AQZ-RF-7800W-RPG2

FCC ID

Equipment: The device is to be used in fixed and nomadic infrastructure for Ethernet data backhaul.

Harris Corporation RF Communications Division -RF-7800W-RPG2

221 Jefferson Ridge Parkway, Lynchburg, VA 24501 United States

Application
Frequency Range
Final Action Date
Granted
DcPsmWCkYJZZ6mGq2z0pNw==
5155.0-5247.5
2020-02-03
APPROVED
DcPsmWCkYJZZ6mGq2z0pNw==
5255.0-5345.0
2020-02-03
APPROVED
DcPsmWCkYJZZ6mGq2z0pNw==
5475.0-5720.0
2020-02-03
APPROVED
DcPsmWCkYJZZ6mGq2z0pNw==
5730.0-5845.0
2020-02-03
APPROVED
IeWTvT3lANzQdMC5EJk5yQ==
4942.5-4987.5
2020-02-03
APPROVED
IeWTvT3lANzQdMC5EJk5yQ==
4945.0-4985.0
2020-02-03
APPROVED
IeWTvT3lANzQdMC5EJk5yQ==
4950.0-4980.0
2020-02-03
APPROVED
File NameDocument TypeDateDirect
Test Report - UNII 3 - Part 2 (Revision)Test Report 2020-02-03 00:00:00 pdf
Test Report - UNII 3 - Part 1 (Revision)Test Report 2020-02-03 00:00:00 pdf
Test Report - UNII 2 - Part 3 (Revision)Test Report 2020-02-03 00:00:00 pdf
Test Report - UNII 2 - Part 2 (Revision)Test Report 2020-02-03 00:00:00 pdf
Test Report - UNII 2 - Part 1 (Revision)Test Report 2020-02-03 00:00:00 pdf
Test Report - DFS (Revision)Test Report 2020-02-03 00:00:00 pdf
Test Report - UNII 1 - Part 2 (Revision)Test Report 2020-02-03 00:00:00 pdf
Test Report - UNII 1 - Part 1 (Revision)Test Report 2020-02-03 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2020-02-03 00:00:00 pdf
Photo_Layout_Parts_List_MappingCover Letter(s) 2020-02-03 00:00:00 pdf
MIMO LetterCover Letter(s) 2020-02-03 00:00:00 pdf
Manufacturer AttestationCover Letter(s) 2020-02-03 00:00:00 pdf
Label_and_LocationID Label/Location Info 2020-02-03 00:00:00 pdf
External Radio PhotosExternal Photos 2020-02-03 00:00:00 pdf
External Radio and Antenna PhotosExternal Photos 2020-02-03 00:00:00 pdf
RF ExposureRF Exposure Info 2020-02-03 00:00:00 pdf
Test Report Part 2Test Report 2020-02-03 00:00:00 pdf
Test Report Part 1Test Report 2020-02-03 00:00:00 pdf
Cover LetterCover Letter(s) 2020-02-03 00:00:00 pdf
Confidentiality LetterCover Letter(s) 2020-02-03 00:00:00 pdf
MPERF Exposure Info 2020-02-03 00:00:00 pdf
Block_DiagramsBlock Diagram N/A
Internal Board PhotosInternal Photos N/A
Theory of OperationOperational Description N/A
Parts_ListParts List/Tune Up Info N/A
U-NII_Device_Security_AttestationSDR Software/Security Inf N/A
U-NII_Device_Security_Attestation_SupplementSDR Software/Security Inf N/A
Board LayoutSchematics N/A
Board SchematicSchematics N/A
Test Report - DFSTest Report 2020-02-03 00:00:00 N/A
Test Report - UNII 2 - Part 1Test Report 2020-02-03 00:00:00 N/A
Test Report - UNII 3 - Part 1Test Report 2020-02-03 00:00:00 N/A
Test Report - UNII 1 - Part 1Test Report 2020-02-03 00:00:00 N/A
Test Report - UNII 2 - Part 2Test Report 2020-02-03 00:00:00 N/A
Test Report - UNII 3 - Part 3Test Report 2020-02-03 00:00:00 N/A
Test Report - UNII 2 - Part 3Test Report 2020-02-03 00:00:00 N/A
Test Report - UNII 1 - Part 2Test Report 2020-02-03 00:00:00 N/A
Draft ManualUsers Manual N/A
Tune Up ProcedureParts List/Tune Up Info N/A

Application Details:

EquipmentThe device is to be used in fixed and nomadic infrastructure for Ethernet data backhaul.
FRN0004945812
Grantee CodeAQZ
Product Code-RF-7800W-RPG2
Applicant BusinessHarris Corporation RF Communications Division
Business Address221 Jefferson Ridge Parkway , Lynchburg,Virginia United States 24501
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantThomas Camper, Jr. – Regulatory Manager
Applicant Phone
Applicant Fax(434)455-6851
Applicant Email[email protected]
Applicant MailStop
Test FirmEurofins MET Laboratories, Inc.
Test Firm ContactJonathan Fuhrman
Test Firm Phone
Test Firm Fax4103543313
Test Firm Email[email protected]
Certified ByThomas D. Camper, Jr. – Regulatory Manager
Comment [DcPsmWCkYJZZ6mGq2z0pNw==]: Power output listed is conducted aggregated power. Professional Installation is required. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The device must be placed to provide a separation distance of at least 20 cm from all persons when the gain of the antenna is 13.5 dBi or less, a distance of at least 150 cm if the gain of the antenna is 26 dBi or less, or a distance of at least 230 cm if the gain of the antenna is 30 dBi or less. Professional Installation is required. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The device supports 5MHz, 10MHz, 20MHz and 40MHz bandwidth for 5.2G ,5.3G,5.6G,5.8G WLAN
Comment [IeWTvT3lANzQdMC5EJk5yQ==]: The Power Output listed is Peak Conducted. This Grant will become invalid upon any unapproved changes to the circuit board or components. Depending on the gain of the antenna; the device must be placed to provide a separation distance of at least 20 cm from all persons when the gain of the antenna is 8 dBi or less, a distance of at least 30 cm if the gain of the antenna is 13.5 dBi or less, or a distance of at least 120 cm if the gain of the antenna is 26 dBi or less, or a distance of at least 190 cm if the gain of the antenna is 30 dBi or less. Professional Installation is required. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC