C

                                                           FREQUENCY
   MODE                       1280x1024 (75Hz/80kHz)                           30-2000 MHz
                                                           RANGE
                                                           DETECTOR
   INPUT POWER                120Vac, 60 Hz                FUNCTION &          Quasi-Peak, 120kHz
                                                           BANDWIDTH
   ENVIRONMENTAL 32 deg. C, 49 % RH,
                                                           TESTED BY: Jim Hsiang
   CONDITIONS    1005 hPa



            ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 10 M
                          Emission                        Antenna     Table     Raw          Correction
            Freq.                       Limit    Margin
  No.                       Level                          Height     Angle     Value         Factor
           (MHz)                      (dBuV/m)    (dB)
                          (dBuV/m)                          (m)     (Degree)   (dBuV)         (dB/m)
   1       83.74           20.6 QP      30.00     -9.40    1.51 V     134       12.20          8.40
   2       99.98           21.1 QP      30.00     -8.90    1.00 V     220       9.80           11.30
   3       170.85          15.8 QP      30.00    -14.20    1.00 V     124       5.30           10.40
   4       208.25          22.7 QP      30.00     -7.30    1.00 V     349       12.00          10.70
   5       217.00          20.2 QP      30.00     -9.80    1.24 V     200       8.90           11.30
   6       225.70          21.3 QP      30.00     -8.70    1.00 V     191       9.30           12.00
   7       857.94          29.3 QP      37.00     -7.70    2.16 V     100       2.70           26.70

 REMARKS:           1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m)
                    2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB)
                    3. The other emission levels were very low against the limit.
                    4. Margin value = Emission level – Limit value.




Report No.: F920716A05                              17                                  Issued: July 21, 2003


FCC ID: ARSLM1780




5 PHOTOGRAPHS OF THE TEST CONFIGURATION

                         CONDUCTED EMISSION TEST




Report No.: F920716A05             18              Issued: July 21, 2003


FCC ID: ARSLM1780




                         RADIATED EMISSION TEST




Report No.: F920716A05             19             Issued: July 21, 2003


FCC ID: ARSLM1780




6 APPENDIX - INFORMATION ON THE TESTING LABORATORIES
We, ADT Corp., were founded in 1988 to provide our best service in EMC and Safety
consultation. Our laboratories are accredited and approved by the following
approval agencies according to ISO/IEC 17025, Guide 25 or EN 45001:

   USA                   FCC, NVLAP, UL
   Germany               TUV Rheinland
   Japan                 VCCI
   New Zealand           MoC
   Norway                NEMKO
   Canada                INDUSTRY CANADA
   R.O.C.                CNLA, BSMI

Copies of accreditation certificates of our laboratories obtained from approval
agencies can be downloaded from our web site: www.adt.com.tw/index.5/phtml.
If you have any comments, please feel free to contact us at the following:

   Lin Kou EMC Lab:                  Hsin Chu EMC Lab:
   Tel: 886-2-26052180               Tel: 886-35-935343
   Fax: 886-2-26052943               Fax: 886-35-935342

   Lin Kou Safety Lab:               Lin Kou RF & Telecom Lab.
   Tel: 886-2-26093195               Tel: 886-3-3270910
   Fax: 886-2-26093184               Fax: 886-3-3270892

   Email: service@mail.adt.com.tw
   Web Site: www.adt.com.tw

The address and road map of all our labs can be found in our web site also.




Report No.: F920716A05                   20                           Issued: July 21, 2003



Document Created: 2003-07-22 10:09:37
Document Modified: 2003-07-22 10:09:37

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC