MPE Report

FCC ID: AK8WIXB400

RF Exposure Info

Download: PDF
FCCID_4251269

KDB 447498 D01 General RF Exposure Guidance v06
INDUSTRY CANADA RSS-102 Issue 5

In re : Sony Corporation
FCC ID : AK8WIXB400
Certification Number IC : 409B-WIXB400

Conducted Output Power
                                                     Mode
    Frequency
                     Channel No.            GFSK              8-DPSK
      (MHz)
                                               Output Power(dBm)
       2402               0                 0.992              3.773
       2441               39                0.215              2.956
       2480               78                0.460              3.195

RF Exposure Evaluation
 Frequency range     Antenna Gain    Conducted Output            EIRP
      (MHz)              (dBi)         Power (dBm)              (mW)
   2402 - 2480            -1.6              3.773               1.649



4.3.1. Standalone SAR test exclusion considerations
                 100 MHz to 6 GHz at separation distance less than or equal to 50 mm


SAR Test Exclusion Calculator
Insert values in yellow highlighted boxes to determine SAR Exclusion
Max Power                      1.649 mW
Min Separation                     5 mm                  When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to
Frequency                        2.4 GHz                 determine SAR test exclusion.


Answer                           0.5 Must be less than or equal to 3.0 for SAR Exclusion


                                    KDB 628591 D01 TCB Exclusion List v16
                                    TCBs are excluded from granting if:
                                    General Population: The Answer is equal to or greater than 24 (8x threshold)
                                    Controlled Use: The Answer is equal to or greater than 60 (20x threshold)
                                    and, when published RF exposure KDB procedures are not established for SAR testing or when SAR data is not
                                    provided to support compliance.

Please also note the following: [FCC KDB quote] These test exclusion conditions are based on source-based time-averaged maximum conducted
output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the
exposure conditions. The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer
surface. [End quote]



Document Created: 2019-03-27 13:37:20
Document Modified: 2019-03-27 13:37:20

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC