Test Report

FCC ID: AJKPN822-0336

Test Report

Download: PDF
FCCID_3796227

849 NW STATE ROAD 45 NEWBERRY, FL 32669 USA PH: 888.472.2424 OR 352.472.5500 FAX: 352.472.2030 EMAIL: INFO@TIMCOENGR.COM HTTP://WWW.TIMCOENGR.COM FCC PART 87 TEST REPORT APPLICANT ROCKWELL COLLINS, INC. 1300 WILSON BLVD. SUITE 200 ARLINGTON VA 22209 USA FCC ID AJKPN822-0336 MODEL NUMBER TPR-901 PRODUCT DESCRIPTION AVIATION TRANSPONDER DATE SAMPLE RECEIVED 11/6/2017 DATE TESTED 11/7/2017 TESTED BY Tim Royer APPROVED BY Sid Sanders TEST RESULTS PASS FAIL Report Version Description Issue Date Number Number 1921AUT17TestReport Rev1 Initial Issue 11/9/2017 1921AUT17TestReport Rev2 Updated 3/23/2018 administrative info THE ATTACHED REPORT SHALL NOT BE REPRODUCED EXCEPT IN FULL WITHOUT THE WRITTEN APPROVAL OF TIMCO ENGINEERING, INC.

TABLE OF CONTENTS GENERAL REMARKS........................................................................................ 3 GENERAL INFORMATION ................................................................................. 4 EUT Specification..................................................................................................... 4 RESULTS SUMMARY ....................................................................................... 5 EMISSION TYPE ............................................................................................. 6 Test Data: 14M0M1D Description .......................................................................... 6 MODULATION CHARACTERISTICS .................................................................... 7 Test Data: 14M0M1D Specifications ....................................................................... 7 RF POWER OUTPUT ........................................................................................ 8 Test Data: Peak Measurement Table ...................................................................... 8 OCCUPIED BANDWIDTH ................................................................................ 10 Test Data: 14M0M1D 99% OBW Plot .................................................................... 12 SPURIOUS EMISSIONS AT ANTENNA TERMINALS (CONDUCTED) ....................... 13 Test Data: 14M0M1D Measurement Table ............................................................. 13 FIELD STRENGTH OF SPURIOUS EMISSIONS ................................................... 14 Test Data: ............................................................................................................ 14 FREQUENCY STABILITY ................................................................................. 15 Test Data: Measurement Table........................................................................... 15 EMC EQUIPMENT LIST .................................................................................. 16 STATE OF THE MEASUREMENT UNCERTAINTY.................................................. 17 Applicant: ROCKWELL COLLINS, INC. Table of Contents FCC ID: AJKPN822-0336 Report: 1921AUT17TestReport_Rev1 Page 2 of 17

GENERAL REMARKS The attached report shall not be reproduced except in full without the written permission of Timco Engineering Inc. Summary The device under test does: Fulfill the general approval requirements as identified in this test report and was selected by the customer. Not fulfill the general approval requirements as identified in this test report Attestations This equipment has been tested in accordance with the standards identified in this test report. To the best of my knowledge and belief, these tests were performed using the measurement procedures described in this report. All instrumentation and accessories used to test products for compliance to the indicated standards are calibrated regularly in accordance with ISO 17025 requirements. I attest that the necessary measurements were made at: Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Tested by: Name and Title: Tim Royer, Project Manager/Testing Engineer Date: 11/9/2017 Reviewed and approved by: Name and Title: Sid Sanders, Engineer Date: 11/10/2017 Applicant: ROCKWELL COLLINS, INC. Table of Contents FCC ID: AJKPN822-0336 Report: 1921AUT17TestReport_Rev1 Page 3 of 17

GENERAL INFORMATION EUT Specification EUT Description AVIATION TRANSPONDER FCC ID AJKPN822-0336 Model Number TPR-901 Operating Frequency 1090 MHz-1090 MHz Test Frequencies 1090 MHz Emission Designator 14M0M1D Type of Emission Pulse Modulation PM, DPSK 115Vac/400 Hz EUT Power Source DC Power Battery Operated Exclusively Prototype Test Item Pre-Production Production Fixed Type of Equipment Mobile Portable The temperature was 26ºC with a relative humidity of Test Conditions 50%. Atmospheric Pressure: 30.01” Revision History to the None EUT The EUT was placed in continuous transmit mode Test Exercise running ATCRBS and Mode-S simultaneously. Applicable Standards ANSI/TIA 603-E:2016, FCC CFR 47 Part 87 Timco Engineering Inc. 849 NW State Road 45 Test Facility Newberry, FL 32669 USA. Designation #: US1070 Applicant: ROCKWELL COLLINS, INC. Table of Contents FCC ID: AJKPN822-0336 Report: 1921AUT17TestReport_Rev1 Page 4 of 17

RESULTS SUMMARY FCC Rule Part Requirement Result 2.201, 87.137 Emission Types Pass 2.1047, Modulation Characteristics Pass 87.141 2.1046, RF Power Output Pass 87.131 2.1049, 87.135, Occupied Bandwidth Pass 87.139 2.1051, Spurious Emissions at Antenna Terminals Pass 87.139 2.1053, Field Strength of Spurious Emissions Pass 87.139 2.1055, Frequency Stability Pass 87.133 Applicant: ROCKWELL COLLINS, INC. Table of Contents FCC ID: AJKPN822-0336 Report: 1921AUT17TestReport_Rev1 Page 5 of 17

EMISSION TYPE Rule Part No.: Part 2.201, Part 87.137 Requirements: The assignable emissions, corresponding emission designators and authorized bandwidths are as listed in the rule part 87.137(a) Test Data: 14M0M1D Description Mode S and ATCRBS, avionics transponder The emission designator is defined in the referenced aviation standards, and defined in part 87.137(a) is 14M0M1D Applicant: ROCKWELL COLLINS, INC. Table of Contents FCC ID: AJKPN822-0336 Report: 1921AUT17TestReport_Rev1 Page 6 of 17

MODULATION CHARACTERISTICS Rule Part No.: Part 2.1047, Part 87.141, Requirements: A curve or equivalent data shall be submitted The EUT complies with the following characteristics which are defined in the aviation standards and regulations referenced above in this report. The requirements of 47CFR 2.1047 and applicable paragraphs of Part 87.141 are met. There are no deviations to the specifications. Test Data: 14M0M1D Specifications Pulse Type Specification Data Unit Mode-A/C Rise Time (10%/90%) 0.1 us Mode-A/C Fall Time (90%/10%) 0.2 us Mode-A/C Pulse Width 0.45 ± 0.1 us Results meet requirements Applicant: ROCKWELL COLLINS, INC. Table of Contents FCC ID: AJKPN822-0336 Report: 1921AUT17TestReport_Rev1 Page 7 of 17

RF POWER OUTPUT Rule Part No.: Part 2.1046, Part 87.131 Requirements: Manufacturers Specifications Procedure: RF power is measured by connecting a 50-ohm, resistive wattmeter to the RF output connector. With a nominal battery voltage and the transmitter properly adjusted the RF output measures: For the Device has a fixed antenna, RF power is measured as ERP as the antenna is permanently attached. The substitution method was used. With a nominal battery voltage and the transmitter properly adjusted the RF output measures: Setup Diagram: Test Data: Peak Measurement Table Tuned Freq Pconducted Pconducted (MHz) (dBm) (W) 1090 55.72 373.3 Applicant: ROCKWELL COLLINS, INC. Table of Contents FCC ID: AJKPN822-0336 Report: 1921AUT17TestReport_Rev1 Page 8 of 17

RF OUTPUT POWER Test Data: 14M0M1D Plot Applicant: ROCKWELL COLLINS, INC. Table of Contents FCC ID: AJKPN822-0336 Report: 1921AUT17TestReport_Rev1 Page 9 of 17

OCCUPIED BANDWIDTH Rule Part No.: 2.1049, 87.135, 87.135, 87.139 Test Requirements: see below 14M0M1D: (1) When the frequency is removed from the assigned frequency by more than 50 percent up to and including 100 percent of the authorized bandwidth the attenuation must be at least 25 dB; (2) When the frequency is removed from the assigned frequency by more than 100 percent up to and including 250 percent of the authorized bandwidth the attenuation must be at least 35 dB. (3) When the frequency is removed from the assigned frequency by more than 250 percent of the authorized bandwidth the attenuation for aircraft station transmitters must be at least 40 dB; and the attenuation for aeronautical station transmitters must be at least 43 + 10 log10 pY dB. Method of Measurement: as referenced above Test Setup Diagram: The authorized BW is 14 kHz. Applicant: ROCKWELL COLLINS, INC. Table of Contents FCC ID: AJKPN822-0336 Report: 1921AUT17TestReport_Rev1 Page 10 of 17

Test Data: Applicant: ROCKWELL COLLINS, INC. Table of Contents FCC ID: AJKPN822-0336 Report: 1921AUT17TestReport_Rev1 Page 11 of 17

OCCUPIED BANDWIDTH Test Data: 14M0M1D 99% OBW Plot Applicant: ROCKWELL COLLINS, INC. Table of Contents FCC ID: AJKPN822-0336 Report: 1921AUT17TestReport_Rev1 Page 12 of 17

SPURIOUS EMISSIONS AT ANTENNA TERMINALS (CONDUCTED) Rule Part No.: Part 2.1051, 87.139 Requirements: see below 14M0M1D: When the frequency is removed from the assigned frequency by more than 250 percent of the authorized bandwidth the attenuation for aircraft station transmitters must be at least 40 dB; and the attenuation for aeronautical station transmitters must be at least 43 + 10 log10 pY dB. Method of Measurement: The carrier was modulated 100% using a 2500 Hz tone. The spectrum was scanned from 0.4 to at least the 10th harmonic of the fundamental. The measurements were made in accordance with standard TIA/EIA- 603. Test Data: 14M0M1D Measurement Table dBm Watts Limit (dBc) Power Output 55.72 373.25 68.72 Frequency dBc Margin (fundamental) 1090.000 0.00 0.00 * 2180.000 87.89 19.17 * 3270.000 86.57 17.85 * 4360.000 86.57 17.85 * 5450.000 86.57 17.85 * 6540.000 87.42 18.70 * 7630.000 87.42 18.70 * 8720.000 88.17 19.45 * 9810.000 88.17 19.45 * 10900.000 88.17 19.45 * Indicates Noise Floor Applicant: ROCKWELL COLLINS, INC. Table of Contents FCC ID: AJKPN822-0336 Report: 1921AUT17TestReport_Rev1 Page 13 of 17

FIELD STRENGTH OF SPURIOUS EMISSIONS Rule Parts. No.: Part 2.1053 Test Requirements: The FCC limits for radiated emissions are the same as previously stated for the conducted emissions. Method of Measurements: The spectrum was scanned from 9 KHz to at least the tenth harmonic of the fundamental. This test was conducted per TIA/EIA STANDARD 603 using the substitution method. Test Setup Diagram: Transmitter Spectrum under Test Analyzer 3 meters Signal Generator Test Data: Limit dBm Watts Power Output (dBc) 50.18 104.23 70.18 Tuned Emission Antenna Freq Frequency Margin Polarity MHz MHz erp (dBmW) 1090.00 2180.00 V -55.0592 35.06 1090.00 3270.00 H -52.8452 32.85 1090.00 4360.00 H -52.8752 32.88 1090.00 5450.00 H -50.6672 30.67 1090.00 6540.00 H -50.4212 30.42 1090.00 7630.00 H -48.9632 28.96 1090.00 8720.00 H -48.3092 28.31 1090.00 9810.00 H -45.6022 25.60 1090.00 10900.00 H -44.6372 24.64 Applicant: ROCKWELL COLLINS, INC. Table of Contents FCC ID: AJKPN822-0336 Report: 1921AUT17TestReport_Rev1 Page 14 of 17

FREQUENCY STABILITY Rule Parts. No.: Part 2.1055, Part 87.133 Requirements: Temperature range requirements: -30 to +50º C. Voltage Variation +, -15% ±1000 PPM Method of Measurements: TIA/EIA Specification 603 Test Data: Measurement Table Frequency Temperature MHz Hz PPM 25°C (reference) 1090040.064 -30°C 1090016.064 -24000000 -22.018 -20°C 1090016.025 -24039000 -22.053 -10°C 1090016.026 -24038000 -22.052 0°C 1090016.026 -24038000 -22.052 10°C 1090016.026 -24038000 -22.052 20°C 1090017.628 -22436000 -20.583 30°C 1090011.218 -28846000 -26.463 40°C 1090001.603 -38461000 -35.284 50°C 1089995.192 -44872000 -41.165 Battery Voltage Frequency Hz PPM -15% 1090040.064 0 0.000 15% 1090040.064 0 0.000 Applicant: ROCKWELL COLLINS, INC. Table of Contents FCC ID: AJKPN822-0336 Report: 1921AUT17TestReport_Rev1 Page 15 of 17

EMC EQUIPMENT LIST Device Manufacturer Model Serial Number Cal/Char Date Due Date Coaxial Cable - Belden BMBM-0065-01 07/18/16 07/18/18 BMBM-0065-01 Black DC-2G Antenna: Eaton 94455-1 1096 08/01/17 08/01/19 Biconical 1096 Antenna: Log- Electro-Metrics LPA-25 1122 07/26/17 07/26/19 Periodic 1122 Temperature Tenney TTRC 11717-7 09/01/16 09/01/18 Chamber LARGE Engineering Coaxial Cable - Micro-Coax Chamber 3 cable KMKM-0244-02 NA NA Chamber 3 cable set (backup) ; KMKM-0670- set (backup) 01; KFKF-0197- 00 CHAMBER Panashield 3M N/A 04/25/16 12/31/17 Sweep/Signal Anritsu 68369B 985112 10/28/15 11/28/17 Generator Antenna: ETS-Lindgren 3117 00041534 03/01/17 03/01/19 Double-Ridged Horn/ETS Horn 2 Software: Field Timco N/A Version 4.10.7.0 NA NA Strength Program Antenna: Active ETS-Lindgren 6502 00062529 11/18/15 11/18/17 Loop EMI Test Rohde & ESU 40 100320 04/01/16 04/01/18 Receiver R & S Schwarz ESU 40 Chamber Non Radiating Sierra Elec 160B-600X 1038 09/13/16 09/13/18 50 OHM Load Attenuator N Narda 777C 36124 05/24/17 05/23/19 20dB 2W DC- 13G Bore-sight Sunol Sciences TLT2 N/A NA NA Antenna Positioning Tower High Pass Filter Microlab HA-20N 06/17/15 11/17/17 980MHz *EMI RECEIVER SOFTWARE VERSION The receiver firmware used was version 4.43 Service Pack 3 Applicant: ROCKWELL COLLINS, INC. Table of Contents FCC ID: AJKPN822-0336 Report: 1921AUT17TestReport_Rev1 Page 16 of 17

STATE OF THE MEASUREMENT UNCERTAINTY The data and results referenced in this document are true and accurate. The measurement uncertainty was calculated for all measurements listed in this test report according To CISPR 16–4 or ENTR 100-028 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4: “Uncertainty in EMC Measurements” and is documented in the Timco Engineering, Inc. quality system according to DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Hereafter the best measurement capability for Timco Engineering, Inc. is reported: Test Items Measurement Notes Uncertainty RF Frequency Accuracy ± 49.5 Hz (1) RF Conducted Power ±0.93dB (1) Conducted spurious emission of ±1.86dB transmitter valid up to 40GHz Occupied Bandwidth ±2.65% Audio Frequency Response ±1.86dB Modulation limiting ±1.88% Radiated RF Power ±1.4dB Maximum frequency deviation: Within 300 Hz and 6kHz of audio freq. ±1.88% Within 6kHz and 25kHz of audio Freq. ±2.04% Rad Emissions Sub Meth up to 26.5GHz ±2.14dB Adjacent channel power ±1.47dB (1) Transient Frequency Response ±1.88% Temperature ±1.0°C (1) Humidity ±5.0% This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=1.96. END OF REPORT Applicant: ROCKWELL COLLINS, INC. Table of Contents FCC ID: AJKPN822-0336 Report: 1921AUT17TestReport_Rev1 Page 17 of 17


Document Created: 2019-10-21 22:24:55
Document Modified: 2019-10-21 22:24:55
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC