CTR manual

FCC ID: AB6CTR2807M

Users Manual

Download: PDF
FCCID_104086

NTP #: 411-1333-921 Draft 01.01 June 2000 CTR 28-07 GHz MMIC Quick Reference Guide Product Overview The CTR 28-07 MMIC (NTVG16CA) outdoor transceiver is a customer premise transceiver designed to operate in various Receiver (Rx) and Transmitter (Tx) frequency bands. It is a Nortel Networks Reunion product that operates in con- junction with base station products, as well as customer premise products. It is compatible with Reunion’s Release 1.2 and 1.3 equipment. CTR 28-07M Transceiver Figure 1: CTR 28M Block Diagram Tx IF/DC Input Lightening Protector Tx IF Input Test Port Tx RF Output/ Rx RF Input (Test Point ‘A’) Transceiver Rx IF Section Output Test Port Rx IF Output Lightening Protector

2 CTR 28-07 MMIC Specification Table 1: CTR 28-07M Technical Specifications TX IF Input RF Output Frequency Range 28-07M 500-650 MHz 28.20-28.35 GHz Output Level (P1 dB) ≥23 dBm, -40° to +55° C Output Level (IP3) +31.0 dBm Input Impedance 50 Ohms Input/Output Connector N-Type Female N/A Gain (not including antenna) 32.0 ±0.6 dB Gain Variation ±5.0 dB over all conditions Gain Flatness ±1.9 dB over bandwidth Frequency Stability <±4 ppm over all conditions Noise Power -115 dBm/Hz TX Test Port SMA female TX IF Test Port Coupling -16±1 dB Antenna CTR Frequency 27.5-28.31.3 GHz Frequency Band 2731 Gain 36.2 dBi, minimum Polarity Cross Pole (dual polarization) Beam Width (azimuth) 2.5±TBD°, minimum Beam Width (elevation) 2.5±TBD°, minimum Cross-Polarization Discrimination > 30.0 dB Diameter 14" (35 cm) 411-1333-921 Draft 01.01 June 2000

3 RX RF Input IF Output Frequency Range 28-07M 29.10-29.25 GHz 250-400 MHz Input/Output Connector N/A N-Type Female Output Impedance 50 Ohms Gain (not including antenna) 28±0.6 dB, minimum Gain Variation ±5.0 dB over all conditions Gain Flatness ±1.9 dB over bandwidth Frequency Stability <±4 ppm,over all conditions Noise Figure ≤ 7.2 dB, maximum LO Leakage -35 dBm, maximum RX Test Port SMA female RX IF Test Port Coupling -14±1 dB Power Requirements CTR Input Voltage -48 VDC, 3.5A. max diplexed with TX cable Input Current <1.5 Amp Input Power 55 Watts, maximum Environmental CTR Humidity 100% condensing Altitude 10,000 feet Wind Resistance 50m/second on all surfaces Operating Temperature -40° to +55°C Storage Temperature Range -55° to +70°C Mechanical CTR Size (Length x Width) 10.55" x 11.63" (26.4 x 29 cm) Weight without brackets 25 lbs. (11.1 KG) CTR 28-07 GHz MMIC Quick Reference Guide

Converted Frequency Formula Use the following formula to calculate the converted frequency: TX: ƒRF OUT (GHz) = 28.85 (GHz) - ƒIF IN (MHz) RX: ƒIF OUT (MHz) = ƒRF INPUT (GHz) - 28.85 (GHz) Note: The antenna has an option of a hydrophobic coating that can help to reduce ice build-up effect. Note: Vent holes are covered with a GoretexTM patch. Note: The transceiver mounts to a vertical pole of 2.5” to 4.5” outside diame- ter. It has a range of motion of 90° over and -60° under horizon. The bases of the antenna mount can rotate ±180°. Note: The module connector is N-Type female. The receive IF input/output cables present a male N-Type connector. The Tx IF and the Rx IF test ports are SMA-Type female. Technical Assistance Contact Information In case additional technical assistance is required, or the transceiver unit is damaged upon receipt, contact Nortel Networks. Nortel Networks Broadband Wireless Access (BWA) provides 24-hour customer service and technical support to ensure your service operation is trouble-free. If you have questions or need technical support, contact Nortel Networks Broadband Wireless Access at the following telephone numbers: • In the USA and Canada, call 972-BWA-ETAS/972-292-3827 Information is subject to change without notice. Nortel reserves the right to make changes in design or components as progress in engineering and manufacturing may warrant. © 2000 Northern Telecom Ltd.


Document Created: 2000-06-09 10:34:41
Document Modified: 2000-06-09 10:34:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC