Test Report_20190305_v1 - TestReport KL80180553R sharp DS-10HR FCC Part15C Felic

FCC ID: APY-BSC0003

Test Report

Download: PDF

FCCID_4192253

JQA File No. : KL80180553R Issue Date : March 5, 2019
Model No. : DS-10HR FCC ID : APY-BSC0003
Standard : CFR 47 FCC Rules and Regulations Part 15
Page 2 of 29

TABLE OF CONTENTS

Page
1 Description of the Equipment Under Test ...........................................................................................3
2 Summary of Test Results ......................................................................................................................4
3 Test Procedure .......................................................................................................................................5
4 Test Location ..........................................................................................................................................5
5 Recognition of Test Laboratory.............................................................................................................5
6 Description of Test Setup ......................................................................................................................6
7 Test Requirements.................................................................................................................................8

DEFINITIONS FOR ABBREVIATION AND SYMBOLS USED IN THIS TEST REPORT

EUT : Equipment Under Test EMC : Electromagnetic Compatibility
AE : Associated Equipment EMI : Electromagnetic Interference
N/A : Not Applicable EMS : Electromagnetic Susceptibility
N/T : Not Tested

- indicates that the listed condition, standard or equipment is applicable for this report.
- indicates that the listed condition, standard or equipment is not applicable for this report.

Technical document No. 23199-1601

JQA File No. : KL80180553R Issue Date : March 5, 2019
Model No. : DS-10HR FCC ID : APY-BSC0003
Standard : CFR 47 FCC Rules and Regulations Part 15
Page 5 of 29

3 Test Procedure

Test Requirements : §15.225, §15.207 and §15.209

Test Procedure : ANSI C63.10–2013
Testing unlicensed wireless devices.
KDB 414788 D01
Radiated Test Site v01r01: July 12, 2018
KDB 174176 D01
Line Conducted FAQ v01r01: June 3, 2015

4 Test Location

Japan Quality Assurance Organization (JQA)
KITA-KANSAI Testing Center
7-7, Ishimaru, 1-chome, Minoh-shi, Osaka, 562-0027, Japan
SAITO EMC Branch
7-3-10, Saito-asagi, Ibaraki-shi, Osaka 567-0085, Japan

5 Recognition of Test Laboratory

JQA KITA-KANSAI Testing Center SAITO EMC Branch is accredited under ISO/IEC 17025 by
following accreditation bodies and the test facility is registered by the following bodies.

VLAC Accreditation No. :
VLAC-001-2 (Expiry date : March 30, 2020)
VCCI Registration No. :
A-0002 (Expiry date : March 30, 2020)
FCC Accreditation No. :
JP5008 (Expiry date : March 30, 2020)
IC Registration No. :
2079E-3, 2079E-4 (Expiry date : June 26, 2020)
BSMI Registration No. :
SL2-IS-E-6006, SL2-IN-E-6006, SL2-R1/R2-E-6006, SL2-A1-E-6006
(Expiry date : September 14, 2019)
CNAS Accreditation No. : L8352 (Expiry date : February 19, 2019)

Accredited as conformity assessment body for Japan electrical appliances and material law by METI.
(Expiry date : February 22, 2019)

Technical document No. 23199-1601

JQA File No. : KL80180553R Issue Date : March 5, 2019
Model No. : DS-10HR FCC ID : APY-BSC0003
Standard : CFR 47 FCC Rules and Regulations Part 15
Page 6 of 29

6 Description of Test Setup

6.1 Test Configuration

The equipment under test (EUT) consists of :
Item Manufacturer Model No. Serial No. FCC ID
Handy Terminal
A Sharp DS-10HR -- APY-BSC0003
for Digital Picking

The auxiliary equipment used for testing :
Item Manufacturer Model No. Serial No. FCC ID
B USB Battery Charger RAVPOWER RP-PC028 0JPHJF8D N/A

Type of Cable:
Identification Connector Cable Ferrite Length
No. Description
(Manu. etc.) Shielded Shielded Core (m)
1 USB Cable -- YES YES NO 0.7
2 AC Cord -- -- NO NO 1.5

6.2 Test Arrangement (Drawings)

1) Battery Operation

A

2) USB Bus Power Operation

1 2
A B 120VAC 60Hz

Technical document No. 23199-1601

JQA File No. : KL80180553R Issue Date : March 5, 2019
Model No. : DS-10HR FCC ID : APY-BSC0003
Standard : CFR 47 FCC Rules and Regulations Part 15
Page 9 of 29

7.1.3 Test Method and Test Setup (Diagrammatic illustration)

The preliminary tests were performed using the scan mode of test receiver or spectrum analyzer
to observe the emissions characteristics of the EUT.
The EUT configuration, cable configuration and mode of operation were determined for producing
the maximum level of emissions.
This configurations was used for final tests.

– Side View –

NOTE
AMN : Artificial Mains Network

Technical document No. 23199-1601

JQA File No. : KL80180553R Issue Date : March 5, 2019
Model No. : DS-10HR FCC ID : APY-BSC0003
Standard : CFR 47 FCC Rules and Regulations Part 15
Page 10 of 29

7.1.4 Test Data

Test voltage : 120VAC 60Hz Test Date: December 4, 2018
Test condition : TX(the actual antenna connected) Temp.: 21 °C, RH: 67 %, Atm.: 1000 hPa
Measured phase : L1

Frequency Factor Readings Limits Results Margin Remarks
[dB(µV)] [dB(µV)] [dB(µV)] [dB]
[MHz] [dB] QP AVE QP AVE QP AVE QP AVE

0.1500 10.6 24.0 -- 66.0 56.0 34.6 -- + 31.4 -- -
0.2200 10.5 16.4 -- 62.8 52.8 26.9 -- + 35.9 -- -
0.4042 10.5 14.7 -- 57.8 47.8 25.2 -- + 32.6 -- -
0.5685 10.5 17.0 -- 56.0 46.0 27.5 -- + 28.5 -- -
0.6585 10.5 21.6 -- 56.0 46.0 32.1 -- + 23.9 -- -
13.5600 11.1 56.7 56.1 60.0 50.0 67.8 67.2 - 7.8 - 17.2 -
20.2700 11.5 13.8 -- 60.0 50.0 25.3 -- + 34.7 -- -

QP Limits AVE Limits QP AVE Maximum Sensitivity
80

70
Emission Level [dB(µV)]

60

50

40

30

20

10
0.15 0.3 1 3 10 30
Frequency [MHz]

NOTES
1) The spectrum was checked from 150 kHz to 30 MHz.
2) The factor includes the AMN voltage division factor and the cable loss.
3) The symbol of “--” means “not applicable”.
4) Calculated result as the worst point shown on underline :
Factor + Reading (AVE) = 11.1 + 56.1 = 67.2 dB(µV) at 13.5600 MHz
5) QP : Quasi-Peak detector, AVE : Average detector
6) Bandwidth : 9 kHz (150 kHz - 30 MHz)

Technical document No. 23199-1601

JQA File No. : KL80180553R Issue Date : March 5, 2019
Model No. : DS-10HR FCC ID : APY-BSC0003
Standard : CFR 47 FCC Rules and Regulations Part 15
Page 11 of 29

Test voltage : 120VAC 60Hz Test Date: December 4, 2018
Test condition : TX(the actual antenna connected) Temp.: 21 °C, RH: 67 %, Atm.: 1000 hPa
Measured phase : L2

Frequency Factor Readings Limits Results Margin Remarks
[dB(µV)] [dB(µV)] [dB(µV)] [dB]
[MHz] [dB] QP AVE QP AVE QP AVE QP AVE

0.1500 10.3 23.6 -- 66.0 56.0 33.9 -- + 32.1 -- -
0.2200 10.2 15.1 -- 62.8 52.8 25.3 -- + 37.5 -- -
0.4042 10.2 12.6 -- 57.8 47.8 22.8 -- + 35.0 -- -
0.5685 10.2 16.4 -- 56.0 46.0 26.6 -- + 29.4 -- -
0.6585 10.2 20.8 -- 56.0 46.0 31.0 -- + 25.0 -- -
13.5600 10.9 56.4 55.8 60.0 50.0 67.3 66.7 - 7.3 - 16.7 -
20.2700 11.3 15.0 -- 60.0 50.0 26.3 -- + 33.7 -- -

QP Limits AVE Limits QP AVE Maximum Sensitivity
80

70
Emission Level [dB(µV)]

60

50

40

30

20

10
0.15 0.3 1 3 10 30
Frequency [MHz]

NOTES
1) The spectrum was checked from 150 kHz to 30 MHz.
2) The factor includes the AMN voltage division factor and the cable loss.
3) The symbol of “--” means “not applicable”.
4) Calculated result as the worst point shown on underline :
Factor + Reading (AVE) = 10.9 + 55.8 = 66.7 dB(µV) at 13.5600 MHz
5) QP : Quasi-Peak detector, AVE : Average detector
6) Bandwidth : 9 kHz (150 kHz - 30 MHz)

Technical document No. 23199-1601

JQA File No. : KL80180553R Issue Date : March 5, 2019
Model No. : DS-10HR FCC ID : APY-BSC0003
Standard : CFR 47 FCC Rules and Regulations Part 15
Page 12 of 29

Fundamental Measurement

Test voltage : 120VAC 60Hz Test Date: December 4, 2018
Test condition : TX(a dummy load connected) Temp.: 21 °C, RH: 67 %, Atm.: 1000 hPa
Measured phase : L1

Frequency Factor Readings Limits Results Margin Remarks
[dB(µV)] [dB(µV)] [dB(µV)] [dB]
[MHz] [dB] QP AVE QP AVE QP AVE QP AVE

13.5600 11.1 < 10.0 -- 60.0 50.0 < 21.1 -- > + 38.9 -- -

QP Limits AVE Limits QP AVE Maximum Sensitivity
80

70
Emission Level [dB(µV)]

60

50

40

30

20

10
0.15 0.3 1 3 10 30
Frequency [MHz]

NOTES
1) The spectrum was checked from 150 kHz to 30 MHz.
2) QP : Quasi-Peak detector, AVE : Average detector
3) Bandwidth : 9 kHz (150 kHz - 30 MHz)
4) All emission levels were below the noise floor, or more than 15 dB below the applied limits.

Technical document No. 23199-1601

JQA File No. : KL80180553R Issue Date : March 5, 2019
Model No. : DS-10HR FCC ID : APY-BSC0003
Standard : CFR 47 FCC Rules and Regulations Part 15
Page 13 of 29

Test voltage : 120VAC 60Hz Test Date: December 4, 2018
Test condition : TX(a dummy load connected) Temp.: 21 °C, RH: 67 %, Atm.: 1000 hPa
Measured phase : L2

Frequency Factor Readings Limits Results Margin Remarks
[dB(µV)] [dB(µV)] [dB(µV)] [dB]
[MHz] [dB] QP AVE QP AVE QP AVE QP AVE

13.5600 11.1 < 10.0 -- 60.0 50.0 < 21.1 -- > + 38.9 -- -

QP Limits AVE Limits QP AVE Maximum Sensitivity
80

70
Emission Level [dB(µV)]

60

50

40

30

20

10
0.15 0.3 1 3 10 30
Frequency [MHz]

NOTES
1) The spectrum was checked from 150 kHz to 30 MHz.
2) QP : Quasi-Peak detector, AVE : Average detector
3) Bandwidth : 9 kHz (150 kHz - 30 MHz)
4) All emission levels were below the noise floor, or more than 15 dB below the applied limits.

Technical document No. 23199-1601

JQA File No. : KL80180553R Issue Date : March 5, 2019
Model No. : DS-10HR FCC ID : APY-BSC0003
Standard : CFR 47 FCC Rules and Regulations Part 15
Page 14 of 29

7.2 Radiated Emission

For the requirements, - Applicable [ - Tested. - Not tested by applicant request. ]
- Not Applicable

7.2.1 Test Results

7.2.1.1 Radiated Emission (§15.225(a)(b)(c))

For the standard, - Passed - Failed - Not judged

Min. Limit Margin (§15.225(a)) (Quasi-Peak) 71.7 dB at 13.560 MHz
Min. Limit Margin (§15.225(b)) (Quasi-Peak) 52.0 dB at 13.567 MHz
Min. Limit Margin (§15.225(c)) (Quasi-Peak) >51.4 dB at 13.41/13.71 MHz

Uncertainty of Measurement Results 9 kHz – 30 MHz ± 3.0 dB(2σ)

Remarks : The Radited Emission at 30m of 13.560 MHz is 12.3 dB(uV/m). Y axis position. Antenna
Orientation: parallel. The emission mask (§15.225(a), (b) and (c)) complies with the
limits.

7.2.1.2 Radiated Emission (§15.225(d))

For the standard, - Passed - Failed - Not judged

Min. Limit Margin (Quasi-Peak) 5.7 dB at 41.34 MHz

Uncertainty of Measurement Results 9 kHz – 30 MHz ± 3.0 dB(2σ)
30 MHz – 200 MHz ± 3.6 dB(2σ)
200 MHz – 1000 MHz ± 5.2 dB(2σ)

Remarks : X axis position.

Technical document No. 23199-1601

JQA File No. : KL80180553R Issue Date : March 5, 2019
Model No. : DS-10HR FCC ID : APY-BSC0003
Standard : CFR 47 FCC Rules and Regulations Part 15
Page 16 of 29

7.2.3.2 Radiated Emission 30 MHz – 1000 MHz

The preliminary tests were performed at the measurement distance that specified for compliance
to determine the emission characteristics of the EUT.
The EUT configuration(in X, Y and Z axis), cable configuration and mode of operation were
determined for producing the maximum level of emissions.
This configurations was used for the final tests.

– Side View –

Technical document No. 23199-1601

JQA File No. : KL80180553R Issue Date : March 5, 2019
Model No. : DS-10HR FCC ID : APY-BSC0003
Standard : CFR 47 FCC Rules and Regulations Part 15
Page 17 of 29

7.2.4 Test Data

7.2.4.1 Radiated Emission (§15.225(a)(b)(c) & §15.209(a))

Test Date: November 29, 2018
Test condition : TX:Battery Operation(worst case) Temp.: 19 °C, Humi: 53 %

Frequency Correction Meter Readings Limits Specified Extrapolated Margin Remarks
Factor at 3 m Distance Results [dB]
[MHz] [dB(1/m)] [dB(µV)] [dB(µV/m)] [m] [dB(µV/m)]

13.410 19.1 < 10.0 40.5 30.0 < -10.9 > +51.4 -
13.553 19.1 18.1 50.5 30.0 - 2.8 +53.3 -
13.560 19.1 33.2 84.0 30.0 12.3 +71.7 -
13.567 19.1 19.4 50.5 30.0 - 1.5 +52.0 -
13.710 19.1 < 10.0 40.5 30.0 < -10.9 > +51.4 -
27.120 20.2 < 10.0 29.5 30.0 < - 9.8 > +39.3 -

Limits
60
50
○ Quasi-Peak
40
Emission Level [dB(µV)]

30
20
10
0
-10
-20
-30
-40
Measurement Sensitivity
-50
0.01 0.03 0.1 0.3 1 3 10 30
Frequency [MHz]
NOTES
1. Test Distance : 3 m
2. The spectrum was checked from 9 kHz to 30 MHz.
3. The correction factor includes the antenna factor and the cable loss.
4. The symbol of “<” means “or less”.
5. The symbol of “>” means “more than”.
6. The testing loop antenna was rotated at the vertical and horizontal axis to maximize received emissions.
The above Meter Reading was maximum emission level.
7. Calculation:
For fundamental, the measured field strength was extrapolated to distance 30m, using the formula that field strength
using the formula that field strength aries as the inverse distance square(40 dB per decade of distance).
Fundamental : Correction Factor + Meter Reading = 19.1 + 33.2 = 52.3 dB(µV/m)
Result at 30 m = -40 + 52.3 = 12.3 dB(µV/m) (Conversion Factor : 40dB/decade)
Limits for 13.553-13.567MHz(§15.225(a)) = 20log10(15848) = 84.0 dBµV/m
Limits for 13.410-13.553,13.567-13.710MHz(§15.225(b)) = 20log10(334) = 50.5 dBµV/m
Limits for 13.110-13.410,13.710-14.010MHz (§15.225(c)) = 20log10(106) = 40.5 dBµV/m
Harmonics : Correction Factor + Meter Reading = 20.2 + <10.0 = <30.2 dB(µV/m)
Result at 30 m = -40 + <30.2 = <-9.8 dB(µV/m) (Conversion Factor : 40dB/decade)
Limits for Harmonics(§15.209(a)) = 20log10(30) = 29.5 dBµV/m
7. Test receiver setting(s) :
Quasi-Peak Detector IF Bandwidth: 9kHz or 200Hz(Except for 9 kHz -90 kHz, 110 kHz -490 kHz)
Average Detector, IF Bandwidth: 9kHz or 200Hz(9 kHz -90 kHz, 110 kHz -490 kHz)

Technical document No. 23199-1601

JQA File No. : KL80180553R Issue Date : March 5, 2019
Model No. : DS-10HR FCC ID : APY-BSC0003
Standard : CFR 47 FCC Rules and Regulations Part 15
Page 19 of 29

7.2.4.2 Radiated Emission (§15.209(a))( 30MHz – 1000MHz)

Test voltage : 120VAC 60Hz Test Date: December 4, 2018
Test condition : TX: USB Bus Power Operation (worst case) Temp.: 21 °C, RH: 67 %, Atm.: 1000 hPa
Antenna polarization : Horizontal

Frequency Factor Readings Limits Results Margin Remarks

[MHz] [dB] [dB(µV)] [dB(µV/m)] [dB(µV/m)] [dB]

41.340 15.6 4.3 40.0 19.9 + 20.1 -
79.688 7.6 16.2 40.0 23.8 + 16.2 -
101.973 12.1 14.0 43.5 26.1 + 17.4 -
271.200 15.1 10.5 46.0 25.6 + 20.4 -
298.320 15.8 10.7 46.0 26.5 + 19.5 -
325.440 16.7 11.5 46.0 28.2 + 17.8 -

Limits QP Maximum Sensitivity
60

50
Emission Level [dB(µV/m)]

40

30

20

10

0
30 50 100 300 500 1000
Frequency [MHz]

NOTES
1) Measurement Distance : 3 m
2) The spectrum was checked from 30 MHz to 1000 MHz.
3) The factor includes the antenna factor and the cable loss.
4) Calculated result as the worst point shown on underline :
Factor + Reading (QP) = 7.6 + 16.2 = 23.8 dB(µV) at 79.688 MHz
Antenna Height : 228 cm, Turntable Rotation Position : 64 °
5) QP : Quasi-Peak detector
6) Bandwidth : 120 kHz (30 MHz - 1000 MHz)

Technical document No. 23199-1601

JQA File No. : KL80180553R Issue Date : March 5, 2019
Model No. : DS-10HR FCC ID : APY-BSC0003
Standard : CFR 47 FCC Rules and Regulations Part 15
Page 20 of 29

Test voltage : 120VAC 60Hz Test Date: December 4, 2018
Test condition : TX: USB Bus Power Operation (worst case) Temp.: 21 °C, RH: 67 %, Atm.: 1000 hPa
Antenna polarization : Vertical

Frequency Factor Readings Limits Results Margin Remarks

[MHz] [dB] [dB(µV)] [dB(µV/m)] [dB(µV/m)] [dB]

41.340 15.6 18.7 40.0 34.3 + 5.7 -
79.688 7.6 13.7 40.0 21.3 + 18.7 -
115.848 14.5 10.5 43.5 25.0 + 18.5 -
271.200 15.1 4.5 46.0 19.6 + 26.4 -
325.440 16.7 5.1 46.0 21.8 + 24.2 -

Limits QP Maximum Sensitivity
60

50
Emission Level [dB(µV/m)]

40

30

20

10

0
30 50 100 300 500 1000
Frequency [MHz]

NOTES
1) Measurement Distance : 3 m
2) The spectrum was checked from 30 MHz to 1000 MHz.
3) The factor includes the antenna factor and the cable loss.
4) Calculated result as the worst point shown on underline :
Factor + Reading (QP) = 15.6 + 18.7 = 34.3 dB(µV) at 41.340 MHz
Antenna Height : 100 cm, Turntable Rotation Position : 113 °
5) QP : Quasi-Peak detector
6) Bandwidth : 120 kHz (30 MHz - 1000 MHz)

Technical document No. 23199-1601

JQA File No. : KL80180553R Issue Date : March 5, 2019
Model No. : DS-10HR FCC ID : APY-BSC0003
Standard : CFR 47 FCC Rules and Regulations Part 15
Page 24 of 29

7.4.3 Test Method and Test Setup (Diagrammatic illustration)

Frequency Stability versus Temperature

The EUT was placed in an environmental chamber and was tested in the range from –20 to +50
degrees Celsius. The EUT was stabilized at each temperature. The power supplied was applied to
the transmitter and allowed to stabilize for 10 minutes. The transmitting frequency was measured
at startup and 2 minutes, 5 minutes and 10 minutes after startup. This procedure was repeated
from –20, +20 and +50 degrees Celsius.

Environmental Chamber

Loop
EUT Antenna

Spectrum
Analyzer

Regulated DC Voltage
AC Voltage
Power Meter
Meter
Supply

Technical document No. 23199-1601

JQA File No. : KL80180553R Issue Date : March 5, 2019
Model No. : DS-10HR FCC ID : APY-BSC0003
Standard : CFR 47 FCC Rules and Regulations Part 15
Page 25 of 29

7.4.4 Test Data

Test condition: TX: USB Bus Power Operation (worst case)

Test Date: December 5, 2018

Transmitting Frequency : 13.560 MHz
AC Supply Voltage : 120 VAC

Power Ambient Frequency with time elapse[MHz]
Supply Temperature Startup 2 minutes 5 minutes 10 minutes
[VAC] [°C]

120 -20 13.560130 13.560149 13.560175 13.560180
102 20 13.560207 13.560199 13.560196 13.560195
120 20 13.560205 13.560199 13.560196 13.560194
138 20 13.560207 13.560199 13.560196 13.560195
120 50 13.560163 13.560163 13.560163 13.560163

Power Ambient Diviation with time elapse[%] Limits Margin
Supply Temperature Startup 2 minutes 5 minutes 10 minutes [%] [%]
[VAC] [°C]

120 -20 + 0.000959 + 0.001099 + 0.001291 + 0.001327 0.01 + 0.008673
102 20 + 0.001527 + 0.001468 + 0.001445 + 0.001438 0.01 + 0.008473
120 20 + 0.001512 + 0.001468 + 0.001445 + 0.001431 0.01 + 0.008488
138 20 + 0.001527 + 0.001468 + 0.001445 + 0.001438 0.01 + 0.008473
120 50 + 0.001202 + 0.001202 + 0.001202 + 0.001202 0.01 + 0.008798

Sample of calculated result at 13.560 MHz, as the Minimum Margin point:
Ambient Temperature : 20 °C / Startup
AC Supply Voltage 102/138 VAC

Minimum Margin: 0.010000 - 0.001527 = 0.008473 (% )
The point shown on “ ” is the Minimum Margin Point. The Maximum Deviation Point is shown on a thick letter.

Note: The measurement were made after all of components of the oscillator sufficiently stabilized at each
temperature.

Technical document No. 23199-1601

Document Created: 2019-03-05 16:19:15
Document Modified: 2019-03-05 16:19:15

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC