Test Data

FCC ID: AEZM904

Test Report

Download: PDF
FCCID_226795

Attachment#1 REPORT OF MEASUREMENTS (MICROWAVE OVEN TEST DATA) FCC ID : AEZMOONA MODEL : _EM—Z9011N DATE : February6.2002 NOMINAL FREQUENCY : _MIHz. TESTED BY : n \ DESCRIPTION : (Unit Dimension : cm) Cabinet Dimension : 76.0 by 35.7 hy 48.2 Door Dimension :__&7.7 by 83.3 Oven Cavity Dimension: 48.9 hy 345 hy 25.5 Door Viewing arca: 44.0. by20.8 Feed Type and Location : Waveguide, located top side Stirrer: rotating tray (incl.Rotating tray) Door seal Type: Choke Sea Magnetron Type ‘Toshiba.2M—253H (M) —N Others : N/A TEST EQUIPMENT USED : 1. Antenna (Horn Antenna) Frequency Range Correction Factor AILTECH 91888—2 1.0 — 2.0 G Hz 21.5 — 22 dB ATLTECH 91889—2 2.0 —3.6 G Hz 20.5 — 21 dB AILTECH 94813—1 3.6 —7.6 G Hz 37 dB AILTECH 91891—2 7.3 —10.0 G Hz 39.8 dB Other Correction Factor (a) Cable loss Frequency (M [z) Cable loss (dB) 2,400 1.1 2,500 1.1 4,900 1.6 7,350 2.2 9,800 2.7 (b) Loss of Band Rejection Filter Frequency Range (G Hz) Filter loss (dB) 2.0 — 3.6 8.0 Field Strength Meter AILTECH NM—67 (SER 0241—03088) Last calibrated date : 14. Setting : Bandwidth 1 MHz Function Field Intensity (average value detector) When measureing sidebands close to the fundamental, band reject filter Model 6N45—2450/60 (SER FK837—1) was employed.

ATTACHMENT #1A REPORT OF MEASUREMENT (MICROWAVE OVEN TEST DATA SHEET B) FCC ID : AEZM9O4 MODEL : EM—Z901 1N DATE : February 6,2002 Nominal Frequency : 2450 MHz TESTED BY : M ESHIRO DATA SUMMERRY (FGG MEASUREMENT PROCEDURE MP—5) Imo CALCULATION : EC300m» = @10(A+B+G+D+R)/20) SAFETY CHECK (at 5 om) Load : 275 ml/center 0.20 mW/sq.om FUNDAMENTAL Load : 1,000 inl/center 2450 MHz. LIMT = 25#,"(power/500) : 34.5 uV/m * Note: Location of load for the oven provided with therotating tray is : Contiguous with the shelf circumference. RADIATION FIELD STRENGTH (uV/m at 300 m) amom—Emmrpphprorre (mP Cutie) GBuW) (a8) (B) (a8) GB) (E<BoOm>=KeECGm®)] (uV/m at 300m) (u¥/m at 300m) Znd Harmonic _|_300 Genter 4916 120 310 18 — s .o100 e0 go Znd Harmonic 300 * Right/Front Gomer 4,900 100 a0 is — s a0100 48 as Znd Harmonic 700 Genter 4920 150 s0 is — 5 0100 a5 345 Znd Harmonic 700 * Right/Front Goner 4,918 80 s10 16 — s no100 43 35 3rd Harmonic 300 Genter 8295 10 sas 22 — 5 no10o 79 s __| 3rd Harmonic 300 * Right/Front Gomner 8,220 To sas 22 — 5 00100 79 35 Ird Harmonic 700 Genter 8.288 110 zes 22 — s 10100 79 35 Srd Harmonic 700 * Right/Front Gomer |_8,288 o ses 22 — 5 00100 To a5 Ath Harmonic 700 Genter azei 130 ses 271 — s 10100 Tos ge Spurious Too Genter 2386 220 zos 11 3 5 a.oos1 24 x5 *chooie"| 199 Center 2400 170 ros 14 3 5 o.0061 13 x5 Em'szf's"(;‘osr;ld::“"d o0 CGenter 2500 130 ros q4 3 5 0054 as s45 Maximum Frequency Variation 1,000 ml load 2443 to 2447 M He. 1880 MHz — 2745 MHz 26230 * 10°(—3) * frequency : GHz) —0.0002 Total Power Input to Oven 1500 _Watts 2745 MHz — 3660 MHz 21858# 10"(~3) + frequency : GHz) +0.0010 Power Developmentin dummy load (Thermal Method) 950 Watts (IEGTOSTest Procedure) 3660 MHz — 4575 MHz 1.0928 * 10"(—3) # frequency : GHz) +0.0050 Supply Voltage AC 120 V 60 He 4575 MHz and above 00100

Attachment#1B FCCID : _AEZM9M.____ MODEL : _EM—Z9011N DATE : February6.2002 TRSTED BY : %&L Note : In order to convert the measuredfield strength at 3meters to the field at 300 meters, comply with FCC/OST MP—5 Appendix C "4.6.1 Computations to determine compliance". A culculation factor of 5 dB, this figure is fixed by SANYO, is introduced for adjusting a tolerance in measurement. A calculation factor of 5 dB should be added to "METER READING"® as shown in SAMPLE CALCULATION below. SAMPLE CALUCULATION (1) 2» Harmonic with 300 ml/Center load Field Strength at 300 m 0.0100 x 10 az0+sat+1e+s) / 2o 1 6.0 uV/m (2) Emission sideband2,400 M Hz., 700 mUCenter load Field Strength at 300 m = 0.0061 X 10G10+28s+11+3+5) // so 1.3 uV/m

Aftachment #1C REPORT OF MEASUREMENT (MICROWAVE OVEN TEST DATA) — Measurement of Frequency VS Line Voltage Stability — FCC ID : AEZM2O4 Model: _EM—Z901IN.__ Date: Feb.6.2002 Nominal Frequency : 2,450 MHz Tested by : M.KANESHIRO J iz Line Voltage Frequency Deviation for ISM Limit Varlation [GHz] Frequency [MHz] [MHz] [Volf] 96 (— 20%) 2442 —8 + 50 120 (+ 0%) 2443 —7 + 50 150 (+25%) 2.446 —4 + 50 [ Environment ] Temperature : 16.0 °C Humidiity : 58.0 % [Sample Calculation ] Frequency : 2.442 GHz Deviation for ISM Frequencies Calculated as follows, 2442 — 24500 = _—0.008 [GHz]) = _8 [MHz] [ Summary of Test Results } Above data shows that the fest device é;)z do not complies with the requirements.


Document Created: 2019-11-18 00:07:23
Document Modified: 2019-11-18 00:07:23
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC