DTS Test Report_BLE

FCC ID: AK8DHURSY63

Test Report

Download: PDF
FCCID_4370930

                             FCC Test Report
            FCC ID                 : AK8DHURSY63
            Equipment              : 802.11 abgn(ac)+ BT 4.2 combo module
            Model No.              : DHUR-SY63
            Brand Name             : Wistron NeWeb Corporation
            Applicant              : Sony Corporation
            Address                : 1-7-1 Konan Minato-ku,Tokyo ,108-0075 Japan
            Standard               : 47 CFR FCC Part 15.247
            Received Date          : May 13, 2019
            Tested Date            : May 17 ~ Jun. 28, 2019


      We, International Certification Corp., would like to declare that the tested sample has been
      evaluated and in compliance with the requirement of the above standards. The test results
      contained in this report refer exclusively to the product. It may be duplicated completely for
      legal use with the approval of the applicant. It shall not be reproduced except in full without
      the written approval of our laboratory.



      Reviewed by:                        Approved by:




      Along Chen / Assistant Manager      Gary Chang / Manager




Report No.: FR950701AE                                                                Page : 1 of 33
Report Version: Rev. 01


                                                         Table of Contents
1        GENERAL DESCRIPTION .................................................................................................................... 5

1.1      Information.............................................................................................................................................. 5
1.2      Local Support Equipment List ................................................................................................................ 6
1.3      Test Setup Chart .................................................................................................................................... 6
1.4      Test Equipment List and Calibration Data .............................................................................................. 7
1.5      Test Standards ....................................................................................................................................... 8
1.6      Deviation from Test Standard and Measurement Procedure ................................................................. 8
1.7      Measurement Uncertainty ...................................................................................................................... 8

2        TEST CONFIGURATION ....................................................................................................................... 9

2.1      Testing Condition ................................................................................................................................... 9
2.2      The Worst Test Modes and Channel Details ......................................................................................... 9

3        TRANSMITTER TEST RESULTS........................................................................................................10

3.1      Conducted Emissions ...........................................................................................................................10
3.2      6dB and Occupied Bandwidth ..............................................................................................................13
3.3      RF Output Power ..................................................................................................................................16
3.4      Power Spectral Density ........................................................................................................................18
3.5      Emissions in Restricted Frequency Bands ...........................................................................................21
3.6      Emissions in non-restricted Frequency Bands .....................................................................................31

4        TEST LABORATORY INFORMATION ...............................................................................................33




Report No.: FR950701AE                                                                                                              Page : 2 of 33
Report Version: Rev. 01


                                    Release Record
     Report No.           Version                   Description      Issued Date
    FR950701AE            Rev. 01   Initial issue                    Jul. 22, 2019




Report No.: FR950701AE                                            Page : 3 of 33
Report Version: Rev. 01


                                  Summary of Test Results

   FCC Rules                     Test Items                           Measured                       Result
                                                         [dBuV]: 0.153MHz
      15.207         AC Power Line Conducted Emissions                                                Pass
                                                         51.16 (Margin -14.66dB) - QP
    15.247(d)                                            [dBuV/m at 3m]: 360.77MHz
                     Radiated Emissions                                                               Pass
      15.209                                             36.11 (Margin -9.89dB) - QP

   15.247(b)(3)      Maximum Output Power                Power [dBm]: 6.29                            Pass
   15.247(a)(2)      6dB Bandwidth                       Meet the requirement of limit                Pass
    15.247(e)        Power Spectral Density              Meet the requirement of limit                Pass
      15.203         Antenna Requirement                 Meet the requirement of limit                Pass


Declaration of Conformity:
The test results with all measurement uncertainty excluded are presented in accordance with the regulation
limits or requirements declared by manufacturers.
Comments and Explanations:
The declared of product specification for EUT presented in the report are provided by the manufacturer, and
the manufacturer takes all the responsibilities for the accuracy of product specification.




Report No.: FR950701AE                                                                   Page : 4 of 33
Report Version: Rev. 01


1           General Description
1.1         Information
1.1.1       Specification of the Equipment under Test (EUT)
                                                RF General Information
 Frequency Range                    Bluetooth
                                                    Ch. Freq. (MHz)      Channel Number              Data Rate
      (MHz)                           Mode
      2400-2483.5                    V4.2 LE           2402-2480            0-39 [40]                  1 Mbps
Note 1: Bluetooth LE (Low energy) uses GFSK modulation.


1.1.2       Antenna Details
 Ant. No.                 Type                  Connector               Gain (dBi)                  Remarks
      1                   printed                   NA                    -3.59                         ---


1.1.3       Power Supply Type of Equipment under Test (EUT)
Power Supply Type                       3.3Vdc from host


1.1.4       Accessories
N/A


1.1.5       Channel List
                  Frequency band (MHz)                                            2400~2483.5
                 Frequency                      Frequency                 Frequency                      Frequency
    Channel                          Channel                 Channel                     Channel
                   (MHz)                          (MHz)                     (MHz)                          (MHz)
      37             2402                9         2422            18        2442           28                2462
        0            2404               10         2424            19        2444           29                2464
        1            2406               38         2426            20        2446           30                2466
        2            2408               11         2428            21        2448           31                2468
        3            2410               12         2430            22        2450           32                2470
        4            2412               13         2432            23        2452           33                2472
        5            2414               14         2434            24        2454           34                2474
        6            2416               15         2436            25        2456           35                2476
        7            2418               16         2438            26        2458           36                2478
        8            2420               17         2440            27        2460           39                2480




Report No.: FR950701AE                                                                          Page : 5 of 33
Report Version: Rev. 01


1.1.6     Test Tool and Duty Cycle
Test Tool                           WNC Combo Tool, Ver 2.1749.00
                                            Duty Cycle (%)                     Duty Factor (dB)
Duty Cycle and Duty Factor
                                                    61.57                            2.11


1.1.7     Power Index of Test Tool
                                                            Test Frequency (MHz)
         Modulation Mode
                                          2402                     2440                     2480
            GFSK/1Mbps                   Default                  Default                 Default


1.2       Local Support Equipment List
                                        Support Equipment List
 No.        Equipment        Brand                 Model           FCC ID              Remarks
   1         Notebook        DELL           Latitude E5470          DoC        ---
   2          Fixture         ---                   ---              ---       Provided by applicant.


1.3       Test Setup Chart
                                          Test Setup Diagram




Report No.: FR950701AE                                                               Page : 6 of 33
Report Version: Rev. 01


1.4       Test Equipment List and Calibration Data
      Test Item       Conducted Emission
      Test Site       Conduction room 1 / (CO01-WS)
    Instrument            Manufacturer               Model No.              Serial No.      Calibration Date      Calibration Until
      Receiver                R&S                       ESR3                  101657         Jan. 08, 2019         Jan. 07, 2020
        LISN           SCHWARZBECK               Schwarzbeck 8127            8127-667        Nov. 05, 2018         Nov. 04, 2019
   RF Cable-CON              Woken                   CFD200-NL            CFD200-NL-001       Oct. 23, 2018        Oct. 23, 2019
   Measurement
                             AUDIX                        e3                6.120210k              NA                   NA
    Software
Note: Calibration Interval of instruments listed above is one year.


      Test Item        Radiated Emission
      Test Site        966 chamber1 / (03CH01-WS)
      Instrument           Manufacturer             Model No.            Serial No.       Calibration Date       Calibration Until
 Spectrum Analyzer              R&S                   FSV40               101498           Dec. 27, 2018          Dec. 26, 2019
       Receiver                 R&S                   ESR3                101658           Dec. 11, 2018          Dec. 10, 2019
    Bilog Antenna         SCHWARZBECK               VULB9168           VULB9168-522         Jul. 18, 2018          Jul. 17, 2019
    Horn Antenna
                          SCHWARZBECK             BBHA 9120 D         BBHA 9120 D 1096     Dec. 18, 2018          Dec. 17, 2019
      1G-18G
    Horn Antenna
                          SCHWARZBECK              BBHA 9170           BBHA 9170517        Nov. 15, 2018          Nov. 14, 2019
      18G-40G
    Loop Antenna                R&S                  HFH2-Z2              100330           Nov. 09, 2018          Nov. 08, 2019
 Loop Antenna Cable        KOAX KABEL              101354-BW             101354-BW         Oct. 08, 2018           Oct. 07, 2019
     Preamplifier              EMC                  EMC02325              980225            Jul. 20, 2018          Jul. 19, 2019
     Preamplifier             Agilent                83017A             MY39501308         Oct. 04, 2018           Oct. 03, 2019
     Preamplifier              EMC                EMC184045B              980192           Aug. 09, 2018          Aug. 08, 2019
                                               EMC104-SM-SM-80
      RF Cable                 EMC                                        181106           Oct. 08, 2018           Oct. 07, 2019
                                                     00
      RF Cable            HUBER+SUHNER           SUCOFLEX104             MY16019/4         Oct. 08, 2018           Oct. 07, 2019
      RF Cable            HUBER+SUHNER           SUCOFLEX104             MY16014/4         Oct. 08, 2018           Oct. 07, 2019
                                               EMCCFD400-NM-N
     LF cable 1M               EMC                                        160502           Oct. 08, 2018           Oct. 07, 2019
                                                   M-1000
     LF cable 3M              Woken              CFD400NL-LW           CFD400NL-001        Oct. 08, 2018           Oct. 07, 2019
    LF cable 10M              Woken              CFD400NL-LW           CFD400NL-002        Oct. 08, 2018           Oct. 07, 2019
    Measurement
                              AUDIX                     e3               6.120210g              NA                      NA
     Software
Note: Calibration Interval of instruments listed above is one year.




Report No.: FR950701AE                                                                                      Page : 7 of 33
Report Version: Rev. 01


   @
           Infernational
           Certification
           Corp.




       Test Item          RF Conducted
       Test Site          (THO1—WS)
      Instrument            Manufacturer           Model No.         Serial No.   Calibration Date      Calibration Until
 Spectrum Analyzer              R&S                  FSV40            101063       Apr. 17, 2019          Apr. 16, 2020
    Power Meter                Anritsu              ML2495A          1241002       Oct. 09, 2018          Oct. 08, 2019

    Power Sensor               Anritsu              MA2411B          1207366       Oct. 09, 2018          Oct. 08, 2019

     DC POWER
       SOURCE                GW INSTEK            GPC—6030D          EMB92433      Oct. 25, 2018          Oct. 24, 2019

    Measurement
      Software                                 SENSE—15247_FS         V5.10.1           NA                     NA

Note: Calibration Interval of instruments listed aboveis one year.



1.5        Test Standards
According to the specification of EUT, the EUT must comply with following standards and KDB documents.

47 CFR FCC Part 15.247
ANSI C63.10—2013
FCC KDB 558074 DO1 15.247 Meas Guidance v05r02


1.6        Deviation from Test Standard and Measurement Procedure
None


1.7        Measurement Uncertainty
I1SO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test
results be included in the report. The measurement uncertainties given below are based on a 95% confidence
level (based on a coverage factor (k=2)

                                                   Measurement Uncertainty
                                             Parameters                                              Uncertainty
Bandwidth                                                                                             +34.130 Hz

Conducted power                                                                                        +0.808 dB

Power density                                                                                          +0.583 dB
Conducted emission                                                                                     +2.715 dB
AC conducted emission                                                                                  +2.92 dB

Radiated emission < 1GHz                                                                               +3.41 dB
Radiated emission > 1GHz                                                                               +4.59 dB




Report No.: FR950701AE                                                                             Page : 8 of 33
Report Version: Rev. 01


C          Infernational
           Certification
           Corp.




2          Test Configuration
2.1        Testing Condition
          Test Item                             Test Site       Ambient Condition                    Tested By
AC Conduction                                   COO1—WwsSs          24°C / 59%                        Alex Tsai
Radiated Emissions                             O3CHO1—WS         24—26°C / 68—69%                   Akun Chung
RF Conducted                                    THO1—WS             22°C / 63%                         Brad Wu
» FCC Designation No.:                     TW2732
» FCC site registration No.:                181692
> ISED#:        10807A
> CAB identifier:                 TW2732


2.2         The Worst Test Modes and Channel Details
                              .                                 Test Frequency                                  Test
                   Test item                             Mode        (MHz)             Data Rate           Configuration

AC Power Line Conducted Emissions                       BTLE         2402                1Mb
Radiated Emissions S 1GHz                                                                      PS
Maximum Output Power

60B bandwidth             _                             BTLE    2402, 2440, 2480         1Mbps
Power spectral density
Radiated Emissions > 1GHz
NOTE:
1.    The EUT was pretested with 3 orientations placed on the table for the radiated emission measurement — X, Y, and
      Z—plane. The X—plane results were found as the worst case and were shown in this report.




Report No.: FR950701AE                                                                              Page : 9 of 33
Report Version: Rev. 01


3         Transmitter Test Results
3.1       Conducted Emissions
3.1.1     Limit of Conducted Emissions
                                        Conducted Emissions Limit
     Frequency Emission (MHz)                   Quasi-Peak                            Average
                0.15-0.5                          66 - 56 *                            56 - 46 *
                  0.5-5                              56                                   46
                   5-30                              60                                   50
Note 1: * Decreases with the logarithm of the frequency.


3.1.2     Test Procedures
1.    The device is placed on a test table, raised 80 cm above the reference ground plane. The vertical
      conducting plane is located 40 cm to the rear of the device.
2.    The device is connected to line impedance stabilization network (LISN) and other accessories are
      connected to other LISN. Measured levels of AC power line conducted emission are across the 50 Ω
      LISN port.
3.    AC conducted emission measurements is made over frequency range from 150 kHz to 30 MHz.
4.    This measurement was performed with AC 120V/60Hz


3.1.3     Test Setup




Report No.: FR950701AE                                                                  Page : 10 of 33
Report Version: Rev. 01


3.1.4     Test Result of Conducted Emissions
Modulation Mode           GFSK                      Test Freq. (MHz)             2402
Power Phase               Line




Note 1: Level (dBuV) = Read Level (dBuV) + LISN Factor (dB) + Cable Loss (dB).
     2: Over Limit (dB) = Level (dBuV) – Limit Line (dBuV).




Report No.: FR950701AE                                                                  Page : 11 of 33
Report Version: Rev. 01


Modulation Mode           GFSK                      Test Freq. (MHz)             2402
Power Phase               Neutral




Note 1: Level (dBuV) = Read Level (dBuV) + LISN Factor (dB) + Cable Loss (dB).
     2: Over Limit (dB) = Level (dBuV) – Limit Line (dBuV).




Report No.: FR950701AE                                                                  Page : 12 of 33
Report Version: Rev. 01


3.2       6dB and Occupied Bandwidth
3.2.1     Limit of 6dB Bandwidth
The minimum 6dB bandwidth shall be at least 500 kHz.


3.2.2     Test Procedures
6dB Bandwidth
 1. Set
     c resolution bandwidth (RBW) = 100 kHz, Video bandwidth = 300 kHz.
2.    Detector = Peak, Trace mode = max hold.
3.    Sweep = auto couple, Allow the trace to stabilize.
4.    Measure the maximum width of the emission that is constrained by the frequencies associated with the
      two outermost amplitude points (upper and lower) that are attenuated by 6dB relative to the maximum
      level measured in the fundamental emission.

Occupied Bandwidth
1. Set resolution bandwidth (RBW) = 1% ~ 5 % of OBW, Video bandwidth = 3 x RBW
2.    Detector = Sample, Trace mode = max hold.
3     Sweep = auto couple, Allow the trace to stabilize.
4.    Use the OBW measurement function of spectrum analyzer to measure the occupied bandwidth.


3.2.3     Test Setup




Report No.: FR950701AE                                                                Page : 13 of 33
Report Version: Rev. 01


3.2.4     Test Result of 6dB and Occupied Bandwidth
Summary
            Mode                  Max-N dB          Max-OBW             ITU-Code              Min-N dB            Min-OBW
                                     (Hz)              (Hz)                                      (Hz)                   (Hz)
        2.4-2.4835GHz                 -                  -                  -                     -                      -
         BT-LE(1Mbps)             713.768k            1.042M            1M04F1D               706.522k             1.038M
Max-N dB = Maximum 6dB down bandwidth; Max-OBW = Maximum 99% occupied bandwidth;
Min-N dB = Minimum 6dB down bandwidth; Min-OBW = Minimum 99% occupied bandwidth;

Result
            Mode                     Result                   Limit                Port 1-N dB                Port 1-OBW
                                                               (Hz)                    (Hz)                       (Hz)
         BT-LE(1Mbps)                     -                     -                       -                           -
           2402MHz                    Pass                    500k                  706.522k                     1.038M
           2440MHz                    Pass                    500k                  706.522k                     1.038M
           2480MHz                    Pass                    500k                  713.768k                     1.042M
Port X-N dB = Port X 6dB down bandwidth; Port X-OBW = Port X 99% occupied bandwidth;




Report No.: FR950701AE                                                                                   Page : 14 of 33
Report Version: Rev. 01


               Infernational
               Certification
               Corp.




    BT—LE(1LMbps)                                                                                                                                              EBW
    2402MHz
    ce                     57                                                                        c
     24020b                o—                                                                         2agrcite                           i               i
    Span                  15—                                                                        Span                   40—       oeh               3t
    2svice                10—                                                                        2svce                  as—                          :
    rew                                                                                              rew                    no
     100z                257                                                                          oz                    asd          |
    vew                  on                                                                          vew                                 1
     3008                us                                                                           1o0ktic               44           !
    Sweep Time                                                                                       Sneep Time             45           I
     Ims
                         a~                                                                          101m:                  his
                                                                                                                                         1i              i
    Detector Type        45—                                                                         Detector Type          as—          i               i
    Pesk                 an~                                                                         semple                 ao~          |               i
[                   ol   sBlf                   :          i              «          rpal l                          O|     $ss          i       i      W      baua
     Pors [/             20055               aanse       zane          2atese         2aosesq                               200755    raoss    zes    2aone     2ans2se

                         GdB(He)       FeSdB(H Fr—6dB(He) OBWI)            FLOBWH) Fh—OBWIHe) im.                    Port
                         70522k        2a0l6506   2a0zzecG     1osm        2i050(G       24023056      Sttk          1




    BT—LE(1Mbps)                                                                                                                                               EBW
    2440MHz
    ce                     5                                                                         c
     2et6Hte              0                                                                           2asort
    Span                  s                                                                          Span
    250                  ao~                                                                         2svie
    row                  as—                                                                         row
    10068z               m~                                                                          Mc
    vw                   us~                                                                         vaw
     3oitte                                                                                           tookic
    Sweep Time           A                                                                           Sweep Time
    Ims                  357                                                                         10ime
    Detecior Type        an~                                                                         Dctector Type
    Pesk                 as—                                                                         Somple
(                   3|   Bd                     :          1             «           id                              |      s            i      i       1      masa
     Pord /              2eess               aaase        2i           2uss          2ait2sd                                2esamse   aasass   mc     2itse     2an256

                         GoBHa)        FeodBH4)   FheGdB(He)   OBWW(Hn     F—OBW(H) Fh—OBWiz) LimitHs                Port
                         mesaak        rageeseo   piogeec      Leiem       2amsmie       2i05i06       Si0k          1



    BT—LE(1Mbps)                                                                                                                                               EBW
    2480MHz
    ce                     57                                                                        c
    248GH                  07                                                                        248GH
    Span                  s                                                                          Span
    25viee               40—                                                                         2svice
    rew                  us                                                                          rew
    10kt                 "m~                                                                         M
    vaw                                                                                              vaw
                         us
     20e                                                                                              1004c
    Sueep Time           an~                                                                         Sneep Time
    Ims                  45—                                                                         101ms
    Detector Type        ao~                                                                         Detsctor Type
     Pesk                as—                                                                         Semple
[                   5    307       i            i           i             +          i       1   —                   —      35           i       i       i     i       i
     Pora..|   /         20056               20386        2456         248056            2481250                            20606     24986    2486   248056       2481250


                         6dBHe)        FedBiHc Fr—6dB(He) OBWIHe)          FL—OBW(He) Fh—OBW(He) LimitHe             Port
                         7376          2a70e52e   2dinaccG     Lotm        2umsol6       2405i5G       Sitk


3.3       RF Output Power
3.3.1     Limit of RF Output Power
Conducted power shall not exceed 1Watt.
Antenna gain <= 6dBi, no any corresponding reduction is in output power limit.


3.3.2     Test Procedures
A broadband RF power meter is used for output power measurement. The video bandwidth of power meter
is greater than DTS bandwidth of EUT. If duty cycle of test signal is not 100 %, trigger and gating function of
power meter will be enabled to capture transmission burst for measuring output power.


3.3.3     Test Setup




Report No.: FR950701AE                                                                    Page : 16 of 33
Report Version: Rev. 01


3.3.4     Test Result of Maximum Output Power
Summary of Peak Conducted Output Power
                  Mode                                Power                   Power
                                                      (dBm)                    (W)
              2.4-2.4835GHz                             -                        -
              BT-LE(1Mbps)                            6.29                    0.00426

Result
                  Mode                       Result           Gain    Power             Power Limit
                                                              (dBi)   (dBm)               (dBm)
              BT-LE(1Mbps)                     -                -       -                    -
                2402MHz                      Pass             -3.59   6.29                 30.00
                2440MHz                      Pass             -3.59   5.42                 30.00
                2480MHz                      Pass             -3.59   4.49                 30.00


Summary of Conducted (Average) Output Power
                  Mode                                Power                    Power
                                                      (dBm)                     (W)
              2.4-2.4835GHz                             -                        -
              BT-LE(1Mbps)                             5.86                   0.00385

Result
                  Mode                       Result           Gain    Power             Power Limit
                                                              (dBi)   (dBm)               (dBm)
              BT-LE(1Mbps)                     -                -       -                    -
                2402MHz                      Pass             -3.59   5.86                   -
                2440MHz                      Pass             -3.59   4.82                   -
                2480MHz                      Pass             -3.59   3.79                   -
Note: Average power is for reference only.




Report No.: FR950701AE                                                         Page : 17 of 33
Report Version: Rev. 01


3.4       Power Spectral Density
3.4.1     Limit of Power Spectral Density
Power spectral density shall not be greater than 8 dBm in any 3 kHz band.


3.4.2     Test Procedures
1.    Set the RBW = 3 kHz, VBW = 10 kHz.
2.    Detector = Peak, Sweep time = auto couple.
3.    Trace mode = max hold, allow trace to fully stabilize.
4.    Use the peak marker function to determine the maximum amplitude level.



3.4.3     Test Setup




Report No.: FR950701AE                                                         Page : 18 of 33
Report Version: Rev. 01


3.4.4     Test Result of Power Spectral Density
Summary
                  Mode                                       PD
                                                          (dBm/RBW)
              2.4-2.4835GHz                                   -
              BT-LE(1Mbps)                                  -9.73


Result
                  Mode             Result         Gain                 PD                PD Limit
                                                  (dBi)             (dBm/RBW)          (dBm/RBW)
              BT-LE(1Mbps)           -              -                   -                    -
                2402MHz            Pass           -3.59               -9.73                8.00
                2440MHz            Pass           -3.59               -10.63               8.00
                2480MHz            Pass           -3.59               -11.71               8.00




Report No.: FR950701AE                                                          Page : 19 of 33
Report Version: Rev. 01


Report No.: FR950701AE    Page : 20 of 33
Report Version: Rev. 01


C          Infernational
           Certification
           Corp.




3.5        Emissions in Restricted Frequency Bands
3.5.1      Limit of Emissions in Restricted Frequency Bands

                                          Restricted Band Emissions Limit
Frequency Range (MHz)|           Field Strength (uV/m)         |Field Strength (dBuV/m)|        Measure Distance (m)
         0.009~0.490                   2400/F(kHz)                     48.5 — 13.8                         300
         0.490~1.705                  24000/F(kHz)                       33.8 — 23                          30
          1.705~30.0                         30                             29                              30
             30~88                          100                             40                              3
            88~216                          150                            43.5                             3
           216~960                          200                             46                              3
          Above 960                         500                             54                              3
Note 1:
Qusai—Peak value is measured for frequency below 1GHz except for 9—90 kHz, 110—490 kHz frequency band. Peak and
average value are measured for frequency above 1GHz. The limit on average radio frequency emission is as above
table. The limit on peak radio frequency emissions is 20 dB above the maximum permitted average emission limit
Note 2:
Measurements may be performed at a distance other than what is specified provided. When performing measurements
at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation
factor as below, Frequency at or above 30 MHz: 20 dB/decade Frequency below 30 MHz: 40 dB/decade.



3.5.2       Test Procedures
1.      Measurement is made at a semi—anechoic chamber that incorporates a turntable allowing a EUT
        rotation of 360°. A continuously—rotating, remotely—controlled turntable is installed at the test site to
        support the EUT and facilitate determination of the direction of maximum radiation for each EUT
        emission frequency. The EUT is placed at test table. For emissions testing at or below 1 GHz, the table
        height is 80 cm above the reference ground plane. For emission measurements above 1 GHz, the table
        height is 1.5 m
2.       Measurement is made with the antenna positioned in both the horizontal and vertical planes of
        polarization. The measurement antenna is varied in height (1m ~4m) above the reference ground plane
      to obtain the maximum signal strength. Distance between EUT and antenna is 3 m.
3.      This investigation is performed with the EUT rotated 360°, the antenna height scanned between 1 m
        and 4 m, and the antenna rotated to repeat the measurements for both the horizontal and vertical
        antenna polarizations.
Note:
1.      120kHz measurement bandwidth of test receiver and Quasi—peak detector is for radiated emission below 1GHz.
2.      RBW=1MHz, VBW=3MHz and Peak detector is for peak measured value of radiated emission above 1GHz.
3.      RBW=1MHz, VBW=1/T and Peak detector is for average measured value of radiated emission above 1GHz.




Report No.: FR950701AE                                                                               Page : 21 of 33
Report Version: Rev. 01


3.5.3     Test Setup
Radiated Emissions below 1 GHz




Radiated Emissions above 1 GHz




Report No.: FR950701AE           Page : 22 of 33
Report Version: Rev. 01


3.5.4     Transmitter Radiated Unwanted Emissions (Below 1GHz)
Modulation                GFSK                       Test Freq. (MHz)             2402
Polarization              Horizontal




Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
      *Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit.



Report No.: FR950701AE                                                                   Page : 23 of 33
Report Version: Rev. 01


Modulation                GFSK                       Test Freq. (MHz)             2402
Polarization              Vertical




Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
      *Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).
Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit.




Report No.: FR950701AE                                                                   Page : 24 of 33
Report Version: Rev. 01


3.5.5     Transmitter Radiated Unwanted Emissions (Above 1GHz) for GFSK
Modulation                GFSK                      Test Freq. (MHz)    2402
Polarization              Horizontal




Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
      *Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).




Report No.: FR950701AE                                                         Page : 25 of 33
Report Version: Rev. 01


Modulation                GFSK                      Test Freq. (MHz)    2402
Polarization              Vertical




Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
      *Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).




Report No.: FR950701AE                                                         Page : 26 of 33
Report Version: Rev. 01


Modulation                GFSK                      Test Freq. (MHz)    2440
Polarization              Horizontal




Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
      *Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).




Report No.: FR950701AE                                                         Page : 27 of 33
Report Version: Rev. 01


Modulation                GFSK                      Test Freq. (MHz)    2440
Polarization              Vertical




Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
      *Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).




Report No.: FR950701AE                                                         Page : 28 of 33
Report Version: Rev. 01


Modulation                GFSK                      Test Freq. (MHz)    2480
Polarization              Horizontal




Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
      *Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).




Report No.: FR950701AE                                                         Page : 29 of 33
Report Version: Rev. 01


Modulation                GFSK                      Test Freq. (MHz)    2480
Polarization              Vertical




Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB)
      *Factor includes antenna factor , cable loss and amplifier gain
Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).




Report No.: FR950701AE                                                         Page : 30 of 33
Report Version: Rev. 01


3.6       Emissions in non-restricted Frequency Bands
3.6.1     Emissions in non-restricted frequency bands limit
Peak power in any 100 kHz bandwidth outside of the authorized frequency band shall be attenuated by at
least 20 dB relative to the maximum in-band peak PSD level in 100 kHz.


3.6.2     Test Procedures
Reference level measurement
1.    Set RBW=100kHz, VBW = 300kHz , Detector = Peak, Sweep time = Auto
2.    Trace = max hold , Allow Trace to fully stabilize
3.    Use the peak marker function to determine the maximum PSD level
Emission level measurement
1.    Set RBW=100kHz, VBW = 300kHz , Detector = Peak, Sweep time = Auto
2.    Trace = max hold , Allow Trace to fully stabilize
3.    Scan Frequency range is up to 25GHz
4.    Use the peak marker function to determine the maximum amplitude level


3.6.3     Test Setup




Report No.: FR950701AE                                                               Page : 31 of 33
Report Version: Rev. 01


3.6.4     Test Result of Emissions in non-restricted Frequency Bands




Report No.: FR950701AE                                                 Page : 32 of 33
Report Version: Rev. 01


C          Infernational
           Certification
           Corp.




4          Test laboratory information
Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our
skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and
one of the widest certification extents in the business.


International Certification Corp (EMC and Wireless Communication Laboratory), it is our definitive objective is
to institute long term, trust—based associations with our clients. The expectation we set up with our clients is
based on outstanding service, practical expertise and devotion to a certified value structure. Our passion is to
grant our clients with best EMC / RF services by oriented knowledgeable and accommodating staff.


Our Test sites are located at Linkou District and Kwei Shan District. Location map can be found on our
website http://www.icertifi.com.tw.


Linkou                                 Kwei Shan                            Kwei Shan Site II
Tel: 886—2—2601—1640                   Tel: 886—3—271—8666                  Tel: 886—3—271—8640
No. 30—2, Ding Fwu Tsuen, Lin          No. 3—1, Lane 6, Wen San 3rd St.,    No. 14—1, Lane 19, Wen San 3rd
Kou District, New Taipei City,         Kwei Shan District, Tao Yuan City    St., Kwei Shan District, Tao Yuan
Taiwan, R.0.C.                         333, Taiwan, R.O.C.                  City 333, Taiwan, R.O.C.

If you have any suggestion, please feel free to contact us as below information.

Tel: 886—3—271—8666
Fax: 886—3—318—0155
Email: ICC_Service@icertifi.com.tw




==END=




Report No.: FR950701AE                                                                     Page : 33 of 33
Report Version: Rev. 01



Document Created: 2019-07-22 17:12:19
Document Modified: 2019-07-22 17:12:19

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC