WI-C200-FCC RF exposure statement

FCC ID: AK8WIC200

Cover Letter(s)

Download: PDF
FCCID_4147133

Product Name:Sony Corporation


Model Number: WI‐C200

FCC ID: AK8WIC200


RADIO FRREQUENCY EXPOSURE COMPLIANCE RESULT :

Test Standard : FCC KDB Publication 447498 D01 V06 Clause 4.3.1,
The 1‐g and 10‐g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances
≤ 50 mm are determined by:

[(max. power of channel, including tune‐up tolerance, mW)/(min. test separation distance, mm)] ∙
[√f(GHz)] ≤ 3.0 for 1‐g SAR and ≤ 7.5 for 10‐g extremity SAR, where
• f(GHz) is the RF channel transmit frequency in GHz
• Power and distance are rounded to the nearest mW and mm before calculation
• The result is rounded to one decimal place for comparison
• 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below
The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm
and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test
separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to
determine SAR test exclusion.


According to the actual measurement,
max. power of channel, including tune‐up tolerance =1.9888mW
min. test separation distance= 5mm
√f(GHz)=1.55

The test result is 0.616528≤3.0 for 1‐g SAR≤ 7.5 for 10‐g SAR, hence the EUT is excluded from SAR
evaluation according to FCC KDB Publication 447498 D01: General RF Exposure Guidance V06.



Document Created: 2019-01-16 14:16:20
Document Modified: 2019-01-16 14:16:20

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC