17.2 SAR test plots

FCC ID: ACJ9TGWW16C

RF Exposure Info

Download: PDF
FCCID_3904957

17.2 SAR test plots WCDMA Band2 Edge2 0mm RMC12.2k 1907.6MHz power reduction Communication System: UID 0, WCDMA (0); Communication System Band: Band II; Frequency: 1907.6 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1907.6 MHz; σ = 1.561 S/m; εr = 53.106; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3825; ConvF(8, 8, 8); Calibrated: 2017/12/11; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn509; Calibrated: 2017/07/11 Phantom: ELI v4.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1045 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) WCDMA B2/Edge2/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.68 W/kg WCDMA B2/Edge2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 28.44 V/m; Power Drift = 0.18 dB Peak SAR (extrapolated) = 1.98 W/kg SAR(1 g) = 0.794 W/kg; SAR(10 g) = 0.323 W/kg Maximum value of SAR (measured) = 1.28 W/kg Date: 2018/02/21 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 1

WCDMA Band2 Edge2 15mm RMC12.2k 1880MHz Communication System: UID 0, WCDMA (0); Communication System Band: Band II; Frequency: 1880 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.483 S/m; εr = 51.023; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(8.04, 8.04, 8.04); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) WCDMA B2/Edge2/Area Scan 2 (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.851 W/kg WCDMA B2/Edge2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 23.76 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 1.02 W/kg SAR(1 g) = 0.617 W/kg; SAR(10 g) = 0.336 W/kg Maximum value of SAR (measured) = 0.810 W/kg Date: 2018/03/06 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 2

WCDMA Band4 Edge2 0mm RMC12.2k 1752.6MHz power reduction Communication System: UID 0, WCDMA (0); Communication System Band: Band IV; Frequency: 1752.6 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1752.6 MHz; σ = 1.493 S/m; εr = 53.105; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3825; ConvF(8.29, 8.29, 8.29); Calibrated: 2017/12/11; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn509; Calibrated: 2017/07/11 Phantom: ELI v4.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1045 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) WCDMA B4/Edge2/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.63 W/kg WCDMA B4/Edge2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 31.58 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 2.12 W/kg SAR(1 g) = 0.928 W/kg; SAR(10 g) = 0.392 W/kg Maximum value of SAR (measured) = 1.45 W/kg Date: 2018/02/16 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 3

WCDMA Band4 Edge2 15mm RMC12.2k 1752.6MHz Communication System: UID 0, WCDMA (0); Communication System Band: Band IV; Frequency: 1752.6 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1752.6 MHz; σ = 1.443 S/m; εr = 52.702; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(8.3, 8.3, 8.3); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) WCDMA B4/Edge2/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.448 W/kg WCDMA B4/Edge2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 17.94 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.537 W/kg SAR(1 g) = 0.330 W/kg; SAR(10 g) = 0.181 W/kg Maximum value of SAR (measured) = 0.444 W/kg Date: 2018/03/07 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 4

WCDMA Band5 Edge1 0mm RMC12.2k 846.6MHz power reduction Communication System: UID 0, WCDMA (0); Communication System Band: Band V; Frequency: 846.6 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 846.6 MHz; σ = 1.019 S/m; εr = 53.856; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(9.93, 9.93, 9.93); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) WCDMA B5/Edge1/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.02 W/kg WCDMA B5/Edge1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 34.27 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 2.80 W/kg SAR(1 g) = 0.825 W/kg; SAR(10 g) = 0.330 W/kg Maximum value of SAR (measured) = 1.58 W/kg Date: 2018/02/21 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 5

WCDMA Band5 Edge2 15mm RMC12.2k 836.6MHz Communication System: UID 0, WCDMA (0); Communication System Band: Band V; Frequency: 836.6 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 836.6 MHz; σ = 1.001 S/m; εr = 56.401; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(9.93, 9.93, 9.93); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) WCDMA B5/Edge2/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.368 W/kg WCDMA B5/Edge2/Zoom Scan (7x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 18.90 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 0.400 W/kg SAR(1 g) = 0.283 W/kg; SAR(10 g) = 0.189 W/kg Maximum value of SAR (measured) = 0.350 W/kg Date: 2018/03/05 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 6

LTE Band2 Edge2 0mm QPSK 1900MHz Allocation100 Start0 power reduction Communication System: UID 0, Generic LTE (0); Communication System Band: Band 2, E-UTRA/FDD (1850.0 - 1910.0 MHz); Frequency: 1900 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.54 S/m; εr = 52.464; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3825; ConvF(8, 8, 8); Calibrated: 2017/12/11; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn509; Calibrated: 2017/07/11 Phantom: ELI v4.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1045 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B2/Edge2/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.89 W/kg LTE B2/Edge2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 33.61 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 2.50 W/kg SAR(1 g) = 1.04 W/kg; SAR(10 g) = 0.420 W/kg Maximum value of SAR (measured) = 1.69 W/kg Date: 2018/02/19 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 7

LTE Band2 Edge2 15mm QPSK 1880MHz Allocation1 Start0 Communication System: UID 0, Generic LTE (0); Communication System Band: Band 2, E-UTRA/FDD (1850.0 - 1910.0 MHz); Frequency: 1880 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.483 S/m; εr = 51.023; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(8.04, 8.04, 8.04); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B2/Edge2/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.722 W/kg LTE B2/Edge2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 22.54 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.881 W/kg SAR(1 g) = 0.552 W/kg; SAR(10 g) = 0.317 W/kg Maximum value of SAR (measured) = 0.731 W/kg Date: 2018/03/06 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 8

LTE Band4 Edge2 0mm QPSK 1745MHz Allocation50 Start24 power reduction Communication System: UID 0, Generic LTE (0); Communication System Band: Band 4, E-UTRA/FDD (1710.0 - 1755.0 MHz); Frequency: 1745 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1745 MHz; σ = 1.433 S/m; εr = 52.996; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3825; ConvF(8.29, 8.29, 8.29); Calibrated: 2017/12/11; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn509; Calibrated: 2017/07/11 Phantom: ELI v4.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1045 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B4/Edge2/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.70 W/kg LTE B4/Edge2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 32.33 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 2.16 W/kg SAR(1 g) = 0.942 W/kg; SAR(10 g) = 0.398 W/kg Maximum value of SAR (measured) = 1.48 W/kg Date: 2018/02/15 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 9

LTE Band4 Edge2 15mm QPSK 1732.5MHz Allocation1 Start49 Communication System: UID 0, Generic LTE (0); Communication System Band: Band 4, E-UTRA/FDD (1710.0 - 1755.0 MHz); Frequency: 1732.5 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1732.5 MHz; σ = 1.423 S/m; εr = 52.735; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(8.3, 8.3, 8.3); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B4/Edge2/Area Scan 2 (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.704 W/kg LTE B4/Edge2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 22.74 V/m; Power Drift = -0.12 dB Peak SAR (extrapolated) = 0.856 W/kg SAR(1 g) = 0.519 W/kg; SAR(10 g) = 0.283 W/kg Maximum value of SAR (measured) = 0.709 W/kg Date: 2018/03/07 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 10

LTE Band5 Edge1 0mm QPSK 844MHz Allocation25 Start24 power reduction Communication System: UID 0, Generic LTE (0); Communication System Band: Band 5, E-UTRA/FDD (824.0 - 849.0 MHz); Frequency: 844 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 844 MHz; σ = 1.016 S/m; εr = 53.282; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(9.93, 9.93, 9.93); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B5/Edge1/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.988 W/kg LTE B5/Edge1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 33.44 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 2.42 W/kg SAR(1 g) = 0.776 W/kg; SAR(10 g) = 0.329 W/kg Maximum value of SAR (measured) = 1.33 W/kg Date: 2018/02/19 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 11

LTE Band5 Edge2 15mm QPSK 844MHz Allocation1 Start49 Communication System: UID 0, Generic LTE (0); Communication System Band: Band 5, E-UTRA/FDD (824.0 - 849.0 MHz); Frequency: 844 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 844 MHz; σ = 1.008 S/m; εr = 56.332; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(9.93, 9.93, 9.93); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B5/Edge2/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.568 W/kg LTE B5/Edge2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 23.36 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 0.620 W/kg SAR(1 g) = 0.427 W/kg; SAR(10 g) = 0.278 W/kg Maximum value of SAR (measured) = 0.537 W/kg Date: 2018/03/05 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 12

LTE Band7 Edge2 0mm QPSK 2560MHz Allocation50 Start24 power reduction Communication System: UID 0, Generic LTE (0); Communication System Band: Band 7, E-UTRA/FDD (2500.0 - 2570.0 MHz); Frequency: 2560 MHz; Duty Cycle: 1:1 Medium parameters used: f = 2560 MHz; σ = 2.181 S/m; εr = 50.63; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(7.41, 7.41, 7.41); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B7/Edge2/Area Scan (81x101x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 1.64 W/kg LTE B7/Edge2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 21.52 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 2.56 W/kg SAR(1 g) = 0.835 W/kg; SAR(10 g) = 0.287 W/kg Maximum value of SAR (measured) = 1.65 W/kg Date: 2018/02/13 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 13

LTE Band7 Edge2 15mm QPSK 2510MHz Allocation1 Start49 Communication System: UID 0, Generic LTE (0); Communication System Band: Band 7, E-UTRA/FDD (2500.0 - 2570.0 MHz); Frequency: 2510 MHz; Duty Cycle: 1:1 Medium parameters used: f = 2510 MHz; σ = 2.118 S/m; εr = 50.749; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(7.68, 7.68, 7.68); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B7/Edge2/Area Scan (81x101x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 1.40 W/kg LTE B7/Edge2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 26.01 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 1.80 W/kg SAR(1 g) = 0.973 W/kg; SAR(10 g) = 0.506 W/kg Maximum value of SAR (measured) = 1.38 W/kg Date: 2018/02/14 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 14

LTE Band12 Bottom 0mm QPSK 704MHz Allocation25 Start0 power reduction Communication System: UID 0, Generic LTE (0); Communication System Band: Band 12, E-UTRA/FDD (698.0 - 716.0 MHz); Frequency: 704 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 704 MHz; σ = 0.927 S/m; εr = 55.374; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(10.37, 10.37, 10.37); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B12/Bottom/Area Scan (71x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.757 W/kg LTE B12/Bottom/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 34.01 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 2.50 W/kg SAR(1 g) = 0.777 W/kg; SAR(10 g) = 0.364 W/kg Maximum value of SAR (measured) = 1.35 W/kg LTE B12/Bottom/Zoom Scan 2 (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 34.01 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 1.09 W/kg SAR(1 g) = 0.525 W/kg; SAR(10 g) = 0.332 W/kg Maximum value of SAR (measured) = 0.807 W/kg LTE B12/Bottom/Zoom Scan 3 (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 34.01 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 0.900 W/kg SAR(1 g) = 0.451 W/kg; SAR(10 g) = 0.284 W/kg Maximum value of SAR (measured) = 0.685 W/kg Date: 2018/02/22 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 15

LTE Band12 Edge2 15mm QPSK 711MHz Allocation1 Start0 Communication System: UID 0, Generic LTE (0); Communication System Band: Band 12, E-UTRA/FDD (698.0 - 716.0 MHz); Frequency: 711 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 711 MHz; σ = 0.936 S/m; εr = 54.888; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(10.37, 10.37, 10.37); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B12/Edge2/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.302 W/kg LTE B12/Edge2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 18.18 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 0.351 W/kg SAR(1 g) = 0.253 W/kg; SAR(10 g) = 0.181 W/kg Maximum value of SAR (measured) = 0.306 W/kg Date: 2018/03/05 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 16

LTE Band13 Bottom 0mm QPSK 782MHz Allocation50 Start0 power reduction Communication System: UID 0, Generic LTE (0); Communication System Band: Band 13, E-UTRA/FDD (777.0 - 787.0 MHz); Frequency: 782 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 782 MHz; σ = 0.95 S/m; εr = 54.585; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(10.29, 10.29, 10.29); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B13/Bottom/Area Scan (71x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.14 W/kg LTE B13/Bottom/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 35.05 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 2.18 W/kg SAR(1 g) = 0.717 W/kg; SAR(10 g) = 0.359 W/kg Maximum value of SAR (measured) = 1.13 W/kg Date: 2018/02/21 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 17

LTE Band13 Edge2 15mm QPSK 782MHz Allocation1 Start49 Communication System: UID 0, Generic LTE (0); Communication System Band: Band 13, E-UTRA/FDD (777.0 - 787.0 MHz); Frequency: 782 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 782 MHz; σ = 0.949 S/m; εr = 56.911; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(10.29, 10.29, 10.29); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B13/Edge2/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.401 W/kg LTE B13/Edge2/Zoom Scan (7x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.81 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 0.443 W/kg SAR(1 g) = 0.318 W/kg; SAR(10 g) = 0.218 W/kg Maximum value of SAR (measured) = 0.389 W/kg Date: 2018/03/05 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 18

LTE Band25 Edge2 0mm QPSK 1905MHz Allocation1 Start49 power reduction Communication System: UID 0, Generic LTE (0); Communication System Band: Band 25, E-UTRA/FDD (1850.0 - 1915.0 MHz); Frequency: 1905 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1905 MHz; σ = 1.543 S/m; εr = 53.426; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3825; ConvF(8, 8, 8); Calibrated: 2017/12/11; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn509; Calibrated: 2017/07/11 Phantom: ELI v4.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1045 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B25/Edge2/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.97 W/kg LTE B25/Edge2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 34.00 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 2.51 W/kg SAR(1 g) = 1.04 W/kg; SAR(10 g) = 0.426 W/kg Maximum value of SAR (measured) = 1.78 W/kg Date: 2018/02/20 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 19

LTE Band25 Edge2 15mm QPSK 1905MHz Allocation1 Start49 Communication System: UID 0, Generic LTE (0); Communication System Band: Band 25, E-UTRA/FDD (1850.0 - 1915.0 MHz); Frequency: 1905 MHz; Duty Cycle: 1:1 Medium parameters used: f = 1905 MHz; σ = 1.51 S/m; εr = 50.99; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(8.04, 8.04, 8.04); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B2/Edge2/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.824 W/kg LTE B2/Edge2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 23.76 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 0.990 W/kg SAR(1 g) = 0.623 W/kg; SAR(10 g) = 0.359 W/kg Maximum value of SAR (measured) = 0.820 W/kg Date: 2018/03/06 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 20

LTE Band26 Bottom 0mm QPSK 821.5MHz Allocation1 Start0 power reduction Communication System: UID 0, Generic LTE (0); Communication System Band: Band 26, E-UTRA/FDD (814.0 - 849.0 MHz); Frequency: 821.5 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 821.5 MHz; σ = 0.985 S/m; εr = 54.904; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(9.93, 9.93, 9.93); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B26/Bottom/Area Scan (71x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.19 W/kg LTE B26/Bottom/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 34.85 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 2.02 W/kg SAR(1 g) = 0.738 W/kg; SAR(10 g) = 0.391 W/kg Maximum value of SAR (measured) = 1.16 W/kg LTE B26/Bottom/Zoom Scan 2 (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 34.85 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 1.06 W/kg SAR(1 g) = 0.647 W/kg; SAR(10 g) = 0.407 W/kg Maximum value of SAR (measured) = 0.847 W/kg Date: 2018/02/20 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 21

LTE Band26 Edge2 15mm QPSK 821.5MHz Allocation1 Start0 Communication System: UID 0, Generic LTE (0); Communication System Band: Band 26, E-UTRA/FDD (814.0 - 849.0 MHz); Frequency: 821.5 MHz; Duty Cycle: 1:1 Medium parameters used (interpolated): f = 821.5 MHz; σ = 0.987 S/m; εr = 56.55; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(9.93, 9.93, 9.93); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B26/Edge2/Area Scan (61x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.506 W/kg LTE B26/Edge2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 22.66 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 0.549 W/kg SAR(1 g) = 0.394 W/kg; SAR(10 g) = 0.265 W/kg Maximum value of SAR (measured) = 0.485 W/kg Date: 2018/03/05 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 22

LTE Band41 Bottom 0mm QPSK 2680MHz Allocation50 Start49 power reduction Communication System: UID 0, Generic LTE (0); Communication System Band: Band 41, E-UTRA/TDD (2496.0 - 2690.0 MHz); Frequency: 2680 MHz; Duty Cycle: 1:1.59956 Medium parameters used: f = 2680 MHz; σ = 2.247 S/m; εr = 50.244; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(7.41, 7.41, 7.41); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B41/Bottom/Area Scan (91x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.843 W/kg LTE B41/Bottom/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.53 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 1.35 W/kg SAR(1 g) = 0.560 W/kg; SAR(10 g) = 0.213 W/kg Maximum value of SAR (measured) = 0.910 W/kg Date: 2018/02/15 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 23

LTE Band41 Edge2 15mm QPSK 2680MHz Allocation1 Start49 Communication System: UID 0, Generic LTE (0); Communication System Band: Band 41, E-UTRA/TDD (2496.0 - 2690.0 MHz); Frequency: 2680 MHz; Duty Cycle: 1:1.59956 Medium parameters used: f = 2680 MHz; σ = 2.247 S/m; εr = 50.244; ρ = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration Probe: EX3DV4 - SN3917; ConvF(7.41, 7.41, 7.41); Calibrated: 2017/05/16; Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE4 Sn1369; Calibrated: 2017/05/12 Phantom: ELI v5.0 (20deg probe tilt); Type: QDOVA001BB; Serial: TP:1203 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) LTE B41/Edge2 2/Area Scan (81x131x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 1.05 W/kg LTE B41/Edge2 2/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 21.52 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 1.34 W/kg SAR(1 g) = 0.683 W/kg; SAR(10 g) = 0.334 W/kg Maximum value of SAR (measured) = 1.01 W/kg Date: 2018/02/15 Ambient Temp. : 24.0 degree.C. Liquid Temp.; 23.5 degree.C. Plot No. 24


Document Created: 2018-06-13 11:34:23
Document Modified: 2018-06-13 11:34:23
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC