User Manual

FCC ID: ADM-AP-701C

Users Manual

Download: PDF
FCCID_3963156

              

AP—701C Spec. AP—701C Detail Support Get to know your new AP—701C For more information or help [FCC part 15 Rules] Congratulations on your purchase of AP—701C. You are now Status Light This device complies with part 15 of the FCC Rules. Operation is subject to the following two just a few steps away from smart writing and being able to conditions: write live. & Sound (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause Pen uses multicolor LED and undesired operation. IMPORTANT: Depending on how long the pen has been sound buzzer to communicate Micro USB Port stored, the battery level may be low when you receive it. status information. [Caution] To avoid any problems, please charge your pen as soon as Power On mm 4) Steady THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT possible. Power Off [___] ) Off EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER‘S AUTHORITY TO OPERATE THE EQUIPMENT. Discoverable _L Blinking Technical specifications _ Pen ID [RF exposure] Connecting LILHI Blinking IMPORTANT NOTE : FCC RF Radiation Exposure StatementThis equipment complies with Model name AP—701C Connected [______ Steady Here you will find the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment Memory capacity 4MB (On board type) Pen ID that uniquely should be installed and operated with a minimum distance of 0.5 centimeters between the Built—in battery Lithium polymer (rechargeable) Low battery zox NNNE Blinking identifies the pen, radiator and your body. This transmitter must not be co—located or operating in conjunction Writing time Up to 10 hours of continuous writing Critical battery iox EENNKN «6 Blinking along with the with any other antenna or transmitter. Standby time Up to 10 days required regulatory Memory full mm ©) Steady Charging time Up to 2 hours (when connected to a PC via USB) information. [ISED(IC)] ®@ Aegir Smartpen — Data connection Bluetooth Dual Mode 4.2(COMBO), USB 2.0 Error* REB © Blinking ISED(IC) Information to User Operating temperatures O°C to 40°C / 32°F to 104°F Charging HEAA Blinking This device complies with Industry Canada‘s licence—exempt RSSs. Operation is subject to MMI Green / Blue / Red / Yellow / Magenta LED Lamp the following two conditions: Fully Charged M Steady (1) This device may not cause interference; and (2) This device must accept any interference, with Buzzer Sound Sleep ____] Off including interference that may cause undesired operation of the device IR camera 75 fps Le présent appareil est conforme aux CNR d‘Industrie Canada applicables aux appareils Ink D—1 Standard Type 1mm black ballpoint Wakeup [ Steady radio exempts de licence. L‘exploitation est autorisée aux deux conditions suivantes : (1) Weight 18 grams l‘appareil ne doit pas produire de brouillage, et DimensIOns with cap 152.5mm (L) x 12.5mm (D) * Error occurs when you write on a locked pattern (2) l‘utilisateur de l‘appareil doit accepter tout brouillage radiogélectrique subi, méme (not regular paper), write when pen is connected to without cap 150mm (L) x 10.5mm (D) si le brouillage est susceptible d‘en compromettre le fonctionnement. power source, enter incorrect encryption, bluetooth connection failure, etc. Camera Power management A The pen uses an AP—701C has no power button! The device has been engineered to Ink infrared camera to efficiently manage battery performance and maximize user experience. record its position Standard D—1 Type Black on the paper. Do not Power ON AP—701C can be powered ON by connecting the pen with the USB cable to a computer. ball—point ink refill. block the lens while writing. Sleep mode Device enters sleep mode when it is idle for 40 seconds. Take extra care of Pen cap this part of the pen. Wake—up On touch down! AP—701C starts capturing data Y¥ as soon as you start writing with it, thereby FEsz——CE6 & A Always re—attach the eliminating the possibility of missed strokes. pen cap after use Power OFF Device powers itself OFF when the battery level is to protect the ink at 5% battery level. Pen needs to be charged cartridge tip and IC : 23775—AP7O1C in order to turn it back ON. camera lens. This guide contains important information. Please keep it for future reference Charging/Data transfer USB cable that is provided along with the pen can be used ©2017 Anoto AB. All rights reserved. Anoto and Anoto logo are trademarks Do you want to learn more about the Anoto technology? owned by Anoto AB, Lund, Sweden. Third—party trademarks mentioned for charging and data transfer. Visit our homepage at www.anoto.com are the property of their respective owners.


Document Created: 2018-08-14 12:29:30
Document Modified: 2018-08-14 12:29:30
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC