Accessory Specs

FCC ID: AFJ307802

Users Manual

Download: PDF
FCCID_1268490

INSTRUCTIONS ACC ADAPTER Thank you for purchasing the AD-118 acc AD-118 adapter. Please read these instructions thorough- ly before using the AD-118. SUPPLIED ACCESSORY Ferrite core (See the back page for details.) PRECAUTIONS DESCRIPTION CAUTION: NEVER expose the adapter and Socket cover the connected transceiver to rain, snow or q any liquids. w NEVER disassemble the adapter. The adapt- er contains no user-serviceable parts. DO NOT use harsh solvents such as ben- zine or alcohol to clean the adapter, because e they can damage the adapter’s surfaces. BE SURE to attach the socket cover when the accessory is not connected. q ACCESSORY SOCKET Connects to the recommended acces- Use only the recommended accessories*. sories. Connection to other equipment may cause See the back page for details of the rec- problems, such as; ommended accessories, pin assign- • Audio does not output correctly. ments and connections. • The transceiver does not detect the con- nected accessory. w PTT SWITCH • The PTT switch of the connected acces- Hold down to transmit; release to receive. sory is disabled. • While holding down this switch, speak into *See the back page for details of the recom- the microphone of the accessory at a nor- mended accessories. mal voice level. e CONTACT PINS Icom, Icom Inc. and the Icom logo are registered Contacts with the transceiver’s multi trademarks of Icom Incorporated (Japan) in Japan, connector. the United States, United Kingdom, Germany, See the back page for details of the pin France, Spain, Russia and/or other countries. assignments and connections.

PIN ASSIGNMENTS AND CONNECTIONS AD-118 Transceiver Accessory socket Contact pins Multi connector t y q e w o y i r Front u y q t w r e w q (Top panel view) (Side panel view) (Side panel view) AD-118 Transceiver q w External Mic. input 2.2 kø w i External Mic. power 5.1 V 1 ½F e o External Speaker (+) r y Ground t q External PTT input y u ACC detection FERRITE CORE ATTACHMENT The ferrite core that comes with the AD-118 must be attached to the headset side cable of the V4-BA2MD1, as close to the PTT switch as possible. It is not necessary to attach the ferrite core to the V4-10148 and V4-10001. PTT Switch Ferrite core Make sure to twist the cable around the ferrite core. To the AD-118 To the Headset RECOMMENDED ACCESSORIES • V4-10148 : Noise cancelling over-the-head headset • V4-10001 : Noise cancelling behind-the-head headset • V4-BA2MD1 : Light weight behind-the-head headset 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan. A-6827X-1EX Printed in Taiwan © 2010 Icom Inc.


Document Created: 2010-04-06 10:35:18
Document Modified: 2010-04-06 10:35:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC