Final user manual

FCC ID: AK8145899511

Users Manual

Download: PDF
FCCID_3955340

Parts and Controls WARNING Notes on Use The following shows the parts and controls referred in the Notes on Use section of this To reduce fire or shock hazard, do not expose the unit to rain or moisture. document. For the locations of any other parts and controls and their features, refer to the On the packaging material Help Guide. IMPORTANT SAFETY INSTRUCTIONS Please retain the packaging material. If needed, it provides a secure means of transporting -SAVE THESE INSTRUCTIONS your aibo. DANGER aibo When powering off aibo in case of emergency TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS Press and hold the power button at the back of the neck for 2 seconds to power off aibo. For your safety    If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of If this does not work, press and hold the power button for 10 seconds or longer to forcibly power it off. A forced power off may cause loss of data and settings. the proper configuration for the power outlet.   On handling aibo  CAUTION • Do not use aibo on a place from which aibo may fall off or on an unstable place, for  Observe the following cautions, as there may be a risk of heat generation, fire or explosion. example, with vibration or an uneven surface. * Lithium-ion battery is built into the product. aibo may fall off or fall over, resulting in a physical injury or a malfunction of aibo.   • Charge the product by the designated charging method.  • Do not place the product in or near fire, such as near a fireplace, or put the product in a microwave.   • Do not leave the product in a car in hot weather.  • Do not store or use the product in a hot and humid place such as in a sauna bath. • Do not disassemble, crush or pierce the product. • Do not expose the product to excessive shock such as dropping from a high place.  • Do not expose the product to high temperatures above 60 °C (140 °F). • Keep the product dry. • Do not place fragile or dangerous objects around aibo. ENTERTAINMENT ROBOT Dispose of the product appropriately. aibo moves around on its own and may cause damage to your property or a freak ERS-1000  Head  Status LED Charge the product by the designated charging method in the instruction manual. accident.  Eye The status LED indicates aibo’s state as • Do not expose to extremely low temperatures of -20 °C (-4 °F) or lower or extremely low  Nose camera follows: pressures of 11.6 kPa or lower.  ToF sensor Lit in green: powered-up state  Neck Lit in orange: battery charging state Use a nearby wall outlet (wall socket) when using the AC Adaptor. If any malfunction  Motion sensor Lit in red: sleep state occurs, disconnect the plug from the wall outlet (wall socket) immediately to disconnect  Ranging sensors (2) Flashing in red: error state from the power source. Documentation for aibo  Forepaws  Power button Use of optical instruments with this product will increase eye hazard. Starting your life with aibo™  Ear  Loin camera • Do not put your hands or fingers in gaps around aibo’s movable parts. Provides the introductory information needed for starting your life with  Tail Your hands or fingers may get caught between aibo’s body and parts, resulting in a Use of controls or adjustments or performance of procedures other than those specified aibo.  Back paws physical injury. herein may result in hazardous radiation exposure. Please read this document first. On the torso You are cautioned that any changes or modifications not expressly approved in this manual For your safety (this document) could void your authority to operate this equipment. Provides the precautions to ensure safe use and the specifications. Note: This equipment has been tested and found to comply with the limits for a Class B Behind the lid digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This • Do not lift or swing around aibo by grasping its head, ear, tail, forepaw, back paw, or loin; Help Guide (Web Manual)  equipment generates, uses, and can radiate radio frequency energy and, if not installed or twist these parts. and used in accordance with the instructions, may cause harmful interference to radio Provides information concerning communication with your aibo and its  Moving any of aibo’s movable parts beyond its limit may break the part, resulting in a growth. communications. However, there is no guarantee that interference will not occur in a physical injury. Please access this documentation with your smartphone or computer.  particular installation. If this equipment does cause harmful interference to radio or aibo’s ears and tail come off from the body when they are forcefully pulled. This is television reception, which can be determined by turning the equipment off and on, designed for safety and does not indicate a failure. For attaching the removed ears and http://rd1.sony.net/help/aibo/ers1000/en-us/ the user is encouraged to try to correct the interference by one or more of the following tail back to the body, refer to the Help Guide. measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver.  Charging pins – Connect the equipment into an outlet on a circuit different from that to which the receiver  Network switch is connected.  Model name label (the model, serial number and FCC ID) – Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled Charging station environment and meets the FCC radio frequency (RF) Exposure Guidelines. • Do not use aibo outdoors to avoid ingress of water or foreign matters. Such ingress may The following FCC IDs have been tested and found to comply with FCC radiation exposure limits in all operating modes and orientations of the host platform. cause a malfunction of aibo.   FCC ID: AK8145899511 • Do not use aibo on a hard floor, such as a concrete floor, to avoid the risk of scratching Owner’s Record FCC ID: AK8145890811 aibo or its malfunction. • Do not use aibo on a slippery floor or a shag carpet. aibo may fail to sit up or move Record the model and serial number (which are located behind the lid on aibo’s torso) in  This device and its antenna(s) must not be co-located or operating with any other antenna forward. It is recommended that you use aibo on a wooden floor or a carpet with short the space provided below. Refer to these numbers whenever you call your Sony dealer or transmitter except Grant condition. Users are not permitted to modify this transmitter threads. regarding this product. device. Any unauthorized changes made to this device could void your authority to operate • Do not exert excessive force on aibo to prevent its activities. Model No. ERS-1000  this device. • Keep aibo’s movable parts free of anything that restrict their movements, such as a Serial No. sticker or a ribbon.  Charging stand Supplier’s Declaration of Conformity Trade Name: SONY • Do not lubricate aibo’s movable parts.  Charging mat Model: AL001 • Do not allow a strong physical impact (e.g. dropping aibo) or excessive force (e.g. putting  Supply terminal Responsible Party: Sony Electronics Inc. a heavy object on aibo) exerted on aibo to avoid the risk of its malfunction.  Charge connector Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A. • aibo’s operating temperature range is from 5 °C to 35 °C (41 °F to 95 °F). Use of aibo in an Telephone Number: 858-942-2230 extremely cold or hot place where the temperature falls below or exceeds the range may This device complies with part 15 of the FCC rules. Operation is subject to the following cause a malfunction of aibo. two conditions: (1) This device may not cause harmful interference, and (2) this device • Do not leave aibo in a place subject to excessive dust or cigarette smoke. must accept any interference received, including interference that may cause undesired • Do not leave aibo in a place subject to extremely high/low temperatures or high operation. humidity. The interior temperature of a closed vehicle parked under the blazing sun or in summertime rises considerably high. Leaving aibo in such a vehicle may cause This equipment must not be co-located or operated in conjunction with any other antenna deformation of aibo or its malfunction. or transmitter. Product key • aibo’s network features are solely applicable to the networks in USA. Depending on the The FCC IDs are located behind the lid on the aibo’s torso. To see the IDs, please remove country or region, restrictions are imposed on use of radio waves. Use of aibo’s network the lid. features in such countries or regions may result in a violation of law. • Do not use aibo in an aircraft. Radio waves from aibo may affect the operation of the aircraft to cause an accident due to a malfunction of the aircraft equipment. See the back side. ERS-1000 USGB 4-724-606-21(1)

• Do not use aibo’s network features when aibo is likely to approach within a radius On handling the SIM card Supplied accessories of 15 cm (6 in.) from persons implanted with electric medical equipment, such as an • The SIM card in aibo is solely provided for use with aibo. Do not use it with any other Specifications implantable cardioverter defibrillator or an implantable cardiac pacemaker. SIM card (inserted in aibo) products. Charging station* (ERA-1001) Radio waves from aibo may affect the operation of the electric medical equipment. Take • When you removed the SIM card from aibo, be sure to keep it from missing and watch either of the following actions to turn off the network features. aibo * Referred to when the charging stand is attached to the charging mat. over small children to prevent them from swallowing the card. AC adapter ––Slide the network switch on the torso to OFF. • For removing the SIM card, refer to the Help Guide. Movable parts Power cord ––Press and hold the power button at the back of the neck for 2 seconds to power off Head: 3 degrees of freedom Pink ball aibo. On cleaning Mouth: 1 degree of freedom Starting your life with aibo™ • At a place subject to intensive direct sunlight, such as by the window in daytime, aibo’s Neck: 1 degree of freedom • When aibo or the charging station is soiled with small particles and dust, gently wipe For your safety (this document) sensor may malfunction. Loin: 1 degree of freedom them off with a dry, soft cloth. Product key Forepaws/Back paws (4): 3 degrees of freedom • Protect aibo’s cameras and sensors from being scratched or soiled with dust or • Do not use any volatile agent, such as alcohol or paint thinner, to avoid damaging the Ears (2): 1 degree of freedom Design and specifications are subject to change without notice. fingerprints. Scratches or soil residues on their surface cause aibo’s detection capabilities finish. Tail: 2 degrees of freedom to deteriorate. (22 degrees of freedom in total) • If residues of dust or fingerprints are found on aibo’s camera or sensor covers, do not On Wi-Fi communication Trademarks and copyrights Buttons and switch touch them with bare hands. Instead, blow them off with a commercially available blower Please be advised that you are expected to pay any necessary costs for connecting aibo to • Wi-Fi and Wi-Fi Protected Setup are either trademarks or registered trademarks of Wi-Fi Power button or wipe them off with a soft cloth. a Wi-Fi network. Alliance. Volume button (+, -) • Do not use aibo on a place where aibo might fall off or at a place surrounded by • QR Code is a registered trademark of DENSO WAVE INCORPORATED. Network switch obstacles or within reach of small children. By falling or colliding, aibo may damage your On data compensation • System and/or product names mentioned in this document are, in general, registered LED property or cause a physical injury or a malfunction of aibo. Please be advised that Sony In the event that your data is not recorded and thus unavailable for retrieval due to some trademarks or trademarks of their respective developers and the “™” and “®” marks Status LED, Network LED assumes no liability for any damage or loss that you may suffer as a result of such fall or reasons, such as a malfunction of aibo or a communication error, please be advised that are omitted in the text. Furthermore, any copyrights not explicitly mentioned in this collision. Sony assumes no liability for compensating lost data. Displays document are the property of their respective owners. OLED (eyes) (2) Moisture condensation Cameras If aibo is brought directly from a cold place to a warm place, moisture may condense Nose camera (1), Loin camera (1) inside or on the surface of it and cause a malfunction of aibo. If moisture condensation has About Software Terminals occurred, leave aibo without turning on the power. Charging pins, SIM card slot Information about aibo’s system software Sound Heat generation Speaker, Microphones (4) By updating the system software, you can add new functions to aibo, improve user • aibo and the supplied AC adapter may generate heat while they are in use. Heat Sensors experience of aibo, and enhance security of aibo. Please use the dedicated app, My aibo, to generation is caused by the operation of internal electric circuits or the electric current keep your aibo updated. 6 axis detection systems (head, torso) (2) When Transferring or Disposing of aibo that flows during battery charge and does not indicate a malfunction. The amount of (3 axis gyro/3 axis acceleration) heat generated by aibo depends on its activity. Information about the third-party software Motion sensor About handling personal information and others • When aibo or the supplied AC adapter is extremely hot to the touch with compared to Ranging sensors (2) The entertainment robot, aibo contains the software that includes software components Before you transfer or dispose of your aibo, you are strongly advised to delete the data, its usual state, press and hold the power button at the back of the neck for 2 seconds to ToF sensor publicly available as the source code or as free software or its derivative granted for including personal information, by selecting [Settings] - [Initialize aibo] from the menu on power off aibo. Unplug the power cord of the AC adapter from the AC outlet. Then, visit Light sensor use under the license agreement imposed by the software right holder other than Sony the dedicated app, My aibo. If you transfer or dispose of your aibo without deleting the the online support page and see the troubleshooting information. Head sensor, Jaw sensor (Capacitive type touch sensor) Corporation (hereinafter referred to as “third-party software”). To use any third-party Back sensor (Pressure sensitive/capacitive type touch sensor) data, the personal information can be viewed and/or used by a third party. On handling the charging station software, you are bind to comply with its license agreement. The license agreement of each Paw pads (4) Note third-party software is provided on the website at the following URL. You are advised to • To let aibo charge its battery on its own on the charging station (self-charging) and Power consumption Sony assumes no liability for any damage or loss that you may suffer as a result of unauthorized visit this website and read each and every license agreement. viewing and/or use of the undeleted data by a third party. get up from there, do not place objects, that may disturb aibo’s activities, around the Approx. 14 W (in standard mode operation) charging station. For more information, refer to the Help Guide. http://oss.sony.net/License/ERS-1000/ Battery life RECYCLING RECHARGEABLE BATTERIES • Do not touch the charge connector with bare hands to avoid causing a bad contact. Approx. 120 minutes (in standard mode operation) Some of the third-party software is applicable to GNU General Public License (GPL) or GNU Rechargeable batteries are recyclable. • Do not exert force on the charging station, for example, by putting your hand or elbow on Dimensions (w/h/d) Lesser General Public License (LGPL) described on the website at the above URL. With You can help preserve our environment by returning your used rechargeable batteries to it. Approx. 180 x 293 x 305 mm (7.1 x 11.5 x 12.0 in.) (not including the protruded parts) compliance to the GPL/LGPL conditions, you are entitled to obtain, alter, and distribute the the collection and recycling location nearest you. • Do not step on or kick the charging station. Mass software code of such software. The software code of each of such software is provided on For more information regarding recycling of rechargeable batteries, visit • Do not exert a strong physical impact on the charging station or drop the station. Approx. 2.2 kg (77.6 oz) the website at the following URL. To download the software code, access the website and www.sony.com/electronics/eco/environmental-management • Do not leave the charging station in a place subject to abnormally high temperatures, select “ERS-1000.” Operating temperature such as inside a closed vehicle parked under the blazing sun, to avoid the risk of 5 °C - 35 °C (41 °F - 95 °F) Caution: Do not handle damaged or leaking Lithium-Ion batteries. deformation or a malfunction of the charging station. http://www.sony.net/Products/Linux/ Communication system • Do not allow the charging station exposed to water. Please be advised that no answer will be provided by Sony to the inquiry concerning the Mobile network communication function (Data transmission): LTE contents of the software code. Wi-Fi: IEEE 802.11b/g/n On charging the battery of aibo • Charge the battery under the condition where the ambient temperature is within the Charging station (Charging stand, Charging mat) range from 5 °C to 35 °C (41 °F to 95 °F). If the temperature is out of this range, the battery may not be fully charged. Power supply 19.5 V DC • While you are charging the battery or using aibo, aibo’s body temperature may rise. This, however, does not indicate a malfunction of aibo. Output voltage 19.5 V DC: 2.3 A (for charging aibo) • Even if you do not intend to use aibo for an extended period of time, charge the battery every 6 months to keep it from deteriorating. Charging time Approx. 3 hours* • If aibo has not been used for an extended period of time, it may take more time to charge the battery. Dimensions (w/h/d) Charging stand: Approx. 171 x 29 x 74 mm (6.7 x 1.1 x 2.9 in.) • If the battery power wears out in about a half of its standard battery life, the battery life Charging mat: Approx. 392 x 24 x 284 mm (15.4 x 0.9 x 11.2 in.) may have come to an end. For replacing the battery, visit the online support page and see the information about battery replacement. Mass Charging stand: Approx. 101 g (3.6 oz) On handling the AC adapter Charging mat: Approx. 466 g (16.4 oz) • Use the supplied AC adapter with the charging station. Use of any AC adapter other than Operating temperature the supplied one will cause a malfunction of aibo. 5 °C - 35 °C (41 °F - 95 °F) • For connecting the AC adapter to a power source, use an AC outlet that is easy to access. * The charging time may vary depending on the condition, such as the activity of aibo or the ambient temperature. When there is an issue with the operation of aibo, immediately unplug the power cord from the AC outlet to cut the power supply. • The supplied AC adapter is exclusively designed for use in USA. Do not use the adapter in AC adapter any other countries or regions, or with any other voltages. Input • Do not connect the AC adapter to an electronic voltage transformer designed for travelers 100 - 240 V AC (100 V AC for the power cord) to avoid the risk of heat generation or a malfunction of the adapter. 50 - 60 Hz, 1.2 A • When you leave home, for example, for vacation and do not intend to use the supplied Output AC adapter for an extended period of time, unplug the power cord from the AC outlet. 19.2 V AC, 2.3 A • The supplied power cord is exclusively designed for aibo’s charging station. It should not Operating temperature be used with any other electric devices. 5 °C - 35 °C (41 °F - 95 °F) (temperature gradient of 10 °C (50 °F)/hour or less) Dimensions (w/h/d) Notes on the Auto photos function of aibo Approx. 92 x 41 x 27 mm (3.62 x 1.61 x 1.06 in.) • Use the Auto photos function in compliance with the moral standards. Mass • Taking photos of others and/or making such photos open to the public may result in a Approx. 165 g (5.8 oz) violation of privacy or portrait rights. Before you take photos of others, be sure to obtain Connection cord length their consent. Power cord: approx. 1 m (39.4 in.) ©2018 Sony Corporation Printed in Japan 4-724-606-21(1) ERS-1000 USGB 4-724-606-21(1)


Document Created: 2019-03-26 17:24:01
Document Modified: 2019-03-26 17:24:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC