test report

FCC ID: ARSCM569P

Test Report

Download: PDF
FCCID_159472

FCC ID: ARSCM569P




                            FCC TEST REPORT

                                  REPORT NO.: F88092308A
                                      MODEL NO.: 5Vlr, 5V
                                        PART NO.: D560S
                                    RECEIVED: Mar. 22, 2001
                                       TESTED: Apr. 9, 2001




                          APPLICANT: TOP VICTORY ELECTRONICS CO.,
                                     LTD.
                           ADDRESS: 18F, NO. 738, CHUNG-CHENG RD.
                                     CHUNG HO, TAIPEI HSIEN, TAIWAN,
                                     R.O.C.




                          ISSUED BY: Advance Data Technology Corporation

                     LAB LOCATION: 47 14th Lin, Chiapau Tsun, Linko, Taipei,
                                   Taiwan, R.O.C.




  This test report consists of 18 pages in total. It may be duplicated completely for legal use with the
  approval of the applicant. It should not be reproduced except in full, without the written approval of
  our laboratory. The client should not use it to claim product endorsement by NVLAP or any U.S.
  government agencies. The test results in the report only apply to the tested sample. The test results
  in this report are traceable to the national or international standards.




                                                             0528               Lab Code: 200102-0



Report No.: F88092308A                             1                                   Issued: Apr. 20, 2001
Reference No.: 90032204


FCC ID: ARSCM569P




                                      Table of Contents
1        CERTIFICATION............................................................................................. 3
2        SUMMARY OF TEST RESULTS..................................................................... 4
3        GENERAL INFORMATION ............................................................................. 5
3.1      GENERAL DESCRIPTION OF EUT ............................................................... 5
3.2      DESCRIPTION OF TEST MODES ................................................................. 5
3.3      DESCRIPTION OF SUPPORT UNITS............................................................ 6
4        EMISSION TEST ............................................................................................ 7
4.1      CONDUCTED EMISSION MEASUREMENT.................................................. 7
4.1.1    LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................... 7
4.1.2    TEST INSTRUMENTS .................................................................................... 7
4.1.3    TEST PROCEDURE ....................................................................................... 8
4.1.4    DEVIATION FROM TEST STANDARD ........................................................... 8
4.1.5    TEST SETUP .................................................................................................. 8
4.1.6    EUT OPERATING CONDITIONS.................................................................... 9
4.1.7    TEST RESULTS............................................................................................ 10
4.2      RADIATED EMISSION MEASUREMENT..................................................... 12
4.2.1    LIMITS OF RADIATED EMISSION MEASUREMENT .................................. 12
4.2.2    TEST INSTRUMENTS .................................................................................. 13
4.2.3    TEST PROCEDURE ..................................................................................... 13
4.2.4    DEVIATION FROM TEST STANDARD ......................................................... 14
4.2.5    TEST SETUP ................................................................................................ 14
4.2.6    EUT OPERATING CONDITIONS.................................................................. 14
4.2.7    TEST RESULTS............................................................................................ 15
5        PHOTOGRAPHS OF THE TEST CONFIGURATION ................................... 16
6        APPENDIX - INFORMATION ON THE TESTING LABORATORIES............. 18




Report No.: F88092308A                                    2                                        Issued: Apr. 20, 2001
Reference No.: 90032204


FCC ID: ARSCM569P


1 CERTIFICATION


           PRODUCT:       15” COLOR MONITOR
        BRAND NAME:       AOC
          MODEL NO:       5Vlr, 5V
            PART NO:      D560S
           TEST ITEM:     ENGINEERING SAMPLE
          APPLICANT:      TOP VICTORY ELECTRONICS CO., LTD.
         STANDARDS:       FCC Part 15, Subpart B, Class B
                          CISPR 22: 1997, Class B
                          ANSI C63.4-1992


We, Advance Data Technology Corporation, hereby certify that one sample
(model: 5Vlr) of the designation has been tested in our facility on Apr. 9, 2001.
The test record, data evaluation and Equipment Under Test (EUT) configurations
represented herein are true and accurate accounts of the measurements of the
sample's EMC characteristics under the conditions herein specified.




Report No.: F88092308A                    3                            Issued: Apr. 20, 2001
Reference No.: 90032204


FCC ID: ARSCM569P


2 SUMMARY OF TEST RESULTS

The EUT has been tested according to the following specifications:

          Standard              Test Type          Result           Remarks
                                                           Meets Class B Limit
   FCC Part 15,              Conducted Test           PASS Minimum passing margin
   Subpart B,                                              is –12.24 dB at 21.787 MHz
   CISPR 22: 1997,                                         Meets Class B Limit
   Class B                   Radiated Test            PASS Minimum passing margin
                                                           is –2.5 dB at 76.20 MHz

NOTE: For conducted emission test, the test limit used is according to FCC Part 15.107. In this part,
     conducted emission test for telecom port is not mentioned and therefore this item is not tested.




Report No.: F88092308A                            4                                  Issued: Apr. 20, 2001
Reference No.: 90032204


FCC ID: ARSCM569P


3       GENERAL INFORMATION

3.1     GENERAL DESCRIPTION OF EUT
    PRODUCT      15” COLOR MONITOR
    MODEL NO.    5Vlr, 5V
    PART NO.     D560S
                   Switching
    POWER SUPPLY Power Cord:
                   Nonshielded, 3 pin, AC (1.8m)
    DATA CABLE   NA

      NOTE: This is a Class II Permissive Change report. The main change is cancel
            OSD function.

               The EUT is a 15” color monitor with resolution up to 1280x1024.

               There is a ferrite core on the video cable outside the monitor.

               For a more detailed features description, please refer to the
               manufacturer's specifications or the User's Manual.



3.2 DESCRIPTION OF TEST MODES

    The EUT was pre-tested under the following resolution and horizontal
    synchronization speed mode:

    ♦   1280 x 1024 (60Hz/64kHz)
    ♦   1024 x 768 (85Hz/69kHz)
    ♦   640 x 480 (60Hz/31.5kHz)

    The worst emission level was found when the EUT was tested under 1280 x 1024
    (60Hz/64kHz) resolution, therefore the test data of this mode is recorded in the
    report.




Report No.: F88092308A                        5                             Issued: Apr. 20, 2001
Reference No.: 90032204


FCC ID: ARSCM569P




3.3         DESCRIPTION OF SUPPORT UNITS
The EUT has been tested as an independent unit together with other necessary
accessories or support units. The following support units or accessories were used to
form a representative test configuration during the tests.

      NO.      PRODUCT           BRAND          MODEL NO.         SERIAL NO.            FCC ID
                Personal
        1                           NTI          PI I-450T          P201141            FCC DoC
                Computer
        2       PRINTER            HP             2225C+          2949S63865         DSI6XU2225
        3        MODEM           ACEEX             1414            980020531         IFAXDM1414
        4        MOUSE          LOGITECH           M-S43         LZE00703197          DZL211106
                  PS/2
        5                       FORWARD         FDA-104GA        FDKB8110120         F4ZDA-104G
               KEYBOARD
        6       VGA Card        GAINWARD       CD-GX2A44T          GHF19516         ICUVGA-GW710

    NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS
    1        NA
    2        1.2m braid shielded wire, terminated with DB25 and Centronics connector via metallic
             frame, w/o core.
    3        1.2 m braid shielded wire, terminated with DB25 and DB9 connector via metallic frame,
             w/o core.
    4        1.5 m foil shielded wire, terminated with PS2 connector via drain wire, w/o core.
    5        1.5 m foil shielded wire, terminated with PS/2 connector via metallic frame, w/o core.
    6        NA

   NOTE: All power cords of the above support units are non shielded (1.8m).




Report No.: F88092308A                               6                                   Issued: Apr. 20, 2001
Reference No.: 90032204


FCC ID: ARSCM569P




4 EMISSION TEST

4.1     CONDUCTED EMISSION MEASUREMENT

4.1.1      LIMITS OF CONDUCTED EMISSION MEASUREMENT
                                     Class A (dBuV)                     Class B (dBuV)
      FREQUENCY (MHz)
                                  Quasi-peak   Average              Quasi-peak Average
            0.15 - 0.5               79          66                   66 - 56     56 - 46
            0.50 - 5.0               73          60                     56          46
            5.0 - 30.0               73          60                     60          50

  NOTES: (1) The lower limit shall apply at the transition frequencies.
             (2) The limit decreases in line with the logarithm of the frequency in the range of 0.15 to
                 0.50 MHz.
             (3) All emanations from a class A/B digital device or system, including any network of
                 conductors and apparatus connected thereto, shall not exceed the level of field
                 strengths specified above.


4.1.2      TEST INSTRUMENTS
           DESCRIPTION &                                                         CALIBRATED
                                  MODEL NO.                  SERIAL NO.
          MANUFACTURER                                                              UNTIL
   ROHDE & SCHWARZ Test
                                    ESHS30                    828109/007           July 6, 2001
   Receiver
   ROHDE & SCHWARZ Artificial
                                   ESH3-Z5                    839135/006           July 9, 2001
   Mains Network (for EUT)
   ROHDE & SCHWARZ
                                    ENY41                     837032/016          Nov. 28, 2001
   4-wire ISN
   ROHDE & SCHWARZ
                                    ENY22                     837497/016          Dec. 3, 2001
   2-wire ISN
   EMCO-L.I.S.N. (for peripheral)    3825/2                   9204-1964            July 9, 2001
   Software                        Cond-V2e                       NA                    NA
   RF cable (JYEBAO)               RG-58A/U                  Cable-C02.01          July 9, 2001
   HP Terminator (For EMCO LISN)    11593A                    E1-01-298           Feb. 20, 2002
   HP Terminator (For EMCO LISN)    11593A                    E1-01-299           Feb. 20, 2002
   Shielded Room                     Site 2                    ADT-C02                  NA
   VCCI Site Registration No.        Site 2                     C-240                   NA

  NOTE: 1.The measurement uncertainty is less than +/- 2.6dB, which is calculated as per the
          NAMAS document NIS81.
           2.The calibration interval of the above test instruments is 12 months and the calibrations are
             traceable to NML/ROC and NIST/USA.



Report No.: F88092308A                              7                                    Issued: Apr. 20, 2001
Reference No.: 90032204


FCC ID: ARSCM569P


4.1.3      TEST PROCEDURE
a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with
   EUT being connected to the power mains through a line impedance stabilization
   network (LISN). Other support units were connected to the power mains through
   another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the
   measuring instrument.

b. Both lines of the power mains connected to the EUT were checked for maximum
   conducted interference.

c. The frequency range from 150 kHz to 30 MHz was searched. Emission levels over
   10dB under the prescribed limits could not be reported.


4.1.4      DEVIATION FROM TEST STANDARD
No deviation


4.1.5      TEST SETUP

                          V e rtic a l R e fe re n c e
                          G ro u n d P la n e                                            Te s t R e c e iv e r


                          EUT
     40cm




                                                         80cm
      L IS N




                                                                     H o riz o n ta l R e f e r e n c e
                                                                      G r o u n d P la n e

       N o te : 1 .S u p p o r t u n its w e r e c o n n e c te d t o s e c o n d L IS N .
                 2 .B o th o f L IS N s ( A M N ) a r e 8 0 c m f ro m E U T a n d a t le a s t 8 0
                    fr o m o th e r u n its a n d o th e r m e ta l p la n e s




For the actual test configuration, please refer to the related item – Photographs of the
Test Configuration.

Report No.: F88092308A                                   8                                   Issued: Apr. 20, 2001
Reference No.: 90032204


FCC ID: ARSCM569P


4.1.6      EUT OPERATING CONDITIONS

           a.     Turn on the power of all equipment.
           b.     PC runs a test program to enable all functions.
           c.     PC reads and writes messages from FDD and HDD.
           d.     PC sends "H" messages to Color Monitor (EUT) and Color
                  Monitor displays "H" patterns on screen.
           e.     PC sends "H" messages to modem.
           f.     PC sends "H" messages to printer, and the printer prints them
                  on paper.
           g.     Repeat steps c-g.




Report No.: F88092308A                       9                          Issued: Apr. 20, 2001
Reference No.: 90032204


FCC ID: ARSCM569P


4.1.7      TEST RESULTS

   EUT                        15” COLOR MONITOR          MODEL                5Vlr

   MODE                       1280 x 1024(64KHz)         6dB BANDWIDTH        10 kHz

   INPUT POWER                120Vac, 60 Hz              PHASE                Line (L)

   ENVIRONMENTAL 21 deg. C, 80 % RH,                     TESTED BY:
   CONDITIONS    1050 hPa



                                    Reading          Emission
                          Corr.                                       Limit              Margin
   No
            Freq.                    Value             Level
                          Factor     [dB (uV)]       [dB (uV)]      [dB (uV)]              (dB)
           [MHz]           (dB)     Q.P.    AV.     Q.P.    AV.    Q.P.    AV.        Q.P.        AV.
     1     0.193           0.19    48.73     -     48.92     -    63.92 53.92        -15.00        -
     2     0.321           0.20    41.17     -     41.37     -    59.68 49.68        -18.31        -
     3     0.579           0.20    36.19     -     36.39     -    56.00 46.00        -19.61        -
     4     3.868           0.39    37.58     -     37.97     -    56.00 46.00        -18.03        -
     5     6.315           0.52    37.99     -     38.51     -    60.00 50.00        -21.49        -
     6     21.789          1.21    43.48     -     44.69     -    60.00 50.00        -15.31        -

  REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average
               individually.
           2. "-": The Quasi-peak reading value also meets average limit and measurement with
               the average detector is unnecessary.
           3. The emission levels of other frequencies were very low against the limit.
           4. Margin value = Emission level - Limit value
           5. Correction factor = Insertion loss + Cable loss
           6. Emission Level = Correction Factor + Reading Value.




Report No.: F88092308A                              10                                 Issued: Apr. 20, 2001
Reference No.: 90032204


FCC ID: ARSCM569P




   EUT                        15” COLOR MONITOR          MODEL                5Vlr

   MODE                       1280 x 1024(64KHz)         6dB BANDWIDTH        10 kHz

   INPUT POWER                120Vac, 60 Hz              PHASE                Neutral (N)

   ENVIRONMENTAL 21 deg. C, 80 % RH,                     TESTED BY:
   CONDITIONS    1050 hPa



                                    Reading          Emission
                          Corr.                                       Limit             Margin
   No
            Freq.                    Value             Level
                          Factor     [dB (uV)]       [dB (uV)]      [dB (uV)]              (dB)
           [MHz]           (dB)     Q.P.    AV.     Q.P.    AV.    Q.P.    AV.        Q.P.        AV.
     1     0.193           0.19    50.07     -     50.26     -    63.89 53.89        -13.63        -
     2     0.321           0.20    42.11     -     42.31     -    59.67 49.67        -17.36        -
     3     0.645           0.20    36.24     -     36.44     -    56.00 46.00        -19.56        -
     4     1.804           0.20    34.58     -     34.78     -    56.00 46.00        -21.22        -
     5     6.316           0.48    38.43     -     38.91     -    60.00 50.00        -21.09        -
     6     21.787          1.11    46.65     -     47.76     -    60.00 50.00        -12.24        -

  REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average
               individually.
           2. "-": The Quasi-peak reading value also meets average limit and measurement with
               the average detector is unnecessary.
           3. The emission levels of other frequencies were very low against the limit.
           4. Margin value = Emission level - Limit value
           5. Correction factor = Insertion loss + Cable loss
           6. Emission Level = Correction Factor + Reading Value.




Report No.: F88092308A                              11                                 Issued: Apr. 20, 2001
Reference No.: 90032204


FCC ID: ARSCM569P




4.2 RADIATED EMISSION MEASUREMENT

4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT
      FOR FREQUENCY BELOW 1000 MHz
                                       Class A (at 10m)                    Class B (at 10m)
     FREQUENCY (MHz)
                                                dBuV/m                         dBuV/m
             30 – 230                             40                              30
           230 - 1000                             47                              37


      LIMIT OF RADIATED EMISSION OF FCC PART 15, SUBPART B
      FOR FREQUENCY ABOVE 1000 MHz
   FREQUENCY (MHz)              Class A (dBuV/m) (at 3m)             Class B (dBuV/m) (at 3m)
                                  PEAK       AVERAGE                    PEAK      AVERAGE
         Above 1000                80.0         60.0                    74.0         54.0
    Note: (1) The lower limit shall apply at the transition frequencies.
           (2) Emission level (dBuV/m) = 20 log Emission level (uV/m).
          (3) All emanation from a class A/B digital device or system, including any
             network of conductors and apparatus connected thereto, shall not exceed the level of
             field strengths specified above.




Report No.: F88092308A                                 12                              Issued: Apr. 20, 2001
Reference No.: 90032204


FCC ID: ARSCM569P




4.2.2      TEST INSTRUMENTS
            DESCRIPTION &
                                          MODEL NO.         SERIAL NO.       CALIBRATED UNTIL
           MANUFACTURER
     HP Spectrum Analyzer                     8590L         3544A01042           April 16, 2002
     HP Preamplifier                          8447D         2944A08313           Sept. 25, 2001
    * HP Preamplifier                         8449B         3008A01201           Dec. 13, 2001
   * ROHDE & SCHWARZ TEST
                                            ESVS 30         841977/008            Oct. 11, 2001
      RECEIVER
     SCHWARZBECK Tunable                    VHA 9103         E101051
                                                                                 Nov. 23, 2001
     Dipole Antenna                         UHA 9105         E101055
    * ROHDE & SCHWARZ TEST                                  839013/007
                                              ESMI                                Jan. 25, 2002
     RECEIVER                                               839379/002
   * CHASE BILOG Antenna                   CBL6111A            1647               July 3, 2001
   * SCHWARZBECK Horn                      BBHA9120-
                                                        D130                      July 9, 2001
      Antenna                                  D1
   * EMCO Turn Table                          1016      1722                           NA
   * EMCO Tower                               1051      1825                           NA
    * Software                               AS61D       NA                            NA
    * ANRITSU RF Switches                    MP59B    M28342                      July 3, 2001
    * TIMES RF cable                        LMR-600 CABLE-ST4-01                  July 3, 2001
     Open Field Test Site                    Site 4   ADT-R04                     June 9, 2001
       VCCI Site Registration No.            Site 4    R-1038                          NA

  NOTE: 1.The measurement uncertainty is less than +/- 3.0dB, which is calculated as per the
          NAMAS document NIS81.
           2. The calibration interval of the above test instruments is 12 months. And the calibrations
              are traceable to NML/ROC and NIST/USA.
           3. “*” = These equipment are used for the final measurement.



4.2.3      TEST PROCEDURE
a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at
   a 10-meter open field site. The table was rotated 360 degrees to determine the
   position of the highest radiation.
b. The EUT was set 10 meters away from the interference-receiving antenna, which
   was mounted on the top of a variable-height antenna tower.
c. The antenna is a broadband antenna, and its height is varied from one meter to
   four meters above the ground to determine the maximum value of the field
   strength. Both horizontal and vertical polarizations of the antenna are set to make
   the measurement.
d. For each suspected emission, the EUT was arranged to its worst case and then
   the antenna was tuned to heights from 1 meter to 4 meters and the ratable table

Report No.: F88092308A                             13                                 Issued: Apr. 20, 2001
Reference No.: 90032204


FCC ID: ARSCM569P


   was turned from 0 degrees to 360 degrees to find the maximum reading.
e. The test-receiver system was set to Peak Detect Function and Specified
   Bandwidth with Maximum Hold Mode.
f. If the emission level of the EUT in peak mode was 10 dB lower than the limit
   specified, then testing could be stopped and the peak values of the EUT would be
   reported. Otherwise the emissions that did not have 10 dB margin would be re-
   tested one by one using the quasi- peak method or average method as specified
   and then reported In Data sheet peak mode and QP mode.
g. For measurement of frequency above 1000 MHz, the EUT was set 3 meters away
   from the interference antenna and the detect function was set to Peak or Average.


4.2.4      DEVIATION FROM TEST STANDARD
No deviation



4.2.5      TEST SETUP
                                          Ant. Tower
                                                                1-4m
                                                                Variable
                                 10m
       EUT&
       Support Units

                            Turn Table

           80cm


                                Ground Plane

                              Test Receiver




For the actual test configuration, please refer to the related item – Photographs of the
Test Configuration.


4.2.6 EUT OPERATING CONDITIONS
      Same as 4.1.6




Report No.: F88092308A                        14                           Issued: Apr. 20, 2001
Reference No.: 90032204


FCC ID: ARSCM569P


4.2.7      TEST RESULTS

   EUT                      15” COLOR MONITOR MODEL                     5Vlr

                                                   FREQUENCY
   MODE                     1280X1024 (64 kHz)                          30-2000 MHz
                                                   RANGE
                                                   DETECTOR
                                                                        Quasi-Peak, 120kHz
   INPUT POWER              120Vac, 60 Hz          FUNCTION &
                                                                        Peak, 1MHz
                                                   BANDWIDTH
   ENVIRONMENTAL 16 deg. C, 82 % RH,               TESTED BY:
   CONDITIONS    1050 hPa



          ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 10 M
                 Emission                 Antenna Table     Raw Antenna Cable Pre-Amp. Correction
         Freq.              Limit  Margin
  No.              Level                   Height   Angle   Value Factor Factor Factor  Factor
        (MHz)             (dBuV/m) (dB)
                 (dBuV/m)                   (m)   (Degree) (dBuV) (dB/m)  (dB)   (dB)   (dB/m)
   1     54.41    19.5 QP   30.00  -10.50 4.00H      301    37.79   7.11  1.58  27.00    18.32
   2    108.89    19.1 QP   30.00  -10.90 4.00H      316    33.66  10.68  1.79  27.00    14.53
   3    131.56    16.5 QP   30.00  -13.50 4.00H       32    30.05  11.51  1.97  27.00    13.52
   4    185.01    22.8 QP   30.00   -7.20  4.00H      1     39.21   8.53  2.08  27.00    16.39
   5    195.96    19.1 QP   30.00  -10.90 4.00H       50    35.55   8.43  2.09  27.00    16.48
   6    228.44    13.9 QP   30.00  -16.10 4.00H      327    28.40  10.39  2.15  27.00    14.46
   7    239.45    19.8 QP   37.00  -17.20 4.00H       71    33.57  11.07  2.17  27.00    13.77
   8    250.48    25.5 QP   37.00  -11.50 4.00H       38    38.43  11.86  2.19  27.00    12.95



            ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 10 M
                 Emission                 Antenna Table     Raw Antenna Cable Pre-Amp. Correction
         Freq.              Limit  Margin
  No.              Level                   Height   Angle   Value Factor Factor Factor  Factor
        (MHz)             (dBuV/m) (dB)
                 (dBuV/m)                   (m)   (Degree) (dBuV) (dB/m)  (dB)   (dB)   (dB/m)
   1     76.20    27.5 QP   30.00   -2.50  1.55V     358    46.08   6.88  1.58  27.00    18.54
   2     78.83    24.6 QP   30.00   -5.40  1.00V      1     42.66   7.39  1.57  27.00    18.04
   3    108.81    22.1 QP   30.00   -7.90  1.00V     317    36.81  10.55  1.76  27.00    14.69
   4    130.54    17.8 QP   30.00  -12.20 1.00V       59    31.36  11.45  1.95  27.00    13.60
   5    184.98    19.8 QP   30.00  -10.20 1.00V      351    36.22   8.53  2.08  27.00    16.39
   6    196.01    20.1 QP   30.00   -9.90  1.00V      53    36.54   8.43  2.09  27.00    16.48
   7    228.63    20.4 QP   30.00   -9.60  1.00V     328    34.87  10.39  2.15  27.00    14.46
   8    250.40    29.2 QP   37.00   -7.80  1.00V      65    42.18  11.86  2.19  27.00    12.95
   9    272.11    27.9 QP   37.00   -9.10  1.00V      1     40.30  12.34  2.26  27.00    12.40

  REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) – Correction Factor(dB)
           2. Correction Factor(dB/m) = Pre-Amplifier Factor (dB) - Antenna Factor
              (dB/m) - Cable Factor (dB)
           3. Pre-Amplifier Factor (dB) = 0, when the test receiver is used to read the
               value and because it did not use the Pre-Amplifier.
           4. The other emission levels were very low against the limit.
           5. Margin value = Emission level – Limit value.




Report No.: F88092308A                            15                               Issued: Apr. 20, 2001
Reference No.: 90032204


FCC ID: ARSCM569P




5 PHOTOGRAPHS OF THE TEST CONFIGURATION

                          CONDUCTED EMISSION TEST




Report No.: F88092308A              16              Issued: Apr. 20, 2001
Reference No.: 90032204


FCC ID: ARSCM569P




                          RADIATED EMISSION TEST




Report No.: F88092308A              17             Issued: Apr. 20, 2001
Reference No.: 90032204


FCC ID: ARSCM569P




6 APPENDIX - INFORMATION ON THE TESTING LABORATORIES
We, ADT Corp., were founded in 1988 to provide our best service in EMC and Safety
consultation. Our laboratories are accredited and approved by the following
approval agencies according to ISO/IEC 17025, Guide 25 or EN 45001:

   USA                    FCC, NVLAP
   Germany                TUV Rheinland
   Japan                  VCCI
   New Zealand            MoC
   Norway                 NEMKO, DNV
   U.K.                   INCHCAPE
   R.O.C.                 BSMI

Copies of accreditation certificates of our laboratories obtained from approval
agencies can be downloaded from our web site: www.adt.com.tw/index.5/phtml.
If you have any comments, please feel free to contact us at the following:

   Lin Kou EMC Lab:                       Hsin Chu EMC Lab:
   Tel: 886-2-26052180                    Tel: 886-35-935343
   Fax: 886-2-26052943                    Fax: 886-35-935342

   Lin Kou Safety Lab:                    Design Center:
   Tel: 886-2-26093195                    Tel: 886-2-26093195
   Fax: 886-2-26093184                    Fax: 886-2-26093184

   Email: service@mail.adt.com.tw
   Web Site: www.adt.com.tw

The address and road map of all our labs can be found in our web site also.




Report No.: F88092308A                       18                       Issued: Apr. 20, 2001
Reference No.: 90032204



Document Created: 2001-05-02 10:28:25
Document Modified: 2001-05-02 10:28:25

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC