RF Exposure Info

FCC ID: AK8DSXB700W

RF Exposure Info

Download: PDF
FCCID_4247637

                            74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Korea
                            TEL: +82-31-645-6300 FAX: +82-31-645-6401


                            SAR EXCLUSION REPORT

 Applicant Name:                                                                    Date of Issue: 04. 08, 2019
 SONY CORPORATION                                                                   Test Report No: HCT-SR-1904-FI001
 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan                                        Test Site: HCT CO., LTD.




 FCC ID:                                                            AK8DSXB700W
 ISED ID:                                                          409B-DSXB700W


 Model Name :                  DSX-B700W


 Equipment Type:               FM/AM Bluetooth® CAR AUDIO
 FCC Rule Part(s):             47CFR §2.1093
 ISED Rule Part(s):            RSS-102 Issue 5; Health Canada Safety Code 6
 Application Type              Certification




  Device Wireless specification overview
  Band & Mode                    Operating Mode                                                   Tx Frequency
  Bluetooth 3.0                  Data                                                             2 402 – 2 480 MHz
Maximum Output Power : 4 dBm (2.5 mW)


This device has been excluded from SAR measurements based on FCC FDB KDB 447498 D01 v06
and ISED RSS102 Issue 5..



 Reviewed By




 Yun-jeang, Heo
 Technical Manager / SAR Team
 Certification Division

 This report only responds to the tested sample and may not be reproduced, except in full, without written approval of the HCT Co., Ltd.



F-TP22-03 (Rev.00)                                                                                                     HCT CO., LTD.


    1. SAR Test Exclusions Applied _Bluetooth For FCC
According to the FCC KDB 447498 D01 v06 section 4.3.1, for 100 MHz to 6 GHz and test separation
distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following:

                        π‘€π‘Žπ‘₯ π‘ƒπ‘œπ‘€π‘’π‘Ÿ π‘œπ‘“ πΆβ„Žπ‘Žπ‘›π‘›π‘’π‘™(π‘šπ‘Š)
                      :π‘‡π‘’π‘ π‘‘π‘†π‘’π‘π‘Žπ‘Ÿπ‘Žπ‘‘π‘–π‘œπ‘› π·π‘–π‘ π‘‘π‘Žπ‘›π‘π‘’ (π‘šπ‘š)
                                                      ∗ √πΉπ‘Ÿπ‘’π‘žπ‘’π‘’π‘›π‘π‘¦(𝐺𝐻𝑧) ≤ 3.0 for 1 − g SAR

where
- f(GHz) is the RF channel transmit frequency in GHz
- Power and distance are rounded to the nearest mW and mm before calculation
- The result is rounded to one decimal place for comparison

Calculation Result:
Tx frequency range: 2 402 MHz~ 2 480 MHz
Min. test separation distance: 5 mm
Maximum Output Power: 0.324 dBm (1.077 mW)
The Highest RF channel frequency: 2 480 MHz

                         Frequency       Maximum Allowed Power          Separation Distance
         Mode                                                                                 ≤ 3.0 for 1g SAR
                           [MHz]                [mW]                           [mm]
        Bluetooth          2 480                2.5                              5                0.787401
Based on the maximum output power of Bluetooth and antenna to use separation distance, Bluetooth SAR
was not required [(2.5/5)*√2.480] = 0.787401 < 3.0.



    2. SAR Test Exclusions Applied _Bluetooth For ISED
Per RSS102 Issue 5, 2.5.1 Exemption Limits for Routine Evaluation

                                                           .




The SAR exemption from RSS102: Issue 5 was also exempted by the above exclusion conditions.



Document Created: 2019-04-12 16:51:01
Document Modified: 2019-04-12 16:51:01

Β© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC