03 FCC Test Report_15B

FCC ID: ACJ932IM2035BB

Test Report

Download: PDF
FCCID_4214311

Test report No. : 12541477H-B-R1 Page : 1 of 14 Issued date : March 22, 2019 FCC ID : ACJ932IM2035BB EMI TEST REPORT Test Report No. : 12541477H-B-R1 Applicant : Panasonic Corporation of North America Type of Equipment : WAM MID Model No. : IM2035BB FCC ID : ACJ932IM2035BB Test regulation : FCC Part 15 Subpart B: 2018 Test Result : Complied (Refer to SECTION 3.2) 1. This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc. 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the above regulation. 4. The test results in this report are traceable to the national or international standards. 5. This test report covers EMC technical requirements. It does not cover administrative issues such as Manual or non-EMC test related Requirements. (if applicable) 6. The all test items in this test report are conducted by UL Japan, Inc. Ise EMC Lab. 7. This test report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. 8. The information provided from the customer for this report is identified in SECTION 1. 9. This report is a revised version of 12541477H-B. 12541477H-B is replaced with this report. Date of test: January 24, 2019 Representative test engineer: Toshifumi Yoneshige Engineer Consumer Technology Division Approved by: Shinichi Miyazono Engineer Consumer Technology Division This laboratory is accredited by the NVLAP LAB CODE 200572-0, U.S.A. The tests reported herein have been performed in accordance with its terms of accreditation. *As for the range of Accreditation in NVLAP, you may refer to the WEB address, http://japan.ul.com/resources/emc_accredited/ NVLAP LAB CODE: 200572-0 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan. There is no testing item of "Non-accreditation". UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 Report Cover Page - 13-EM-F0429 Issue # 14.0

Test report No. : 12541477H-B-R1 Page : 2 of 14 Issued date : March 22, 2019 FCC ID : ACJ932IM2035BB REVISION HISTORY Original Test Report No.: 12541477H-B Revision Test report No. Date Page revised Contents - 12541477H-B February 13, - - (Original) 2019 1 12541477H-B-R1 March 22, 2019 P.7 Correction of erroneous description of configuration diagram in Clause 4.2; From “G” to “F” UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 12541477H-B-R1 Page : 3 of 14 Issued date : March 22, 2019 FCC ID : ACJ932IM2035BB CONTENTS PAGE SECTION 1: Customer information ...................................................................................................... 4 SECTION 2: Equipment under test (E.U.T.) ......................................................................................... 4 SECTION 3: Test specification, procedures & results ......................................................................... 5 SECTION 4: Operation of E.U.T. during testing .................................................................................. 7 SECTION 5: Radiated Emission ............................................................................................................. 8 APPENDIX 1: Test data .......................................................................................................................... 9 Radiated emission ............................................................................................................................... 9 APPENDIX 2: Test instruments ........................................................................................................... 11 APPENDIX 3: Photographs of test setup ............................................................................................. 12 Radiated Emission ............................................................................................................................ 12 Worst Case Position (Horizontal: X-axis / Vertical: X-axis) ............................................................ 14 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 12541477H-B-R1 Page : 4 of 14 Issued date : March 22, 2019 FCC ID : ACJ932IM2035BB SECTION 1: Customer information Company Name : Panasonic Corporation of North America*1) Address : Two Riverfront Plaza, 9th Floor Newark, NJ 07102-5490 Telephone Number : +1-201-348-7760 Facsimile Number : +1-201-348-7760 Contact Person : Ben Botros *1) Panasonic Corporation of North America designates Panasonic Automotive Systems Asia Pacific Co.,Ltd as manufacturer of the product (WAM MID). The information provided from the customer is as follows; - Applicant, Type of Equipment, Model No. on the cover and other relevant pages - SECTION 1: Customer information - SECTION 2: Equipment under test (E.U.T.) - SECTION 4: Operation of E.U.T. during testing * The laboratory is exempted from liability of any test results affected from the information in SECTION 2 and 4. SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : WAM MID Model No. : IM2035BB Serial No. : Refer to Section 4, Clause 4.2 Rating : DC 12.0 V Receipt Date of Sample : December 27, 2018 (Information from test lab.) Country of Mass-production : Thailand Condition of EUT : Production prototype (Not for Sale: This sample is equivalent to mass-produced items.) Modification of EUT : No Modification by the test lab 2.2 Product Description Model: IM2035BB (referred to as the EUT in this report) is a WAM MID. Radio Specification [Transmitter] Radio Type : Transmitter Frequency of Operation : 125 kHz Modulation : ASK Antenna type : Air core coil inductive antenna Clock frequency (Maximum) : 4 MHz [Receiver] Radio Type : Receiver Frequency of Operation : 433.92 MHz FCC15.111(b) The receiving antenna (of this EUT) is installed inside the EUT and cannot be removed (permanently attached). Therefore, Radiated emission test was performed. UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 12541477H-B-R1 Page : 5 of 14 Issued date : March 22, 2019 FCC ID : ACJ932IM2035BB SECTION 3: Test specification, procedures & results 3.1 Test Specification Test Specification : FCC Part 15 Subpart B FCC Part 15 final revised on March 12, 2018 and effective April 11, 2018 Title : FCC 47CFR Part15 Radio Frequency Device Subpart B Unintentional Radiators 3.2 Procedures and results Item Test Procedure Limits Deviation Worst margin Result Remarks FCC: ANSI C63.4: 2014 7. AC power - line FCC:Part 15 Subpart B Conducted conducted emission 15.107(a) N/A N/A N/A *1) emission measurements IC: RSS-Gen 8.8 IC: RSS-Gen 8.8 FCC: ANSI C63.4: 2014 FCC: Part 15 Subpart B 23.1 dB Radiated 8. Radiated Complied 15.109(a) N/A 49.146 MHz - emission emission measurements a) Vertical, QP IC: RSS-Gen 7 IC: RSS-Gen 7.1.2 *Note: UL Japan, Inc’s EMI Work Procedure 13-EM-W0420. *1) The test is not applicable since the EUT is not the device that is designed to be connected to the public utility (AC) power line. a) Refer to APPENDIX 1 (data of Radiated emission) Symbols: Complied The data of this test item has enough margin, more than the measurement uncertainty. Complied# The data of this test item meets the limits unless the measurement uncertainty is taken into consideration. 3.3 Addition to standard No addition, exclusion nor deviation has been made from the standard. 3.4 Uncertainty There is no applicable rule of uncertainty in this applied standard. Therefore, the following results are derived depending on whether or not laboratory uncertainty is applied. EMI The following uncertainties have been calculated to provide a confidence level of 95 % using a coverage factor k = 2. Radiated emission (Below 1 GHz) Polarity (3 m*)(+/-) (10 m*)(+/-) 30 MHz to 200 MHz 200 MHz to 1000 MHz 30 MHz to 200 MHz 200 MHz to 1000 MHz Horizontal 4.8 dB 5.2 dB 4.8 dB 5.0 dB Vertical 5.0 dB 6.3 dB 4.9 dB 5.0 dB Radiated emission (Above 1 GHz) (3 m*)(+/-) (1 m*)(+/-) (10 m*)(+/-) 1 GHz to 6 GHz 6 GHz to 18 GHz 10 GHz to 26.5 GHz 26.5 GHz to 40 GHz 1 GHz to 18 GHz 5.0 dB 5.3 dB 5.8 dB 5.8 dB 5.2 dB * Measurement distance UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 12541477H-B-R1 Page : 6 of 14 Issued date : March 22, 2019 FCC ID : ACJ932IM2035BB 3.5 Test Location UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999, Facsimile: +81 596 24 8124 NVLAP Lab. code: 200572-0 / FCC Test Firm Registration Number: 199967 Maximum IC Registration Width x Depth x Size of reference ground plane (m) Test site Other rooms measuremen Number Height (m) / horizontal conducting plane t distance No.1 semi-anechoic No.1 Power 2973C-1 19.2 x 11.2 x 7.7 7.0 x 6.0 10 m chamber source room No.2 semi-anechoic 2973C-2 7.5 x 5.8 x 5.2 4.0 x 4.0 - 3m chamber No.3 semi-anechoic No.3 Preparation 2973C-3 12.0 x 8.5 x 5.9 6.8 x 5.75 3m chamber room No.3 shielded room - 4.0 x 6.0 x 2.7 N/A - - No.4 semi-anechoic No.4 Preparation 2973C-4 12.0 x 8.5 x 5.9 6.8 x 5.75 3m chamber room No.4 shielded room - 4.0 x 6.0 x 2.7 N/A - - No.5 semi-anechoic - 6.0 x 6.0 x 3.9 6.0 x 6.0 - - chamber No.6 shielded room - 4.0 x 4.5 x 2.7 4.0 x 4.5 - - No.6 measurement - 4.75 x 5.4 x 3.0 4.75 x 4.15 - - room No.7 shielded room - 4.7 x 7.5 x 2.7 4.7 x 7.5 - - No.8 measurement - 3.1 x 5.0 x 2.7 3.1 x 5.0 - - room No.9 measurement - 8.8 x 4.6 x 2.8 2.4 x 2.4 - - room No.11 measurement - 6.2 x 4.7 x 3.0 4.8 x 4.6 - - room * Size of vertical conducting plane (for Conducted Emission test) : 2.0 m x 2.0 m for No.1, No.2, No.3, and No.4 semi-anechoic chambers and No.3 and No.4 shielded rooms. 3.6 Test data, Test instruments, and Test set up Refer to APPENDIX. UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 12541477H-B-R1 Page : 7 of 14 Issued date : March 22, 2019 FCC ID : ACJ932IM2035BB SECTION 4: Operation of E.U.T. during testing 4.1 Operating Mode(s) Mode Remarks 1) Normal Keyless Operation Mode - *The test signal level was confirmed to be sufficient to stabilize the local oscillator of the EUT. * It was confirmed by using checker that the EUT receives the signal from the transmitter (pair of EUT). 4.2 Configuration and peripherals B 1 2 D 4 E 5 A 3 C F 5 AC 100V/60Hz * Cabling and setup were taken into consideration and test data was taken under worse case conditions. *Item No. A includes Receiver Antenna. Description of EUT and Support equipment No. Item Model number Serial number Manufacturer Remark A WAM MID IM2035BB 500017-0 180918 Panasonic Automotive Systems EUT Asia Pacific Co.,Ltd B Immobilizer 898394787Y 002 TOKAI RIKA CO., LTD - C RKE TXE IK3600F 37 Panasonic Automotive Systems - Asia Pacific Co.,Ltd D Jig - - - - E SW/LED Box - - - - F DC Power Supply PAK35-10A LF002313 KIKUSUI - List of cables used No. Name Length (m) Shield Remark Cable Connector 1 Signal Cable1 2.0 Unshielded Unshielded - 2 Signal Cable2 1.0 Unshielded Unshielded - 3 DC power Cable 1.0 Unshielded Unshielded - 4 Signal Cable 0.8 Unshielded Unshielded - 5 AC power Cable 1.8 Unshielded Unshielded - UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 12541477H-B-R1 Page : 8 of 14 Issued date : March 22, 2019 FCC ID : ACJ932IM2035BB SECTION 5: Radiated Emission 5.1 Operating environment Test place : No.4 semi anechoic chamber Temperature : See data Humidity : See data 5.2 Test configuration EUT was placed on a urethane platform of nominal size, 1.0 m by 1.5 m, raised 0.8 m above the conducting ground plane. The EUT was set on the edge of the tabletop. Test was made with the antenna positioned in both the horizontal and vertical planes of polarization. The measurement antenna was varied in height above the conducting ground plane to obtain the maximum signal strength. Photographs of the set up are shown in Appendix 3. 5.3 Test conditions Frequency range : 30 MHz - 200 MHz (Biconical antenna) / 200 MHz - 1000 MHz (Logperiodic antenna) 1000 MHz - 2000 MHz (Horn antenna) Test distance : 3m EUT position : Table top EUT operation mode : See Clause 4.1 5.4 Test procedure The height of the measuring antenna varied between 1 and 4 m and EUT was rotated a full revolution in order to obtain the maximum value of the electric field intensity. The measurements were performed for both vertical and horizontal antenna polarization with the Test Receiver, or the Spectrum Analyzer. The radiated emission measurements were made with the following detector function of the Test Receiver and the Spectrum Analyzer. Frequency Below 1GHz Above 1GHz *1) Instrument used Test Receiver Test Receiver IF Bandwidth QP: BW 120 kHz PK: BW 1 MHz, CISPR AV: BW 1 MHz *1) The measurement data was adjusted to a 3 m distance using the following Distance Factor. Distance Factor: 20 x log (3.6 m / 3 m) = 1.59 dB - The noise levels were confirmed at each position of X, Y and Z axes of EUT to see the position of maximum noise, and the test was made at the position that has the maximum noise. 5.5 Test result Summary of the test results: Pass The limit is rounded down to one decimal place. The test result is rounded off to one or two decimal places, so some differences might be observed. Date: January 24, 2019 Test engineer: Toshifumi Yoneshige UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 12541477H-B-R1 Page : 9 of 14 Issued date : March 22, 2019 FCC ID : ACJ932IM2035BB APPENDIX 1: Test data Radiated emission Report No. 12541477H Test place Ise EMC Lab. Semi Anechoic Chamber No.4 Date January 24, 2019 Temperature / Humidity 24 deg. C / 41 % RH Engineer Toshifumi Yoneshige (Below 1 GHz) Mode Mode 1 LIMIT : FCC15.109(a) 3m, below 1GHz:QP, above 1GHz:PK All other spurious emissions were less than 20dB for the limit. Horizontal Vertical Horizontal [dBuV/m] << QP DATA >> Vertical 80 70 60 50 40 30 20 10 0 30M 50M 70M 100M 200M 300M 500M 700M 1G Frequency[Hz] Antenna Loss& Frequency Reading Level Angle Height Limit Margin DET Factor Gain Polar. Comment [MHz] [dBuV] [dB/m] [dB] [dBuV/m] [Deg] [cm] [dBuV/m] [dB] 30.681 22.4 QP 18.1 -24.9 15.6 359 100 Vert. 40.0 24.4 49.146 30.1 QP 11.4 -24.6 16.9 35 100 Vert. 40.0 23.1 65.520 34.1 QP 7.0 -24.3 16.8 41 100 Vert. 40.0 23.2 80.080 32.6 QP 6.4 -24.1 14.9 271 100 Vert. 40.0 25.1 310.624 21.9 QP 14.0 -22.0 13.9 359 100 Vert. 46.0 32.1 309.273 22.0 QP 13.9 -22.0 13.9 359 150 Hori. 46.0 32.1 CHART: WITH FACTOR ANT TYPE: - 30 MHz: LOOP, 30 MHz - 200 MHz: BICONICAL, 200 MHz - 1000 MHz: LOGPERIODIC, 1000 MHz -: HORN CALCULATION: RESULT = READING + ANT FACTOR + LOSS & GAIN (CABLE + ATT - GAIN(AMP)) UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 12541477H-B-R1 Page : 10 of 14 Issued date : March 22, 2019 FCC ID : ACJ932IM2035BB Radiated emission Report No. 12541477H Test place Ise EMC Lab. Semi Anechoic Chamber No.4 Date January 24, 2019 Temperature / Humidity 24 deg. C / 41 % RH Engineer Toshifumi Yoneshige (Above 1 GHz) Mode Mode 1 LIMIT : FCC15.109(a) 3m, below 1GHz:QP, above 1GHz:PK FCC15.109(a) 3m, below 1GHz:QP, above 1GHz:AV Horizontal Vertical Horizontal [dBuV/m] << AV/PEAK DATA >> Vertical 110 100 90 80 70 60 50 40 30 20 10 0 1G 2G Frequency[Hz] Antenna Loss& Frequency Reading Level Angle Height Limit Margin DET Factor Gain Polar. Comment [MHz] [dBuV] [dB/m] [dB] [dBuV/m] [Deg] [cm] [dBuV/m] [dB] 1522.041 43.8 PK 25.3 -28.8 40.3 359 100 Vert. 73.9 33.6 1522.041 29.5 AV 25.3 -28.8 26.0 359 100 Vert. 53.9 27.9 1525.154 29.5 AV 25.3 -28.8 26.0 0 100 Hori. 53.9 27.9 1525.154 43.4 PK 25.3 -28.8 39.9 0 100 Hori. 73.9 34.1 CHART: WITH FACTOR ANT TYPE: - 30 MHz: LOOP, 30 MHz - 200 MHz: BICONICAL, 200 MHz - 1000 MHz: LOGPERIODIC, 1000 MHz -: HORN CALCULATION: RESULT = READING + ANT FACTOR + LOSS & GAIN (CABLE - GAIN(AMP) + D-factor) UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124

Test report No. : 12541477H-B-R1 Page : 11 of 14 Issued date : March 22, 2019 FCC ID : ACJ932IM2035BB APPENDIX 2: Test instruments Test Instruments Test LIMS ID Description Manufacturer Model Serial Last Calibration Cal Int Item Calibration Due Date Date RE 148898 Attenuator KEYSIGHT 8491A MY52462282 10/03/2018 10/31/2019 12 RE 142227 Measure KOMELON KMC-36 - - - - RE 141152 EMI measurement program TSJ TEPTO-DV - - - - RE 141899 Spectrum Analyzer AGILENT E4448A MY46180655 08/10/2018 08/31/2019 12 RE 141562 Thermo-Hygrometer CUSTOM CTH-201 0010 01/11/2019 01/31/2020 12 RE 142011 AC4_Semi Anechoic TDK Semi Anechoic DA-10005 06/28/2018 06/30/2020 24 Chamber(NSA) Chamber 3m RE 141412 Microwave Cable Junkosha MWX221 1305S002R(1m) / 06/14/2018 06/30/2019 12 1405S146(5m) RE 141581 MicroWave System AGILENT 83017A 650 10/04/2018 10/31/2019 12 Amplifier RE 141506 Horn Antenna 15-40GHz Schwarzbeck BBHA9170 BBHA9170307 06/08/2018 06/30/2019 12 RE 141508 Horn Antenna 1-18GHz Schwarzbeck BBHA9120D 9120D-557 06/08/2018 06/30/2019 12 RE 142017 AC4_Semi Anechoic TDK Semi Anechoic DA-10005 04/07/2018 04/30/2019 12 Chamber(SVSWR) Chamber 3m RE 141425 Biconical Antenna Schwarzbeck BBA9106 1302 06/01/2018 06/30/2019 12 RE 141397 Coaxial Cable UL Japan - - 06/13/2018 06/30/2019 12 RE 141267 Logperiodic Schwarzbeck VUSLP9111B 911B-192 06/01/2018 06/30/2019 12 Antenna(200-1000MHz) RE 141951 EMI Test Receiver Rohde & Schwarz ESR26 101408 01/30/2018 01/31/2019 12 RE 141583 Pre Amplifier SONOMA 310 260833 02/27/2018 02/28/2019 12 INSTRUMENT *Hyphens for Last Calibration Date, Calibration Due Date and Cal Int (month) are instruments that Calibration is not required (e.g. software), or instruments checked in advance before use. The expiration date of the calibration is the end of the expired month. All equipment is calibrated with valid calibrations. Each measurement data is traceable to the national or international standards. As for some calibrations performed after the tested dates, those test equipment have been controlled by means of an unbroken chains of calibrations. Test item: RE: Radiated emission UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124


Document Created: 2019-03-27 23:16:23
Document Modified: 2019-03-27 23:16:23
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC