User manual

FCC ID: ACJ-RP-HD605N

Users Manual

Download: PDF
FCCID_3720214

TQBMXXX2-RP-HD605N_P_eng.fm 1 ページ ２０１８年１月１０日 水曜日 午後３時７分 Safety precautions Limited Warranty A lithium ion battery that is recyclable Panasonic Products Limited Warranty powers the product you have purchased. Please call 1-800-8- Limited Warranty Coverage BATTERY for information on how to If your product does not work properly because of a defect in Basic Owner’s Manual recycle this battery. materials or workmanship, Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the Digital Wireless Stereo Headphones This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (1) this device may not cause interference, and RP-HD605N (b) replace it with a new or a refurbished equivalent value (2) this device must accept any interference, including product, or (c) refund your purchase price. The decision to Model No. interference that may cause undesired operation of this repair, replace or refund will be made by the warrantor. device. FCC ID: ACJ-RP-HD605N Product or Part Name Parts Labor Model: RP-HD605N Headphones/ 1 year Not Applicable This transmitter must not be co-located or operated in Earphones/Headset conjunction with any other antenna or transmitter. All included 90 days Not Applicable This equipment complies with FCC radiation exposure limits Accessories set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment During the “Labor” warranty period there will be no charge has very low levels of RF energy that is deemed to comply for labor. During the “Parts” warranty period, there will be no without testing of specific absorption ratio (SAR). charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States. This FCC Note: warranty is extended only to the original purchaser of a new This equipment has been tested and found to comply with the product which was not sold “as is”. limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Mail-In Service--Online Repair Request These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency Online Repair Request energy and, if not installed and used in accordance with the To submit a new repair request and for quick repair status instructions, may cause harmful interference to radio visit our Web Site at communications. http://shop.panasonic.com/support However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause When shipping the unit, carefully pack, include all supplied Thank you for purchasing this product. harmful interference to radio or television reception, which accessories listed in the Owner’s Manual, and send it Please read these instructions carefully before using this product, and save this manual for future use. can be determined by turning the equipment off and on, the prepaid, adequately insured and packed well in a carton user is encouraged to try to correct the interference by one or box. When shipping Lithium Ion batteries please visit our Register online at http://shop.panasonic.com/support more of the following measures: Web Site at • Reorient or relocate the receiving antenna. http://shop.panasonic.com/support as Panasonic is • Increase the separation between the equipment and committed to providing the most up to date information. If you have any questions, visit: receiver. http://shop.panasonic.com/support Include a letter detailing the complaint, a return address and • Connect the equipment into an outlet on a circuit different provide a daytime phone number where you can be from that to which the receiver is connected. reached. A valid registered receipt is required under the • Consult the dealer or an experienced radio/TV technician for help. Limited Warranty. Any unauthorized changes or modifications to this equipment IF REPAIR IS NEEDED DURING THE WARRANTY would void the user’s authority to operate this device. PERIOD, THE PURCHASER WILL BE REQUIRED TO This device complies with Part 15 of the FCC Rules. FURNISH A SALES RECEIPT/PROOF OF PURCHASE Operation is subject to the following two conditions: (1) This INDICATING DATE OF PURCHASE, AMOUNT PAID AND device may not cause harmful interference, and (2) this PLACE OF PURCHASE. CUSTOMER WILL BE device must accept any interference received, including CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED interference that may cause undesired operation. WITHOUT SUCH PROOF OF PURCHASE. Responsible Party: Panasonic Corporation of North America P Two Riverfront Plaza, Newark, NJ 07102-5490 Limited Warranty Limits and Exclusions Support Contact: http://shop.panasonic.com/support This warranty ONLY COVERS failures due to defects in Panasonic Corporation of North America materials or workmanship, and DOES NOT COVER normal Two Riverfront Plaza, Newark, NJ 07102-5490 ∫ Unit wear and tear or cosmetic damage. The warranty ALSO http://shop.panasonic.com DOES NOT COVER damages which occurred in shipment, WARNING: or failures which are caused by products not supplied by the To reduce the risk of fire, electric shock or product warrantor, or failures which result from accidents, misuse, © Panasonic Corporation 2018 TQBMXXXX damage, abuse, neglect, mishandling, misapplication, alteration, Printed in China F02188SK0 • Do not expose this unit to rain, moisture, dripping or faulty installation, set-up adjustments, misadjustment of splashing. consumer controls, improper maintenance, power line • Do not place objects filled with liquids, such as vases, surge, lightning damage, modification, introduction of sand, on this unit. humidity or liquids, commercial use such as hotel, office, • Use the recommended accessories. • Do not remove covers. restaurant, or other business or rental use of the product, or IMPORTANT SAFETY • Do not repair this unit by yourself. Refer servicing to service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to More detailed operating qualified service personnel. instructions are available in “Owner’s Manual (PDF format)”. INSTRUCTIONS • Avoid using or placing this unit near sources of heat. acts of God. To read it, download it from the • Do not use while operating a motorized vehicle. It may create a THERE ARE NO EXPRESS WARRANTIES EXCEPT AS Read these operating instructions carefully before using the unit. traffic hazard and is illegal in many areas. website. LISTED UNDER “LIMITED WARRANTY COVERAGE”. Follow the safety instructions on the unit and the applicable • Do not listen with this unit at high volume in places where you http://panasonic.jp/support/global/ safety instructions listed below. Keep these operating THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL need to hear sounds from the surrounding environment for cs/accessories/oi/rp_hd600n/ instructions handy for future reference. OR CONSEQUENTIAL DAMAGES RESULTING FROM • Click the desired language. safety, such as at railroad crossings, and construction sites. THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY 1 Read these instructions. • Certification information can be found on the right side of the headphones. Remove the right ear pad to see it. BREACH OF THIS WARRANTY. 2 Keep these instructions. 3 Heed all warnings. (As examples, this excludes damages for lost time, travel to ∫ Allergies and from the servicer, loss of or damage to media or 4 Follow all instructions. • Discontinue use if you experience discomfort with the ear pads 5 Do not use this apparatus near water. images, data or other memory or recorded content. The or any other parts that directly contact your skin. Accessories 6 Clean only with dry cloth. • Continued use may cause rashes or other allergic reactions. items listed are not exclusive, but for illustration only.) 7 Do not block any ventilation openings. Install in accordance ALL EXPRESS AND IMPLIED WARRANTIES, Please check and identify the supplied accessories. with the manufacturer’s instructions. This unit may receive radio interference caused by mobile INCLUDING THE WARRANTY OF MERCHANTABILITY, To order accessories, refer to “Limited Warranty” on the 8 Do not install near any heat sources such as radiators, heat telephones during use. If such interference occurs, please ARE LIMITED TO THE PERIOD OF THE LIMITED rear page. increase separation between this unit and the mobile registers, stoves, or other apparatus (including amplifiers) that WARRANTY. ∏ 1 x USB charging cord produce heat. telephone. Some states do not allow the exclusion or limitation of ∏ 1 x Detachable cord 9 Do not defeat the safety purpose of the polarized or incidental or consequential damages, or limitations on how ∏ 1 x Carrying case grounding-type plug. A polarized plug has two blades with one This unit is intended for use in moderate and tropical climates. long an implied warranty lasts, so the exclusions may not ∏ 1 x Airplane adaptor wider than the other. A grounding-type plug has two blades apply to you. and a third grounding prong. The wide blade or the third prong This warranty gives you specific legal rights and you may are provided for your safety. If the provided plug does not fit also have other rights which vary from state to state. If a into your outlet, consult an electrician for replacement of the Caution: Use only the supplied USB charging cord when The serial number of this product can be found on the left side problem with this product develops during or after the obsolete outlet. connecting to a computer. 10 Protect the power cord from being walked on or pinched of the headphones. warranty period, you may contact your dealer or Service particularly at plugs, convenience receptacles, and the point Remove the left ear pad to see it. Center. If the problem is not handled to your satisfaction, where they exit from the apparatus. Please note them in the space provided below and keep for then write to: 11 Only use attachments/accessories specified by the future reference. manufacturer. MODEL NUMBER RP-HD605N Consumer Affairs Department Maintenance 12 Use only with the cart, stand, tripod, SERIAL NUMBER Panasonic Corporation of North America bracket, or table specified by the Clean this unit with a dry and soft cloth. manufacturer, or sold with the apparatus. User memo: 661 Independence Pkwy • Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a chemical wiper, etc. This might cause the exterior When a cart is used, use caution when DATE OF PURCHASE Chesapeake, VA 23320 moving the cart/apparatus combination to DEALER NAME case to be deformed or the coating to come off. avoid injury from tip-over. DEALER ADDRESS PARTS AND SERVICE, WHICH ARE NOT COVERED BY 13 Unplug this apparatus during lightning THIS LIMITED WARRANTY, ARE YOUR storms or when unused for long periods of TELEPHONE NUMBER RESPONSIBILITY. time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. As of April 2017 until 2018/2/22

TQBMXXX2-RP-HD605N_P_eng.fm 2 ページ ２０１８年１月１０日 水曜日 午後３時７分 A Part names A   a Right (R) side 1 Audio input terminal 2 Ambient sound enhancer sensor panel 3 [Multiple functions button] 4 Noise-canceling LED 5 [NC] button 6 Power/pairing LED ∫ Activating a voice functions [ ] Low volume. 7 [Í/I ( )] button* 8 Charging terminal (DC IN) • The ambient sound enhancer function is operating. 9 Microphone Ear pad Press and hold [Multiple functions button] (a) of this • Increase the volume of the unit. (l E ) Raised dot indicating the left side unit for approx. 3 seconds. • Increase the volume on the Bluetooth® device. * Í/I: Standby/ON Sound from the device is cut off. / Sound quality is bad.  ∫ Making a multi-point connection [ ] • Sound may be disrupted if signals are blocked. Do not fully cover this B Charging 1 Register the unit to both the first Bluetooth® device and unit with the palm of your hand, etc. the second Bluetooth® device. • The device may be out of the 10 m (33 feet) communication range. The rechargeable battery (installed in the unit) is not 2 Connect the first Bluetooth® device, which will be used Move the device closer to this unit.  charged initially. Charge the battery before using the unit. • Remove any obstacle between this unit and the device. for music playback, and the unit. Connect this unit to a computer (a) using the USB • Switch off any wireless LAN device when not in use. 3 Connect the second Bluetooth® device, which will be • A communication problem may arise if the battery is not fully  charging cord (supplied) (b). used for calls, and the unit. charged. Charge the unit. (l B )  • The power/pairing LED (c) lights in red when charging is in • If the unit and the Bluetooth® device are connected via LDAC, the progress. When charging is completed, the power/pairing LED ∫ Using the detachable cord (supplied) problem may be solved by changing the sound quality mode on the  will go out. While the unit is turned off, it can be used as normal Bluetooth® device to give priority to connection. For details, refer to • Charging will take approximately 4 hours from empty state to headphones by connecting the detachable cord (supplied). the operating instructions for the Bluetooth® device.  fully charged. (c) You cannot hear the other person. • The power cannot be turned on while charging. • If you connect the detachable cord (supplied) when • Make sure that the unit and the Bluetooth® enabled phone are • Do not use any other USB charging cords except the supplied connected via Bluetooth®, the Bluetooth® connection will turned on.  one. be lost. (The unit turns off.) • Check if the unit and the Bluetooth® enabled phone are connected. • When the battery starts running low, the blinking power/pairing (l D ) • The [Multiple functions button] does not work even while • Check the audio settings of the Bluetooth® enabled phone. Switch  LED will turn from blue to red. A beep will sound every the unit is turned on. the calling device to the unit if it is set to the Bluetooth® enabled 1 minute. When the battery runs out, the power will turn off. phone. (l D ) ∫ Connecting to an airplane audio system • If the volume of the other person’s voice is too low, increase the C Turning the power on/off 1 Connect the unit and the detachable cord (supplied). (c) volume of both the unit and the Bluetooth® enabled phone. Press and hold [Í/I ( )] (a) of this unit for approx. 2 Connect the input plug (d) of the detachable cord Cannot make a phone call. • Check if the Bluetooth® compatible device supports “HSP” or “HFP” 3 seconds until the power/pairing LED (blue) (b) blinks. (supplied) to the airplane adapter (supplied) (e). profile. For details on profiles, see “Listening to music” and “Making a 3 Connect the airplane adapter to the in-flight audio B • A guidance message will be heard, and the power/pairing LED (blue) will blink slowly. system. (f) phone call” in “Owner’s Manual (PDF format)”. Also refer to the operating manual for the Bluetooth® enabled phone.  To turn the power off  Press and hold [Í/I ( )] for approximately 3 seconds. A ∫ Restoring to the factory settings guidance message will be heard, and the power will be turned 1 While the unit is turned off, press and hold [Í/I ( )] for off. at least 5 seconds until the power/pairing LED starts Specifications ® blinking alternately in blue and red. • If the unit is not connected to a Bluetooth device, a guidance ∫ General message will be heard and turn off the unit automatically 2 While the power/pairing LED is blinking alternately in blue  approximately 5 minutes after you have stopped using it. (Auto Power supply DC 5 V, 500 mA and red, slide and hold the [Multiple functions button] power off) (Except for when noise-cancelling is turned ON.) towards “+” and at the same time press and hold (Internal battery: 3.7 V (Li- • Auto power off does not work when the detachable cord [Í/I ( )] for at least 5 seconds. polymer 800 mAh)) (supplied) is connected. • The default settings will be restored after the power/pairing Operating time*1 (SBC) Approx. 20 hours C LED (blue) blinks fast and the unit turns off. Charging time*2 (25 oC Approx. 4 hours D Connecting a Bluetooth® device (77 oF))  ∫ Bluetooth® pairing To remove the battery when disposing Charging temperature range 10 oC to 35 oC (50 oF to 95 oF) 1 In the power-off state, press and hold [Í/I ( )] of this F Operating temperature 0 oC to 40 oC (32 oF to 104 oF)  of this unit unit until the power/pairing LED blinks in blue and red range alternately. Operating humidity range 35%RH to 80%RH 2 Select “RP-HD605N” (a) from the Bluetooth® device’s The following instructions are not intended for repairing purposes but for the disposal of this unit. This unit is not (no condensation) menu. • If prompted for a passkey, input the passkey “0000 (four restorable once disassembled. Mass (Weight) Approx. 268 g (X.X oz) • When disposing of this unit, take out the battery ® zeros)” of this unit. ∫ Bluetooth section installed in this unit and recycle it. • When the power/pairing LED (blue) blinks twice every D approx. 2 seconds, pairing (registration) is completed. • Disassemble after the battery runs out. • Keep disassembled parts out of reach of children. Frequency band 2402 MHz to 2480 MHz (Connection established) Supported profiles A2DP, AVRCP, HSP, HFP Bluetooth Regarding the handling of used batteries ∫ Connecting a paired Bluetooth® device Supported codec SBC, Qualcomm® aptXTM, • Insulate the terminals with adhesive tape or similar material. Qualcomm® aptXTM HD, Bluetooth ON 1 Turn on this unit. • Do not disassemble. 2 Perform steps 2 of “Bluetooth® pairing”. (l above) LDACTM • When the power/pairing LED (blue) blinks twice every ∫ Batteries • Do not heat or expose to flame. *1 It may be shorter depending on the operating conditions. approx. 2 seconds, pairing (registration) is completed. *2 Time taken to recharge from empty to full.  RP-HD605N • Do not leave the battery(ies) in a car exposed to direct sunlight (Connection established) for a long period of time with doors and windows closed. • Battery mishandling can cause electrolyte leakage which can E Using the headphones damage items the leaked fluid comes into contact with. If electrolyte leaks from the battery, consult your dealer. Wash When using the functions below that are indicated with the E [ ] mark, connect the Bluetooth® device and the unit. thoroughly with water if electrolyte comes in contact with any  part of your body. The Bluetooth® word mark and logos are registered trademarks ∫ Listening to music [ ] • When disposing of the batteries, please contact your local owned by the Bluetooth SIG, Inc. and any use of such marks by Select and play the music on the Bluetooth® device. authorities or dealer and ask for the correct method of disposal. Panasonic Corporation is under license. 1 Remove the left ear pad. Other trademarks and trade names are those of their respective • The selected music is output to the speakers of the unit. owners. ∫ Remote controlling (Available only if your Bluetooth® 2 Remove the 4 screws Siri® is registered trademark of Apple Inc.  device supports “AVRCP”) 3 Remove the part A in step 2. QR Code is a registered trademark of DENSO WAVE (Operation example of [Multiple functions button] (a)) 4 Remove the battery, and cut off the wires one by one with INCORPORATED. scissors. Play / Pause: Press [Multiple functions button]. Android is a trademark of Google Inc. Increase the volume: Slide the [Multiple functions button] LDAC and LDAC logo are trademarks of Sony Corporation. towards “+”. • Sliding and holding towards “+” Qualcomm aptX is a product of Qualcomm Technologies International, Ltd. allows you to continuously raise Qualcomm is a trademark of Qualcomm Incorporated, registered in the volume. Troubleshooting the United States and other countries, used with permission. aptX is Decrease the volume: Slide the [Multiple functions button] Before requesting service, make the following checks. If you are in a trademark of Qualcomm Technologies International, Ltd., towards “-”. doubt about some of the check points, or if the remedies indicated in registered in the United States and other countries, used with • Sliding and holding towards “-” the chart do not solve the problem, refer to “Customer Services permission. allows you to continuously lower Directory” on the front page if you reside in the U.S.A. Other system names and product names appearing in this document the volume. are in general the registered trademarks or trademarks of the The unit does not respond. Forward to the start of respective developer companies. • This unit can be reset when all operations are rejected. To reset the next track: Press [Multiple functions button] Note that the TM mark and ® mark do not appear in this document. unit, connect the unit to a computer using the USB charging cord. twice quickly. (The pairing device information will not be deleted.) Return to the start of current track: Press [Multiple functions button] Cannot charge the unit. /The power/pairing LED blinks during third quickly. charging. • Make sure the computer is turned on and is not on standby or sleep Fast forward: Press the [Multiple functions button] mode. twice quickly; hold the second • Is the USB port you are currently using working properly? If your press. computer has other USB ports, unplug the connector from its current  Fast rewind: Press the [Multiple functions button] port and plug it into one of the other ports. three times quickly; hold the third • If the measures mentioned above are not applicable, unplug the press. USB charging cord and plug it in again.  • If the charge time and operating time become shortened, the battery   ∫ Making a phone call [ ] may have run down. (Number of charging times of the installed 1 Press [Multiple functions button] (a) on the unit and battery: Approximately 300.) answer the incoming call. The power/pairing LED does not light during charging. / Charging 2 Start talking. takes longer. • Is the USB charging cord connected firmly to the USB terminal of the 3 Press [Multiple functions button] to end the phone call. computer? (l B ) F • (HFP only) Reject a call / Change the call device: Press [Multiple functions button] twice quickly. • Make sure to charge in a room temperature between 10 oC and 35 oC (50 oF and 95 oF). • You can have the Bluetooth® enabled phone make phone calls The power does not turn on. 1 2 by using the microphone of the unit and an app of the • Is the unit being charged? The power cannot be turned ON during Bluetooth® enabled phone. charging. (l B ) (l right, “Activating a voice functions”) The device cannot be connected. ∫ Using noise-canceling • Delete the pairing information for this unit from the Bluetooth® device, then pair them again. (l D ) Press the [NC] button to adjust the volume of the playback device. No sound. • The unit switches between three modes, A, B, and C, each • Make sure that the unit and the Bluetooth® device are connected  correctly. (l D ) time you press the [NC] button. • Check if music is playing on the Bluetooth® device. 3 • When noise-canceling is set to ON, the noise-canceling • Make sure that the unit is turned on and the volume is not set too LED lights in green. low. • Pair and connect the Bluetooth® device and the unit again. To switch between ON and OFF: (l D ) Press and hold [NC] button for at least 5 seconds. • Check if the Bluetooth® compatible device supports “A2DP” profile. For details on profiles, see “Listening to music” in “Owner’s Manual ∫ Using the ambient sound enhancer (PDF format)”. Also refer to the operating manual for the Bluetooth®  Place your hand over the ambient sound enhancer compatible device. sensor panel (R side) so that its entire surface is covered. (b) • Noise-canceling will turn OFF temporarily and the volume of the 4 playback sound will be lowered. To switch between enabled and disabled: Slide and hold the [Multiple functions button] (a) towards “+” and at the same time press and hold [NC] for at least 5 seconds. To set the ambient sound enhancer function to always- on mode: Press [NC] button twice quickly. • To deactivate always-on mode, press the [NC] button or place your hand over the ambient sound enhancer sensor panel (R side) so that its entire surface is covered.


Document Created: 2019-09-15 06:05:01
Document Modified: 2019-09-15 06:05:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC