03 FCC RF Exposure_DTS

FCC ID: A94424096

RF Exposure Info

Download: PDF
FCCID_4021748

                                                                                       April 26, 2018
UL Japan, Inc.
4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan

FCC ID: A94424096

To whom it may concern,

We, UL Japan, Inc, hereby declare that Powered sound bar with wireless link, model: 424096 (FCC
ID: A94424096) of Bose Corporation is exempt from RF exposure SAR evaluation as its output power
meets the exclusion limits stated in KDB 447498D01(v06).

KDB 447498D01(v06) has the following exclusion for portable devices:
The 1g and 10g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50
mm are determined by:

[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]
ꞏ[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where
•f(GHz) is the RF channel transmit frequency in GHz
•Power and distance are rounded to the nearest mW and mm before calculation
•The result is rounded to one decimal place for comparison

The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for
transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance
is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion.

This device has f = 2.48 GHz and distance = 5 mm (minimum separation distance: 5 mm was used in
the calculation) and the maximum average output power (Time average) was 3 mW


So for this device:
3 mW[maximum average output power]/5 mm[minimum separation distance]*√2.48 = 0.9
*This is less than 3.0, so no SAR is required.
Even taking into account the tolerance, this device can be satisfied with the limits.

Thank you for your attention to this matter.




Takayuki Shimada
Leader of Ise EMC Lab.
Consumer Technology Division
UL Japan, Inc.




UL Japan, Inc. Ise EMC Lab
4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan
T:: +81.596.24.8999 / F:: +81.596.24.8124 / W:: ul.com/jp



Document Created: 2018-09-14 16:24:09
Document Modified: 2018-09-14 16:24:09

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC