Manual

FCC ID: A94404096A

Users Manual

Download: PDF
FCCID_1139699

English Dansk Deutsch Español Français Italiano Nederlands Svenska SOUNDLINK™ WIRELESS MUSIC SYSTEM 1

Svenska Nederlands Français Italiano Deutsch Español English Dansk SAFETY INFORMATION Please read this owner’s guide • Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable. Please take the time to follow the instructions in this owner’s guide carefully. It will help you to properly use your new Bose® product and enjoy its • Do not place any naked flame sources, such as lighted candles, on or near features. Please save this owner’s guide for future reference. the apparatus. • Contains small parts that may be a choking hazard. Not suitable for children under age 3. • Before use, charge the battery using only the power supply provided with the system. Refer to charging instructions in the system owner’s guide. Do not continue charging the battery if it does not reach full charge within the specified charging time. Overcharging may cause the battery to become hot, rupture, or ignite. If you see any heat deformation or leakage, properly dispose of the battery. • Do not attempt to charge the battery in temperatures outside the range of 32°-104°F (0°-40°C). • Keep batteries out of the reach of children and pets. The lightning flash with arrowhead symbol within an equilateral • If the battery begins to leak, do not allow the liquid to come in contact with triangle alerts the user to the presence of uninsulated, dangerous your skin or eyes. If contact has been made, wash the affected area with voltage within the system enclosure that may be of sufficient plenty of water and seek medical advice immediately. magnitude to constitute a risk of electric shock. • Do not expose the product or battery to excessive heat, including direct The exclamation point within an equilateral triangle alerts the user sunlight or fire and storage or use inside cars in hot weather, where it can to the presence of important operating and maintenance be exposed to temperatures in excess of 140°F (60°C). Doing so may instructions in this owner’s guide. cause the battery and power supply to generate heat, rupture, or ignite. Using the product in this manner also may result in a loss of performance WARNINGS and CAUTIONS and a shortened life expectancy. • To reduce the risk of fire or electric shock, do not expose this product to • If the battery is damaged and ignites, do not use water to extinguish rain or moisture. The product shall not be exposed to dripping or splash- flames. Instead, use a functioning fire extinguisher. ing, and objects filled with liquids, such as vases, shall not be placed on • Do not step on, throw, or drop batteries or the power supply or expose or near the product. As with any electronic products, use care not to spill them to a strong shock. Do not pierce, crush, dent, or deform the liquids into any part of the product. Liquids can cause a failure and/or a batteries or power supply in any way. If either becomes deformed, fire hazard. properly dispose of it. • The power supply must be used indoors only. It is neither designed nor • Do not short-circuit batteries. Avoid storing them around metal objects tested for use outdoors, in recreation vehicles, or on boats. such as keys, pocket change, paper clips, and jewelry. • Make no modifications to the product or accessories. Unauthorized alter- • Do not dismantle, open, or shred the battery. ations may compromise safety, regulatory compliance, and system per- formance, and will void the warranty. • The battery is intended to be used only with the Bose product and the power supply provided with it. ii

English Dansk Deutsch Español Français Italiano Nederlands Svenska • This product is intended to be used only with the power supply provided. 7. Do not block any ventilation openings. Install in accordance • After extended periods of storage, it may be necessary to charge and with the manufacturer’s instructions – To ensure reliable operation discharge the battery several times to obtain maximum performance. of the product and to protect it from overheating, put the product in a position and location that will not interfere with its proper ventilation. • The cells in the batteries perform best when operating at normal room For example, do not place the product on a bed, sofa, or similar surface temperature, 70°F (20°C). that may block the ventilation openings. Do not put it in a built-in • Replace the SoundLink™ system battery only with a genuine replacement system, such as a bookcase or a cabinet that may keep air from flowing battery from Bose or an authorized Bose dealer. Bose cannot warrant the through its ventilation openings. safety and compatibility or assure the operability of batteries from other 8. Do not install near any heat sources, such as radiators, heat manufacturers for use in operating the SoundLink system. DO NOT attempt registers, stoves, or other apparatus (including amplifiers) that to use the SoundLink system battery to power other electronics. Doing so produce heat. may result in permanent damage to your system and/or personal injury. 9. Only use attachments/accessories specified by the manufac- • Product labels are located on the bottom of the product and on the turer. battery. 10. Protect the power cord from being walked on or pinched, Please dispose of a used or damaged battery promptly and particularly at plugs, convenience receptacles, and the point properly, following all local regulations. Do not incinerate. where they exit from the apparatus. To return a system battery for recycling, contact Bose or your Bose 11. Unplug this apparatus during lightning storms or when unused dealer. In the United States only, call 1-800-905-2180 or visit the for long periods of time – to prevent damage to this product. Bose® website at www.Bose.com. For other regions, see the contact 12. Refer all servicing to qualified service personnel. Servicing is information included in the carton. required when the apparatus has been damaged in any way: such as power supply cord or plug is damaged; liquid has been This product conforms to the EMC Directive 2004/108/EC, the Low spilled or objects have fallen into the apparatus; the apparatus Voltage Directive 2006/95/EC and the RTTE Directive 1999/5/EC. has been exposed to rain or moisture, does not operate nor- The complete Declaration of Conformity can be found at mally, or has been dropped – Do not attempt to service this product www.Bose.com/static/compliance/index.html. yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Bose to be referred to an autho- Important Safety Instructions rized service center near you. 1. Read these instructions – for all components before using this product. 13. To prevent risk of fire or electric shock, avoid overloading wall 2. Keep these instructions – for future reference. outlets, extension cords, or integral convenience receptacles. 3. Heed all warnings – on the product and in the owner’s guide. 14. Do not let objects or liquids enter the product – as they may touch dangerous voltage points or short-out parts that could result in a 4. Follow all instructions. fire or electric shock. 5. Do not use this apparatus near water or moisture – Do not use 15. See product enclosure for safety-related markings. this product near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, or anywhere else that water is 16. Use proper power sources – Plug the product into a proper power present. source, as described in the operating instructions or as marked on the product. 6. Clean only with a dry cloth – and as directed by Bose Corporation. Unplug this product from the wall outlet before cleaning. iii

Svenska Nederlands Français Italiano Deutsch Español English Dansk Information about products that generate electrical noise Note: The round connector on the bottom of the SoundLink™ speaker is for Bose® factory service use only. U.S.A. only This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, this is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: • Re-orient or relocate the receiving antenna. Service connector – • Increase the separation between the equipment and receiver. For factory use only • Connect the equipment to an outlet on a different circuit than the one to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Any changes to this device not expressly approved by Bose Corporation may void the user’s authority to operate this device. Canada • This Class B digital apparatus complies with the Canadian ICES-003 Class B specification. For your records • The radio communication device incorporated into this apparatus meets all requirements of the Industry Canada standard RSS-310. Serial number (on the bottom panel): ________________________________ Purchase date: ___________________________________________________ Dealer name: _____________________________________________________ Dealer phone: ____________________________________________________ SoundLink and the distinctive design of the SoundLink system are trade- Please keep your sales receipt with this owner’s guide. marks of Bose Corporation in the U.S. and other countries. iv

English Dansk Deutsch Español Français Italiano Nederlands Svenska INTRODUCTION Overview If any part of the product appears to be damaged, do not attempt to use it. Contact your authorized Bose dealer Thank you for purchasing the SoundLink™ wireless immediately or call Bose Customer Service. Refer to the music system. Now you can enjoy music from your address list enclosed in the carton for contact computer in any room you choose, wirelessly. information. Features: • Simple wireless connection using the SoundLink USB key – no software to install Power supply • Long-range wireless link lets you listen in and around Power AC adapter(s) your home supply • Rechargeable lithium-ion battery provides hours of Bose® performance SoundLink • Handy remote included Remote USB key SoundLink control speaker Unpacking Check the carton for all the parts shown. Save the carton and packing materials, which provide the safest way to transport this product. 1

Svenska Nederlands Français Italiano Deutsch Español English Dansk SYSTEM SETUP Activating the system 3. Plug the DC power cord on the power supply into the DC POWER connector on the SoundLink speaker. Initially, the battery is not fully charged and may be in a protection or inactive mode. Power supply To activate your new system and charge the battery: 1. Place the SoundLink™ speaker on a flat, stable surface. DC POWER 2. Attach the AC adapter for your region (more than one may be included) to the power supply. Your system includes one of these two types of power supplies. AC adapter DC power cord 4. Plug the power supply into a live AC outlet. CAUTION: Use this system only with the provided power supply or a replacement power supply from Bose Corporation. IMPORTANT IN CHINA AND KOREA ONLY: An AC adapter for use in your country is labeled on the Note: To reach full charge, the battery requires charging for a outside of the small bag that contains it. Be sure to use minimum of 10 hours. See “Charging the battery” on page 9. that adapter only. 2

English Dansk Deutsch Español Français Italiano Nederlands Svenska SYSTEM SETUP Connecting your computer 3. Lift the antenna on the SoundLink USB key to the vertical position and plug it into a USB port on your 1. Make sure that the wireless source light on the computer. SoundLink™ speaker is flashing. Confirm that the SoundLink USB key power light If not, press the remote wireless source button. The turns on and starts flashing. wireless source light should start flashing. Antenna Wireless source light Wireless source button Power light and Disconnect-reconnect button 4. Wait a few seconds for your computer to recognize 2. Make sure your computer is on and all music applica- the SoundLink USB key. When ready, it will automati- tions are closed. cally establish a wireless link with the SoundLink speaker. This may take up to 20 seconds the first time, much less after that. 3

Svenska Nederlands Français Italiano Deutsch Español English Dansk SYSTEM SETUP You may notice the wireless source light and USB key power light start flashing faster as the SoundLink™ If you don’t hear music from system establishes a wireless connection. the SoundLink speaker When both lights change from flashing to always Mac users: Go to System Preferences, Sound on, and you hear a tone from the speaker, your settings and make sure “Bose SoundLink Audio” is the SoundLink™ system is ready to use. selected Output device. 5. Open the music application on your computer, or navigate to an Internet radio station and play the music you want to hear. To disconnect or reconnect, press the button on the end of the SoundLink USB key. See “Using the USB key” on page 5 for more information. Note: While listening to music through the SoundLink wireless music system, you will not hear music through your computer’s internal speakers or sound card. Both Mac and PC users: You may need to restart your music application. 4

English Dansk Deutsch Español Français Italiano Nederlands Svenska OPERATION System status lights Using the USB key The status lights on the SoundLink™ speaker front panel The USB key will automatically connect your computer indicate source selection and battery condition. with the SoundLink speaker whenever you insert it into a USB port. AUX AUDIO IN source (page 7) Off: ..... AUX source not selected On: ..... AUX source is selected Wireless source Off: ................... No wireless connection Fast flashing: ... Wireless source is connecting On: ................... Wireless source is connected Brief flash: ........ Wireless source is (every 3 sec) selected, but discon- Disconnect-reconnect button nected at the computer Press to disconnect or reconnect the Battery SoundLink speaker • Indicates battery level during Power light portable operation. See “Operating Off: .......................USB key is not powered on battery power” on page 8. Slow flashing: ......Powered and available for connecting • Indicates battery charging status. to the SoundLink speaker See “Charging the battery” on Fast flashing: ........Establishing a connection page 9. On:........................Connected to the SoundLink speaker Note: Each button pressed on the remote causes the light for the selected source to blink. 5

Svenska Nederlands Français Italiano Deutsch Español English Dansk OPERATION Remote control Press any remote button except Off to Press to turn off the SoundLink system. turn on your SoundLink™ system. Press to play or pause the current track on your Each time you press a remote button, the computer. front panel light for the selected source flashes briefly. Press to select your computer as a wireless source. Depending on the music application you are using on your computer, you can use Press to select the AUDIO IN source. the play/pause and skip buttons to control the music playback. Press to increase (+) or decrease (–) the volume. Play/Pause and skip buttons may not Press and hold for faster adjustment. work for Internet radio stations or some music applications. Press to skip to the beginning of the next track. Press to skip to the beginning of the previous track. Note: This remote does not control any device plugged into the AUDIO IN connector. 6

English Dansk Deutsch Español Français Italiano Nederlands Svenska OPERATION SoundLink™ speaker volume Adding another music source controls You can use another audio device, such as a portable digital music player, with your SoundLink system. This Touch-sensitive volume controls are located on the right requires using a stereo audio cable (not provided) that is side of the SoundLink™ speaker. These raise and lower appropriate for the connected audio device and has a the SoundLink system volume in the same way as the 3.5mm mini plug on the end that plugs into the AUDIO IN remote control volume buttons. connector on the SoundLink system. 1. Plug the cable from the audio device into the AUDIO IN connector on the back of the SoundLink speaker. 2. Press the remote AUX button. 3. Set the connected device to full volume, then use the SoundLink system volume buttons to adjust the level. System volume touch controls • Touch to increase ( ) or decrease ( ) the volume. • Touch and hold for faster adjustment. AUDIO IN 7

Svenska Nederlands Français Italiano Deutsch Español English Dansk OPERATION Operating on battery power Manual battery check The battery light is normally off to conserve battery A fully charged battery provides approximately three power. To check the charge level, press and hold the hours of use if the SoundLink™ system is set to remote Off button and observe the battery light color. maximum volume. However, the rate of battery discharge varies with the type of music played and the Green: ............. 70% or more of full charge volume setting. You can extend the battery operating Yellow: ............. 20% to 70% of full charge time significantly by lowering the volume. Flashing red: ... 20% or less (charging needed) The battery status light on the SoundLink speaker indicates when charging the battery is necessary. See When to replace the battery “Charging the battery” on page 9. The battery should be replaced when: • The battery status light remains yellow after 10 hours of charging Flashing red: ... 20% or less of full • The period of battery operation decreases charge remaining (charging needed) Battery protection mode If the SoundLink system is unplugged and unused for more than 14 days, it enters battery protection mode to preserve battery power. Your system is in this state when you first set it up. To reactivate your SoundLink system, connect the power supply to the SoundLink speaker and charge the battery. 8

English Dansk Deutsch Español Français Italiano Nederlands Svenska OPERATION Charging the battery Taking the system with you To charge the battery, plug the power supply into a live To turn off the SoundLink system and pack it for travel: AC outlet and plug the cord into the DC POWER 1. Unplug the SoundLink USB key and lower the connector on the back panel of the SoundLink speaker. antenna to its compact position. Recommended charging time is 10 hours. The battery light on the speaker indicates charging status. 2. If necessary, unplug the power supply from the AC outlet and the SoundLink speaker. Yellow: ... Battery charging Off: ......... Charging cycle done 3. Wrap the power supply cord around the spool built into the top of the power supply. Slide the ball toward the end of the cord as needed and press it into the spool to hold the cord in place. Ball Spool 9

Svenska Nederlands Français Italiano Deutsch Español English Dansk CARE AND MAINTENANCE Replacing the SoundLink™ 2. Carefully pull the battery away from the back of the SoundLink speaker. speaker battery To purchase replacement batteries, contact your local authorized Bose dealer or visit www.Bose.com to order from Bose directly. To contact Bose by phone, refer to the contact list provided in the carton. WARNING: Replace the battery only with a genuine Bose® replacement battery. Bose cannot warrant the safety and compatibility or assure the operability of batteries from other manufacturers when used in the SoundLink system. 1. Using your thumbnail or a coin, push in the slotted 3. On the new battery, turn the slotted knob so the slot knob and turn it counterclockwise to unlock the is horizontal. battery. Slotted knob Slotted knob (horizontal) Multi-pin connector 10

English Dansk Deutsch Español Français Italiano Nederlands Svenska CARE AND MAINTENANCE 4. Plug the battery into the multi-pin connector. WARNINGS: • Keep the remote control battery away from children. It may 5. Push in the slotted knob and turn it clockwise until cause a fire or chemical burn if mishandled. Do not recharge, the slot is vertical. disassemble, heat above 100ºC (212ºF), or incinerate. • Dispose of used batteries promptly. Replace only with a battery 6. Connect the power supply and charge the battery. of the correct type and model number. • Danger of explosion if battery is incorrectly replaced. Replace only with Duracell, Eveready, Energizer, Maxell, Toshiba, or Replacing the remote battery Shun Wo CR2032 or DL2032 3-volt lithium battery. When the remote stops operating or its range seems reduced, it is time to change the remote battery. Replace Cleaning it with type CR2032 or DL2032. To clean the exterior surface of your product, you can 1. Using a coin, turn the battery wipe it using a soft, dry cloth. You can also lightly cover slightly counterclockwise. vacuum the grille. • Do not use solvents, chemicals, or sprays. • Do not allow liquids to spill or objects to drop into any 2. Remove the used battery and openings. insert the new one. Be sure the battery is plus (+) side up. Troubleshooting 3. Reseat the cover and turn it If you experience difficulty with your SoundLink™ clockwise until it locks into place. wireless music system, use the following table to try to solve the problem. If the problem persists, see “Contacting customer service” on page 14. 11

Svenska Nederlands Français Italiano Deutsch Español English Dansk CARE AND MAINTENANCE Problem What to do My computer does not • Remove the SoundLink USB key from your computer, wait 30 seconds and insert it again. recognize the SoundLink™ • If you are using a USB hub, make sure the hub is powered. USB key. • Try a different USB port. If you are using a powered USB hub, try moving the SoundLink USB key to a USB port on the computer. • Remove the SoundLink USB key, restart your computer, and insert the USB key again. • Refer to the owner’s guide, help system, or technical support for your computer to learn how to detect and install new hardware. My computer does not • Decrease the distance between the speaker and your computer. connect with the • If you are using a desktop computer, try moving the SoundLink USB key to a USB port on the front SoundLink speaker. The of the computer (if possible) or use a USB extension cable. wireless source light blinks • Remove the SoundLink USB key from your computer, wait 30 seconds and insert it again. continuously. • Disconnect the power supply from the SoundLink speaker, remove the battery from the SoundLink speaker and install it again. Reconnect the power supply. • Try restoring the wireless link between the speaker and the USB key. See “Restoring the wireless link” on page 14. • Try moving the speaker closer to your computer or away from possible sources of interference such as another wireless device, a microwave oven, or wireless computer network router. The SoundLink system • Make sure there is a clear path between the remote and the SoundLink system. does not respond to • Using a clean, dry cloth, wipe the small lens on the front end of the remote. remote control commands. • Try the remote from a different location. You may be experiencing interference from bright room lights or sunlight. • Make sure the remote battery is installed correctly or replace it if it is old. • Check the SoundLink speaker battery status light. Charge the battery if necessary. • Make sure your music playback program is selected in the foreground on your computer. • Be aware that remote commands may not operate Internet radio stations. 12

English Dansk Deutsch Español Français Italiano Nederlands Svenska CARE AND MAINTENANCE Problem What to do I cannot hear music playing • Close or quit the music application on your computer and restart it. from my computer on the • Press the SoundLink USB key button. Unplug the USB key, wait 5 seconds, and plug it in again. SoundLink™ speaker. • Increase the SoundLink system volume. • Check the SoundLink speaker battery status light. Charge the battery if necessary. • Make sure the volume on your computer is turned up and is not muted. • Make sure your computer music application is running. • Press the SoundLink USB key button to restore the wireless link. • Make sure “Bose SoundLink Audio” is selected as the audio output device for your computer. I cannot hear music from • Press the AUX button on the remote and check that the AUX source light is on. the AUX source. • Make sure your connected device is on and playing. • Increase the volume level on the device. • Increase the SoundLink system volume. Poor reception, or audio is • Change the angle of the antenna on the SoundLink USB key. dropping out • Rotate the SoundLink speaker, or move a few feet to a new location. • Connect the SoundLink USB key to a different USB port on your computer or try using a powered USB hub. • Move the SoundLink speaker away from known wireless sources of interference, such as micro- waves, cordless phones, mobile phones, and Wi-Fi routers. • Use a USB extension cable, available for purchase at computer stores. These cables have a normal USB male connector on one end and a female connector on the other. Plug the USB key into the female end and plug the male end into the computer. • If you continue to experience reception problems, contact Bose customer service. 13

Svenska Nederlands Français Italiano Deutsch Español English Dansk CARE AND MAINTENANCE Restoring the wireless link Limited warranty If the SoundLink speaker and USB key fail to connect, try the following to restore the wireless link: Your SoundLink wireless computer speaker system is covered by a limited transferable warranty. Details of the 1. Turn on the SoundLink speaker. limited warranty are provided on the product registration 2. Press and hold the wireless source button until the card that is included in the carton. Please refer to the wireless source light starts flashing. card for instructions on how to register. Failure to register will not affect your limited warranty rights. 3. Press and hold the USB key button until the USB key power light starts flashing. What you must do to obtain limited warranty service 4. Check to see if both indicator lights change from Return the product, with proof of purchase from an flashing to always on. authorized Bose dealer, using the following procedures: If you hear a tone from the speaker, it has success- 1. Contact the Bose organization in your country/region fully connected with the USB key. (visit http://global.Bose.com for Bose contact infor- mation in your country/region) for specific return and Contacting customer service shipping instructions. 2. Label and ship the product, freight prepaid, to the For questions about the SoundLink™ wireless music address provided by the Bose organization in your system, contact your local Bose dealer. To contact Bose country. directly, see the address list included with your SoundLink system or visit http://owners.Bose.com on 3. Place any necessary return authorization number the Internet. prominently on the outside of the carton. Cartons not bearing a return authorization number, where required, will be refused. 14

English Dansk Deutsch Español Français Italiano Nederlands Svenska CARE AND MAINTENANCE Technical information Power supply rating Input: 100-240V 50/60Hz, 1A Output: 20V, 2A Dimensions 6.7"H x 12.0"W x 5.1"D (17.0 cm x 30.7 cm x 12.8 cm) Weight 5.2 lb (8.4 kg), including battery Computer system recommendation Microsoft Windows® XP or Vista Mac OS® X 10.4 or higher Bluetooth® QD ID SoundLink™ speaker: B015402 SoundLink USB key: B015403 The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license. 15

Svenska Nederlands Français Italiano Deutsch Español English Dansk ©2009 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM000000 Rev.00 16

This device complies with FCC and Industry Canada RF radiation exposure limits set forth for general population. It must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1995/5/CE (R&TTE directive) and other applicable Directives. The detailed Declaration of Conformity can be found on www.Bose.com/compliance. Erratum: Canadian standard RSS310 does not apply to this product. Temperature range for use: 0°-45°C (32°-113°F) QD ID: B015404 ©2009 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM324537 Rev.00


Document Created: 2009-07-15 10:36:41
Document Modified: 2009-07-15 10:36:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC