MPE Calculation

FCC ID: AFJ382500

RF Exposure Info

Download: PDF
FCCID_4423288

RF Exposure Report Report No.: FCC_RF_SL19041701-SEV-040_MPE_Rev1.0 FCC ID: AFJ382500 Test Model: IP501M Issued Date: 08/15/2019 Applicant: ICOM Incorporated Address: 1-1-32 Kamiminami Hirano-ku Osaka 547-0003 Japan Manufacturer: ICOM Incorporated Address: 1-1-32 Kamiminami Hirano-ku Osaka 547-0003 Japan Issued By: Bureau Veritas Consumer Products Services, Inc. Lab Address: 775 Montague Expressway, Milpitas, CA 95035 Test Location (1): 775 Montague Expressway, Milpitas, CA 95035 FCC Registration / 540430 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any government agencies. Report No.: FCC_RF_SL19041701-SEV-040_MPE_Rev1.0 Page No. 1 / 6 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 5 2.5 Calculation Result Of Maximum Conducted Power ............................................................................ 6 Report No.: FCC_RF_SL19041701-SEV-040_MPE_Rev1.0 Page No. 2 / 6 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued FCC_RF_SL19041701-SEV-040_MPE Orignal Release 07/19/2019 FCC_RF_SL19041701-SEV-040_MPE_Rev1.0 Updated as per reviewer’s comments 08/15/2019 Report No.: FCC_RF_SL19041701-SEV-040_MPE_Rev1.0 Page No. 3 / 6 Report Format Version: 6.1.1

1 Certificate of Conformity Product: IP Advanced Radio System Brand: Icom Test Model: IP501M Sample Status: ENGINEERING SAMPLE Applicant: ICOM Incorporated Test Date: 06/27/2019 – 06/08/2019 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 The above equipment has been tested by Bureau Veritas Consumer Products Services, Inc., Milpitas Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: 08/15/2019 Rachana Khanduri / Test Engineer Approved by : , Date: 08/15/2019 Chen Ge / Engineer Reviewer Report No.: FCC_RF_SL19041701-SEV-040_MPE_Rev1.0 Page No. 4 / 6 Report Format Version: 6.1.1

2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f2)* 30 30-300 27.5 0.073 0.2 30 300-1500 … … f/1500 30 1500-100,000 … … 1.0 30 f = Frequency in MHz; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Antenna Gain BT: Chip Antenna, -6.5dBi Gain WCDMA: Passive Antenna, 0dBi Gain LTE (Band 2, Band 4, Band 12): Passive Antenna, 0dBi Gain Report No.: FCC_RF_SL19041701-SEV-040_MPE_Rev1.0 Page No. 5 / 6 Report Format Version: 6.1.1

2.5 Calculation Result of Maximum Conducted Power Tolerance CH Conducted Antenna Measurement Calculated MPE Tune-Up Max Pass Freq Power Gain Distance MPE Limit Type Tolerance Power / (MHz) (dBm) (dBi) (cm) (mW/cm2) (mW/cm2) (dBm) Fail BT 2402 5.03 -6.5 ±1dB 6.03 20 0.00018 1 Pass (3DH5) WCDMA 1850 24.79 0 ±1dB 25.79 20 0.0755 1 Pass (Band II) WCDMA 824 24.82 0 ±1dB 25.82 20 0.0760 0.549 Pass (Band V) LTE 1850.0 22.98 0 ±1dB 23.98 20 0.0498 1 Pass (Band II) LTE 1755.0 23.32 0 ±1dB 24.32 20 0.0538 1 Pass (Band IV) LTE (Band 699.0 21.91 0 ±1dB 22.91 20 0.0389 0.466 Pass XII) Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density If BT and LTE/WCDMA transmit simultaneously; Bluetooth = (0.00018/1) x 100 = 0.02 % WCDMA (Band II) = (0.0755/ 1) x 100 = 7.55 % WCDMA (Band V) = (0.0760 / 0.549) x 100 = 13.84 % LTE (Band II) = (0.0497 / 1) x 100 = 4.97 % LTE (Band IV) = (0.0538 / 1) x 100 = 5.38 % LTE (Band XII) = (0.0389 / 0.466) x 100 = 8.35 % Total MPE Percentage (Worst case) = 0.02 + 13.84 = 13.86 %< 100% The Above Result had shown that the Device complied with MPE requirement. --- END --- Report No.: FCC_RF_SL19041701-SEV-040_MPE_Rev1.0 Page No. 6 / 6 Report Format Version: 6.1.1


Document Created: 2019-09-03 22:22:32
Document Modified: 2019-09-03 22:22:32
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC