Test Report DXX

FCC ID: APYHRO00278

Test Report

Download: PDF
FCCID_4484132

FCC RADIO TEST REPORT Report No. : FR960602-01D FCC RADIO TEST REPORT FCC ID : APYHRO00278 Equipment : Smart phone Brand Name : SHARP Applicant : SHARP CORPORATION 1 Takumi-cho, Sakai-ku, Sakai City, Osaka, Japan 590-8522 Manufacturer : SHARP CORPORATION 2-13-1, HACHIHONMATSU-IIDA, HIGASHI-HIROSHIMA-SHI, HIROSHIMA PREFECTURE 739-0192, JAPAN Standard : FCC Part 15 Subpart C §15.225 The product was received on Aug. 06, 2019 and testing was started from Aug. 21, 2019 and completed on Sep. 04, 2019. We, SPORTON INTERNATIONAL INC., EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any agency of government. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Reviewed by: Jones Tsai SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886-3-327-3456 Page Number : 1 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR960602-01D Table of Contents History of this test report ....................................................................................................................................3 Summary of Test Result......................................................................................................................................4 1. General Description ........................................................................................................................................5 1.1 Product Feature of Equipment Under Test ............................................................................................................. 5 1.2 Modification of EUT ................................................................................................................................................ 5 1.3 Testing Location ..................................................................................................................................................... 5 1.4 Applicable Standards.............................................................................................................................................. 5 2. Test Configuration of Equipment Under Test ...............................................................................................6 2.1 Descriptions of Test Mode ...................................................................................................................................... 6 2.2 Connection Diagram of Test System ...................................................................................................................... 7 2.3 Table for Supporting Units ...................................................................................................................................... 7 2.4 EUT Operation Test Setup ..................................................................................................................................... 7 3. Test Results .....................................................................................................................................................8 3.1 AC Power Line Conducted Emissions Measurement ............................................................................................. 8 3.2 20dB and 99% OBW Spectrum Bandwidth Measurement.................................................................................... 10 3.3 Frequency Stability Measurement ........................................................................................................................ 11 3.4 Field Strength of Fundamental Emissions and Mask Measurement ..................................................................... 12 3.5 Radiated Emissions Measurement ....................................................................................................................... 14 3.6 Antenna Requirements ......................................................................................................................................... 17 4. List of Measuring Equipment ...................................................................................................................... 18 5. Uncertainty of Evaluation ............................................................................................................................ 19 Appendix A. Test Results of Conducted Emission Test Appendix B. Test Results of Conducted Test Items B1. Test Result of 20dB Spectrum Bandwidth B2. Test Result of Frequency Stability Appendix C. Test Results of Radiated Test Items C1. Test Result of Field Strength of Fundamental Emissions 0. Results of Radiated Emissions (9 kHz~30MHz) C3. Results of Radiated Emissions (30MHz~1GHz) Appendix D. Setup Photographs TEL : 886-3-327-3456 Page Number : 2 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR960602-01D History of this test report Report No. Version Description Issued Date FR960602-01D 01 Initial issue of report Sep. 12, 2019 FR960602-01D 02 Revising company address of applicant Oct. 17, 2019 TEL : 886-3-327-3456 Page Number : 3 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR960602-01D Summary of Test Result Report Ref Std. Result Test Items Remark Clause Clause (PASS/FAIL) Under limit 3.1 15.207 AC Power Line Conducted Emissions Pass 10.68 dB at 27.121MHz 15.215(c) 20dB Spectrum Bandwidth Pass - 3.2 2.1049 99% OBW Spectrum Bandwidth Reporting only - 3.3 15.225(e) Frequency Stability Pass - Max level 3.4 15.225(a)(b)(c) Field Strength of Fundamental Emissions Pass 11.93 dBμV/m at 13.560 MHz Under limit 15.225(d) 3.5 Radiated Spurious Emissions Pass 9.08 dB at 15.209 956.600MHz 3.6 15.203 Antenna Requirements Pass - Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Reviewed by: Wii Chang Report Producer: Ann Lee TEL : 886-3-327-3456 Page Number : 4 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR960602-01D 1. General Description 1.1 Product Feature of Equipment Under Test GSM/WCDMA/LTE, Bluetooth, Wi-Fi 2.4GHz 802.11b/g/n, Wi-Fi 5GHz 802.11a/n/ac, NFC, and GNSS. Product Specification subjective to this standard WWAN: Fixed Internal Antenna WLAN: PIFA Antenna Antenna Type Bluetooth: PIFA Antenna GPS / Glonass / BDS / Galileo: PIFA Antenna NFC: Loop Antenna 1.2 Modification of EUT No modifications are made to the EUT during all test items. 1.3 Testing Location Test Site SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) Test Site Location TEL: +886-3-327-3456 FAX: +886-3-328-4978 Sporton Site No. Test Site No. TH03-HY CO05-HY 03CH07-HY Test Engineer Benjamin Lin Jimmy Chang Ken Wu Temperature 22~24°C 24~26°C 25.2~28.1°C Relative Humidity 53~55% 54~56% 57~60% Note: The test site complies with ANSI C63.4 2014 requirement. FCC designation No.: TW1190 and TW0007 1.4 Applicable Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  FCC Part 15 Subpart C §15.225  FCC KDB 414788 D01 Radiated Test Site v01r01  ANSI C63.10-2013 TEL : 886-3-327-3456 Page Number : 5 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR960602-01D 2. Test Configuration of Equipment Under Test 2.1 Descriptions of Test Mode Investigation has been done on all the possible configurations. The following table is a list of the test modes shown in this test report. Test Items AC Power Line Conducted Emissions Field Strength of Fundamental Emissions 20dB Spectrum Bandwidth Frequency Stability Radiated Emissions 9kHz~30MHz Radiated Emissions 30MHz~1GHz The EUT pre-scanned in four NFC type, A, B, F, V. The worst type (type F) was recorded in this report. Pre-scanned tests, X, Y, Z in three orthogonal panels to determine the final configuration (Y plane as worst plane) from all possible combinations. Test Cases AC Conducted Mode 1 : NFC Tx + USB Cable (Charging from AC Adapter) + Earphone Emission Remark: For Radiated Test Cases, the tests were performed with Adapter 4 TEL : 886-3-327-3456 Page Number : 6 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR960602-01D 2.2 Connection Diagram of Test System 2.3 Table for Supporting Units Item Equipment Trade Name Model Name FCC ID Data Cable Power Cord 1. iPod Earphone Apple A1285 FCC DoC Unshielded, 1.2 m N/A 2.4 EUT Operation Test Setup The EUT was programmed to be in continuously transmitting mode. The utility “adb command line” was installed in EUT which was programmed in order to make the EUT (NFC) continuously transmit at 13.56MHz. TEL : 886-3-327-3456 Page Number : 7 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR960602-01D 3. Test Results 3.1 AC Power Line Conducted Emissions Measurement 3.1.1 Limit of AC Conducted Emission For equipment that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits in the following table. Frequency of Emission Conducted Limit (dBμV) (MHz) Quasi-Peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 *Decreases with the logarithm of the frequency. 3.1.2 Measuring Instruments See list of measuring equipment of this test report. 3.1.3 Test Procedures 1. The EUT was placed 0.4 meter from the conducting wall of the shielding room, and it was kept at least 80 centimeters from any other grounded conducting surface. 2. Connect EUT to the power mains through a line impedance stabilization network (LISN). 3. All the support units are connecting to the other LISN. 4. The LISN provides 50 ohm coupling impedance for the measuring instrument. 5. The FCC states that a 50 ohm, 50 microhenry LISN should be used. 6. Both sides of AC line were checked for maximum conducted interference. 7. The frequency range from 150 kHz to 30 MHz was searched. 8. Set the test-receiver system to Peak Detect Function and specified bandwidth (IF Bandwidth = 9kHz) with Maximum Hold Mode. Then measurement is also conducted by Average Detector and Quasi-Peak Detector Function respectively. TEL : 886-3-327-3456 Page Number : 8 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR960602-01D 3.1.4 Test setup 3.1.5 Test Result of AC Conducted Emission Please refer to Appendix A. Note: (1) with antenna Remark: 13.560MHz is the NFC RF fundamental signal. (2) with dummy load Remark: Only the fundamental NFC signal needs to be retested per C63.4. TEL : 886-3-327-3456 Page Number : 9 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR960602-01D 3.2 20dB and 99% OBW Spectrum Bandwidth Measurement 3.2.1 Limit Intentional radiators must be designed to ensure that the 20dB and 99% emission bandwidth in the specific band 13.553~13.567MHz. 3.2.2 Measuring Instruments See list of measuring instruments of this test report. 3.2.3 Test Procedures 1. The spectrum analyzer connected via a receive antenna placed near the EUT in peak Max hold mode. 2. The resolution bandwidth of 1 kHz and the video bandwidth of 3 kHz were used. 3. Measured the spectrum width with power higher than 20dB below carrier. 4. Measured the 99% OBW. 3.2.4 Test Setup 3.2.5 Test Result of Conducted Test Items Please refer to Appendix B. TEL : 886-3-327-3456 Page Number : 10 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR960602-01D 3.3 Frequency Stability Measurement 3.3.1 Limit The frequency tolerance of the carrier signal shall be maintained within +/- 0.01% (100ppm) of the operating frequency over a temperature variation of -20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. 3.3.2 Measuring Instruments See list of measuring instruments of this test report. 3.3.3 Test Procedures 1. The spectrum analyzer connected via a receive antenna placed near the EUT. 2. EUT have transmitted signal and fixed channelize. 3. Set the spectrum analyzer span to view the entire emissions bandwidth. 4. Set RBW = 1 kHz, VBW = 3 kHz with peak detector and maxhold settings. 6 5. The fc is declaring of channel frequency. Then the frequency error formula is (fc-f)/fc × 10 ppm and the limit is less than ±100ppm. 6. Extreme temperature rule is -20°C~50°C. 3.3.4 Test Setup 3.3.5 Test Result of Conducted Test Items Please refer to Appendix B. TEL : 886-3-327-3456 Page Number : 11 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR960602-01D 3.4 Field Strength of Fundamental Emissions and Mask Measurement 3.4.1 Limit Rules and specifications FCC CFR 47 Part 15 section 15.225 Description Compliance with the spectrum mask is tested with RBW set to 9kHz. Field Strength Field Strength Field Strength Field Strength Freq. of Emission (MHz) (μV/m) at 30m (dBμV/m) at 30m (dBμV/m) at 10m (dBμV/m) at 3m 1.705~13.110 30 29.5 48.58 69.5 13.110~13.410 106 40.5 59.58 80.5 13.410~13.553 334 50.5 69.58 90.5 13.553~13.567 15848 84.0 103.08 124.0 13.567~13.710 334 50.5 69.58 90.5 13.710~14.010 106 40.5 59.58 80.5 14.010~30.000 30 29.5 48.58 69.5 3.4.2 Measuring Instruments See list of measuring instruments of this test report. TEL : 886-3-327-3456 Page Number : 12 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR960602-01D 3.4.3 Test Procedures 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the loop receiving antenna mounted antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the receiving antenna was fixed at one meter above ground to find the maximum emissions field strength. 4. For Fundamental emissions, use the receiver to measure QP reading. 5. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 6. Compliance with the spectrum mask is tested with RBW set to 9kHz. Note: Emission level (dBμV/m) = 20 log Emission level (μV/m). 3.4.4 Test Setup For radiated emissions below 30MHz 3.4.5 Test Result of Field Strength of Fundamental Emissions and Mask Please refer to Appendix C. TEL : 886-3-327-3456 Page Number : 13 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR960602-01D 3.5 Radiated Emissions Measurement 3.5.1 Limit The field strength of any emissions which appear outside of 13.110 ~14.010MHz band shall not exceed the general radiated emissions limits. Frequencies Field Strength Measurement Distance (MHz) (μV/m) (meters) 0.009~0.490 2400/F(kHz) 300 0.490~1.705 24000/F(kHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 3.5.2 Measuring Instruments See list of measuring instruments of this test report. 3.5.3 Measuring Instrument Setting The following table is the setting of receiver: Receiver Parameter Setting Attenuation Auto Frequency Range: 9kHz~150kHz RBW 200Hz for QP Frequency Range: 150kHz~30MHz RBW 9kHz for QP Frequency Range: 30MHz~1000MHz RBW 120kHz for Peak Note: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90 kHz and 110-490 kHz. Radiated emission limits in these two bands are based on measurements employing an average detector. TEL : 886-3-327-3456 Page Number : 14 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR960602-01D 3.5.4 Test Procedures 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 6. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 7. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the recorded data should be QP measured by receiver. TEL : 886-3-327-3456 Page Number : 15 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR960602-01D 3.5.5 Test Setup For radiated emissions below 30MHz For radiated emissions above 30MHz 3.5.6 Test Result of Radiated Emissions Measurement Please refer to Appendix C. Remark: There is a comparison data of both open-field test site and alternative test site - semi-Anechoic chamber according to 414788 D01 Radiated Test Site v01r01, and the result came out very similar. TEL : 886-3-327-3456 Page Number : 16 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR960602-01D 3.6 Antenna Requirements 3.6.1 Standard Applicable Except for special regulations, the Low-power Radio-frequency Devices must not be equipped with any jacket for installing an antenna with extension cable. An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that the user can replace a broken antenna, but the use of a standard antenna jack or electrical connector is prohibited. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the rule. 3.6.2 Antenna Anti-Replacement Construction An embedded-in antenna design is used. TEL : 886-3-327-3456 Page Number : 17 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

somov «. _FCC RADIO TEST REPORT Report No. : FR960602—01D 4. List of Measuring Equipment . Characteristic| Calibration Instrument Manufacturer Model No. Serial No. s Date Test Date Due Date Remark AC Power Source| ChainTek APC—1000W N/A N/A N/A Sep. P. 04, 0% 2019 N/A Conduction (coos—Hy) est Recei EMI Test Receiver Rohde & ESA3 102388 2~8. 9kHz~3.6GHz 2 Nov. Nov. 12, 12, 2018 Sep. ep. 04, 04, 2019 Nov. ov. 18, 18, 2020 Conduction Schwarz P (GOO5—HY) Rohde & Conduction LISN ENV216 100080 9kHz~30MHz Nov. 14, 2018 Sep. 04, 2019 Nov. 13, 2019 Schwarz (GOO5—HY) ducti Software Rohde & Schwarz EMCS2 V10.30 N/A N/A N/A Sep. 04, 2019 N/A Conduction (GOO5—HY) ducti LF Cable HUBER + RG—214/U LFO1 N/A Dec. 31, 2018 Sep. 04, 2019 Dec. 30, 2019 Conduction SUHNER (COO5—HY) 10. Rohde & Conduction Pulse Limiter ESH3—Z2 100851 N/A Dec. 31, 2018 Sep. 04, 2019 Dec. 30, 2019 Schwarz (GOO5—HY) Conducted AC Power Source| AC POWER AFC—500W [F104070011] 50Hz~60Hz Apr. 12, 2019 Aug.21, 2019 Apr. 11, 2020 (Thoshy) Spectrum Rohde & Conducted FSP30 101067 9KHz~30GHz Jun. 13, 2019 Aug.21, 2019 Jun. 12, 2020 Analyzer Schwarz (THO3—HY) Te t Conducted emporature Esrec su—e4t 92013721 300 ~70°C Nov. 28, 2018 Aug.21, 2019 Nov. 27, 2019 DTCCCC Chamber (THO3—HY) CBL 6111D & has . Radiation Bilog Antenna TESEQ 00800N1D01 35419 & 03 3OMHz~1GHz Apr. 30, 2019 Aug. 21, 2019 Apr. 29, 2020 (O3CHO7—HY) N—06 ~26. Radiation EMI Test Receiver Agilent N9038A(MXE MY5329005 20H2~26.5GH Jan. 23, 2019 Aug. 21, 2019 Jan. 22, 2020 ) 3 z (O3CHOT—HY) Rohde & Radiation Loop Antenna HFH2—22 100315 [9 kHz~30 MHz| Jan. 11, 2019 Aug. 21, 2019 Jan. 10, 2020 Schwarz (O3CHO7—HY) L2 Radiation Preamplifier COM—POWER PA—103A 161241 10MHz~1GHz May 20, 2019 Aug. 21, 2019 May 19, 2020 (O3CHOT—HY) HUBER + SUCOFLEX |MY249714, Radiation RF Cable 9kHz~30MHz Feb. 26, 2019 Aug. 21, 2019 Feb. 25, 2020 SUHNER 104 MY2865574 (O3CHO7—HY) MY2865574 HUBER UCOFLEX ‘ Radiati RF Cable SUHNEI:{- S C104 MY24971/4, 3OMHz~1GHz Feb. 26, 2019 Aug. 21, 2019 Feb. 25, 2020 OSSHI(?;OI:Y MY156824 ( HY) . E3 8050400465 Radiation Software Audix N/A N/A Aug. 21, 2019 N/A 6.2009—8—24 6H (O3CHO7—HY) Radiation Antenna Mast Max—Full MFA520BS N/A 1m~4m N/A Aug. 21, 2019 N/A (O3CHOT—HY) . Chaintek Radiation Turn Table ChainTek N/A 0~360 Degree N/A Aug. 21, 2019 N/A 3000 (O3CHO7—HY) TEL : 886—3—327—3456 Page Number : 18 of 19 FAX : 886—3—328—4978 Issued Date : Oct. 17, 2019 Report Template No.: BUS—FR15CNFC Version 2.4 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR960602-01D 5. Uncertainty of Evaluation Uncertainty of Conducted Emission Measurement (150 kHz ~ 30 MHz) Measuring Uncertainty for a Level of Confidence 2.20 of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (9 kHz ~ 30 MHz) Measuring Uncertainty for a Level of Confidence 3.4 of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (30 MHz ~ 1000 MHz) Measuring Uncertainty for a Level of Confidence 5.7 of 95% (U = 2Uc(y)) TEL : 886-3-327-3456 Page Number : 19 of 19 FAX : 886-3-328-4978 Issued Date : Oct. 17, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 02

somov «. _FCC RADIO TEST REPORT Report No. : FR960602—01D Appendix A. Test Results of Conducted Emission Test Temperature : 24~26°C |Test Engineer : |Jimmy Chang Relative Humidity : |54~56% TEL : 886—3—327—3456 Page Number : A1 of Ad FAX : 886—3—328—4978

<Original> EUT Information Report NO : 960602-01 Test Mode : Mode 1 Test Voltage : 120Vac/60Hz Phase : Line F u ll S p e c tru m 100 90 80 70 C IS P R -Q P L im it a t M a in P o rts Level in dBuV 60 C IS P R -A v e L im it a t M a in P o rts 50 40 30 20 10 0 150k 3 0 0 4 0 05 0 0 8 0 01 M 2M 3M 4M 5M 6 8 10M 20M 30M F re q u e n c y in H z Final_Result Frequency QuasiPeak CAverage Limit Margin Line Filter Corr. (MHz) (dBuV) (dBuV) (dBuV) (dB) (dB) 0.197250 --- 25.18 53.73 28.55 L1 OFF 19.4 0.197250 30.59 --- 63.73 33.14 L1 OFF 19.4 0.438000 --- 27.50 47.10 19.60 L1 OFF 19.4 0.438000 37.75 --- 57.10 19.35 L1 OFF 19.4 1.119750 --- 26.80 46.00 19.20 L1 OFF 19.5 1.119750 30.45 --- 56.00 25.55 L1 OFF 19.5 1.952250 --- 26.21 46.00 19.79 L1 OFF 19.5 1.952250 31.35 --- 56.00 24.65 L1 OFF 19.5 4.031250 --- 25.80 46.00 20.20 L1 OFF 19.6 4.031250 27.91 --- 56.00 28.09 L1 OFF 19.6 7.197000 --- 25.57 50.00 24.43 L1 OFF 19.7 7.197000 27.31 --- 60.00 32.69 L1 OFF 19.7 13.560000 --- 49.98 50.00 0.02 L1 OFF 19.9 13.560000 55.82 --- 60.00 4.18 L1 OFF 19.9 27.120000 --- 38.23 50.00 11.77 L1 OFF 20.3 27.120000 41.52 --- 60.00 18.48 L1 OFF 20.3

EUT Information Report NO : 960602-01 Test Mode : Mode 1 Test Voltage : 120Vac/60Hz Phase : Neutral F u ll S p e c tru m 100 90 80 70 C IS P R -Q P L im it a t M a in P o rts Level in dBuV 60 C IS P R -A v e L im it a t M a in P o rts 50 40 30 20 10 0 150k 3 0 0 4 0 05 0 0 8 0 01 M 2M 3M 4M 5M 6 8 10M 20M 30M F re q u e n c y in H z Final_Result Frequency QuasiPeak CAverage Limit Margin Line Filter Corr. (MHz) (dBuV) (dBuV) (dBuV) (dB) (dB) 0.402000 --- 28.29 47.81 19.52 N OFF 19.5 0.402000 37.85 --- 57.81 19.96 N OFF 19.5 0.521250 --- 27.05 46.00 18.95 N OFF 19.5 0.521250 36.24 --- 56.00 19.76 N OFF 19.5 0.921750 --- 25.81 46.00 20.19 N OFF 19.5 0.921750 33.56 --- 56.00 22.44 N OFF 19.5 5.003250 --- 25.26 50.00 24.74 N OFF 19.7 5.003250 27.62 --- 60.00 32.38 N OFF 19.7 8.254500 --- 25.54 50.00 24.46 N OFF 19.8 8.254500 27.14 --- 60.00 32.86 N OFF 19.8 13.560000 --- 52.53 50.00 -2.53 N OFF 20.0 13.560000 59.50 --- 60.00 0.50 N OFF 20.0 27.120750 --- 39.32 50.00 10.68 N OFF 20.5 27.120750 47.20 --- 60.00 12.80 N OFF 20.5

<Terminal> EUT Information Report NO : 960602-01 Test Mode : Mode 1 Test Voltage : 120Vac/60Hz Phase : Line F u ll S p e c tru m 100 90 80 70 C IS P R -Q P L im it a t M a in P o rts Level in dBuV 60 C IS P R -A v e L im it a t M a in P o rts 50 40 30 20 10 0 150k 3 0 0 4 0 05 0 0 8 0 01 M 2M 3M 4M 5M 6 8 10M 20M 30M F re q u e n c y in H z Final_Result Frequency QuasiPeak CAverage Limit Margin Line Filter Corr. (MHz) (dBuV) (dBuV) (dBuV) (dB) (dB) 13.560000 --- 25.66 50.00 24.34 L1 OFF 19.9 13.560000 28.60 --- 60.00 31.40 L1 OFF 19.9

EUT Information Report NO : 960602-01 Test Mode : Mode 1 Test Voltage : 120Vac/60Hz Phase : Neutral F u ll S p e c tru m 100 90 80 70 C IS P R -Q P L im it a t M a in P o rts Level in dBuV 60 C IS P R -A v e L im it a t M a in P o rts 50 40 30 20 10 0 150k 3 0 0 4 0 05 0 0 8 0 01 M 2M 3M 4M 5M 6 8 10M 20M 30M F re q u e n c y in H z Final_Result Frequency QuasiPeak CAverage Limit Margin Line Filter Corr. (MHz) (dBuV) (dBuV) (dBuV) (dB) (dB) 13.560000 --- 26.84 50.00 23.16 N OFF 20.0 13.560000 32.01 --- 60.00 27.99 N OFF 20.0

FCC RADIO TEST REPORT Report No. : FR960602-01D Appendix B. Test Results of Conducted Test Items B1. Test Result of 20dB Spectrum Bandwidth Test mode NFC Tx Test Frequency (MHz) 13.56 * RBW 1 kHz Marker 1 [T1 ] * RBW 1 kHz Marker 1 [T1 ] * VBW 3 kHz -9.13 dBm * VBW 3 kHz -9.16 dBm Ref 10 dBm * Att 30 dB * SWT 20 ms 13.560020000 MHz Ref 10 dBm * Att 30 dB * SWT 20 ms 13.560020000 MHz 10 ndB [T1] 20.00 dB 10 OBW 2.240000000 kHz BW 2.640000000 kHz Temp 1 [T1 OBW] Temp 1 [T1 ndB] A -23.72 dBm A 0 0 -29.11 dBm 13.558860000 MHz 1 AP 1 1 AP 1 13.558660000 MHz Temp 2 [T1 OBW] VIEW VIEW -10 Temp 2 [T1 ndB] -10 -23.64 dBm -29.30 dBm 13.561100000 MHz 13.561300000 MHz -20 -20 T1 T2 T1 T2 -30 -30 -40 -40 3DB 3DB -50 -50 -60 -60 -70 -70 -80 -80 -90 -90 Center 13.56 MHz 1 kHz/ Span 10 kHz Center 13.56 MHz 1 kHz/ Span 10 kHz Date: 21.AUG.2019 09:16:22 Date: 21.AUG.2019 09:17:18 20dB Bandwidth (kHz) 2.640 99% OccupiedBW(kHz) 2.240 fL＞13.553 13.55866 Test Result Frequency range (MHz) fH＜13.567 13.56130 Complies Remark: Because the measured signal is CW adjusting the RBW per C63.10 would not be practical since measured bandwidth will always follow the RBW and the result will be approximately twice the RBW. TEL : 886-3-327-3456 Page Number : B1 of B3 FAX : 886-3-328-4978

somov «. _FCC RADIO TEST REPORT Report No. : FR960602—01D B2. Test Result of Frequency Stability B3. Voltage vs. Frequency Stability Temperature vs. Frequency Stability Voltage (Vac) Measurement Temperature (°C) Time Measurement Frequency (MHz) Frequency (MHz) 120 13.559980 —20 0 13.559980 102 13.559980 2 13.559980 138 13.559980 5 13.559980 10 13.559980 —10 0 13.559980 2 13.559980 5 13.559980 10 13.559980 0 0 13.559970 2 13.559980 5 13.559970 10 13.559980 10 0 13.559970 2 13.559980 5 13.559980 10 13.559970 20 0 13.559980 2 13.559970 5 13.559970 10 13.559970 30 0 13.559980 2 13.559980 5 13.559970 10 13.559970 40 0 13.559980 2 13.559980 5 13.559970 10 13.559970 TEL : 886—3—327—3456 Page Number : B2 of B3 FAX : 886—3—328—4978

seomov «. FCC RADIO TEST REPORT Report No. : FR960602—01D Voltage vs. Frequency Stability Temperature vs. Frequency Stability Voltage (Vac) Measurement Temperature (C) aine Measurement Frequency (MHz) Frequency (MHz) 50 0 13.559970 2 13.559980 5 13.559980 10 13.559980 Max.Deviation (MHz) —0.000020 Max.Deviation (MHz) —0.000030 Max.Deviation (ppm) —1.4749 Max.Deviation (ppm) —2.2124 Limit FS < £100 ppm Limit FS < £100 ppm Test Result PASS Test Result PASS TEL : 886—3—327—3456 Page Number : B3 of B3 FAX : 886—3—328—4978

FCC RADIO TEST REPORT Report No. : FR960602-01D Appendix C. Test Results of Radiated Test Items C1. Test Result of Field Strength of Fundamental Emissions Test Mode: NFC Tx Test Frequency (MHz) 13.56 Distance Frequency Level Over Limit Read Antenna Cable Ant Table Remark extrapolation Factor Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 13.56 11.93 40 -72.07 84 31.57 19.8 0.56 100 11 QP TEL : 886-3-327-3456 Page Number : C1 of C6 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR960602-01D Test Mode: NFC Tx Test Frequency (MHz) 13.56 Distance Frequency Level Over Limit Read Antenna Cable Ant Table Remark extrapolation Factor Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 13.56 8.49 40 -75.51 84 28.13 19.8 0.56 100 263 QP TEL : 886-3-327-3456 Page Number : C2 of C6 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR960602-01D C2. Results of Radiated Spurious Emissions (9 kHz~30MHz) Test Mode : NFC Tx Polarization : Horizontal Distance Frequency Level Over Limit Read Antenna Cable Ant Table Remark extrapolation Factor Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 0.00925 -6.35 80 -54.63 48.28 53.08 20.01 0.56 - - Average 0.07374 -29.54 80 -59.79 30.25 30 19.9 0.56 - - Average 0.10222 -36.87 80 -64.28 27.41 22.68 19.89 0.56 - - QP 0.11304 -20.66 80 -47.2 26.54 38.89 19.89 0.56 - - Average 0.15068 -26.56 80 -50.6 24.04 33.04 19.84 0.56 - - Average 1.601 -6.96 40 -30.47 23.51 12.67 19.81 0.56 100 0 QP 10.904 -4.55 40 -34.05 29.5 15.15 19.74 0.56 - - QP 13.56 11.44 40 -18.06 29.5 31.08 19.8 0.56 - - QP 24.343 -3.01 40 -32.51 29.5 15.4 20.4 1.19 - - QP 29.91 -3.17 40 -32.67 29.5 15.51 20.13 1.19 - - QP TEL : 886-3-327-3456 Page Number : C3 of C6 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR960602-01D Test Mode : NFC Tx Polarization : Vertical Distance Frequency Level Over Limit Read Antenna Cable Ant Table Remark extrapolation Factor Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 0.00931 -5.76 80 -53.99 48.23 53.67 20.01 0.56 - - Average 0.07425 -31.04 80 -61.23 30.19 28.5 19.9 0.56 - - Average 0.09316 -39.24 80 -67.46 28.22 20.31 19.89 0.56 - - QP 0.11096 -19.23 80 -45.93 26.7 40.32 19.89 0.56 - - Average 0.15136 -28.53 80 -52.53 24 31.07 19.84 0.56 - - Average 1.639 -6.16 40 -29.47 23.31 13.47 19.81 0.56 100 0 QP 10.448 -5.05 40 -34.55 29.5 14.65 19.74 0.56 - - QP 13.56 7.26 40 -22.24 29.5 26.9 19.8 0.56 - - QP 23.893 -2.76 40 -32.26 29.5 15.68 20.37 1.19 - - QP 27.355 -2.33 40 -31.83 29.5 16.03 20.45 1.19 - - QP Note: 1. 13.56 MHz is fundamental signal which can be ignored. 2. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 3. Distance extrapolation factor = 40 log (specific distance / test distance) (dB); 4. Limit line = specific limits (dBμV) + distance extrapolation factor. TEL : 886-3-327-3456 Page Number : C4 of C6 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR960602-01D C3. Results of Radiated Spurious Emissions (30MHz~1GHz) Test Mode : NFC Tx Polarization : Horizontal Frequency Level Over Limit Read Antenna Cable Preamp Ant Table Remark Limit Line Level Factor Loss Factor Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( dB ) ( cm ) ( deg ) 30.54 24.5 -15.5 40 29.08 24.09 1.19 29.98 - - Peak 81.3 19.73 -20.27 40 34.65 13.4 1.55 29.99 - - Peak 156.9 20.7 -22.8 43.5 31.66 16.71 2.07 29.91 - - Peak 757.8 32.43 -13.57 46 28.66 27.82 4.18 29.41 - - Peak 862.1 34.34 -11.66 46 28.45 29.02 4.63 29.06 - - Peak 956.6 36.92 -9.08 46 28.11 30.69 4.74 28.52 100 0 Peak TEL : 886-3-327-3456 Page Number : C5 of C6 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR960602-01D Test Mode : NFC Tx Polarization : Vertical Frequency Level Over Limit Read Antenna Cable Preamp Ant Table Remark Limit Line Level Factor Loss Factor Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( dB ) ( cm ) ( deg ) 40.8 24.54 -15.46 40 34.4 18.81 1.19 29.99 - - Peak 54.3 24.32 -15.68 40 40.33 12.67 1.19 29.99 - - Peak 81.3 27.03 -12.97 40 41.95 13.4 1.55 29.99 - - Peak 757.8 31.82 -14.18 46 28.05 27.82 4.18 29.41 - - Peak 849.5 33.97 -12.03 46 28.55 28.76 4.48 29.11 - - Peak 955.2 36.38 -9.62 46 27.65 30.64 4.74 28.53 100 0 Peak Note: 1. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 2. Emission level (dBμV/m) = 20 log Emission level (μV/m). 3. Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor= Level. TEL : 886-3-327-3456 Page Number : C6 of C6 FAX : 886-3-328-4978


Document Created: 2019-10-29 15:33:44
Document Modified: 2019-10-29 15:33:44
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC