CFD-S70BT_user manual

FCC ID: AK8CFDS70BT

Users Manual

Download: PDF
FCCID_3940699

Zorro-BT UC2向けGB3校 2018/6/1 Disc and audio formats Listening to music To store the FM antenna 4-740-547-11(1) Power Sources Disc format File format Playable 1 Retract the antenna slowly. Listening to a preset radio Push the antenna downward slowly. Otherwise, it station Connect the AC power cord , or insert six R14 (size C) batteries (not supplied) into the battery compartment . Audio CD CD-DA*2 Yes Turn on the BLUETOOTH function of the may bend or break. CD-R/CD-RW *1, *3 CD-DA*2 Yes BLUETOOTH device and pair this unit with the 1 Press   to turn on the unit. device before listening. (See “Pairing this unit 2 Check the direction of the base screw to make MP3 Yes with a BLUETOOTH device.”) sure you move the antenna in the proper 2 Press FM/AM  repeatedly to select a band.  To a wall outlet Other file formats No direction. 3 Press PRESET + or −  to select the stored To AC IN preset number for the radio station. DVD-ROM, 1 Press AUDIO IN/BLUETOOTH (–PAIRING)  Tilt and rotate the antenna gently. Otherwise, Personal Audio System AC power cord (supplied) Firmly insert the end of the AC power cord all the way into the AC IN jack. DVD-R/DVD-RW, DVD+R/DVD+RW, DVD-RAM All file format No to turn on the BLUETOOTH function. The last connected device is connected it may break. Tip Repeatedly press DISPLAY/ENTER  while listening to the radio to switch the radio information display between preset automatically. number and frequency. Operating Instructions When using the unit on battery power, BD-ROM, All file format No When the BLUETOOTH connection is established, The preset number display automatically returns to the BD-R/BD-RE the BLUETOOTH indicator  lights up. frequency display after 2 seconds have elapsed. disconnect the AC power cord from the Always insert the  side of the unit and the wall outlet. battery first. *1 Audio CD formats conforming to ISO 9660 Level 1/Level 2 2 Start playback of an audio source such as The batteries are or Joliet are supported. CD-R/CD-RW discs created in music, videos, games, etc., on the device. Presetting stations to FAVORITE Bottom  oriented in different other formats are not supported. Refer to the instruction manual of your device for directions. Insert them in *2 CD-DA (Compact Disc Digital Audio) is the standard details on playback operations. RADIO STATIONS buttons the correct orientation as format for audio discs. illustrated here. *3 Discs need to be finalized after writing audio data to Notes You can preset up to three favorite stations to the 3 Rotate the antenna over the catch, Avoid using old batteries make the discs playable on the CD player.  Perform playback operations on the BLUETOOTH device. three FAVORITE RADIO STATIONS (–SET)  with new ones or mixing Operations such as play, pause, and track selection cannot maintaining the same angle. Push the top of buttons. Assign one FM or AM program for each different type of Notes on discs be controlled on this unit. the antenna to stow it inside the catch. button. Press down on the battery compartment batteries.  Due to characteristics of BLUETOOTH wireless technology, ©2019 Sony Corporation Printed in China cover at  and slide it in the direction of  DualDisc and some music discs encoded with copyright the sound played on the unit is slightly delayed from the 1 Press FM/AM  repeatedly to select a band. protection technologies do not conform to the CD the arrow . standard. Therefore, these discs may not be compatible sound played on the BLUETOOTH device. 2 Tune to the station you want to preset.  Noise or sound skipping may occur depending on the with this product. connected BLUETOOTH device and the communication/ 3 Press and hold the desired FAVORITE RADIO CFD-S70BT  This unit can only play MP3 files that have a file extension usage conditions. STATIONS (–SET)  until you hear a beep. Notes of “.mp3”.  When the alert message “LO-BATT” flashes, replace all the batteries with new ones. Also see “Checking the remaining battery The tuned station is preset to the selected button power.” To terminate the BLUETOOTH connection and the number of the button lights up on the  Preset radio stations and paired BLUETOOTH device information are retained even when the AC power cord is disconnected or Maximum numbers of folders and files Do any of following. display. the batteries are removed. The maximum recognizable numbers of folders and files on a CD-R/CD-RW disc are as follows:  Turn off the BLUETOOTH function or power of the (Example: Presetting FM 87.5 MHz to number ) Before operating the system, please read this CAUTION  Before you replace the batteries, remove any CDs or tapes, disconnect any optional components from the unit, and store the FM BLUETOOTH device. antenna  in its original position if extended.  Total number of folders: 99 (including the “ROOT” folder) Operating Instructions thoroughly and retain it for You are cautioned that any changes or modifications  Total number of audio files: 413  Change the function or turn off the power of the To improve radio reception future reference.  In standby mode with the AC power cord connected, “STANDBY” appears on the display. not expressly approved in this manual could void  Number of directory levels (folder depths): 9 (including unit. Use the radio where there is good signal quality, Owner’s Record your authority to operate this equipment. the “ROOT” folder). such as near a window. For better reception, adjust The model and serial numbers are located on the This graphical symbol is located on the bottom of To clear the paired device information the antenna (FM) or reorient the unit itself (AM). bottom of the unit. Record these numbers in the the unit. 1 Hold down STOP ()  until “BT” and “CLEAr” To change the preset station space provided below. Refer to them whenever you Basic Operations Listening to music wirelessly on a alternate on the display. Repeat steps 1 to 3. call upon your Sony dealer regarding this product. BLUETOOTH device The preset station on the button is replaced by the new one. Model No. CFD-S70BT Through a BLUETOOTH connection, you can listen to Serial No. music from wirelessly connected BLUETOOTH FOR UNITED STATES CUSTOMERS. NOT devices such as mobile phones, smartphones, 2 Press DISPLAY/ENTER  within 10 seconds. Listening to preset stations with tablets, music players, etc. APPLICABLE IN CANADA, INCLUDING IN THE When the paired device information is cleared, FAVORITE RADIO STATIONS WARNING PROVINCE OF QUEBEC. POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. Transmitting Receiving “BT” appears on the display and the unit enters buttons the pairing mode. To cancel resetting, press NON APPLICABLE AU CANADA, Y COMPRIS LA To reduce the risk of fire or electric shock, do not STOP ()  before pressing DISPLAY/ENTER Poor reception: Good reception: Press the desired FAVORITE RADIO STATIONS (–SET) PROVINCE DE QUÉBEC. expose this apparatus to rain or moisture. . Far from windows, Near windows, etc.  button. between buildings, etc. To reduce the risk of fire, do not cover the ventilation NOTE: Note Notes Press the button briefly. Otherwise, the preset station will be opening of the appliance with newspapers, This equipment has been tested and found to tablecloths, curtains, etc. Do not expose the comply with the limits for a Class B digital device,  Hands-free calls with a BLUETOOTH mobile phone or Listening to the radio Change the location if reception is poor. replaced. appliance to naked flame sources (for example, pursuant to Part 15 of the FCC Rules. These limits smartphone are not supported. lighted candles). are designed to provide reasonable protection  The sound of CDs, cassettes, and radios played on this 1 Press   to turn on the unit. * CD PLAY/PAUSE () , VOLUME +  and   have a tactile dot. To reduce the risk of fire or electric shock, do not against harmful interference in a residential unit cannot be transmitted to the Bluetooth compatible headphones for playback. 2 Adjust the antenna for optimum reception. Near mobile phones or Playing cassette tapes expose this apparatus to dripping or splashing, and installation. electrical appliances do not place objects filled with liquids, such as This equipment generates, uses and can radiate FM  Use Type I (normal) tapes. Type II (high vases, on the apparatus. radio frequency energy and, if not installed and Getting started The disc is loaded and the disc information Pairing this unit with a position), Type III (ferro-chrome) and Type IV used in accordance with the instructions, may appears on the display. As the main plug is used to disconnect the unit from cause harmful interference to radio BLUETOOTH device Extend the FM antenna  (metal) tapes are not supported. the mains, connect the unit to an easily accessible Audio CD and adjust its length and communications. However, there is no guarantee To turn the power on or off  Remove the slack with a pencil AC outlet. Should you notice an abnormality in the BLUETOOTH devices must be “paired” beforehand. angle for optimum reception. On steel desks or that interference will not occur in a particular Press  (power) . as illustrated to avoid unit, disconnect the main plug from the AC outlet Once BLUETOOTH devices are paired, there is no See “Notes on handling the tables installation. If this equipment does cause harmful mechanical trouble. immediately. need for pairing again. FM antenna.” interference to radio or television reception, The unit is not disconnected from the AC power which can be determined by turning the To adjust the volume Keep the BLUETOOTH device and the unit within Press VOLUME + or − . Total number of tracks Total playing time 1 meter (39 3/8 in) of each other for this operation. AM  Avoid using degraded or dirty tapes. source (mains) as long as it is connected to the wall equipment off and on, the user is encouraged to The volume level of this unit is adjustable in steps  Clean the tape head before use. (See “Cleaning outlet, even if the unit itself has been turned off. try to correct the interference by one or more of 1 Press AUDIO IN/BLUETOOTH (–PAIRING)  the following measures: from 0 to 31. MP3 disc Presetting radio stations the tape heads and tape path”). Do not install the appliance in a confined space, If you want to adjust the volume level continuously, repeatedly until “BT” appears on the display to Reorient the unit itself  Reorient or relocate the receiving antenna. such as a bookcase or built-in cabinet. hold the button down, and release it at the desired turn on the BLUETOOTH function. for optimum reception  Increase the separation between the You can preset up to 30 radio stations in the unit’s level. If no device has been paired yet, such as when (a ferrite bar antenna Do not place anything within 10 mm of the rear of equipment and receiver. memory, 20 for FM and 10 for AM. you press AUDIO IN/BLUETOOTH (–PAIRING)  is built into the unit). 1 Press   (), insert a cassette tape into the cabinet.  Connect the equipment into an outlet on a Total number Total number of for the first time after purchase, the unit will 1 Press   to turn on the unit. the cassette tape compartment () and then Do not expose the batteries (battery pack or circuit different from that to which the To listen through headphones of folders files 3 Press FM/AM  repeatedly to select the “FM” batteries installed) to excessive heat such as receiver is connected. Connect headphones to the  (headphones) jack automatically enter the pairing mode, and the 2 Press FM/AM  repeatedly to select a band. close the compartment cover. BLUETOOTH indicator  will flash rapidly. or “AM” band. sunshine, fire or the like for a long time.  Consult the dealer or an experienced radio/TV . 4 Press CD PLAY/PAUSE ()  to start 3 Hold down FM/AM  until “AUTO” flashes on technician for help. To protect your hearing, avoid listening at excessive 4 Hold down TUNE/ + or −  until the the display. The nameplate is located on the bottom exterior. playback. This equipment must not be co-located or volume level when listening through headphones. frequency digits begin to change on the Side with tape Important Safety Instructions operated in conjunction with any other antenna display. visible facing or transmitter. To turn the bass enhancement function The unit automatically scans the radio upward 1) Read these instructions. 2) Keep these instructions. on or off frequencies and stops when it finds a clear Playing time*1, *2 station. 4 Press DISPLAY/ENTER  within 8 seconds to Playing side 3) Heed all warnings. Press MEGA BASS . This equipment complies with FCC/IC radiation When pairing with two or more facing forward 4) Follow all instructions. “MEGA BASS” lights up when the function is turned If you cannot tune to a station using automatic store the station. exposure limits set forth for an uncontrolled *1 “--:--” appears if the playing time is longer than 100 BLUETOOTH devices 5) Do not use this apparatus near water. on. This function is turned on by default. tuning mode, press TUNE/ + or −  repeatedly The stations are stored in memory from lower environment and meets the FCC radio frequency minutes. Hold down AUDIO IN/BLUETOOTH (–PAIRING) to change the frequency step by step. 6) Clean only with dry cloth. (RF) Exposure Guidelines and RSS-102 of the IC radio *2 Press DISPLAY/ENTER  to switch the playback frequencies to higher ones.  for about 2 seconds until two beeps are heard. When an FM stereo broadcast is received, “ST” 7) Do not block any ventilation openings. Install in frequency (RF) Exposure rules. This equipment has screen between showing the playing time and the 2 Press   to start playback. lights up on the display. Note 8) accordance with the manufacturer’s instructions. Do not install near any heat sources such as very low levels of RF energy that is deemed to Playing a music disc current track number (or the current folder and file number (MP3)). 2 Turn on the BLUETOOTH function of the Perform this step within 8 seconds, or else storing will be Other operations comply without maximum permissive exposure device. Tips cancelled. In this case, repeat from Step 3. radiators, heat registers, stoves, or other evaluation (MPE). apparatus (including amplifiers) that produce 1 Press   to turn on the unit. 3 Perform the pairing procedure on the  The unit of frequency of tuned stations is MHz for the FM To Do this To switch to the CD function from other band and kHz for the AM band. If a station cannot be preset heat. For customers in Canada 2 Insert the tip of your finger into the opening BLUETOOTH device to detect the unit. Stop playback Press  . functions  If the stereo FM reception is noisy, press PLAY MODE  automatically 9) Do not defeat the safety purpose of the This device complies with Industry Canada’s tab to open the CD compartment cover. Press CD PLAY/PAUSE () . 4 Select “CFD-S70BT” on the display of the repeatedly until “Mono” appears on the display. You will Pause playback Press  . To resume playback, polarized or grounding-type plug. A polarized You need to preset a station with a weak signal licence-exempt RSSs. Inserted CDs play automatically. Press STOP ()  BLUETOOTH device. lose the stereo effect, but the reception will be improved. press the button again. plug has two blades with one wider than the manually. Operation is subject to the following two conditions: to stop playback. If “CFD-S70BT” does not appear on the display, Notes on handling the FM antenna other. A grounding type plug has two blades (1) This device may not cause interference; and 1 Press FM/AM  repeatedly to select a band. Fast-forward or Press  or  . repeat from Step 2. rewind and a third grounding prong. The wide blade or Other operations  When adjusting the length, the third prong are provided for your safety. If (2) This device must accept any interference, If Passcode* input is required on the display of hold the antenna by the 2 Tune to the desired station. including interference that may cause undesired Eject the Press   while playback is the provided plug does not fit into your outlet, operation of the device. To Do this the BLUETOOTH device, input “0000”. thickest part and top, and 3 Hold down DISPLAY/ENTER  until “FM-xx” cassette The BLUETOOTH indicator  stops flashing once extend/retract it slowly. stopped. consult an electrician for replacement of the Pause playback Press CD PLAY/PAUSE () . or “AM-xx” flashes on the display. obsolete outlet. To return to playback, press the the BLUETOOTH connection is established. 3 Place a disc in the CD compartment and then (Example: FM) 10) Protect the power cord from being walked on or * “Passcode” may be referred to as “Passkey,” “PIN code,” Notes button again. pinched particularly at plugs, convenience close the compartment cover. “PIN number,” or “Password.”  Do not turn off the power during tape playback. Doing so Stop playback Press STOP () . If you press  When adjusting the direction, may cause a malfunction. Stop playback before turning receptacles, and the point where they exit from Push down on the center of the disc hold the antenna by the CD PLAY/PAUSE ()  after Tip off the power. the apparatus. until it fits into place. You can pair up to 8 BLUETOOTH devices. If a 9th device is thickest part and rotate it. If playback has been stopped, it  Press   when “STOP TAPE” appears on the display. 11) Only use attachments/accessories specified by will start from the beginning of paired, the oldest paired or connected device will be you move the antenna by the 4 Press PRESET + or −  until the preset This message appears after Fast Forwarding or Rewinding the manufacturer. deleted. top or apply strong force, it the track/file you were last may break. number for the station you want flashes on for 8 minutes. 12) Use only with the cart, stand, tripod, bracket, or table specified by the playing (Resume Play*). If you Notes the display. manufacturer, or sold with the want to start playback from the  After about 5 minutes, the unit’s pairing mode is 5 Press DISPLAY/ENTER  to store the station. apparatus. When a cart is used, use first track/file on the disc, press cancelled, and the BLUETOOTH indicator  starts to flash Any previously registered station will be replaced caution when moving the cart/ STOP ()  twice, and then slowly. If the pairing mode is cancelled during this with the new one. If you want to cancel apparatus combination to avoid injury press CD PLAY/PAUSE () . procedure, start over from Step 1. presetting, press STOP () . Label side up  The passcode of the unit is fixed as “0000”. The unit from tip-over. Select a folder Press TUNE/ + or − . cannot be paired with a BLUETOOTH device whose 13) Unplug this apparatus during lightning storms or on an MP3 disc Passcode is not “0000”. when unused for long periods of time.  After you reset the unit, it may not be able to connect Select a track/ Press  or  . You can 14) Refer all servicing to qualified service personnel. with your iPhone/iPod touch. In this case, delete the file skip tracks/files one by one. Servicing is required when the apparatus has pairing information for the unit from your iPhone/iPod been damaged in any way, such as power- Find a point in a Hold down  or   touch, and then repeat the pairing operation. supply cord or plug is damaged, liquid has been track/file during playback, and release it spilled or objects have fallen into the apparatus, at the desired point. the apparatus has been exposed to rain or moisture, does not operate normally, or has * Resume Play is cancelled when you open the CD compartment cover or turn off the power. been dropped. CFD-S70BT_U2 [US] 4-740-547-11(1)

Creating your own program (Program Power sources BLUETOOTH device Radio Battery Life*1, *2 Recording on a tape Connecting optional components Play) Checking the remaining battery  For AC operation, use the supplied AC power cord; Playback of CD Approx. 10 hours (at a volume level of around 23) do not use any other cord. There is no sound. The sound is weak or reception is poor. You can enjoy sound from an optional component, You can arrange the playing order of up to 25 tracks/files on a disc. power  Unplug the unit from the wall outlet if it will not  Move the unit closer to the BLUETOOTH device.  Replace all the batteries with new ones. BLUETOOTH Approx. XX hours  Use Type I (normal) tapes. Type II (high Recording FM programs such as a TV or portable digital music player, be used for an extended period of time. Check for interference from a wireless LAN,  Change the location of the unit (See “To improve position), Type III (ferro-chrome), and Type IV through the speakers of this unit. 1 Press   to turn on the unit, and place a When using the unit on battery power, you can another 2.4 GHz wireless device, or a microwave radio reception”). Approx. 23 hours (metal) tapes are not supported. check how much battery power remains.  When not using the batteries, remove them to Playback of tape Turn off the power of each component before disc in the CD compartment. avoid damage from battery leakage or corrosion. oven.  If the overwrite protection tab has been The remaining battery power is displayed in 5 levels  Adjust the antenna (See Step 2 of “Listening to a Approx. 15 hours (at a volume level of around 23) removed, cover the area with adhesive tape. making any connections. 2 Press PLAY MODE  repeatedly until “PGM”  Check the BLUETOOTH connection between the radio”). *1 Measured by Sony standards. The actual battery life as shown below (battery icons are for illustrative unit and the BLUETOOTH device. For details, refer to the instruction manual of the appears on the display. Placement may vary depending on the circumstances of the unit  Use the AC power cord to avoid an unexpected purposes only). The higher the number, the more component to be connected. 3 Press  or   to select a track/file. battery power remains.  To avoid malfunction, do not leave the unit under  Repeat pairing (See “Pairing this unit with a A small humming noise is heard from the or operating conditions. recording failure. When you want to specify a folder that contains the following conditions. BLUETOOTH device”). radio. 2 * When using Sony alkaline batteries. 1 Connect the AUDIO IN jack  to the line - At high temperatures such as in direct sunlight,  Keep away from metal objects or surfaces. MP3 files, press TUNE/ + or −  first to select a Full  This is not a malfunction. You may hear a small Dimensions output jack of the component using an audio near a heat source, or under lighting equipment.  Check the BLUETOOTH function on the humming noise from the radio depending on the Approx. 310 mm × 140 mm × 212 mm (12 1/4 in × 5 5/8 in × folder, and then press  or   to select a 1 Press   to turn on the unit, and prepare connection cable (not supplied). - In a car with the windows closed (especially in BLUETOOTH device. status of the power supply. 8 3/8 in) (W/H/D) (incl. projecting parts) file. the source you want to record. 2 Turn the connected component on. summer) . Mass 4 Press DISPLAY/ENTER . Approx. X.X kg (XX.X oz) (excl. batteries) 3 Press AUDIO IN/BLUETOOTH (–PAIRING)  - Near objects susceptible to magnetism The sound skips or noise occurs. Tape  To record CD-DA tracks or MP3 files on The track/file is (Example: audio CD) Empty (watches, credit cards). Various factors can cause noise or sound skipping. Approx. X.X kg (XX.X oz) (incl. batteries) a disc until “AU IN” appears on the display, and start programmed and the Please check the following causes and solutions. Supplied accessories - Subject to heavy vibration Noise is heard during playback. Place a disc in the CD compartment. Do not playing sound on the connected component. program step number AC power cord (1) Cause Solutions  This is not a malfunction. You may hear start playback. See “Playing a music disc.” The sound from the connected component is appears. Operation background noise (“hissing”), mechanical noise, or Design and specifications are subject to change without output from the speakers. Scenario 1: Many  Quit unused applications  To record a radio program Step number  If condensation forms on the lens inside the CD applications are running on on the smartphone/tablet. noise due to electromagnetic interference in the notice. After the “LO-BATT” alert flashes for 8 seconds, player due to rapid rises in temperature or heavy playback. Press FM/AM  repeatedly to select a band Tip the smartphone/tablet at  Reboot the smartphone/ and tune to the desired station. See “Listening 5 Repeat steps 3 and 4 to program additional the unit turns off automatically. Replace all the humidity, remove the CD and leave the CD the same time. tablet. To connect the unit to a TV or video recorder/player, batteries with new ones when this message compartment open for about an hour so that the The performance of the The   button does not function or the tracks/files. to a radio.” use an extension cable (not supplied) with a 6 Press CD PLAY/PAUSE ()  to start appears. moisture can evaporate. smartphone/tablet may  Free up memory using a dedicated application to tape does not start playback or recording. License and Trademark Notice stereo-mini jack on one end and two phono plugs Otherwise, the unit will not turn on, or will only become sluggish, which  To record sound from a connected on the other end. Program Play. turn on for a short period of time and then turn affects the BLUETOOTH refresh memory usage on  Check the overwrite protection tab. BLUETOOTH device Handling the unit the smartphone/tablet. To play the same program again, press off again. communication.  MPEG Layer-3 audio coding technology and Press AUDIO IN/BLUETOOTH (–PAIRING)   Shut the CD compartment cover after changing If the problem persists after trying the above, patents licensed from Fraunhofer IIS and CD PLAY/PAUSE () . CDs to avoid dust contamination. Scenario 2: Listening to  Check if the Wi-Fi router is until “BT” appears on the display. Establish a To check the battery level, perform the following. unplug the AC power cord or remove all the Thomson. BLUETOOTH connection with the device. Then, Other Operations Note that the created program is cleared in the following cases:  When carrying the unit, hold it by the handle  to avoid dropping it. streaming content in an overloaded Wi-Fi network overloaded.  Avoid listening to batteries. After all the indications on the display  The BLUETOOTH® word mark and logos are start playback. See “Listening to music  When using the CD or FM/AM function environment streaming content while disappear, plug in the AC power cord again, or registered trademarks owned by Bluetooth SIG,  When you open the CD compartment cover. wirelessly on a BLUETOOTH device.” Press DISPLAY/ENTER  repeatedly. When multiple devices multiple devices are re-insert the batteries. If the problem is still not Inc. and any use of such marks by Sony  When you turn off the power of the unit in the Cleaning the cabinet (computers, smartphones, Corporation is under license. simultaneously accessing resolved, consult your nearest Sony dealer. CD function.  To record sound from a connected Selecting a CD play mode  When using the BLUETOOTH, tape or AUDIO IN function  Clean the cabinet, panel, and controls with a soft cloth dipped in a mild detergent solution. Abrasive tablets, etc.) simultaneously access the same Wi-Fi the same Wi-Fi network to view streaming content,  Other trademarks and trade names are those of optional component Note network and transmit large their respective owners. pads, scouring powder, and solvents such as download software/ Press AUDIO IN/BLUETOOTH (–PAIRING)  until “AU IN” appears on the display. Connect  You can select a CD play mode while a disc is If you try to program 26 tracks/files or more, “FULL” flashes on the display. Press DISPLAY/ENTER  once. alcohol or benzine may damage the unit. bandwidths of data, the Wi-Fi router becomes applications, play online Specifications ®  ™ and marks are omitted in the documents. games, etc. stopped.* overloaded. This may affect an optional component such as a TV, portable To display programmed track/file information  Press STOP ()  if “PUSH STOP” is displayed. Consult your nearest Sony dealer if you have any your listening. digital music player, etc. to the AUDIO IN jack . Then, start playback. * If a function other than CD is selected, press After creating your own program, you can check information about programmed tracks/files. Cleaning the tape heads and tape questions or problems concerning your unit. AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION 2 Press   (). Insert a cassette tape into CD PLAY/PAUSE ()  to switch to the CD function. Press STOP ()  to stop playback, and then press path Scenario 3: Influence from  Use the BLUETOOTH (The United States model only) With 4-ohm loads, both channels driven from 150 Hz  external factors such as device and this unit as far the cassette tape compartment (). Close the DISPLAY/ENTER  repeatedly. The display changes compartment cover. as follows: Failure to clean the tape heads can degrade the Troubleshooting microwaves, other wireless devices, etc. away as possible from such sources to avoid 10,000 Hz; rated 1.1 W per channel-minimum RMS power, with no more than 10 % total harmonic distortion in AC sound quality or make the unit unable to play or operation. Press PLAY MODE  repeatedly. Total number of steps  Last programmed track/ BLUETOOTH devices may be radio-wave interference. record tapes. Clean after every 10 hours of use, affected by these radio file number using a commercially available cleaning kit. General waves when they are used  Reboot the BLUETOOTH CD player section device. Then, clear the System Side with tape in a location with a mixture paired device information Compact disc digital audio system To cancel Program Play The power does not turn on. visible facing Each time you press the button, the indication Press STOP ()  to stop playback, and then press  To clean the pinch roller, capstan and of multiple radio waves. from the unit (see “To clear Laser diode properties upward changes as follows: play/recording head  Connect the AC power cord securely to both the the paired device Emission duration: Continuous PLAY MODE  repeatedly until “PGM” disappears wall outlet and the AC IN jack. information”) and repeat  Normal play (None) from the display. Press   () and then perform cleaning (). Laser output: Less than 44.6 μW Recording side  Check if the batteries are inserted correctly, pairing (see “Pairing this (This output is the value measurement at a distance of facing forward  unit with a BLUETOOTH 200 mm from the objective lens surface on the optical To delete all tracks/files in the current  To clean the erase-head matching the polarities. Single repeat ( 1) device”). pick-up block with 7 mm aperture.)  program Press   () while holding down the lever () There is no sound. Scenario 4: The audio drops  Use the BLUETOOTH Number of channels All repeat ( ) Stop playback, and then press STOP () . with your finger, and then perform cleaning (). 2 out. device closer to the unit.  “noSTEP” appears and you can create a new  Check the volume level of the unit. 3 Press   to start recording (the play button Selected folder play ( )* program, following the procedure “Creating your  Unplug the headphones if listening through Because BLUETOOTH  Reposition the unit. Frequency response transmissions are a form of 20 Hz  20,000 Hz +1/–2 dB   depresses automatically at the same  own program (Program Play).” speakers. wireless communication, Wow and flutter time). Selected folder repeat play ( , )* sometimes transmission Below measurable limit  The sound is noisy. may become unstable. Supported audio format  When recording from a disc Shuffle play ( ) Playback starts automatically and recording of  Using the Sleep Timer  Is someone using a mobile phone or other equipment emitting radio waves near the unit? Scenario 5: Using the BLUETOOTH device  Use the BLUETOOTH device closer to the unit. MP3 (MPEG 1 Audio Layer-3) all the tracks/files on the disc proceeds from Program play (PGM) BLUETOOTH section If so, move the unit and the BLUETOOTH device outdoors.  Move the BLUETOOTH the first track/file. When the tape reaches the  1 Press SLEEP . away from it. Devices such as mobile phones, etc. The sound may skip more device closer to the unit Communication System BLUETOOTH Specification Version 2.1 + EDR end, recording stops automatically. Program repeat play ( , PGM) The default setting (“90”) appears and the can affect BLUETOOTH communication. frequently when you use the (about 30 cm) and then BLUETOOTH device outdoors Maximum communication range “SLEEP” indicator lights up on the display. gradually move it away Line of sight approx. 10 m (32 feet)*1  When recording a radio program, or 2 Press SLEEP  repeatedly to select the because there are fewer from the unit to find a sound from a connected BLUETOOTH * These functions are available only when playing MP3 files CD player hard surfaces for better position. Frequency band on an MP3 disc. Lever 2.4 GHz band (2.4000 GHz  2.4835 GHz) desired setting. BLUETOOTH radio signals to device or optional component The CD player does not play even when a Modulation method Note  reflect off of. Recording continues until the tape reaches the FHSS The selected CD play mode is cleared when you open the CD Use a cotton CD is in place. Scenario 6: The BLUETOOTH  Move the BLUETOOTH end. Compatible BLUETOOTH Profiles*2 compartment cover or when power to the unit is cut off. swab  Place the CD with the label side up. device is inside a breast device to a position where A2DP (Advanced Audio Distribution Profile) Tips moistened with  Clean the CD. pocket, pants pocket, or there is no obstacle. bag Supported codec*3  Adjusting the volume or audio emphasis on the unit will Playing tracks/files repeatedly (Repeat cleaning fluid.  The CD-R/CD-RW is blank or unfinalized.  Use the BLUETOOTH SBC (Subband Codec) not affect the recording level. However, adjusting them on Each time you press the button, the duration (in The human body can block device closer to the unit. the connected BLUETOOTH device or optional component Play) minutes) changes on the display, and the Pinch roller Erase-head  There are no playable MP3 files on the disc. the BLUETOOTH antenna Transmission range (A2DP) There is a problem with the quality of the CD-R/ inside this unit and the 20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz) will. selected setting is confirmed automatically after  1 Press   to turn on the unit. Place a disc in about 4 seconds. CD-RW, recording device, or application software. BLUETOOTH device, and *1 The actual range will vary depending on factors such as  If the AM program makes whistling sounds after you press   in Step 3, press PLAY MODE  repeatedly to select the CD compartment. The unit turns off automatically after a set time obstruct BLUETOOTH obstacles between devices, magnetic fields around a transmission. microwave oven, static electricity, reception sensitivity, a position of the ISS (Interference Suppress Switch) that 2 Select a play mode. has elapsed. Capstan Play/recording head “noCD” appears when the disc is loaded. aerial performance, operating system, application software, may decrease the noise. 3 Prepare the playback source (see the table  No disc is set in the CD compartment. Set a disc. etc. Other operations below). Press CD PLAY/PAUSE () . To cancel the Sleep Timer  The CD may have a reading problem. Replace the The correspondence distance is short. 2 * BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices. Press SLEEP  repeatedly to select “OFF” or turn off disc.  Remove any obstacle between the unit and the To Do this *3 Codec: Audio signal compression and conversion format. To repeat Do this the unit.  The CD may be upside down. Place the disc with device or move the device and the unit away from Stop recording Press  . the label side up. the obstacle. Radio section A single track/ Select a track/file by pressing Pause recording Press  . To resume recording, file ( 1)  or  . If you want to Tips  The “SLEEP” indicator flashes once every 8 seconds while Precautions  An unplayable disc (DVD, BD, etc.) is loaded.  Re-position this unit. Frequency range FM: 87.5 MHz  108 MHz (100 kHz step) press the button again. repeat an MP3 file in a specific the Sleep Timer is activated. Replace the disc.  Try using the BLUETOOTH device in another AM: 530 kHz  1,710 kHz (10 kHz step) folder, press TUNE/ + or −   The “SLEEP” indicator starts flashing on the display about Notes on discs position. Intermediate frequency to select a folder before selecting 1 minute before the unit turns off.  Handle CDs by their edges. “00” appears on the display when the disc FM: 128 kHz To record starting from a specific track/file the file.  You can check the time left until the unit turns off by Fingerprints will cause noise or is loaded. A connection cannot be established. AM: 45 kHz Press  or   to select the track/file on the pressing SLEEP  again after setting the Sleep Timer. Do  No audio files recorded in supported formats, or a  Depending on the device, it may require some Antennas All tracks/files No preparation is required. Start errors. disc. Then press  . not perform this operation while the “SLEEP” indicator is file to be played back has an unsupported file time to start communication. FM: Telescopic antenna ( ) playback. AM: Built-in ferrite bar antenna Playback starts automatically, and recording of the flashing (flashing starts 1 minute before the unit turns off). extension. If you do, the Sleep Timer will be cancelled instead of  Clean CDs with a soft cloth or  Repeat pairing (See “Pairing this unit with a selected track/file and the following tracks/files A selected folder Select a folder by pressing Tape deck section displaying the time remaining. commercial CD cleaning cloth as BLUETOOTH device”). proceeds until the tape reaches the end. on an MP3 disc TUNE/ + or − . “Err” appears when the disc is loaded. Recording system ( , )  When the set time has elapsed during a tape function illustrated. Fingerprints or dirt may  Check that the BLUETOOTH device is compatible* 4-track 2-channel, stereo operation (playing/recording/erasing), the “SLEEP” cause noise or errors.  The CD may be dirty. Clean the disc. with this unit. Fast winding time To record from partway through the current Programmed Create a program by performing indicator starts flashing, but the unit does not turn off CD-DA track or MP3 file  Avoid cleaning with solvents,  The CD may have scratches. Replace the disc. Approx. 150 s (sec.) with Sony cassette C-60 tracks/files Steps 3 to 5 of “Creating your until after the operation ends. Pairing fails. Frequency response Press CD PLAY/PAUSE ()  to pause playback commercial cleaner, or anti-static ( , PGM) own program (Program Play).”  Release the  or   button by pressing   after The sound drops out. Type I (normal): 80 Hz – 10,000 Hz where you want to start recording. Then press  . spray.  Bring the BLUETOOTH device closer to the unit. the unit is turned off if fast-forwarding or rewinding is performed in the tape function.  Reduce the volume.  Delete the model name of the unit from the Input  Avoid exposing CDs to sunlight or heat. AUDIO IN To record favorite CD-DA tracks or MP3 files To cancel Repeat Play  Also turn off the power of the connected BLUETOOTH  Clean the CD, or replace it if the CD is badly BLUETOOTH device and repeat pairing (See Press STOP ()  to stop playback, and then press  Do not put stickers on the surfaces of CDs. damaged. “Pairing this unit with a BLUETOOTH device”). Stereo mini jack on a disc device or optional component connected to the AUDIO IN Create a program (see “Creating your own program PLAY MODE  repeatedly until “ ” (or “ 1”) jack . The Sleep Timer does not turn off the power of  After playing, store the CD in its case.  Place the unit in a location free from vibrations.  Check that the BLUETOOTH device is compatible* Output disappears from the display.  (headphones) stereo mini jack (Program Play)”). Press   to start recording. the external device or component.  Clean the lens with a commercially available with this unit. Notes on cassettes For 16   32  impedance headphones blower.  Clear the paired device information on the unit To erase recorded cassette tapes Playing tracks/files in random order  Remove the overwrite protection tab from side A (see “To clear the paired device information”) and General or B to prevent accidental recording. If you want  The sound may drop out or noise may be heard Speaker To erase a cassette tape, you need to record silence (Shuffle Play) when using a poor quality CD-R/CD-RW or if there repeat pairing (see “Pairing this unit with a to reuse the tape for recording, cover the area Full range, 8 cm (3 1/4 in) dia., 4 , cone type (2) over the previous recording. is a problem with the recording device or BLUETOOTH device”). 1 Press   to turn on the unit, and place a using adhesive tape. Power output 1 Press   to turn on the unit. application software. 1.7 W + 1.7 W (at 4 , 10% harmonic distortion) disc in the CD compartment. * For the latest information on compatible BLUETOOTH 2 Insert a recorded tape into the cassette tape devices, check the websites below. Power requirements compartment. 2 Press PLAY MODE  repeatedly until “ ” Side A For customers in the USA: 120 V AC, 60 Hz (AC power supply) appears on the display. Tab for side A http://esupport.sony.com 9 V DC (6 R14 (size C) batteries) 3 Press  . Tab for side B The erasing process starts. The previous 3 Press CD PLAY/PAUSE ()  to start Shuffle For customers in Canada: Power consumption 11 W (English) http://sony.ca/support recording is overwritten with silent data. Play. (French) http://fr.sony.ca/support Less than 1 W (during standby mode)  Using a cassette tape with 90 minutes or less of To cancel Shuffle Play play time is recommended. Press STOP ()  to stop playback, and then press PLAY MODE  repeatedly until “ ” disappears Safety from the display.  Never disassemble the unit. Laser and high voltages are used. Tip  Unplug the cord from the unit if any solid object During Shuffle Play, you cannot select the previous track/file or liquid gets inside. Have the unit checked by by pressing  . qualified personnel before resuming operation. CFD-S70BT_U2 [US] 4-740-547-11(1)


Document Created: 2018-06-04 09:27:36
Document Modified: 2018-06-04 09:27:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC