03 FCC RF Exposure_DSS

FCC ID: ACJ932AT1804

RF Exposure Info

Download: PDF
FCCID_4053444

RF Exposure / MPE Calculation No. : 12443390S-A Applicant : Panasonic Corporation Type of Equipment : Car Audio System Model No. : AT1804 FCC ID : ACJ932AT1804 Panasonic Corporation declares that Model: AT1804 complies with FCC radiation exposure requirement specified in the FCC Rule 2.1091 (for mobile). RF Exposure Calculations: The following information provides the minimum separation distance for the highest gain antenna provided with the “AT1804“ as calculated from (B) Limits for General Population / Uncontrolled Exposure of TABLE 1- LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) of §1.1310 Radiofrequency radiation exposure limits. This calculation is based on the highest EIRP possible from the system, considering maximum power and antenna gain, and considering a 1mW/cm^2 uncontrolled exposure limit. The Friis formula used was: PG S  4  r2 Where P= 0.52 mW (Maximum average output power) Time average was used for the above value in consideration of 6-minutes time-averaging Burst power average was used for the above value in consideration of worst condition. G= 1.288 Numerical Antenna gain; equal to 1.1 dBi r= 20 cm (Separation distance) Power Density Result S = 0.00013 mW/cm2 Even taking into account the tolerance, this device can be satisfied with the limits.


Document Created: 2018-10-17 13:05:42
Document Modified: 2018-10-17 13:05:42
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC