Attestations_20180530_v1 - Attestation letter ACJ9TGWW16D in FZ-G1

FCC ID: ACJ9TGWW16D

Cover Letter(s)

Download: PDF
FCCID_3881506

Ben Botros, Project Manager Product Safety and Compliance Department Attestation Letter April 3, 2018 MSBD-17-F011 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Re: Class II Permissive Change Application for Panasonic Single Modular Model WW16A under FCC ID: ACJ9TGWW16D / Certified Under FCC Parts 22H, 24E, 27 and 90 For Installation within Panasonic Personal Computer Model FZ-G1(mk5 series) To whom it may concern: We, Panasonic Corporation of North America performed SAR test to mount the module WW16A into the portable host (Panasonic PC Model FZ-G1). The radiated emission testing was not additionally performed due to the following reasons:  The original FCC testing of the module WW16A was performed when the antenna was connected to the module in an open environment. Under this application, the WW16A itself and its antennas installed inside the host PC enclosure. The physical restraints introduced by the host PC enclosure should have resulted in equal or lower level of radiated emission.  The original FCC testing of the module WW16A was performed with an antenna of higher gain: 699 MHz - 716 MHz: 6dBi 777 MHz - 787 MHz: 6dBi 814 MHz - 849 MHz: 6dBi 1710 MHz -1755 MHz: 6dBi 1850 MHz -1915 MHz: 6dBi 2500 MHz -2570 MHz: 9dBi 2496 MHz -2690 MHz: 9dBi Sincerely, Ben Botros Project Manager Panasonic Corporation of North America Product Safety & Compliance Department Panasonic Corporation of North America Two Riverfront Plaza, 9th Floor, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / Ben.Botros@us.panasonic.com


Document Created: 2018-05-23 17:51:59
Document Modified: 2018-05-23 17:51:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC