APV-3240LA

FCC ID

Equipment: HotSpot OBD Dongle

CalAmp -3240LA

2177 Salk Ave Suite 200, Carlsbad, CA 92008 United States

Application
Frequency Range
Final Action Date
Granted
C/JuPHTlvIVwk9q2Ro1uzQ==
699.7-715.3
2019-08-13
APPROVED
C/JuPHTlvIVwk9q2Ro1uzQ==
704.0-711.0
2019-08-13
APPROVED
C/JuPHTlvIVwk9q2Ro1uzQ==
825.5-847.5
2019-08-13
APPROVED
C/JuPHTlvIVwk9q2Ro1uzQ==
826.4-846.6
2019-08-13
APPROVED
C/JuPHTlvIVwk9q2Ro1uzQ==
829.0-844.0
2019-08-13
APPROVED
C/JuPHTlvIVwk9q2Ro1uzQ==
1710.7-1754.3
2019-08-13
APPROVED
C/JuPHTlvIVwk9q2Ro1uzQ==
1720.0-1745.0
2019-08-13
APPROVED
C/JuPHTlvIVwk9q2Ro1uzQ==
1850.7-1909.3
2019-08-13
APPROVED
C/JuPHTlvIVwk9q2Ro1uzQ==
1852.4-1907.6
2019-08-13
APPROVED
C/JuPHTlvIVwk9q2Ro1uzQ==
1860.0-1900.0
2019-08-13
APPROVED
sUObpiAVimT4qUUNvJVGJw==
5745.0-5825.0
2019-08-13
APPROVED
/UFs9GVmG7GarY+ZsHxhFg==
2402.0-2480.0
2019-08-13
APPROVED
/UFs9GVmG7GarY+ZsHxhFg==
2412.0-2462.0
2019-08-13
APPROVED
uEVf0qD7akxPV7eYQ++1eg==
2402.0-2480.0
2019-08-13
APPROVED
File NameDocument TypeDateDirect
Test Report PCBTest Report 2019-08-13 00:00:00 pdf
Test Report PCB Part 27Test Report 2019-08-13 00:00:00 pdf
Test Report PCB Part 24Test Report 2019-08-13 00:00:00 pdf
Test Report PCB Part 22Test Report 2019-08-13 00:00:00 pdf
RF Exposure InfoRF Exposure Info 2019-08-13 00:00:00 pdf
ID Label/Location InfoID Label/Location Info 2019-08-13 00:00:00 pdf
ID LabelID Label/Location Info 2019-08-13 00:00:00 pdf
FCC Agent Authorization LetterCover Letter(s) 2019-08-13 00:00:00 pdf
FCC Confidentiality LetterCover Letter(s) 2019-08-13 00:00:00 pdf
Test report attestation letterAttestation Statements 2019-08-13 00:00:00 pdf
NII Test ReportTest Report 2019-08-13 00:00:00 pdf
ID Label/Location infoID Label/Location Info 2019-08-13 00:00:00 pdf
Test ReportTest Report 2019-08-13 00:00:00 pdf
Block DiagramBlock Diagram N/A
External PhotosExternal Photos 2020-02-09 00:00:00 N/A
Internal PhotosInternal Photos 2020-02-09 00:00:00 N/A
Operational DescriptionOperational Description N/A
SchematicsSchematics N/A
Test Setup PhotosTest Setup Photos 2020-02-09 00:00:00 N/A
User ManualUsers Manual 2020-02-09 00:00:00 N/A
Parts List/Tune Up InfoParts List/Tune Up Info N/A
Test Setup PhotoTest Setup Photos 2020-02-09 00:00:00 N/A
User manualUsers Manual 2020-02-09 00:00:00 N/A

Application Details:

EquipmentHotSpot OBD Dongle
FRN0019077858
Grantee CodeAPV
Product Code-3240LA
Applicant BusinessCalAmp
Business Address2177 Salk Ave Suite 200, Carlsbad,California United States 92008
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantImad Rizk – Carrier & Product Certifications Manager
Applicant Phone
Applicant Fax760-438-5835
Applicant Email[email protected]
Applicant MailStop
Test FirmVista Laboratories, Inc.
Test Firm ContactDavid Zhang
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByImad Rizk – Sr. Manager Certification
Comment [/UFs9GVmG7GarY+ZsHxhFg==]: Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. The WLAN of this device has 20 MHz and 40MHz bandwidth mode.
Comment [C/JuPHTlvIVwk9q2Ro1uzQ==]: Output Power is EIRP and ERP for above and below 1 GHz, respectively. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Bands 5 and 12.
Comment [sUObpiAVimT4qUUNvJVGJw==]: Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. The WLAN of this device has 20 MHz and 40MHz bandwidth mode.
Comment [uEVf0qD7akxPV7eYQ++1eg==]: Output power listed is conducted.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC