C2PC Letter

FCC ID: ACJ9TGWW18A

Cover Letter(s)

Download: PDF
FCCID_4110395

                                                           Ben Botros, Project Manager
                                                           Product Safety and Compliance Department




                                       Class II Permissive Change Letter

                                                                                                      October 19, 2018
                                                                                                       MSBD-18-F004
Federal Communications Commission
Authorization and Standards Division
7435 Oakland Mills Road
Columbia, MD 21046 USA

Subject:     Class II Permissive Change Application for Panasonic Single Modular,
             Model WW18A under FCC ID: ACJ9TGWW18A Certified Under FCC Parts 22H, 24E, 27 and 90
             For Installation within Panasonic Personal Computer, Model CF-33 (mk1 series)

To whom it may concern:

Pursuant to CFR§2.1043, Panasonic Corporation of North America hereby requests a Class II Permissive
Change for its application with FCC ID: ACJ9TGWW18A.

This authorization only covers the Class II permissive change application for the following changes:

   Output power setting was reduced from 23.8 dBm to 23 dBm by firmware change in LTE B7 and
    B41 to be equipped into the Panasonic PC.

   Mobile to Portable Classification due to Installation into Panasonic PC (Model: CF-33)

   This module used in the Host PC CF-33 has the power reduction mode which is specially
    programmed and tuned by proximity sensor to operate at a lower power setting than the original
    maximum power to ensure that the output power does not exceed the targets described in the SAR
    report.

   Collocation with Wireless Module Model: WL16A with pre-existing FCC ID: ACJ9TGWL16A,
    whose SAR test data is included in this application.

   The Host PC CF-33 doesn’t support LTE band 30 which is disabled by Software at the factory.

   No other radio parameters have been changed.



Sincerely,



Ben Botros
Project Manager
Panasonic Corporation of North America
Product Safety & Compliance Department




                                         Panasonic Corporation of North America
                                 Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490
                                 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com



Document Created: 2018-11-13 13:03:45
Document Modified: 2018-11-13 13:03:45

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC