Declaration of authorization

FCC ID: AK8DHURSY63

Cover Letter(s)

Download: PDF
FCCID_4370939

Date : July 25, 2019
                                                         UNII Declaration Letter

We have declared below featured for FCC equipment authorization, Device FCC ID: AK8DHURSY63

    (1) DFS Device --          Client with Radar detection capability ,
                               Client without radar detection capability

    (2) Active / Passive Scanning , Ad hoc mode access point capability
          Frequency Band            Active Scanning      passive scanning                           Ad Hoc Mode              Access point
                (MHz)               (the device can    (where the device is                          capability               capability
                                   transmit a probe     can listen only with
                                       (beacon))            no probes)
             5150 – 5250                Yes ,    No            Yes ,   No                              Yes ,      No            Yes ,      No
             5250 – 5350                Yes ,    No            Yes ,   No                              Yes ,      No            Yes ,      No
             5470 – 5725                Yes ,    No            Yes ,   No                              Yes ,      No            Yes ,      No
             5725 – 5850                Yes ,    No            Yes ,   No                              Yes ,      No            Yes ,      No

    (3) Country code selection ability -  Yes ,                 No
        If no, pls explain how was implemented :

    (4) Meet 15.202 requirement -         Yes ,   No ,
        pls check below :
        A client device is defined as a device operating in a mode in which the transmissions of the device are under control
        of the master. A device in client mode is not able to initiate a network.

    (5) For client devices that have software configuration control to operate in different modes (active scanning in some and
        passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-
        DFS frequencies) or modular devices which configure the modes of operations through software, the application must
        provide software and operations description on how the software and / or hardware is implemented to ensure that
        proper operations modes can not be modified by end user or an installer.
            Apply ,    No Apply ,
         (If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled)

         On DFS channels, the WLAN driver on the device operates under the control of an AP at all times, except when in ad-hoc mode, on US non-DFS
         channels. As described in the answer to question (2), the device passively scans DFS frequencies until a master device is detected. The control of
         this functionality is not accessible to anyone under any conditions. Furthermore, the firmware is locked by proprietary password and cannot be
         changed or modified by end user.



       Applicant                      : Sony Corporation

       Address                        : 1-7-1 Konan Minato-ku,Tokyo ,108-0075 Japan



       Signature                      :



       Name and Job Title.            : Ryo Takata / Senior Manager



Document Created: 2019-07-25 15:49:17
Document Modified: 2019-07-25 15:49:17

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC