User Manual Draft

FCC ID: APYHRO00259

Users Manual

Download: PDF
FCCID_3818899

Introduction Thank you for purchasing “ SH-03K”. Be sure to read this manual before and during use to ensure proper operation. z The screens and illustrations in this manual are shown as examples. The actual screens and illustrations may differ. z Note that “SH-03K” is referred to as “handset” in this manual. z This manual refers to microSD Card, microSDHC Card or microSDXC Card as “microSD Card” or “microSD”. z Reproduction of this manual in part or in whole without prior permission is prohibited. z The contents of this manual are subject to change without prior notice.

Basic package モSH-03K (includes warranty) Quick Start Guide Notes on usage (in Japanese only) (in Japanese only) z Optional parts (sold separately) compatible with the handset can also be checked and purchased on docomo online shop. (https://www.mydocomo.com/onlineshop/options/index.html) (in Japanese only) (This drawing is not final) 1 Contents/Precautions

*1 Serious bodily injury: This refers to loss of eyesight, bodily Precautions (ALWAYS FOLLOW injury, burns (high- and low-temperature), electric shock, THESE DIRECTIONS) broken bones, injuries with residual aftereffects from poisoning, etc., and injuries requiring hospital admission for „ Before use, read these “Precautions” carefully and use your treatment or long-term hospital attendance as an outpatient. handset properly. *2 Minor injury: This refers to bodily injury, burns (high- and „ These precautions contain information intended to prevent low-temperature), electric shock, etc. that do not require bodily injury to the user and to surrounding people, as well hospital admission for treatment or long-term hospital as damage to property, and must be observed at all times. attendance as an outpatient. „ The following symbols indicate the different degrees of *3 Property damage: This refers to extended damage to injury or damage that may occur if information provided is buildings, furniture, livestock, pets, etc. not observed and the handset is used improperly. „ The following symbols indicate specific directions. This symbol indicates that “death or serious bodily Indicates not to Indicates a Danger injury (*1) may directly and immediately result from prohibited action. handle the device with wet hands. improper use”. Indicates that This symbol indicates that instructions Indicates not to “death or serious bodily specified are disassemble the Warning injury (*1) may result from device. compulsory improper use”. (must be followed). This symbol indicates that Indicates not to Indicates that the “minor injury (*2) and/or Caution property damage (*3) may use the device near water or get power cord must be unplugged from result from improper use”. it wet. the outlet. 7 Contents/Precautions

“Precautions” is explained in the following sections. Do not sprinkle sand, soil or dirt on the equipment z Handling the handset, adapters, nano UIM card and TV or put the equipment directly on it. Also, do not antenna cable (general) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.8 touch the equipment when sand etc. is adhering to z Handling the handset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.10 your hand. z Handling adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.14 May cause fires, burns, bodily injury, electric shock, etc. z Handling nano UIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.16 Refer to the following for details on waterproofness/ z Handling near electronic medical equipment. . . . . . . . . . . . . P.16 dustproofness. z Material list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.17 ☞ P.26 “Waterproof/Dustproof” z Handling the sample (SIM eject tool). . . . . . . . . . . . . . . . . . . P.18 Do not charge the equipment while it is wet with liquids such as water (drinking water, sweat, Handling the handset, adapters, nano UIM seawater, pet urine, etc.). card and TV antenna cable (general) May cause fires, burns, bodily injury, electric shock, etc. Refer to the following for details on waterproofness. Danger ☞ P.26 “Waterproof/Dustproof” Do not press the equipment strongly or broken it. Do not use, store or leave the equipment in Especially when you put and carry it in the pocket, locations subject to high temperatures or do not let it hit or caught in the object . May cause fires, burns, bodily injury, etc. because of accumulation of heat (near a fire or heating unit, in catching fire, exploding, overheating or leaking of the a kotatsu or bedding, under direct sunlight, inside internal battery. a vehicle on a hot day, etc.). ※Take particular care with the followings May cause fires, burns, bodily injury, electric shock, etc. z Sitting or squatting down while you are putting the Do not place the equipment inside cooking equipment in your pocket of trousers or skirt appliances such as microwave ovens and induction z Letting the equipment caught in the door or vehicular cookers or high pressure vessels such as pressure door while you are putting the equipment in your pocket cookers, or near them. of outerwear May cause fires, burns, bodily injury, electric shock, etc. z Stepping on the equipment while it is placing on the soft object such as the sofa or bedding, floor 8 Contents/Precautions

Do not attempt to disassemble or modify the Do not allow conductive materials (such as metal equipment. objects and pencil lead) to come into contact with May cause fires, burns, bodily injury, electric shock, etc. the charger terminal or external connection jack or Do not get the equipment wet with liquids such as dust to get inside it. water (drinking water, sweat, seawater, pet urine, May cause fires, burns, bodily injury, electric shock, etc. etc.). Do not cover or wrap the equipment with bedding May cause fires, burns, bodily injury, electric shock, etc. etc. when using or charging. Refer to the following for details on waterproofness. May cause fires, burns, etc. ☞ P.26 “Waterproof/Dustproof” If charging is not completed after the specified Do not allow liquids such as water (drinking water, charging time, stop charging. sweat, seawater, pet urine, etc.) to get inside the May cause fires, burns, bodily injury, etc. because of charger terminal or external connection jack. overcharging. May cause fires, burns, bodily injury, electric shock, etc. Be sure to turn off the handset and not to charge Refer to the following for details on waterproofness. ☞ the battery in locations where flammable gas may P.26 “Waterproof/Dustproof” be generated such as gas stations and where dust Use only optional parts specified by ●●●. is generated. May cause fires, burns, bodily injury, electric shock, etc. May cause explosions, fires etc. if using the equipment in location where flammable gas etc. is generated. To use Osaifu-Keitai in locations such as gas stations, be sure to turn off the power in advance (If NFC/Osaifu-Keitai Warning lock is set, disable the lock before turning off the power). Do not subject the equipment to strong force, impacts or vibration such as letting it fall, stepping on it or throwing it. May cause fires, burns, bodily injury, electric shock, etc. 9 Contents/Precautions

If any trouble such as an unusual odor, unusual Do not place the equipment where the young noise, smoking, overheating, discoloration or children can reach it. deformation is found during use, charge or storage, A young child may swallow the equipment, or suffer bodily follow the instructions below. injury, electric shock, etc. z Unplug the power plug from the outlet or accessory Be careful when using the handset continuously socket. for a long time or charging because it may become z Turn off the handset. warm. Also, be careful not to touch it May cause fires, burns, bodily injury, electric shock, etc. if unintentionally for a long time when you fall asleep you do not follow the instructions above. etc. The handset or adapter may become warm when using an Caution app, a call, data communication, watching TV or video, etc. for a long time or charging. Directly touching a warmed part for a long time may cause Do not use a damaged equipment. redness, itching, rashes, low-temperature burns, etc. on May cause fires, burns, bodily injury, etc. your skin depending on your constitution or health condition. Do not leave the equipment on unstable surfaces, such as on a wobbly table or sloped surface. Be Handling the handset very careful while the vibrator is set. May fall and cause injury etc. Do not use or store the equipment in locations that Danger are subject to humidity, dust or high temperatures. Do not throw the handset into a fire or heat it. May cause fires, burns, electric shock, etc. May cause fires, burns, bodily injury, etc. because of Refer to the following for details on waterproofness/ catching fire, exploding, overheating or leaking of the dustproofness. internal battery. ☞ P.26 “Waterproof/Dustproof” If being used by a child, have a guardian teach him/ her the proper handling procedures and do not have him/her use it improperly. May cause bodily injury etc. 10 Contents/Precautions

Do not apply excessive force on the handset such Do not allow water or other liquids (drinking water, as puncturing it with a nail (sharp object), hitting it sweat, seawater, pet urine, etc.), metal, flammable with a hammer (hard object) or stepping on it. material or other foreign object to enter the slot of May cause fires, burns, bodily injury, etc. because of the nano UIM Card and microSD Card tray on the catching fire, exploding, overheating or leaking of the handset. internal battery. Also, do not insert the nano UIM card or microSD If the substance etc. inside the handset comes into Card in the wrong place or wrong side. contact with your eyes or mouth, immediately rinse May cause fires, burns, bodily injury, electric shock, etc. the contacted area with clean water. Then seek Do not expose the camera lens to direct sunlight prompt medical treatment. etc. for an extended period. May result in loss of eyesight, sick, etc. because of the May cause fires, burns, bodily injury etc. because of the substance etc. inside the handset. light-collecting mechanism of the lens. Turn off the handset or set it to Airplane mode Warning before going aboard an airplane. Since using the handset on airplanes is restricted, follow Do not point the illuminated light directly at the instructions given by the respective airlines. May interfere with the operation of electronic devices someone's eyes. Especially when you use it for installed on the airplane. young children, keep sufficient distance from them. If you commit a prohibited act while using the handset on Do not use Mobile light near people's faces. Eyesight may an airplane, you may be punished by law. be temporarily affected leading to accidents etc. Follow the instructions given by the respective Do not illuminate or emit the mobile light at anyone medical facility regarding the use of the handset in driving a car or other vehicles. a hospital. May prevent a driver from driving safely and cause a traffic Turn off the handset in areas where the use of mobile accident etc. phones is prohibited. Do not watch the screen which is flashing May interfere with the operation of electronic devices and repeatedly for a long time. electronic medical equipment. May cause spasm or loss of consciousness. 11 Contents/Precautions

Keep the handset away from the ears during a call Turn off the handset near high-precision electronic in which hands-free is set, while the ringtone is devices or devices that use weak electronic ringing loudly, during stand-by, etc. signals. When you attach the earphone/microphone etc. to May interfere with the operation of electronic devices. the handset to play games, video/music, etc., do ※Take particular care with the following devices not make the volume too loud. Hearing aids, implanted cardiac pacemakers, implanted During a call in which hands-free is set, loud sounds are cardioverter-defibrillators, other electronic medical being emitted from the handset. equipment, other equipment controlled by electronic signals, Even during stand-by, the ringtone or alarm sound may etc. If you use an implanted cardiac pacemaker, implanted activate suddenly. cardioverter-defibrillator or other electronic medical Hearing loud sounds for a long time may damage your equipment, contact the respective manufacturer or dealer to hearing such as deafness. check whether the operation of the equipment is affected by Also, excessively high volume prevent you from hearing signals. ambient sounds and cause an accident. If the display part or camera lens is damaged, be If you have a weak heart, take extra precautions careful of broken glass and the exposed inside of when setting functions such as the vibrator and the handset. ringtone volume for incoming calls. May cause burns, bodily injury, electric shock, etc. if you May have harmful effects on your heart. touch the broken or exposed parts. If you are using electronic medical equipment etc., If the internal battery leaks or emits an unusual contact the respective manufacturer or dealer to odor, immediately stop using the handset and check whether the operation of the equipment is move it away from any naked flames or fire. affected by signals. The battery fluid is flammable and could ignite, causing a May interfere with the operation of electronic medical fire, explosion, etc. equipment etc. Do not allow a pet etc. to bite the handset. May cause fires, burns, bodily injury, etc. because of catching fire, exploding, overheating or leaking of the internal battery. 12 Contents/Precautions

If the substance etc. inside the internal battery Caution leaks, do not get the liquid on your skin (face, hands, etc.). For using a motion sensor and geomagnetic May result in damage to your eyes, skin, etc. sensor, check the safety around, hold the handset If the internal substance etc. comes into contact with your and do not swing it more than necessary. eyes, mouth, skin or clothes, immediately rinse the May cause an accident such as bodily injury. contacted area with clean water. If the display is broken and the internal substance Also, if it comes into contact with your eyes or mouth, seek etc. then leaks, do not get it on your skin (face, medical treatment immediately after rinsing the contacted area. hands, etc.), clothes, etc. May result in damage to your eyes, skin, etc. When removing the nano UIM card, be careful If the internal substance etc. comes into contact with your with the tip of the SIM eject tool or paper clip not eyes, mouth, skin or clothes, immediately rinse the to injure any part of your body such as fingers. contacted area with clean water. May cause bodily injury etc. if you touch the tip of the Also, if it comes into contact with your eyes or mouth, seek SIM eject tool or paper clip. medical treatment immediately after rinsing the contacted area. If you use the handset in a vehicle, contact the Do not dispose of the handset in ordinary garbage. vehicle manufacturer or dealer to check whether May cause fires, burns, bodily injury, etc. because of the operation of the vehicle is affected by signals. catching fire. Also, may damage to the environment. Take May interfere with the operation of electronic equipment in the unnecessary handset to a sales outlet such as a ●●● some vehicle models. In this case, stop using the handset. Shop or follow the instructions by a local institution that handles used handsets. If any trouble on your skin occurs due to using the handset, immediately stop using it and seek medical treatment. Use of the handset may cause itching, rashes, eczema, etc. depending on your constitution or health condition. Refer to the following for details on materials of each part. ☞ P.17 “Material list” 13 Contents/Precautions

Make sure that there is no metal (a blade of cutter, Do not short-circuit the charger terminal when staple, etc.) on the handset because the earpiece connected to an outlet or accessory socket. Also, section, speaker section and back camera section do not allow any part of your body (hands, fingers, contain parts that generate magnetic waves. etc.) to come into contact with the charger terminal. May cause bodily injury etc. because of the adhered object. May cause fires, burns, electric shock, etc. Look at the display in a well-lit place, keeping a Do not place heavy objects on the cord of the certain distance. adapter or apply excessive force on it such as Eyesight may be weakened etc. if you look at it in a dark pulling it. place or closely. May cause fires, burns, electric shock, etc. When plugging/unplugging an AC adapter into/ Handling adapters from the outlet, do not allow metallic objects to come into contact with the prongs of the plug. May cause fires, burns, electric shock, etc. Warning Do not connect the voltage converter for overseas travel (travel converter) to the AC adapter. Do not use if the cord of the adapter is damaged. May catch fire, or cause overheat, electric shock, etc. May cause fires, burns, electric shock, etc. Do not apply excessive force on the connection Never use the adapter in humid locations such as a part with the adapter connected to the handset. bathroom. May cause fires, burns, bodily injury, electric shock, etc. May cause fires, burns, electric shock, etc. Do not handle the cord, charger terminal or power The DC adapter should only be used in negative plug of the adapter with wet hands. grounded vehicles. Never use it in positive May cause fires, burns, electric shock, etc. grounded vehicles. May cause fires, burns, electric shock, etc. Do not touch adapters if you hear thunder. May cause electric shock etc. 14 Contents/Precautions

Always use the specified power supply and voltage. When plugging/unplugging an adapter into/from When using overseas, use the AC adapter that is the handset, plug/unplug it straightly toward the available overseas. terminal to connect, not applying excessive force Using the incorrect power supply and voltage may cause on it such as pulling the cord. fires, burns, electric shock, etc. May cause fires, burns, bodily injury, electric shock, etc. if AC adapter: 100V AC (Connect only with a household AC you do not plug/unplug it correctly. outlet) If the charger terminal is deformed such as bending AC adapter available overseas: 100 to 240V AC (Connect it, immediately stop using. Also, do not use the only with a household AC outlet) DC adapter: 12/24V DC (for negative grounded vehicles deformed one by returning it to the original shape. only) May cause fires, burns, bodily injury, electric shock, etc. because of short circuit of it. If you replace the fuse in the DC adapter, always replace it with a specified fuse. Unplug the power plug of the adapter from the May cause fires, burns, electric shock, etc. if you use the outlet or accessory socket when not using. fuse other than specified one. Refer to the respective May cause fires, burns, electric shock, etc. if you leave the manuals for information on specified fuses. power plug with it plugged into the outlet or accessory socket. Wipe off any dust on the power plug. May cause fires, burns, electric shock, etc. if you use the If water or other liquids (drinking water, sweat, power plug with dust adhering. seawater, pet urine, etc.) enter the equipment, immediately remove the power plug from the outlet Fully plug the adapter into the outlet or accessory or accessory socket. socket. May cause fires, burns, electric shock, etc. May cause fires, burns, electric shock, etc. if you do not insert it securely. Always unplug the power plug from the outlet or accessory socket before cleaning the equipment. Always grasp the adapters when unplugging the May cause fires, burns, electric shock, etc. if you do not power plug from the outlet or accessory socket. Do unplug it. not apply excessive force on it such as pulling the cord of the adapter. May cause fires, burns, electric shock, etc. since the cord of the adapter is damaged by pulling it. 15 Contents/Precautions

Handling near electronic medical equipment Caution Do not touch the adapter for a long time when Warning connected to an outlet or accessory socket. May cause burns etc. If you have electronic medical equipment such as an implanted cardiac pacemaker or an implanted cardioverter-defibrillator, always carry or use your Handling nano UIM card handset at least 15 cm away from your implant. Electromagnetic signals may have harmful effects on the operation of the electronic medical equipment. Caution Patients receiving medical treatment away from a Be careful with the cutting surface not to injure any medical facility (e.g. home treatment) who are part of your body such as fingers when handling using electronic medical equipment other than the nano UIM card. implanted cardiac pacemakers or implanted May cause bodily injury etc. cardioverter-defibrillators should consult the respective manufacturers etc. for information regarding the effects of signals on the equipment. Electromagnetic signals may have harmful effects on the operation of the electronic medical equipment. 16 Contents/Precautions

If there is any chance that the distance between the Material list handset and a person closest to you may get shorter than 15 cm such as when you cannot freely Handset move around, set the handset not to emit radio Part Material/Surface treatment wave in advance (by setting Airplane mode, turning ●●●● ● ●● ●●● the power off, etc.). ●●●● ●● ●●● Somebody nearby may be equipped with electronic medical ●●●● ●●● ●● equipment such as an implanted cardiac pacemaker or an ●●●● ●●● ●● implanted cardioverter-defibrillator. Electromagnetic signals ●●●● ●●● ●● may have harmful effects on the operation of the electronic medical equipment. ●●●● ●●● ●● ●●●● ●●● ●● Follow the instructions given by the respective ●●●● ●●● ●● medical facilities regarding the use of the handset ●●●● ●●● ●● on their premises. May have harmful effects on the operation of the electronic ●●●● ●●● ●● medical equipment. ●●●● ● ●●● ●● ●●●● ●●● ●● ●●●● ●●● ●● 17 Contents/Precautions

Handling the sample (SIM eject tool) Warning The tip of the SIM eject tool is sharp. Do not use it pointing at yourself or others. May hit you or others around you, resulting in bodily injury, loss of eyesight, etc. Handling precautions General notes z SH-03K is waterproof/dustproof, however, do not allow liquid such as water (drinking water, sweat, seawater, pet urine, etc.) and foreign object such as dust to get inside the handset and do not allow them to adhere to accessories or optional parts. 18 Contents/Precautions

The adapter, nano UIM card and TV antenna cable are not z Use only optional parts specified by ●●●. waterproof/dustproof. Do not use in humid or steamy areas such as May cause a malfunction or damage when optional parts other than bathrooms and avoid exposing to rain and other forms of moisture. If those specified by ●●● are used. they are carried close to the skin, perspiration may cause internal z Read the respective user's guides supplied with supported components to corrode and result in malfunction. If a problem is found optional parts carefully. to be due to moisture, the handset and parts are not covered by z Do not drop or otherwise subject the equipment to severe warranty. For details on repair, contact the number listed in impact. “Repairs” (in Japanese only) on the last page or a repair counter that May cause a malfunction or damage. ●●● specifies. z Clean only with a soft and dry cloth (such as the type used Notes about the handset for eyeglasses). y Forceful rubbing of the display with a dry cloth etc. may scratch its z Do not forcefully press the display or operate with a pointed surface. object. y Water drops, dirt, etc. left on the display may cause stains to form May scratch it and cause malfunction or damage. on its surface. z Avoid using the handset in extremely high or low y Never use chemicals such as alcohol, thinners, benzene or temperatures. detergents, as these agents may erase the printing or cause Use the handset within the range of a temperature between 5℃ and discoloration. 35℃ and a humidity between 45% and 85%. z Occasionally clean terminals, the fingerprint, etc. Refer to the following for details on using it at a bathroom. When using unclean terminals etc., they may not work properly. z Using the handset close to land-line phones, TVs, radios, Be careful with the terminals etc. while cleaning them. etc. may have harmful effects on the operation of such z Do not place the equipment near an air conditioning vent. equipment. Move as far away as possible from such items Condensation formed due to rapid changes in temperature may cause before use. internal corrosion and lead to a malfunction. z Back up to the microSD Card, PC, cloud, etc. or keep a z Do not apply excessive force on the handset when using it. separate memo noting data stored on the handset. Carrying the equipment in a tightly packed bag or sitting on it put in your pocket may cause damage to the display, internal components, ●●● shall not be liable for any loss of content. internal battery, etc. or result in a malfunction. Keeping an external connector device plugged into the external connection jack may cause damage or a malfunction. 19 Contents/Precautions

z When connecting an external connector device to the z The internal battery is not covered by warranty because it is external connection jack, do not put it in obliquely and do a consumable product. not pull it while it is plugged in. Depending on usage, the internal battery may swell as it approaches May cause a malfunction or damage. the end of its usable life. Change the battery if the its life becomes z The handset becomes warm during use or charging but this extremely shorter or the it swells even after fully charged.For details is not a malfunction. on replacing the internal battery, contact the number listed in z Do not leave the camera lens in direct sunlight. “Repairs” (in Japanese only) on the last page or a repair counter that May cause discoloration or burn-in of pixels. ●●● specifies. z Use the handset with the nano UIM Card and microSD Card z Charge battery in areas where ambient temperature is tray closed. between 5℃ and 35℃ . Liquid such as water (drinking water, sweat, seawater, pet urine, etc.) z The battery life depends on the usage and deterioration of or foreign object such as dust may get inside and cause a malfunction. the battery. z Do not give a strong impact on the fingerprint sensor or z Do not store the handset under the following situations scratch the surface. because they may lower the performance or shorten the May cause not only malfunction of the fingerprint sensor but also usable life of the internal battery. disabling authentication. y Storage with the internal battery fully charged (immediately after z While using a microSD Card, do not remove the card or turn charging is completed) off the handset. y Storage with no battery level (cannot turn the handset on) May cause data loss or a malfunction. Approximately 40% is recommended as the proper battery level for z Never place a magnetic card or magnetized items near the storage. handset. z The following is the type of the internal battery built into the The stored magnetic data in cash cards, credit cards, telephone handset. cards, floppy disks, etc. may be erased. Label Battery type Putting highly magnetized items closer may cause an error. z Do not decorate the handset with films, stickers, etc. Li-ion00 Lithium-ion The operation such as each function for using the proximity sensor/ z The surface of the handset uses the aluminum material. brightness sensor may not work normally. Note that dent and abrasion are easily remained as Refer to the following for details on the position of the proximity aluminum is a soft material. sensor/brightness sensor. ☞ P. 28 “Part names and functions” 20 Contents/Precautions

Notes about adapters z Clean only with a soft and dry cloth (such as the type used for eyeglasses). z Charge the battery in areas where the ambient temperature z Back up to the microSD Card, PC, cloud, etc. or keep a is between 5℃ and 35℃ . separate memo noting data stored on the nano UIM card. z Do not charge the internal battery in the following locations. ●●● shall not be liable for any loss of content. y Areas with high humidity or dust, or in areas exposed to frequent z To protect the environment, please take any unneeded nano vibrations UIM cards to a sales outlet such as a ●●● Shop. y Close to land-line phones, TVs, radios, etc. z Do not damage, touch haphazardly or short-circuit the IC. z Adapters may become warm during charging but this is not May cause data loss or a malfunction. a malfunction. z Do not drop or otherwise subject the nano UIM card to z Do not use the DC adapter to charge the battery when the severe impact. car engine is not running. May cause a malfunction. May cause the car battery to run down. z Never bend the nano UIM card or place heavy objects on it. z When using an outlet with a feature to prevent the plug from May cause a malfunction. being removed accidentally, follow the instructions in the z Do not insert the nano UIM card to the handset with a label, outlet user's guide. sticker, etc. attached on the card. z Do not subject to strong impacts. Also, do not deform the May cause a malfunction. charger terminals. May cause a malfunction. Notes about nano UIM card z Do not apply unnecessary force when inserting/removing the nano UIM card. z Customer is responsible for malfunctions arising from inserting nano UIM card into a different IC card reader/ writer etc. z Occasionally clean IC area. When using the nano UIM card while IC area is not clean, it may not work properly. 21 Contents/Precautions

Notes on using Bluetooth function z Cautions on using Bluetooth devices Bluetooth operates at radio frequencies assigned to the in-house z The handset supports the security function that meets the radio stations for a mobile object identifier that have to be Bluetooth specification for security during communication licensed and are used in production lines of a factory, specific using Bluetooth functions. However, the security may not unlicensed low power radio stations, and amateur radio stations be sufficient depending on the configuration etc. Take care (hereafter, referred to as “another radio station”) in addition to of the security while making communication using industrial, scientific and medical devices or home electric Bluetooth function. appliances such as microwave ovens. z Even if any leak of data or information occurs while making 1. Before using the handset, make sure that “another radio communication using Bluetooth function, ●●● shall not be station” is not operating nearby. liable for any loss of content. 2. If radio interference between the handset and “another z Radio frequencies radio station” occurs, avoid interference by moving In the home screen, [ ]▶[Settings]▶[About phone]▶ immediately to another place or “turning off the power”. [Authentication] to confirm the radio frequencies the Bluetooth 3. Contact the number listed in “General Inquiries” on the function of the handset uses. The followings are the descriptions: last page for further details. ① ② ③ ④ ⑤ Notes about wireless LAN (WLAN) z Wireless LAN (WLAN) uses radio waves to communicate information. Therefore, it has an advantage of freely ⑥ connecting to the LAN within the service area. On the other ① 2.4: This radio equipment uses the 2,400 MHz band. hand, if security setting is not set, it is possible for a ② FH: The modulation system is the FH-SS system. malicious third party to intercept the communication ③ 4: The estimated coverage distance is 40 m or less. contents or hack. It is recommended to set security setting ④ XX: Another modulation system is used. at your own risk and judgement. ⑤ 8: The estimated coverage distance is 80 m or less. z Wireless LAN ⑥ : All radio frequencies between 2,400 MHz and Do not use wireless LAN near magnetic devices such as electric 2,483.5 MHz are used and the frequencies for mobile object appliances or AV/OA devices or in radio waves. identifiers cannot be avoided. y Magnetism or radio waves may increase noises or disable communications (especially when using a microwave oven). 22 Contents/Precautions

y When used near TV, radio, etc., reception interference may occur z Cautions on using 2.4 GHz devices or channels on the TV screen may be disturbed. WLAN-installed devices operate at radio frequencies assigned y If there are multiple wireless LAN access points nearby and the to the in-house radio stations for a mobile object identifier (radio same channel is used, search may not work correctly. stations requiring a license) used in production lines of a factory, z Radio frequencies specific low power radio stations (radio stations requiring no In the home screen, [ ]▶[Settings]▶[About phone]▶ license), and amateur radio stations (radio stations requiring a [Authentication] to confirm the radio frequencies the WLAN-installed license) in addition to industrial, scientific and medical devices or devices use. The followings are the descriptions: home electric appliances such as microwave ovens. ① ② ③ ④ 1. Before using this device, make sure that the in-house radio stations for a mobile object identifier, specific low power radio stations and amateur radio stations are not operating nearby. 2. If the device causes harmful radio interference to the in-house ⑤ radio stations for a mobile object identifier, immediately ① 2.4: This radio equipment uses the 2,400 MHz band. change the radio frequency or stop use, and contact the ② DS: The modulation system is the DS-SS system. number listed in “General Inquiries” on the last page for ③ OF: The modulation system is the OFDM system. crosstalk avoidance, etc. (e.g. partition setup). ④ 4: The estimated coverage distance is 40 m or less. 3. If the device causes radio interference to specific low power ⑤ : All radio frequencies between 2,400 MHz radio stations for a mobile object identifier or amateur radio and 2,483.5 MHz are used and the frequencies for mobile object stations, contact the number listed in “General Inquiries” on identifiers can be avoided. the last page for further details. Available channels for the handset's wireless LAN are between 1 and 13. Note that other channel access points cannot be connected. z Cautions on using 5 GHz devices Available channels may vary depending on the country. In the 5 GHz frequency band, three bands of 5.2 GHz/5.3 For use in an aircraft, contact the airline beforehand. GHz/5.6 GHz band (W52/W53/W56) are available. y W52 (5.2 GHz band/36, 40, 44, 48 ch) y W53 (5.3 GHz band/52, 56, 60, 64 ch) y W56 (5.6 GHz band/100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch) Using 5.2 GHz/5.3 GHz band wireless LAN (W52/W53) outdoors is prohibited by the Radio Law. 23 Contents/Precautions

Voluntary control for radio wave interference FeliCa and NFC reader/writer z This product satisfies technical requirements based on z The FeliCa, NFC reader/writer and P2P function of the VCCI Rules for Voluntary Control Measures and its satisfied handset use weak radio waves whose handling does not mark is displayed on the electronic nameplate of the require a license of radio station. product. z The frequency in use is the 13.56 MHz band. When another You can see the electronic nameplate by operating the product FeliCa, NFC reader/writer or P2P function is being used as follows. nearby, keep enough distance from it. Make sure that there In the home screen, [ ]▶[Settings]▶[About phone]▶ is no radio station using the same frequency band in the [Authentication] nearby area. z For use in an aircraft, contact the airline beforehand. Use of the function may be restricted in some countries. Check conditions such as regulations of the country/region to use the function. Notes about the sample (SIM eject tool) z Do not insert the SIM eject tool into the hole etc. other than those for ejecting the nano UIM Card and microSD Card tray. May cause a malfunction or damage. z Do not apply excessive force on the SIM eject tool when using it. May cause a malfunction or damage. z When discarding, segregate it according to the local rules. z Use the SIM eject tool only for the intended purpose in this manual. May cause a malfunction or damage. z Do not use the SIM eject tool for other mobile phones. May cause malfunction or damage of other mobile phones. 24 Contents/Precautions

Caution z Never use the handset that is modified. Using a modified device violates the Radio Law and/or the Telecommunications Business Law. The handset follows the regulations regarding the certification of conformity with technical regulations for specific radio stations etc. based on the Radio Law and authentication of conformity with technical regulations for devices etc. based on the Telecommunications Business Law, and the “Technical Conformity Mark ” can be displayed on the electronic nameplate of the handset as a proof. You can see it by operating as follows. In the home screen, [ ]▶[Settings]▶[About phone]▶[Authentication] If the screws of the handset are removed and a modification is given to the inside, the certification of conformity with technical regulations etc. will become invalid. Never use the handset without the valid certification etc. Doing so violates the Radio Law and/or the Telecommunications Business Law. z Be careful when using the handset while driving a motor vehicle. Using the handset in hand while driving is regarded as a punishable act. However, the punishment has no application in some cases such as when rescuing sick and injured people or maintaining public safety. z The FeliCa reader and NFC reader/writer function of the handset conform to the domestic radio wave standards. When you use it overseas, check conditions such as regulations of the country/region in advance. z Never change the basic software improperly. This may be regarded as a conversion of software and repairs may be refused. 25 Contents/Precautions

1 Nano UIM Card and microSD Card tray Before Using the Handset z The tray for inserting the nano UIM Card and microSD Card is stowed. Part names and functions z For details on nano UIM card ☞ P.31“nano UIM card” z For details on microSD Card ☞ P.33 “microSD Card” 2 Earphone/Microphone terminal 3 Earpiece 4 Proximity sensor/Brightness sensor*1 z The proximity sensor detects the distance to the face and prevents inadvertent operation of touch panel during a call. z The brightness sensor detects the brightness of the surrounding area and adjusts the brightness of the backlight. 5 Incoming/Charging lamp z For details on incoming/charging lamp ☞ P.55 “Incoming/ Charging lamp” 6 Front camera z For details on using camera ☞ P.119 “SHCamera” 7 Display/Touch panel z For details on operation of the touch panel ☞ P.38 “Operation of touch panel” 8 Fingerprint sensor z Use to unlock the touch panel etc. by fingerprint authentication. z For details on using fingerprint sensor authentication” ☞ P.161 “Fingerprint (This drawing is not final) 28 Before Using the Handset

9 Microphone z Use when recording videos. z Use to measure ambient noises for communicating by making your voices sound clear when using Clear talk. z Use as a mouthpiece during a hands-free call. a Video camera b Still image camera a 1/2: Volume up/down key z Adjusts the volume in each function. b 0: Power key z Use to turn the power on/off, etc. z Use to turn the display on/off. ☞ z For details on operation of the power key P.37 “Turning power on/off” d Mobile light e #mark z IC card is contained (It cannot be removed). z For details on using # mark ☞ P.108 “Osaifu-Keitai”, P.176 “NFC communication” (This drawing is not final) 29 Before Using the Handset

*1 Do not cover the sensor area with your hand or paste a sticker etc. on the sensor area. The sensor may not work properly. *2 The antenna of back is built into the main body. At sides of the handset, the metal sections of surface are used as the antenna. Covering the antenna area with your hand may influence the communication quality. z The back cover cannot be removed. Removing it forcibly may cause damage or malfunction. Mobile light z The mobile light may be automatically turned off if you use the handset for a long time or the handset becomes warm after the (This drawing is not final) mobile light is turned on. Also, you may not be able to use the mobile light if the handset is warm. Microphone h Speaker z When using functions which support the microphone, do not z Ringtone, music, etc. can be heard from here. cover the hole of the microphone. z The other party's voice can be heard from here during a hands-free call. Earphone/Microphone g USB Type-C connection jack z Depending on the type of the earphone/microphone, it may not z For details on connection to an external device ☞ P.35 be available. “Charging”, P.36 “PC connection”, P.179 “USB host function” f Mouthpiece/Microphone z Use as a microphone when recording videos or talking to EMOPA. 30 Before Using the Handset

Charging with AC adapter 3 When charging is complete, pull the AC adapter When charging with AC Adapter (sold separately), carry out power plug from the outlet and remove the the following operations. Type-C plug of the AC adapter horizontally from the USB Type-C connection jack 1 Insert the Type-C plug of the AC adapter horizontally into the USB Type-C connection z Refer to user's guide of AC Adapter. jack on the handset z The shape of the plug for the AC adapter is for 100V AC (for domestic use). To use the AC adapter of 100 to 240V AC 2 Erect the AC adapter power plug and insert it overseas, a conversion plug adapter applicable to your into an outlet country of stay is required. Do not use a voltage converter for z The charging lamp illuminates and charging starts. overseas travel to charge the battery. z When charging is complete, the charging lamp turns off. z Note that inserting or removing the equipment forcibly may Charging lamp cause damage to the USB Type-C connection jack and the AC adapter Type-C plug or result in a malfunction. Charging with DC adapter The DC adapter (sold separately) supplies the power for charging from a car accessory socket (12 and 24 V). z The DC adapter should only be used in negative grounded USB Type-C connection jack vehicles (12 and 24V DC). z Do not use with the car engine shut off. May drain the car battery. z The DC adapter fuse is a consumable product. For replacement, purchase a new fuse at a nearest auto parts retailer etc. z Refer to the user's guide of DC Adapter for details. (This drawing is not final) Type-C plug 36 Before Using the Handset

Charging with USB Cable „ Turning display on/off The display is turned off when 0 is pressed or the handset is not You can charge the handset by connecting the handset to in use for a set length of time. a PC with USB cable (sold separately) etc. ☞ Press 0 while the display is turned off to turn it on. z For details on connecting to a PC P.178 “PC connection” „ Touch panel lock Turning power on/off When the power or the display is turned on, the touch panel is locked. „ Turning power on Touch [ ] to unlock. 1 0(for at least 2 seconds) z When you turn the power on for the first time, make the initial ☞ settings ( P.48 “Initial settings”). „ Turning power off/Reboot/Emergency mode 1 0(for at least 1 second) 2 Select an item „ Power off：Turn off the handset. „ Restart：Reboot the handset. „ Emergency mode：For details ☞P.41 “Emergency mode” Operations in touch panel lock screen z To set/disable the manner mode: 2 (for at least 2 seconds) z To activate SHCamera: [ ] z To activate Clock: Touch the clock z To display the detailed information on notifications: Drag the clock down z To display the status panel: Drag the status bar down 37 Before Using the Handset

„ Touch „ Pinch out/Pinch in Touch a key or an item displayed on the screen and then release You may be able to zoom the screen in/out etc. by putting two your finger from it to select or set it. fingers on the touch panel and moving them with putting a distance between two fingers apart (pinch out)/closer (pinch in) depending on the function and screen in use. „ Touch and hold When you keep your finger on the touch panel, a menu may appear depending on the function and screen in use. Operation while using function „ Slide (Swipe)/Drag „ Navigation keys Move your finger while keeping it on the touch panel to scroll the Use the navigation keys displayed at the bottom of the screen to screen or move an icon, a widget, etc. to the desired position. perform the basic operations. In addition, when you touch a menu or an item by mistake, move your finger away from it to cancel the selection. 1 A/@:Back key/Close key z Return to the previous screen. „ Flick z Close the keyboard. Move your finger like sweeping the touch panel in the home screen 2 B:Home key etc. to switch pages. z Display the home screen. 3 C/D:Recent Apps key/Multi window key z Display Recent Apps ( ☞ P.61 “Recent Apps”). z Indicates you are using Multi window ( ☞ P.62 “Multi window”). 39 Before Using the Handset

Wi-Fi settings 1 In the home screen, [ ]▶[Settings]▶[Wi-Fi] If you use Wi-Fi function of the handset, you can use mail or 2 Set to On Internet by connecting to access points of your home, corporate network or public wireless LAN service. 3 Select an access point z If you select an access point protected by security, enter the Radio interference with Bluetooth devices password (security key) and select [CONNECT]. z Wireless LANs (IEEE 802.11b/g/n) use the same frequency z To register access points manually: [Add network]▶enter the band (2.4 GHz) as Bluetooth devices. Therefore, using the network name▶set security▶[SAVE] wireless LAN device near a Bluetooth device may cause radio z When you select an access point and connect to it with a interference, lowering of communication speed, noise or wrong password (security key), [IP Configuration Failure], [WiFi connection failure. In this case, turn off the Bluetooth device or Connection Failure], [Authentication problem] or [Connected keep the handset and the wireless LAN device at least (Limited)] is displayed. Confirm the password (security key). approximately 10 m away from the Bluetooth device. When [IP Configuration Failure] or [Connected (Limited)] is displayed after entering the correct password (security key), z Packet communication is also available while [Wi-Fi] is set to On. you may not have acquired the correct IP address. Connect to Wi-Fi connection is prioritized while Wi-Fi connection is set, but the access point again after confirming signal status. the connection is automatically switched to that of LTE/3G/GPRS network once Wi-Fi connection is terminated. Note that packet z As for the manual registration of an access point, this function communication charges may be incurred in this case. supports WEP, WPA/WPA2 PSK and 802.1xEAP as the security z Refer to the manual of your wireless LAN base unit when using setting. the access point at home etc. z If you connect to an access point which is not connected to the z Operate access point registration near the access point. Internet, [ ] is displayed and the communication may be made by mobile networks, not Wi-Fi connection. To make Wi-Fi communication by using such an access point, enable [Using this AP without internet connection] of Advanced options before connecting to the access point. 50 Before Using the Handset

This mobile phone can be used in positions other than against your Specific Absorption Rate (SAR) of head. Please keep the mobile phone farther than 1.0 cm away Mobile Phones from your body by using such as a carrying case or a wearable accessory without including any metals. This mobile phone satisfies This model SH-03K mobile phone complies with Japanese the technical regulations and international guidelines. technical regulations and international guidelines regarding The World Health Organization has stated that “a large number of exposure to radio waves. studies have been performed over the last two decades to assess This mobile phone was designed in observance of Japanese whether mobile phones pose a potential health risk. To date, no technical regulations regarding exposure to radio waves (*1) and adverse health effects have been established as being caused by limits to exposure to radio waves recommended by a set of mobile phone use.” equivalent international guidelines. This set of international Please refer to the WHO website if you would like more detailed guidelines was set out by the International Commission on information. Non-Ionizing Radiation Protection (ICNIRP), which is in (http://www.who.int/docstore/peh-emf/publications/facts_press/ fact_ collaboration with the World Health Organization (WHO), and the english.htm) permissible limits include a substantial safety margin designed to Please refer to the websites listed below if you would like more assure the safety of all persons, regardless of age and health detailed information regarding SAR. condition. The technical regulations and international guidelines set out limits Ministry of Internal Affairs and Communications Website: for radio waves as the Specific Absorption Rate, or SAR, which is （http://www.tele.soumu.go.jp/e/sys/ele/index.htm） the value of absorbed energy in any 10 grams of tissue over a Association of Radio Industries and Businesses Website: 6-minute period. The SAR limit for mobile phones is 2.0 W/kg. The （http://www.arib-emf.org/01denpa/denpa02-02.html ）(in Japanese highest SAR value for this mobile phone when tested for use near only) the head is x.xxxW/kg (*2) and when worn on the body is SHARP Corporation Website: ● x.xxxW/kg (*3). There may be slight differences between the （http://k-tai.sharp.co.jp/support/sar/ (in Japanese only)） *1 Technical regulations are defined by the Ministerial SAR levels for each product, but they all satisfy the limit. The actual SAR of this mobile phone while operating can be well Ordinance Related to Radio Law (Article 14-2 of Radio below that indicated above. This is due to automatic changes to Equipment Regulations). the power level of the device to ensure it only uses the minimum required to reach the network. Therefore in general, the closer you are to a base station, the lower the power output of the device. 201 Appendix/Index

*2 Including other radio systems that can be simultaneously Regulatory information used with LTE/FOMA. *3 Including other radio systems that can be simultaneously * The following EU and EFTA member countries: used with LTE/FOMA. Belgium (BE), Bulgaria (BG), Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), European RF Exposure Information Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Your mobile device is a radio transmitter and receiver. It is Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), designed not to exceed the limits for exposure to radio waves Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), recommended by international guidelines. These guidelines were Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), developed by the independent scientific organization ICNIRP and Finland (FI), Sweden (SE) and United Kingdom (UK), include safety margins designed to assure the protection of all Switzerland (CH), Liechtenstein (LI), Iceland (IS), Norway (NO). persons, regardless of age and health. The guidelines use a unit of measurement known as the Specific Norway: Use of this radio equipment is not allowed in the Absorption Rate, or SAR. The SAR limit for mobile devices is geographical area within a radius of 20 km from the centre of 2 W/kg and the highest SAR value for this device when tested at Ny-Alesund, Svalbard. the ear is 0.20 W/kg* and when worn on the body is 1.09 W/kg* . Hereby, SHARP CORPORATION declares that the radio equipment type For body-worn operation, this mobile device has been tested and SH-03K is in compliance with Directive 2014/53/EU. meets the RF exposure guidelines when used with an accessory The full text of the EU declaration of conformity is available at the following internet address: containing no metal and positioning the handset a minimum of 5 (http://www.sharp.co.jp/k-tai/) mm from the body. Use of other accessories may not ensure compliance with RF exposure guidelines. Manufacturer's Address: As SAR is measured utilizing the devices highest transmitting SHARP CORPORATION, power the actual SAR of this device while operating is typically 1 Takumi-cho, Sakai-ku, Sakai-shi, Osaka 590-8522, Japan below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum level required to reach the network. * The tests are carried out in accordance with international guidelines for testing. 202 Appendix/Index

z Description of accessories WLAN 2.4 GHz Tx/Rx 2412 to 2472 MHz (BW: 20MHz only) Headset, Handsfree Φ3.5 audio jack, Bluetooth. USB cable For charging, peripherals, etc. W52(U-NII 1): microSD Card microSD/microSDHC/microSDXC Tx/Rx 5180 to 5240 MHz (BW: 20MHz) Tx/Rx 5190 to 5230 MHz (BW: 40MHz) nano UIM card/non nano UIM cards Tx/Rx 5210 MHz (BW: 80MHz) non-nano UIM cards can be used W53(U-NII 2A): nano UIM card after SIMunlocking the handset. Tx/Rx 5260 to 5320 MHz (BW: 20MHz) WLAN 5 GHz Tx/Rx 5270 to 5310 MHz (BW: 40MHz) Tx/Rx 5290 MHz (BW: 80MHz) z Frequency range of supported bands in EU W56(U-NII 2C): Tx/Rx 5500 to 5700 MHz (BW: 20MHz) Tx 880.2 to 914.8 MHz Tx/Rx 5510 to 5670 MHz (BW: 40MHz) GSM 900 Rx 925.2 to 959.8 MHz Tx/Rx 5530 to 5610 MHz (BW: 80MHz) Tx 1710.2 to 1784.8 MHz NFC Tx/Rx 13.56 MHz DCS 1800 Rx 1805.2 to 1879.8 MHz GNSS GPS: Rx L1 (1575.42 MHz) Tx 1922.4 to 1977.6 MHz GLONASS: Rx G1 (1598.0625 to 1605.375 WCDMA FDD I Rx 2112.4 to 2167.6 MHz MHz) Tx 1922.5 to 1977.5 MHz Galileo: Rx E1 (1575.42 MHz) LTE Band 1 BeiDou: Rx B1 (1561.098 MHz) Rx 2112.5 to 2167.5 MHz Tx 1710.7 to 1784.3 MHz LTE Band 3 Rx 1805.7 to 1879.3 MHz Tx 704.5 to 746.5 MHz LTE Band 28 Rx 759.5 to 801.5 MHz Tx 2402 to 2480 MHz Bluetooth Rx 2402 to 2480 MHz 203 Appendix/Index

z Maximum transmit power Volume level caution GSM 900 +33 dBm (Power Class4) To prevent possible hearing damage, do not listen at high volume levels for long periods. DCS 1800 +30 dBm (Power Class1) WCDMA FDD I +24 dBm (Power Class3) Earphone Signal Level LTE Band 1 +23 dBm (Power Class3) The maximum output voltage for the music player LTE Band 3 +23 dBm (Power Class3) function, measured in accordance with EN 50332-2, is ●●●.● mV. LTE Band 28 +23 dBm (Power Class3) Bluetooth +7.3 dBm (Power Class1) WLAN 2.4 GHz +18.0 dBm (ANT1 + ANT2) WLAN 5 GHz +18.0 dBm (ANT1 + ANT2) NFC 0 dBμA/m at 10 m FCC Notice z This device complies with part 15 of the FCC Rules. Battery - CAUTION Operation is subject to the following two conditions: Use specified Charger only. (1) This device may not cause harmful interference, and (2) this Non-specified equipment use may cause malfunctions, electric device must accept any interference received, including shock or fire due to battery leakage, overheating or bursting. interference that may cause undesired operation. The battery is embedded inside the product. Avoid removing the z Changes or modifications not expressly approved by the embedded battery since this may cause overheating or bursting. manufacturer responsible for compliance could void the user's authority to operate the equipment. Do not dispose of the product with ordinary refuse. Take the product to an au Shop, or follow the local disposal regulations. 5 GHz WLAN Operation in USA Within the 5.15-5.25 GHz band, UNII devices are restricted to Charge battery in ambient temperatures between 5°C and 35°C; indoor operations to reduce any potential for harmful interference outside this range, battery may leak/overheat and performance to co-channel Mobile Satellite Services (MSS) operations. may deteriorate. 204 Appendix/Index

Information to User The exposure standard for wireless handsets employs a unit of This equipment has been tested and found to comply with the limits measurement known as the Specific Absorption Rate, or SAR. The of a Class B digital device, pursuant to Part 15 of the FCC Rules. SAR limit set by the FCC is 1.6 W/kg. These limits are designed to provide reasonable protection against The tests are performed in positions and locations (e.g., at the ear harmful interference in a residential installation. This equipment and worn on the body) as required by the FCC for each model. generates, uses and can radiate radio frequency energy and, if not The highest SAR value for this model handset when tested for use installed and used in accordance with the instructions, may cause at the ear is 0.31W/kg and when worn on the body, as described harmful interference to radio communications. in this user guide, is 0.53W/kg. However, there is no guarantee that interference will not occur in a For body worn operation, this phone has been tested and meets particular installation; if this equipment does cause harmful the FCC RF exposure guidelines. Please use an accessory interference to radio or television reception, which can be designated for this product or an accessory which contains no determined by turning the equipment off and on, the user is metal and which positions the handset a minimum of 1.0 cm from encouraged to try to correct the interference by one or more of the the body. following measures: The use of accessories that do not satisfy these requirements may 1. Reorient/relocate the receiving antenna. not comply with FCC RF exposure requirements, and should be 2. Increase the separation between the equipment and receiver. avoided. 3. Connect the equipment into an outlet on a circuit different from The FCC has granted an Equipment Authorization for this model that to which the receiver is connected. handset with all reported SAR levels evaluated as in compliance 4. Consult the dealer or an experienced radio/TV technician for with the FCC RF emission guidelines. SAR information on this help. model handset is on file with the FCC and can be found under the FCC RF Exposure Information Display Grant section of http://transition.fcc.gov/oet/ea/fccid/） after Your handset is a radio transmitter and receiver. searching on FCC ID APYHRO00259. It is designed and manufactured not to exceed the emission limits Additional information on Specific Absorption Rates (SAR) can be for exposure to radio frequency (RF) energy set by the Federal found on the FCC website at （http://www.fcc.gov/encyclopedia/ Communications Commission of the U.S. Government. radio-frequency-safety）.） The guidelines are based on standards that were developed by FCC ID Location independent scientific organizations through periodic and thorough The device is electronically labeled and the FCC ID can be evaluation of scientific studies. The standards include a substantial displayed via theSystem & the Authentication under the Settings safety margin designed to assure the safety of all persons, menu. regardless of age and health. 205 Appendix/Index

® The Bluetooth word mark and logos are owned by the Bluetooth SIG, INC. and any use of such marks by NTT DOCOMO, INC. is under license. Other trademarks and trade names are those of their respective owners.


Document Created: 2018-04-06 09:44:21
Document Modified: 2018-04-06 09:44:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC