06 Label and Location

FCC ID: AK8DMPZ1

ID Label/Location Info

Download: PDF
FCCID_4022517


DMP-Z1(UC7) Top side of the product Screen display Setting ->Certificates

4-740-663-21(1) 12) Use only with the cart, stand, tripod, bracket, or table specified by Troubleshooting To reduce the risk of fire or electric shock, do not expose AC Adaptor to the manufacturer, or sold with the apparatus. When a cart is used, The player is not recognized by your computer. dripping or splashing, and do not place objects filled with liquids, such use caution when moving the cart/apparatus combination to avoid • The battery may be depleted. Charge the battery using the AC as vases, on the appliance. injury from tip-over. Adaptor (supplied). Important information concerning safety is located on the bottom • Complete the initial setup of the player before connecting it to your exterior of main unit. computer. • The USB Type-C cable (supplied) is not connected to a USB connector For customers in the U.S.A. and Canada Digital Music Instruction Manual GB 13) Unplug this apparatus during lightning storms or when unused for long periods of time. on your computer properly. Disconnect the USB Type-C cable, and then reconnect it. Authentication information based on laws and regulations is displayed on this product’s screen electronically. Follow the steps below to Player Manuel d’instructions FR 14) Refer all servicing to qualified service personnel. Servicing is required • If the approaches listed above fail to resolve the issue, turn off your computer completely and disconnect the player. Then disconnect the display this information. when the apparatus has been damaged in any way, such as power- Tap –[ Settings] – [Certificates]. supply cord or plug is damaged, liquid has been spilled or objects power cable, battery, and anything else connected to the computer Lecteur de have fallen into the apparatus, the apparatus has been exposed to and discharge it for five minutes. After discharging, turn on the computer again and reconnect the player. The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European musique numérique rain or moisture, does not operate normally, or has been dropped. Economic Area). About the manuals Compliance & Information Design and specifications are subject to change without notice. 1. Instruction Manual (this manual) 2. Information on laws and trademarks (Startup Guide) • For information on laws, regulations, and trademark rights, refer to The Startup Guide describes the following: “Important Information” in the internal memory of your unit. To read • Basic operating instructions of your Digital Music Player*1 it, open the following folders in the system storage after you connect • How to access useful PC applications websites on the internet the unit to your computer. 3. Help Guide (web document for a PC/smartphone) [PLAYER] - [Information_HelpGuide] - [Important_Information] The Help Guide contains more detailed operating After you double-click the [index.html] file, select a language. instructions, specifications and customer support • The N-Mark is a trademark or registered trademark of NFC Forum, Inc. website URL, etc. in the United States and in other countries. http://rd1.sony.net/help/dmp/dmpz1/h_ww/ While browsing is free, you may be charged a communication fee according to your carrier contract. *1 The “Digital Music Player” is referred to as “player” in this manual. About the in-ear headphones • When you use in-ear headphones with a high degree of adhesion, Depending on the country/region in which you have purchased your note the following. Otherwise, you may damage your ears or player, some models may not be available. eardrums. –– Do not insert the earbuds forcefully into your ears. ©2018 Sony Corporation   Printed in Malaysia / Imprimé en Malaisie Notes for using the player –– Do not remove the earbuds from your ears suddenly. When you take off the headphones, move the earbuds up and down gently. Note for battery Rated current consumption 2.35 A DMP-Z1 • To prevent deterioration of the battery, charge the battery at least once every 6 months. About the headphones • Avoid playing the unit at so loud a volume that extended play might Formatting a microSD card affect your hearing. English Be sure to read the instructions for microSD cards in the Help Guide on • At a high volume outside sounds may become inaudible. Avoid the Internet before you store content on a microSD card (not supplied). listening to the unit in situations where hearing must not be WARNING BLUETOOTH® capabilities impaired, for example, while driving or cycling. To reduce the risk of fire or electric shock, do not expose this You can listen to music stored on your player from Bluetooth audio • As the headphones are of open-air design, sounds go out through apparatus to rain or moisture. devices such as headphones or speakers. You can also listen to music the headphones. Remember not to disturb those close to you. stored on your smartphone or computer through the player. Refer to L/R Channels You are cautioned that any changes or modifications not expressly the “Help Guide” for details on using the Bluetooth function. approved in this manual could void your authority to operate this POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 16 ohm equipment. Pairing (first time the device is used) loads, both channels driven, from 20 Hz – 20,000 Hz ; rated 1,250 When you connect Bluetooth audio devices wirelessly for the first time, milliwatts per channel minimum RMS power at stereo mode, with no The AC Adaptor is not disconnected from the mains as long as it is the devices must be registered to each other. This registration is called more than 0.05 % total harmonic distortion from 250 milliwatts to rated connected to the AC outlet, even if the unit itself has been turned off. “pairing.” output. Do not install the appliance in a confined space, such as a bookcase or 1. Set the Bluetooth audio device to pairing mode. (Refer to the Owner’s Record built-in cabinet. device’s instruction manual.) The model and serial numbers are located on the bottom of the player. 2. Tap –[ Settings] – [Connect to/Add Audio Device] under Record them in the space provided below. Refer to these numbers in Do not expose the batteries (battery pack or batteries installed) to [Bluetooth]. the spaces whenever you call upon your Sony dealer regarding this excessive heat such as sunshine, fire or the like for a long time. 3. Tap the Bluetooth switch ( ) to turn on the Bluetooth function. product. Important Safety Instructions 4. Tap [Add Device (Pairing)] to start pairing. Model No.________________________ 1) Read these instructions. 5. Select the device from the paired device list to make the Bluetooth Serial No._________________________ 2) Keep these instructions. connection. After the Bluetooth connection is established, [Connected] is • Do not expose the batteries (battery pack or batteries installed) to 3) Heed all warnings. displayed. excessive heat such as sunshine, fire or the like for a long time. 4) Follow all instructions. Connecting (subsequent uses) • Do not subject the batteries to extreme low temperature conditions 5) Do not use this apparatus near water. 1. Turn on the paired Bluetooth audio device and set it to standby. that may result in overheating and thermal runaway. 6) Clean only with dry cloth. 2. Tap –[ Settings] – [Connect to/Add Audio Device] under • Do not dismantle, open or shred secondary cells or batteries. 7) Do not block any ventilation openings. Install in accordance with the [Bluetooth]. • In the event of a cell leaking, do not allow the liquid to come in manufacturer’s instructions. 3. Tap the Bluetooth switch ( ) to turn on the Bluetooth function. contact with the skin or eyes. If contact has been made, wash the 8) Do not install near any heat sources such as radiators, heat registers, 4. Select the device from the paired device list to make the Bluetooth affected area with copious amounts of water and seek medical stoves, or other apparatus (including amplifiers) that produce heat. connection. advice. 9) Do not defeat the safety purpose of the polarized or grounding-type Disconnecting • Do not use any charger other than that specifically provided for use plug. A polarized plug has two blades with one wider than the other. with the equipment. A grounding type plug has two blades and a third grounding prong. 1. Tap –[ Settings] – [Connect to/Add Audio Device] under • Secondary cells and batteries need to be charged before use. Always The wide blade or the third prong are provided for your safety. If the [Bluetooth]. use the correct charger and refer to the manufacturer’s instructions provided plug does not fit into your outlet, consult an electrician for 2. Tap the connecting device name on the paired device list, and tap or equipment manual for proper charging instructions. replacement of the obsolete outlet. [OK] on the disconnection dialog. • After extended periods of storage, it may be necessary to charge 10) Protect the power cord from being walked on or pinched particularly Note and discharge the cells or batteries several times to obtain maximum at plugs, convenience receptacles, and the point where they exit • Pairing information is deleted in the following situations. Pair the devices again. performance. from the apparatus. –– One or both of the devices are reset to the factory settings. –– Pairing information is deleted from the devices, such as when the devices are • Dispose of properly. 11) Only use attachments/accessories specified by the manufacturer. repaired. DMP-Z1 4-740-663-21(1)


Document Created: 2018-09-27 13:59:51
Document Modified: 2018-09-27 13:59:51
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC