Test Report

FCC ID: APYHRO00274

Test Report

Download: PDF
FCCID_4427838

FCC Test Report Report No.: FC190617E03B FCC ID: APYHRO00274 Received Date: July 09, 2019 Test Date: July 24 to Aug. 30, 2019 Issued Date: Aug. 30, 2019 Applicant: Sharp Corporation Address: 1 Takumi-cho, Sakai-ku, Sakai City Osaka, 590-8522 Japan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location (1): E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. FCC Registration / 810758 / TW1085 for Test Location (1) Designation Number: 960022 / TW1058 for Test Location (2) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: FC190617E03B Page No. 1 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ......................................................................................................................... 4 2 Summary of Test Results......................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information. ................................................................................................................................ 6 3.1 Description of EUT .............................................................................................................................. 6 3.2 Features of EUT .................................................................................................................................. 6 3.3 Operating Modes of EUT and Determination of Worst Case Operating Mode ................................... 7 3.4 Test Program Used and Operation Descriptions ................................................................................. 8 3.5 Primary Clock Frequencies of Internal Source ................................................................................... 8 4 Configuration and Connections with EUT ............................................................................................. 9 4.1 Connection Diagram of EUT and Peripheral Devices ......................................................................... 9 4.2 Configuration of Peripheral Devices and Cable Connections ........................................................... 10 5 Conducted Emissions at Mains Ports ................................................................................................... 11 5.1 Limits .................................................................................................................................................. 11 5.2 Test Instruments ................................................................................................................................. 11 5.3 Test Arrangement .............................................................................................................................. 12 5.4 Supplementary Information ............................................................................................................... 12 5.5 Test Results ....................................................................................................................................... 13 6 Radiated Emissions up to 1 GHz .......................................................................................................... 17 6.1 Limits ................................................................................................................................................. 17 6.2 Test Instruments ................................................................................................................................ 18 6.3 Test Arrangement .............................................................................................................................. 20 6.4 Supplementary Information ............................................................................................................... 20 6.5 Test Results ....................................................................................................................................... 21 7 Radiated Emissions above 1 GHz......................................................................................................... 25 7.1 Limits ................................................................................................................................................. 25 7.2 Test Instruments ................................................................................................................................ 26 7.3 Test Arrangement .............................................................................................................................. 27 7.4 Supplementary Information ............................................................................................................... 27 7.5 Test Results ....................................................................................................................................... 28 8 Pictures of Test Arrangements ............................................................................................................. 32 Appendix – Information of the Testing Laboratories ................................................................................. 33 Report No.: FC190617E03B Page No. 2 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

Release Control Record Issue No. Description Date Issued FC190617E03B Original release. Aug. 30, 2019 Report No.: FC190617E03B Page No. 3 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

1 Certificate of Conformity Product: Wireless router Sample Status: ENGINEERING SAMPLE Applicant: Sharp Corporation Test Date: July 24 to Aug. 30, 2019 Standards: 47 CFR FCC Part 15, Subpart B, Class B ICES-003:2016 Issue 6, updated Apr. 2019, Class B ANSI C63.4:2014 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Aug. 30, 2019 Wendy Wu / Specialist Approved by : , Date: Aug. 30, 2019 Ken Lu / Manager Report No.: FC190617E03B Page No. 4 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

2 Summary of Test Results 47 CFR FCC Part 15, Subpart B / ICES-003:2016 Issue 6, updated Apr. 2019, Class B ANSI C63.4:2014 FCC ICES-003 Test Item Result/Remarks Verdict Clause Clause AC Power Line Conducted Minimum passing Class B margin 15.107 6.1 Pass Emissions is -3.22 dB at 0.52500 MHz Radiated Emissions up to 1 Minimum passing Class B margin 6.2.1 Pass GHz is -3.03 dB at 125.01 MHz 15.109 Radiated Emissions above 1 Minimum passing Class B margin 6.2.2 Pass GHz is -6.75 dB at 7234.75 MHz Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT: Expanded Uncertainty Measurement Frequency (k=2) (±) Conducted Emissions at mains ports 150kHz ~ 30MHz 1.8 dB Radiated Emissions up to 1 GHz 30MHz ~ 1GHz 4.0 dB 1GHz ~ 6GHz 4.7 dB Radiated Emissions above 1 GHz 6GHz ~ 18GHz 5.2 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: FC190617E03B Page No. 5 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

3 General Information. 3.1 Description of EUT Product Wireless router Sample Status ENGINEERING SAMPLE Operating Software NA Power Supply Rating Refer to Note Battery x 1 (Model: UBATIA301AFN2) Accessory Device Cradle with RJ45 x1 (Option, Model: J03W039.02) AC charge and USB Type-C cradle x 1 Data Cable Supplied NA Note: 1. The EUT must be supplied one power adapter or Battery as the following table: Adapter Model No. Spec. Input: 100-240V, 0.7A, 50/60Hz SB-AC19TCPD Output: 5V/7V/9V/12V, 3.0A/3.0A/3.0A/2.25A DC output cable (Unshielded, 1.6m) Battery Brand Model No. Spec. NA UBATIA301AFN2 3.85 Vdc, 4000mAh 3.2 Features of EUT The tests reported herein were performed according to the method specified by Sharp Corporation., for detailed feature description, please refer to the manufacturer's specifications or user's manual. Report No.: FC190617E03B Page No. 6 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

3.3 Operating Modes of EUT and Determination of Worst Case Operating Mode For Conducted Emissions and radiated emission test, the EUT has been pre-tested under following test modes, and test mode E, G, N were the worst case for final test. Test Condition Mode Radiated emission Power In Test Condition Wireless WCDMA/LTE LAN Arrangement Horizontal A DC 3.85 V EUT + Battery only 2.4G WCDMA B2 NA Placement Vertical B DC 3.85 V EUT + Battery only 2.4G WCDMA B2 NA Placement C DC 3.85 V EUT + Battery only 2.4G LTE B4 NA Side Lying Horizontal D AC 120V/60Hz EUT + Battery + Adapter 2.4G WCDMA B2 NA Placement EUT + Battery + Cradle + Horizontal E AC 120V/60Hz 2.4G WCDMA B2 1000 Mbps Adapter Placement Horizontal F DC 5 V EUT + Battery + USB 2.4G WCDMA B2 NA Placement WCDMA B5 EUT + Battery + Cradle + Horizontal G AC 120V/60Hz 2.4G (High, Olny 1000 Mbps Adapter Placement Receiver ) WCDMA B5 EUT + Battery + Cradle + Horizontal H AC 120V/60Hz 2.4G (Middle, Olny 1000 Mbps Adapter Placement Receiver ) EUT + Battery + Cradle + WCDMA B5 Horizontal I AC 120V/60Hz 2.4G 1000 Mbps Adapter (Low, Olny Receiver) Placement EUT + Battery + Cradle + LTE B12 Horizontal J AC 120V/60Hz 2.4G 1000 Mbps Adapter (High, Olny Receiver ) Placement LTE B12 EUT + Battery + Cradle + Horizontal K AC 120V/60Hz 2.4G (Middle, Olny 1000 Mbps Adapter Placement Receiver ) EUT + Battery + Cradle + LTE B12 Horizontal L AC 120V/60Hz 2.4G 1000 Mbps Adapter (Low, Olny Receiver) Placement Test Condition Mode Conducted Emissions Power In Test Condition Wireless WCDMA/LTE LAN Arrangement Horizontal M AC 120V/60Hz EUT + Battery + Adapter 2.4G WCDMA B2 NA Placement EUT + Battery + Cradle + Horizontal N AC 120V/60Hz 2.4G WCDMA B2 1000 Mbps Adapter Placement Horizontal O DC 5V EUT + Battery + USB 2.4G WCDMA B2 NA Placement NOTE: 1. The test configurations are defined by the applicant requirement. 2. For cellular band between 30 MHz ~ 960 MHz (Including WCDMA Band 5, LTE Band 5, LTE Band 12, LTE Band 17), we chose WCDMA Band 5 and LTE Band 12 to test in Low / Middle / High channels to cover all these bands in this report. Report No.: FC190617E03B Page No. 7 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

Test mode is presented in the report as below. Test Condition Mode Power In Test Condition Wireless WCDMA/4G LAN Arrangement EUT + Battery + Cradle + Horizontal 1 AC 120V/60Hz 2.4G WCDMA B 2 1000 Mbps Adapter Placement WCDMA B5 EUT + Battery + Cradle + Horizontal 2 AC 120V/60Hz 2.4G (High, Olny 1000 Mbps Adapter Placement Receiver ) 3.4 Test Program Used and Operation Descriptions 1. Turn on the power of all equipment. 2. Support unit C (Laptop) runs “TfGen.exe” program to communicate with EUT. 3. Support unit B (Laptop) runs “Ping.exe” program to communicate with EUT via WiFi 2.4G. 4. The EUT links support unit D (U.R.C.T) via 3G. 3.5 Primary Clock Frequencies of Internal Source The EUT is provided by Sharp Corporation., for detailed internal source, please refer to the manufacturer's specifications. Report No.: FC190617E03B Page No. 8 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

4 Configuration and Connections with EUT 4.1 Connection Diagram of EUT and Peripheral Devices WiFi 2.4G + 3G (A)SIM Card EUT (Router) USB Type C (1) USB Type C Adapter EUT (Cradle) LAN (2) Remote Site WiFi 2.4G 3G (B)Laptop (C)Laptop (D)U.R.C.T Report No.: FC190617E03B Page No. 9 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

4.2 Configuration of Peripheral Devices and Cable Connections ID Product Brand Model No. Serial No. FCC ID Remarks A. SIM Card NA NA NA NA Provided by Lab B. Laptop DELL P70F 1KY07L2 FCC DoC Provided by Lab C. Laptop DELL PP27L 7YLB32S FCC DoC Provided by Lab U.R.C.T D. (Universal Radio R&S CMU200 121040 NA Provided by Lab Communication Tester) Note: 1. All power cords of the above support units are non-shielded (1.8m). Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) DC Power to USB Type 1. 1 1.6 No 0 Supplied by client C Cable 2. Cat.5e Cable 1 10 No 0 Provided by Lab Report No.: FC190617E03B Page No. 10 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

5 Conducted Emissions at Mains Ports 5.1 Limits Class A (dBuV) Class B (dBuV) Frequency (MHz) Quasi-peak Average Quasi-peak Average 0.15 - 0.5 79 66 66 - 56 56 - 46 0.50 - 5.0 73 60 56 46 5.0 - 30.0 73 60 60 50 Notes: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases linearly with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 5.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver ESCS 30 100375 May 15, 2019 May 14, 2020 R&S Line-Impedance Stabilization Network NSLK-8127 8127-522 Sep. 03, 2018 Sep. 02, 2019 (for EUT) SCHWARZBECK Line-Impedance Stabilization Network ENV 216 100072 June 12, 2019 June 11, 2020 (for Peripheral) R&S RF Cable 5D-FB COACAB-002 Feb. 22, 2019 Feb. 21, 2020 10 dB PAD STI02-2200-10 004 Mar. 14, 2019 Mar. 13, 2020 EMEC 50 ohms Terminator N/A EMC-03 Sep. 25, 2018 Sep. 24, 2019 50 ohms Terminator N/A EMC-02 Sep. 12, 2018 Sep. 11, 2019 Software BVADT_Cond_ NA NA NA BVADT V7.3.7.4 Note: 1. The calibration interval of the above test instruments are 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Conducted Room C 3 The VCCI Con C Registration No. is C-13611. 4 Tested Date: July 24 to Aug. 30, 2019 Report No.: FC190617E03B Page No. 11 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

5.3 Test Arrangement a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The test results of conducted emissions at mains ports are recorded of six worst margins for quasi-peak (mandatory) [and average (if necessary)] values against the limits at frequencies of interest unless the margin is 20 dB or greater. Note: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP) and average detection (AV) at frequency 0.15MHz-30MHz. For the actual test configuration, please refer to the related Item – Photographs of the Test Configuration. 5.4 Supplementary Information There is not any deviation from the test standards for the test method. Report No.: FC190617E03B Page No. 12 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

5.5 Test Results (Mode 1) Detector Function Quasi-Peak (QP) / Frequency Range 150kHz ~ 30MHz & Resolution Average (AV), 9kHz Bandwidth Environmental Input Power 120Vac, 60Hz 25℃, 65%RH Conditions Tested by Leon Wu Test Mode Mode 1 Phase Of Power : Line (L) Frequency Correction Reading Value Emission Level Limit Margin No Factor (dBuV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.24375 10.02 23.83 15.87 33.85 25.89 61.97 51.97 -28.12 -26.08 2 0.53281 10.05 32.94 31.39 42.99 41.44 56.00 46.00 -13.01 -4.56 3 0.82188 10.08 21.27 16.64 31.35 26.72 56.00 46.00 -24.65 -19.28 4 1.87500 10.13 18.92 14.53 29.05 24.66 56.00 46.00 -26.95 -21.34 5 2.87500 10.20 18.20 13.14 28.40 23.34 56.00 46.00 -27.60 -22.66 6 6.58984 10.35 14.64 5.80 24.99 16.15 60.00 50.00 -35.01 -33.85 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: FC190617E03B Page No. 13 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

Detector Function Quasi-Peak (QP) / Frequency Range 150kHz ~ 30MHz & Resolution Average (AV), 9kHz Bandwidth Environmental Input Power 120Vac, 60Hz 25℃, 65%RH Conditions Tested by Leon Wu Test Mode Mode 1 Phase Of Power : Neutral (N) Frequency Correction Reading Value Emission Level Limit Margin No Factor (dBuV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.52500 10.05 35.31 32.73 45.36 42.78 56.00 46.00 -10.64 -3.22 2 0.60772 10.05 23.41 20.90 33.46 30.95 56.00 46.00 -22.54 -15.05 3 0.91563 10.07 17.43 10.26 27.50 20.33 56.00 46.00 -28.50 -25.67 4 1.76953 10.11 18.20 13.62 28.31 23.73 56.00 46.00 -27.69 -22.27 5 8.59375 10.34 15.02 7.72 25.36 18.06 60.00 50.00 -34.64 -31.94 6 21.59766 10.67 10.29 1.61 20.96 12.28 60.00 50.00 -39.04 -37.72 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: FC190617E03B Page No. 14 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

5.6 Test Results (Mode 2) Detector Function Quasi-Peak (QP) / Frequency Range 150kHz ~ 30MHz & Resolution Average (AV), 9kHz Bandwidth Environmental Input Power 120Vac, 60Hz 25℃, 65%RH Conditions Tested by Bear Lee Test Mode Mode 2 Phase Of Power : Line (L) Frequency Correction Reading Value Emission Level Limit Margin No Factor (dBuV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 9.68 27.52 12.24 37.20 21.92 66.00 56.00 -28.80 -34.08 2 0.24375 9.71 23.32 10.44 33.03 20.15 61.97 51.97 -28.94 -31.82 3 0.44297 9.74 21.10 14.98 30.84 24.72 57.01 47.01 -26.17 -22.29 4 1.77344 9.80 17.40 11.14 27.20 20.94 56.00 46.00 -28.80 -25.06 5 3.60938 9.94 21.66 14.76 31.60 24.70 56.00 46.00 -24.40 -21.30 6 5.20703 10.01 22.66 14.98 32.67 24.99 60.00 50.00 -27.33 -25.01 7 9.44141 10.15 20.78 10.98 30.93 21.13 60.00 50.00 -29.07 -28.87 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: FC190617E03B Page No. 15 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

Detector Function Quasi-Peak (QP) / Frequency Range 150kHz ~ 30MHz & Resolution Average (AV), 9kHz Bandwidth Environmental Input Power 120Vac, 60Hz 25℃, 65%RH Conditions Tested by Bear Lee Test Mode Mode 2 Phase Of Power : Neutral (N) Frequency Correction Reading Value Emission Level Limit Margin No Factor (dBuV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15391 9.73 27.10 13.26 36.83 22.99 65.79 55.79 -28.96 -32.80 2 0.38047 9.78 24.22 18.26 34.00 28.04 58.27 48.27 -24.27 -20.23 3 0.44688 9.78 25.34 20.04 35.12 29.82 56.93 46.93 -21.81 -17.11 4 1.51563 9.87 28.36 21.76 38.23 31.63 56.00 46.00 -17.77 -14.37 5 3.42969 9.97 21.40 17.04 31.37 27.01 56.00 46.00 -24.63 -18.99 6 10.92188 10.26 22.06 8.16 32.32 18.42 60.00 50.00 -27.68 -31.58 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: FC190617E03B Page No. 16 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

6 Radiated Emissions up to 1 GHz 6.1 Limits Emissions radiated outside of the specified bands, shall be according to the general radiated limits as following: Radiated Emissions Limits at 10 meters (dBμV/m) Frequencies FCC 15B / ICES-003, FCC 15B / ICES-003, CISPR 22, Class A CISPR 22, Class B (MHz) Class A Class B 30-88 39 29.5 88-216 43.5 33.1 40 30 216-230 46.4 35.6 230-960 47 37 960-1000 49.5 43.5 Radiated Emissions Limits at 3 meters (dBμV/m) Frequencies FCC 15B / ICES-003, FCC 15B / ICES-003, CISPR 22, Class A CISPR 22, Class B (MHz) Class A Class B 30-88 49.5 40 88-216 54 43.5 50.5 40.5 216-230 56.9 46 230-960 57.5 47.5 960-1000 60 54 Notes: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. QP detector shall be applied if not specified. Report No.: FC190617E03B Page No. 17 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

6.2 Test Instruments For Mode 1: DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY50010125 Apr. 11, 2019 Apr. 10, 2020 Agilent Test Receiver N9038A MY50010132 July 12, 2019 July 11, 2020 Agilent Pre-Amplifier 310N 352925 Aug. 27, 2018 Aug. 26, 2019 Sonoma 310N 352926 Aug. 27, 2018 Aug. 26, 2019 Trilog Broadband VULB 9168 9168-359 Nov. 22, 2018 Nov. 21, 2019 Antenna VULB 9168 9168-358 Nov. 21, 2018 Nov. 20, 2019 SCHWARZBECK Fixed attenuator UNAT-5+ CHF-001 Sep. 05, 2018 Sep. 04, 2019 Mini-Circuits UNAT-5+ CHF-002 Sep. 05, 2018 Sep. 04, 2019 CHFCAB-001-1 CHFCAB-001-3 Sep. 17, 2018 Sep. 16, 2019 CHFCAB-001-4 RF Cable 8D-FB CHFCAB-002-1 CHFCAB-002-3 Sep. 17, 2018 Sep. 16, 2019 CHFCAB-002-4 Software ADT_Radiated_V NA NA NA BVADT 8.7.08 Antenna Tower & Turn Table NA NA NA NA CT Note: 1. The calibration interval of the above test instruments are 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Chamber F room 3. The VCCI Site Registration No. is R-13252. 4. Tested Date: July 30, 2019 Report No.: FC190617E03B Page No. 18 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

For Mode 2: DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY50010125 Apr. 11, 2019 Apr. 10, 2020 Agilent Test Receiver N9038A MY50010132 July 12, 2019 July 11, 2020 Agilent Pre-Amplifier 310N 352925 Aug. 26, 2019 Aug. 25, 2020 Sonoma 310N 352926 Aug. 26, 2019 Aug. 25, 2020 Trilog Broadband VULB 9168 9168-359 Nov. 22, 2018 Nov. 21, 2019 Antenna VULB 9168 9168-358 Nov. 21, 2018 Nov. 20, 2019 SCHWARZBECK Fixed attenuator UNAT-5+ CHF-001 Sep. 05, 2018 Sep. 04, 2019 Mini-Circuits UNAT-5+ CHF-002 Sep. 05, 2018 Sep. 04, 2019 CHFCAB-001-1 CHFCAB-001-3 Sep. 17, 2018 Sep. 16, 2019 CHFCAB-001-4 RF Cable 8D-FB CHFCAB-002-1 CHFCAB-002-3 Sep. 17, 2018 Sep. 16, 2019 CHFCAB-002-4 Software ADT_Radiated_V NA NA NA BVADT 8.7.08 Antenna Tower & Turn Table NA NA NA NA CT Note: 1. The calibration interval of the above test instruments are 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Chamber F room 3. The VCCI Site Registration No. is R-13252. 4. Tested Date: Aug. 30, 2019 Report No.: FC190617E03B Page No. 19 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

6.3 Test Arrangement a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at an accredited test facility. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 10 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is up to 1 GHz. Note: The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for quasi-peak detection (QP) at frequency up to 1GHz. For the actual test configuration, please refer to the related Item – Photographs of the Test Configuration. 6.4 Supplementary Information There is not any deviation from the test standards for the test method. Report No.: FC190617E03B Page No. 20 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

6.5 Test Results (Mode 1) Detector Function & Frequency Range 30MHz ~ 1GHz Resolution Quasi-Peak (QP), 120kHz Bandwidth Environmental Input Power 120Vac, 60Hz 23℃, 62%RH Conditions Tested by Darren Lin Test Mode Mode 1 Antenna Polarity & Test Distance : Horizontal at 10 m Emission Antenna Table Raw Correction Frequency Limit Margin No Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 57.89 18.43 QP 30.00 -11.57 3.00 H 34 31.85 -13.42 2 173.44 20.72 QP 30.00 -9.28 3.00 H 292 33.82 -13.10 3 250.00 24.06 QP 37.00 -12.94 4.00 H 87 37.09 -13.03 4 671.97 25.34 QP 37.00 -11.66 4.00 H 296 27.81 -2.47 5 938.21 29.22 QP 37.00 -7.78 3.00 H 123 26.17 3.05 6 998.69 29.25 QP 37.00 -7.75 3.68 H 294 25.18 4.07 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) – Pre-Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value Report No.: FC190617E03B Page No. 21 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

Detector Function & Frequency Range 30MHz ~ 1GHz Resolution Quasi-Peak (QP), 120kHz Bandwidth Environmental Input Power 120Vac, 60Hz 23℃, 62%RH Conditions Tested by Darren Lin Test Mode Mode 1 Antenna Polarity & Test Distance : Vertical at 10 m Emission Antenna Table Raw Correction Frequency Limit Margin No Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 34.08 24.33 QP 30.00 -5.67 1.00 V 64 38.32 -13.99 2 125.01 26.97 QP 30.00 -3.03 1.32 V 85 40.63 -13.66 3 147.37 22.66 QP 30.00 -7.34 1.00 V 103 34.76 -12.10 4 179.23 25.53 QP 30.00 -4.47 1.00 V 254 38.92 -13.39 5 194.03 24.31 QP 30.00 -5.69 1.00 V 251 38.91 -14.60 6 311.01 25.87 QP 37.00 -11.13 1.00 V 267 36.18 -10.31 7 593.98 28.19 QP 37.00 -8.81 4.00 V 8 31.32 -3.13 8 984.26 29.16 QP 37.00 -7.84 2.00 V 8 25.02 4.14 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) – Pre-Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value Report No.: FC190617E03B Page No. 22 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

6.6 Test Results (Mode 2) Detector Function & Frequency Range 30MHz ~ 1GHz Resolution Quasi-Peak (QP), 120kHz Bandwidth Environmental Input Power 120Vac, 60Hz 25℃, 62%RH Conditions Tested by Pon Tsai Test Mode Mode 2 Antenna Polarity & Test Distance : Horizontal at 10 m Emission Antenna Table Raw Correction Frequency Limit Margin No Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 53.33 18.14 QP 30.00 -11.86 4.00 H 166 31.31 -13.17 2 172.40 18.73 QP 30.00 -11.27 3.00 H 326 31.77 -13.04 3 189.08 19.89 QP 30.00 -10.11 4.00 H 134 34.41 -14.52 4 637.97 25.71 QP 37.00 -11.29 2.00 H 32 28.51 -2.80 5 784.13 27.32 QP 37.00 -9.68 1.00 H 46 26.97 0.35 6 909.35 28.92 QP 37.00 -8.08 3.88 H 310 26.33 2.59 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) – Pre-Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value Report No.: FC190617E03B Page No. 23 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

Detector Function & Frequency Range 30MHz ~ 1GHz Resolution Quasi-Peak (QP), 120kHz Bandwidth Environmental Input Power 120Vac, 60Hz 25℃, 62%RH Conditions Tested by Pon Tsai Test Mode Mode 2 Antenna Polarity & Test Distance : Vertical at 10 m Emission Antenna Table Raw Correction Frequency Limit Margin No Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 57.28 24.86 QP 30.00 -5.14 1.00 V 333 38.19 -13.33 2 69.92 26.72 QP 30.00 -3.28 2.00 V 237 41.75 -15.03 3 78.74 26.00 QP 30.00 -4.00 1.00 V 307 43.15 -17.15 4 145.31 22.39 QP 30.00 -7.61 1.00 V 64 34.69 -12.30 5 163.11 25.46 QP 30.00 -4.54 2.00 V 80 37.70 -12.24 6 197.32 24.22 QP 30.00 -5.78 1.00 V 148 38.66 -14.44 7 220.46 26.89 QP 30.00 -3.11 1.06 V 99 41.14 -14.25 8 250.04 26.72 QP 37.00 -10.28 1.00 V 268 39.35 -12.63 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) – Pre-Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value Report No.: FC190617E03B Page No. 24 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

7 Radiated Emissions above 1 GHz 7.1 Limits Emissions radiated outside of the specified bands, shall be according to the general radiated limits as following: Radiated Emissions Limits at 10 meters (dBμV/m) Frequencies FCC 15B / ICES-003, FCC 15B / ICES-003, CISPR 22, Class A CISPR 22, Class B (MHz) Class A Class B 1000-3000 Avg: 49.5 Avg: 43.5 Not defined Not defined Above 3000 Peak: 69.5 Peak: 63.5 Not defined Not defined Radiated Emissions Limits at 3 meters (dBμV/m) Frequencies FCC 15B / ICES-003, FCC 15B / ICES-003, CISPR 22, Class A CISPR 22, Class B (MHz) Class A Class B Avg: 56 Avg: 50 1000-3000 Avg: 60 Avg: 54 Peak: 76 Peak: 70 Peak: 80 Peak: 74 Avg: 60 Avg: 54 Above 3000 Peak: 80 Peak: 74 Notes: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Frequency Range (For unintentional radiators) Highest frequency generated or used in the device or Upper frequency of measurement range (MHz) on which the device operates or tunes (MHz) Below 1.705 30 1.705-108 1000 108-500 2000 500-1000 5000 5th harmonic of the highest frequency or 40GHz, Above 1000 whichever is lower Report No.: FC190617E03B Page No. 25 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

7.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY50010125 Apr. 11, 2019 Apr. 10, 2020 Agilent Pre-Amplifier 8449B 3008A01975 Feb. 21, 2019 Feb. 20, 2020 Agilent Horn Antenna BBHA 9120D D123 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK EMC104-SM-SM RF Coaxial Cable 170209 Mar. 05, 2019 Mar. 04, 2020 -11000 EMC104-SM-SM RF Coaxial Cable 170207 Mar. 05, 2019 Mar. 04, 2020 -6000 EMC104-SM-SM RF Coaxial Cable 170206 Mar. 05, 2019 Mar. 04, 2020 -2500 Software ADT_Radiated_ NA NA NA BVADT V8.7.08 Antenna Tower & Turn Table NA NA NA NA CT Fix tool for Boresight BAF-01 5 NA NA antenna tower Note: 1. The calibration interval of the above test instruments are 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Chamber F room 3. Tested Date: July 29 to Aug. 29, 2019 Report No.: FC190617E03B Page No. 26 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

7.3 Test Arrangement a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at an accredited chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna can be varied from one meter to four meters, the height of adjustment depends on the EUT height and the antenna 3dB beamwidth both, to detect the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The spectrum analyzer system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. Note: The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and video bandwidth is 3MHz for Peak detection (PK) at frequency above 1GHz. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz for Average detection (AV) at frequency above 1GHz. Ant. Tower 1 - 4m Variable EUT& 3m Support Units Turn Table Absorber 80cm Ground Plane Test Receiver The test arrangement is in accordance with ANSI 63.4:2014. For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 7.4 Supplementary Information There is not any deviation from the test standards for the test method. Report No.: FC190617E03B Page No. 27 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

7.5 Test Results (Mode 1) Detector Function & Peak (PK) / Frequency Range 1GHz ~ 18GHz Resolution Average (AV), 1MHz Bandwidth Environmental Input Power 120Vac, 60Hz 23℃, 70%RH Conditions Tested by Darren Lin Test Mode Mode 1 Antenna Polarity & Test Distance : Horizontal at 3 m Emission Antenna Table Raw Correction Frequency Limit Margin No Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 1756.88 52.03 PK 74.00 -21.97 1.00 H 140 55.10 -3.07 2 1756.88 33.71 AV 54.00 -20.29 1.00 H 87 36.78 -3.07 3 2745.90 44.91 PK 74.00 -29.09 1.00 H 105 43.29 1.62 4 2745.90 32.64 AV 54.00 -21.36 1.00 H 81 31.02 1.62 5 3360.45 45.96 PK 74.00 -28.04 1.00 H 360 42.34 3.62 6 3360.45 32.95 AV 54.00 -21.05 1.00 H 337 29.33 3.62 7 5059.60 51.74 PK 74.00 -22.26 1.00 H 151 41.98 9.76 8 5059.60 39.04 AV 54.00 -14.96 1.00 H 250 29.28 9.76 9 9114.10 58.11 PK 74.00 -15.89 1.00 H 168 43.15 14.96 10 9114.10 45.40 AV 54.00 -8.60 1.00 H 117 30.44 14.96 11 10083.95 59.50 PK 74.00 -14.50 1.00 H 117 43.75 15.75 12 10083.95 45.80 AV 54.00 -8.20 1.00 H 121 30.05 15.75 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) – Pre-Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value Report No.: FC190617E03B Page No. 28 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

Detector Function & Peak (PK) / Frequency Range 1GHz ~ 18GHz Resolution Average (AV), 1MHz Bandwidth Environmental Input Power 120Vac, 60Hz 23℃, 70%RH Conditions Tested by Darren Lin Test Mode Mode 1 Antenna Polarity & Test Distance : Vertical at 3 m Emission Antenna Table Raw Correction Frequency Limit Margin No Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 1815.10 43.63 PK 74.00 -30.37 1.00 V 313 46.51 -2.88 2 1815.10 32.44 AV 54.00 -21.56 1.00 V 360 35.32 -2.88 3 2521.50 47.31 PK 74.00 -26.69 1.00 V 348 46.57 0.74 4 2521.50 31.54 AV 54.00 -22.46 1.00 V 360 30.80 0.74 5 5581.50 52.05 PK 74.00 -21.95 1.00 V 344 40.02 12.03 6 5581.50 40.09 AV 54.00 -13.91 1.00 V 0 28.06 12.03 7 7023.95 58.62 PK 74.00 -15.38 1.00 V 32 42.06 16.56 8 7023.95 45.68 AV 54.00 -8.32 1.00 V 360 29.12 16.56 9 9199.10 58.49 PK 74.00 -15.51 1.00 V 175 43.41 15.08 10 9199.10 45.56 AV 54.00 -8.44 1.00 V 264 30.48 15.08 11 11198.30 59.81 PK 74.00 -14.19 1.00 V 297 42.23 17.58 12 11198.30 46.69 AV 54.00 -7.31 1.00 V 283 29.11 17.58 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) – Pre-Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value Report No.: FC190617E03B Page No. 29 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

7.6 Test Results (Mode 2) Detector Function & Peak (PK) / Frequency Range 1GHz ~ 18GHz Resolution Average (AV), 1MHz Bandwidth Environmental Input Power 120Vac, 60Hz 25℃, 70%RH Conditions Tested by Jason Huang Test Mode Mode 2 Antenna Polarity & Test Distance : Horizontal at 3 m Emission Antenna Table Raw Correction Frequency Limit Margin No Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 3208.30 45.12 PK 74.00 -28.88 1.00 H 85 42.86 2.26 2 3208.30 35.33 AV 54.00 -18.67 1.00 H 83 33.07 2.26 3 4095.70 49.03 PK 74.00 -24.97 1.00 H 27 42.89 6.14 4 4095.70 35.56 AV 54.00 -18.44 1.00 H 27 29.42 6.14 5 4824.15 53.26 PK 74.00 -20.74 1.00 H 251 44.64 8.62 6 4824.15 39.58 AV 54.00 -14.42 1.00 H 257 30.96 8.62 7 5782.95 53.39 PK 74.00 -20.61 1.00 H 222 42.00 11.39 8 5782.95 40.12 AV 54.00 -13.88 1.00 H 253 28.73 11.39 9 6966.15 58.02 PK 74.00 -15.98 1.00 H 286 42.01 16.01 10 6966.15 44.95 AV 54.00 -9.05 1.00 H 258 28.94 16.01 11 9070.75 57.20 PK 74.00 -16.80 1.00 H 158 43.14 14.06 12 9070.75 44.44 AV 54.00 -9.56 1.00 H 132 30.38 14.06 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) – Pre-Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value Report No.: FC190617E03B Page No. 30 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

Detector Function & Peak (PK) / Frequency Range 1GHz ~ 18GHz Resolution Average (AV), 1MHz Bandwidth Environmental Input Power 120Vac, 60Hz 25℃, 70%RH Conditions Tested by Jason Huang Test Mode Mode 2 Antenna Polarity & Test Distance : Vertical at 3 m Emission Antenna Table Raw Correction Frequency Limit Margin No Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 1810.90 40.85 PK 74.00 -33.15 1.00 V 25 44.27 -3.42 2 1810.90 27.98 AV 54.00 -26.02 1.00 V 28 31.40 -3.42 3 4086.35 47.79 PK 74.00 -26.21 1.00 V 229 41.65 6.14 4 4086.35 37.52 AV 54.00 -16.48 1.00 V 251 31.38 6.14 5 4824.15 56.39 PK 74.00 -17.61 1.00 V 167 47.77 8.62 6 4824.15 40.03 AV 54.00 -13.97 1.00 V 185 31.41 8.62 7 6657.60 56.83 PK 74.00 -17.17 1.00 V 150 41.85 14.98 8 6657.60 44.00 AV 54.00 -10.00 1.00 V 135 29.02 14.98 9 7234.75 67.43 PK 74.00 -6.57 1.00 V 334 52.07 15.36 10 7234.75 44.74 AV 54.00 -9.26 1.00 V 337 29.38 15.36 11 10937.35 59.62 PK 74.00 -14.38 1.00 V 207 43.43 16.19 12 10937.35 45.62 AV 54.00 -8.38 1.00 V 210 29.43 16.19 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) – Pre-Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value Report No.: FC190617E03B Page No. 31 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

8 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: FC190617E03B Page No. 32 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05

Appendix – Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Lin Kou EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: FC190617E03B Page No. 33 / 33 Report Format Version: 6.1.2 Reference No.: 190709E05


Document Created: 2019-09-03 22:25:56
Document Modified: 2019-09-03 22:25:56
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC