03 FCC RF Exposure_DSS

FCC ID: AK8PCMD10

RF Exposure Info

Download: PDF
FCCID_4052249

Sony Global Manufacturing & Operations Corporation EMC/RF Test Laboratory, Main Lab.
Kisarazu Site 8-4 Shiomi Kisarazu-shi, Chiba, 292-0834 Japan



                                                                                  Date: October 09, 2018
FCC ID :         AK8PCMD10
Applicant :      Sony Corporation

                                        SAR Evaluation Exemption

To whom it may concern,

We, Sony Global Manufacturing & Operations Corporation EMC/RF Test Laboratory, Main
Lab., hereby declare that Linear PCM Recorder, model: PCM-D10 (FCC ID: AK8PCMD10)
of Sony Corporation is exempt from RF exposure SAR evaluation, as its output power
meets the exclusion limits, stated in FCC Part 2 §2.1093.

According to KDB 447498 D01 (v06), section 4.3.1:
  … These test exclusion conditions are based on source-based time-averaged (i.e. frame averaged)
  maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up
  tolerance, and the minimum test separation distance required for the exposure conditions.
  … The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances
  ≤ 50 mm are determined by:
    [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] •
    [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where
      • f(GHz) is the RF channel transmit frequency in GHz
      • Power and distance are rounded to the nearest mW and mm before calculation
      • The result is rounded to one decimal place for comparison
  The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and
  for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation
  distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion.

For above device,
Regarding Bluetooth BR/EDR;
   f = 2.48 GHz, distance = 5mm (the min. separation distance is < 5 mm),
   the max. possible duty cycle = 83.3% = -0.79 dB,
     (* xDH5: 83.3% = (On time; 625 μs * 5 slots) / (On time + Off time; 625 μs * 6 slots) )
   the max. possible burst averaged power incl. tune-up tolerance = 6.00 dBm, and
   the max. possible frame averaged power incl. tune-up tolerance = 6.00 + (-0.79) = 5.21 dBm ≈ 3 mW.
Therefore,
        3 mW / 5 mm * ( √ 2.48 GHz) = 0.9 < 3.0
and no SAR evaluation is required.

Thank you for your attention to this matter.

Sincerely,




Teruki Kurihara
Technical Manager
EMC/ RF Test Laboratory Main Lab.
Design Technology Division
Sony Global Manufacturing & Operations Corporation



Document Created: 2018-10-23 13:37:22
Document Modified: 2018-10-23 13:37:22

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC