RF Exposure Info

FCC ID: A94404590

RF Exposure Info

Download: PDF
FCCID_1172521

Wireless Transceiver Test Report Certificate # 1514.1 FCC ID:A94404590 IC ID:3232A‐404590 1. MPE calculation The peak output power (conducted) as documented in section 6.3 of this report is 12.8dBm or 19.1mW maximum. The maximum output power of the device (peak) is 12.8 dBm or 19.1mW. This is less than 60/f (GHz) = 24 mW, therefore SAR testing is not required. Ignoring the duty cycle (source based time averaging), at a distance of 20cm from the product (typically a table mounted device, categorized as “mobile” in FCC OET Guide65), and allowing for a 2dBi (1.58 numerical ) antenna gain, the power density would be P/area = 19.1mW x 1.58 / 5026 cm2 = .00600mW/ cm2 This is well below the exposure limit of 1 mW/cm2 for the general population. Without written permission of laboratory, this report shall not be reproduced except in full. Form: FL292030 rev C Report Number: EMC.404590.09.222.1 Page 1 of 1 Bose Corporation, 1 New York Ave, Framingham, MA 01701, USA Tel: (508) 766‐6000 Fax: (508) 766‐1145


Document Created: 2009-09-11 10:39:34
Document Modified: 2009-09-11 10:39:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC