User Manual

FCC ID: A94403155M

Users Manual

Download: PDF
FCCID_1242105

Cover_8.5x6.5_OP Guide_3L.fm Page 1 Monday, November 9, 2009 4:34 PM LIFESTYLE V35/V25 HOME ENTERTAINMENT SYSTEMS ® LIFESTYLE T20/ T10 HOME THEATER SYSTEMS ® ©2010 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM324446 Rev.00 Operating Guide | Guía del usuario | Guide d’utilisation

ResoluteVigilanteOG.book Page ii Monday, December 7, 2009 9:48 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English SAFETY INFORMATION Please read this guide CAUTIONS: Please take the time to follow the instructions in this guide • Make no modifications to the system or accessories. carefully. They will help you set up and use your system properly Unauthorized alterations may compromise safety, so you can enjoy its advanced features. Please save this guide regulatory compliance, and system performance, and for future reference. may void the warranty. • Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme volume when using headphones, especially for extended periods. Notes: • Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable. The lightning flash with arrowhead symbol within an • The product must be used indoors. It is neither designed nor equilateral triangle alerts the user to the presence of tested for use outdoors, in recreation vehicles, or on boats. uninsulated, dangerous voltage within the system • This product is intended to be used only with the power supply enclosure that may be of sufficient magnitude to constitute provided. a risk of electric shock. • The product label is located on the bottom of the product. The exclamation point within an equilateral triangle alerts the user to the presence of important operating and Additional safety information maintenance instructions in this guide. See the additional instructions on the Important Safety Information sheet enclosed in the shipping carton. WARNINGS: • To reduce the risk of fire or electrical shock, do not expose the Batteries product to rain or moisture. Please dispose of used batteries properly, following any • Do not expose this apparatus to dripping or splashing, and do local regulations. Do not incinerate. not place objects filled with liquids, such as vases, on or near the apparatus. As with any electronic products, use care not to Class B emissions spill liquids into any part of the system. Liquids can cause a failure and/or a fire hazard. This device complies with FCC and Industry Canada RF radiation exposure limits set forth for general population. It must not be • Do not place any naked flame sources, such as lighted candles, co-located or be operating in conjunction with any other on or near the apparatus. antennas or transmitters. • Keep the remote control batteries away from children. They This product conforms to all EU Directive requirements as may cause a fire or chemical burn if mishandled. Do not re- applicable by law. The complete Declaration of Conformity charge, disassemble, heat above 100ºC (212ºF), or incinerate. can be found at www.Bose.com/compliance. Dispose of used batteries promptly. Replace only with batteries of the correct type and model number. • Contains small parts that may be a choking hazard. Not suitable for children under age 3. ii

ResoluteVigilanteOG.book Page iii Monday, December 7, 2009 9:48 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 Notice This equipment has been tested and found to comply with the For your records limits for a Class B digital device, pursuant to Part 15 of the FCC Bose recommends that you record your system model rules. These limits are designed to provide reasonable protection information here and the serial numbers both here and on against harmful interference in a residential installation. This your Product Registration Card. equipment generates, uses, and can radiate radio frequency Serial numbers are located on the bottom of the console, and energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio on the connection panel of the Acoustimass® module. communications. However, there is no guarantee that System model name and number (on the carton): interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television LIFESTYLE® ___________________________________________ reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by Serial numbers: one or more of the following measures: Control console:________________________________________ • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. Acoustimass® module:_______________________________ • Connect the equipment to an outlet on a different circuit than Retailer information: the one to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for Dealer name: __________________________________________ help. Dealer phone: __________________________________________ Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to operate this Purchase date: _________________________________________ equipment. Please keep your sales receipt and a copy of your Product Operation is subject to the following two conditions: (1) This Registration card together with this guide. device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ©2010 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without prior written permission. iii

ResoluteVigilanteOG.book Page iv Monday, December 7, 2009 9:48 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English Manufactured under license from Dolby Laboratories. “Dolby” Apple TV is a trademark of Apple, Inc. Xbox is a trademark of and the double-D symbol are trademarks of Dolby Laboratories. Microsoft Corporation. TiVo is a trademark of Tivo, Inc. or its Confidential Unpublished Works. ©1992-1997 Dolby subsidiaries. Other trademarks are property of their respective Laboratories. All rights reserved. owners. This product contains one or more programs protected under international and U.S. copyright laws as unpublished works. They are confidential and proprietary to Dolby Laboratories. Their reproduction or disclosure, in whole or in part, or the production Applicable only for LIFESTYLE® V25 and V35 of derivative works therefrom without the express permission of home entertainment systems Dolby Laboratories is prohibited. ©1992-1996 by Dolby Laboratories, Inc. All rights reserved. “Made for iPod” means that an electronic accessory has been designed to connect Manufactured under license under U.S. Patent #’s: specifically to iPod and has been certified 5,451,942; 5,956,674; 5,974,380; 5,978,762; by the developer to meet Apple performance 6,487,535 & other U.S. and worldwide patents standards. issued & pending. DTS and the Symbol are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of Apple is not responsible for the operation of this device or its DTS, Inc. Product includes software. ©DTS, Inc. All Rights compliance with safety and regulatory standards. Reserved. iPod and iPhone are trademarks of Apple, Inc., registered in Designed with UEI Technology™ Under License from Universal the U.S. and other countries. All other marks are registered Electronics Inc. ©UEI 2000-2002. trademarks and trademarks of Bose Corporation. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. iv

ResoluteVigilanteOG.book Page v Monday, December 7, 2009 9:48 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 CONTENTS INTRODUCTION 1 Using the front console inputs . . . . . . . . . . . . . . . 11 Front USB input . . . . . . . . . . . . . . . . . . . . . . . . . 11 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Front Analog A/V input . . . . . . . . . . . . . . . . . . . 12 System features . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Front HDMI input . . . . . . . . . . . . . . . . . . . . . . . . 12 If you need help . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Changing the image view . . . . . . . . . . . . . . . . . . . 12 YOUR REMOTE CONTROL 2 LISTENING TO THE RADIO (V25 AND V35 SYSTEMS) 13 YOUR CONTROL CONSOLE 5 Selecting the radio . . . . . . . . . . . . . . . . . . . . . . . . 13 Tuning to a station . . . . . . . . . . . . . . . . . . . . . . . . 13 POWER ON/OFF CONTROLS 6 Storing a preset station . . . . . . . . . . . . . . . . . . . . 13 Starting your system . . . . . . . . . . . . . . . . . . . . . . 6 Recalling a preset station . . . . . . . . . . . . . . . . . . . 13 Turning on your TV . . . . . . . . . . . . . . . . . . . . . . . 6 Deleting a preset station . . . . . . . . . . . . . . . . . . . . 13 Shutting down your system . . . . . . . . . . . . . . . . . 6 Optional radio tuner settings . . . . . . . . . . . . . . . . 13 OPERATING YOUR CONNECTED DEVICES 7 MORE BUTTONS AND SYSTEM OPTIONS 14 Selecting a connected device . . . . . . . . . . . . . . . 7 MORE buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Activating a MORE button function . . . . . . . . . . 14 Watching TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Button function definitions . . . . . . . . . . . . . . . . . 14 Using a set top box . . . . . . . . . . . . . . . . . . . . . 8 Using the tuner in your TV . . . . . . . . . . . . . . . . 8 Changing system options . . . . . . . . . . . . . . . . . . . 15 Tuning to a TV station . . . . . . . . . . . . . . . . . . . . 8 Playing audio/video devices . . . . . . . . . . . . . . . . 9 Listening to a Bose link input device . . . . . . . . . . 9 Playing an iPod or iPhone (V25 and V35 only) . . 10 v

ResoluteVigilanteOG.book Page vi Monday, December 7, 2009 9:48 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English USING THE SETUP MODE 18 About the Setup mode . . . . . . . . . . . . . . . . . . . . . 18 Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ADDING SOUND TO ANOTHER ROOM (V25 AND V35 SYSTEMS)* 19 Expanding your system . . . . . . . . . . . . . . . . . . . . 19 Expansion guidelines . . . . . . . . . . . . . . . . . . . . . . 19 CARE AND MAINTENANCE 20 Replacing the batteries . . . . . . . . . . . . . . . . . . . . 20 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Viewing system information . . . . . . . . . . . . . . . . . 20 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Resetting the system . . . . . . . . . . . . . . . . . . . . 24 Pairing the remote with the console . . . . . . . . . 24 Performing a system software update . . . . . . . 24 Contacting customer service . . . . . . . . . . . . . . . . 24 Limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . 25 Technical information . . . . . . . . . . . . . . . . . . . . . . 25 *Not applicable to systems sold in Japan. vi

04.RV_OG_Intro.fm Page 1 Monday, December 7, 2009 10:09 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 INTRODUCTION Welcome • AM/FM radio (V25 and V35 systems only) • Can deliver sound in up to 14 additional rooms or Thank you for choosing a Bose® LIFESTYLE® system locations (V25 and V35 systems only, not applicable for your home. This elegant and easy-to-use system for systems sold in Japan) delivers superior performance for both music and video. If you need help By now you should have successfully set up your system using the UnifyTM intelligent integration system If you have questions while operating your new and calibrated the sound for your room using the LIFESTYLE® system, go to http://owners.Bose.com ADAPTiQ® audio calibration system. on the Internet for helpful operating information. This guide describes your new remote control and If you experience any operating difficulties, be sure to shows you how to operate your system and its check the troubleshooting table on page 21. You can connected devices. solve the most common operating problems using the helpful tips provided there. System features IMPORTANT! – Please register your • Unify intelligent integration system to help you TM product right away! easily add devices to your system Registering your product enables you to receive notifications of system software updates to keep your • ADAPTiQ audio calibration system that optimizes product performing optimally. It also allows us to send system performance for your room you information about new products and special offers • RF remote control from Bose. • HDMI connectivity Please follow the instructions on your Product • Video up-conversion to 1080p Registration Card to register. Failure to register will • Photo viewing using a USB flash drive not affect your limited warranty rights. • Embedded iPod/iPhone interface and dock (V25 and V35 systems only) 1

ResoluteVigilanteOG.book Page 2 Monday, December 7, 2009 9:48 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English YOUR REMOTE CONTROL This advanced radio frequency remote works 1 SOURCE – Displays and selects connected devices throughout the room. You do not need to aim it at the from the source list on your TV. control console. 2 Power – Turns your LIFESTYLE® system on or off (press and hold to turn off all rooms*) iPod 3:20 3 Volume Up/Down – Increases (+) or decreases (–) The Beatles 14 the system volume 1 4 Mute – Mutes/unmutes system speakers 13 (Press and hold to mute/unmute all rooms*) 2 12 5 Image View – Changes the way video appears 6 Numeric Keypad – Allows manual entry of channels and settings 11 7 TV Input – Changes inputs on your TV 3 10 Playback Controls – See page 3 8 4 9 9 Last Channel – Returns to last channel or preset 5 10 Channel Up/Down – Next/previous channel or preset 8 11 MORE – Displays additional device-specific controls and information on your TV 12 Navigation controls – See page 3 6 13 TV Power – Turns your TV on or off 7 14 Information Display (V25 and V35 system remotes) *For V25 and V35 systems delivering sound to another room through Bose® link OUT (not applicable to systems sold in Japan) 2

ResoluteVigilanteOG.book Page 3 Monday, December 7, 2009 9:48 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 YOUR REMOTE CONTROL Navigation controls Playback controls 1 1 9 2 7 8 2 7 3 6 3 6 4 4 1 5 5 1 Page Up/Down – Moves to next/previous page 1 Shuffle 2 MENU – Displays the menu for a connected device 2 Quick Replay/Skip Backward 3 INFO – Displays program information 3 Seek Backward/Rewind 4 OK – Selects or confirms highlighted item 4 Stop 5 Left/Right and Up/Down – Navigation control 5 Record 6 EXIT – Clears a menu or guide from your TV screen 6 Seek Forward/Fast Forward 7 GUIDE – Displays your set top box or TV program 7 Quick Skip/Skip Forward guide, or Blu-ray Disc™ player popup menu 8 Pause 9 Play Note: See “Operating Your Connected Devices” on page 7 for more details on using navigation and playback controls with selected sources. 3

ResoluteVigilanteOG.book Page 4 Monday, December 7, 2009 9:48 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English YOUR REMOTE CONTROL Information display Remote glow button (V25 and V35 system remotes) Pressing the glow button on the rear of the remote The display provides operating and system status illuminates the remote buttons (and the display for information. V25 and V35 systems). The light turns off automatically after several seconds to prolong battery life. Examples: • Source identification Glow button Cable To adjust the illumination level: • Volume Cable Note: To avoid the risk of deleting a 43 radio preset, switch to any source other than AM or FM before making this adjustment. • Radio tuner 1. Press and hold the Glow and FM P1 OK buttons at the same time 90.9 - WBUR90.9 for 5 seconds. 2. Press the up/down navigation • iPod button to select Brightness or Contrast. iPod Album 3. Press the left/right navigation button to decrease or increase the illumination level. • Operating prompts 4. Press either the OK or Glow Hold number key button to return to normal to set preset operation. 4

ResoluteVigilanteOG.book Page 5 Monday, December 7, 2009 9:48 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 YOUR CONTROL CONSOLE 3 Headphones output Accepts stereo headphones with a 3.5 mm stereo plug. Volume level is set by the volume controls. 4 Control buttons 1 2 3 Turns system power on or off 4 5 6 Source Lists system sources on your TV 1 Power light Mutes/unmutes the system speakers • Red ........................ System is off (Standby) • Blinking green........ System is starting Decreases system volume • Steady green ......... System is on and ready to use in the main room or other rooms Increases system volume • Amber.................... System off and charging iPod (V25 and V35 systems only) Setup Displays the Setup menu (press and release) or system information (press and hold) 2 Front A/V inputs Used for temporarily connecting an audio/video device 5 Front USB input such as a camcorder. Used for viewing photo files from a USB device including a digital camera. Also used for updating Right (R) audio channel (red) system software. Left (L) or mono audio channel (white) Composite video (yellow) 6 Front HDMI input Used for temporarily connecting an HDMI device such as a video camera. 5

ResoluteVigilanteOG.book Page 6 Monday, December 7, 2009 9:48 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English POWER ON/OFF CONTROLS Starting your system Turning on your TV Press the power button on the remote or on the If you programmed your remote during the initial console. setup, press the TV power button on the remote control to turn on your TV. Otherwise, use the To keep energy consumption to a minimum, the system remote that came with your TV. operates in a very low power state when in standby (off) mode. Because of this, the system requires several seconds to start. The power LED on the console Shutting down your system changes to blinking green while the system starts up. When it changes from blinking to solid green, your Press the power button on the remote or on system is on and ready to use. the control console. The system will shut down automatically after a few seconds. However, if Pressing the remote SOURCE button also you decide to access the power controls for starts your system and puts the SOURCE connected devices, automatic shutdown will be menu on your TV screen. stopped and you must complete the shutdown Setup Pressing the Setup button on the console using the on-screen controls. also starts your system and puts the Setup menu on your TV screen. 6

ResoluteVigilanteOG.book Page 7 Monday, December 7, 2009 9:48 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 OPERATING YOUR CONNECTED DEVICES Selecting a connected device 2. Keep pressing SOURCE to move the highlight down the list and select the source you want. The SOURCE menu allows you to select your • You can also use the up ( ) or down ( ) naviga- connected devices. tion buttons to select a source. 1. Press the remote SOURCE button to display a list • If you named a device during the setup process, of connected devices on your TV. The currently the assigned name appears in the list. Unnamed selected device is highlighted as shown in the devices appear as generic inputs such as following example: “Input 1 (HDMI)” and “Input 2 (HDMI).” • If you select a device that is not turned on, a message will appear on the screen reminding you to make sure the device is turned on. Highlighted selection 7

ResoluteVigilanteOG.book Page 8 Monday, December 7, 2009 9:48 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English OPERATING YOUR CONNECTED DEVICES Watching TV 3. Tune to a station. See “Tuning to a TV station.” To return to using other sources, use the TV Input Your TV may be receiving its program content through a button to first select the input for the Bose system, then set top box or the tuner built into your TV. press the SOURCE button and select another source. Note: Since most TVs come with an IR (infrared) remote, Tuning to a TV station ® you may need to point the Bose remote at your TV to You can tune to a TV station using any of the following operate it. methods. Enter the channel number on the keypad Using a set top box and press OK. Use the dash button for If you connected a cable, satellite, or other set top box channel numbers using a dash or period. to your TV, it will appear in the SOURCE menu under the name you assigned it during the setup process. 1. Press the remote SOURCE button and select the Press Channel Up ( ) or device that provides your TV programs. Down ( ) to change channels. 2. Tune to a station. See “Tuning to a TV station.” Press to tune to last selected channel. Using the tuner in your TV Press GUIDE. Use the navigation, page up/down, and OK buttons to select a If you are using the tuner in your TV to receive TV station from the program guide. programs: 1. Press the remote SOURCE button and select TV. 2. Press the TV Input button to select the internal tuner in your TV. 8

ResoluteVigilanteOG.book Page 9 Monday, December 7, 2009 9:48 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 OPERATING YOUR CONNECTED DEVICES Playing audio/video devices Play Pause During the interactive setup process you may have connected an audio/visual device such as a CD, DVD, Stop DVR, or Blu-ray Disc™ player. These would typically be Record connected to inputs 1-5. Fast forward or search forward ® If you programmed the Bose remote for the device, Fast rewind or search reverse you can use the following controls to operate the selected device. Quick skip or skip forward Display device menu (if available) or Quick replay or skip backward MENU system setup menu Shuffle mode GUIDE Display Blu-ray pop-up menu INFO Display device information EXIT Exit menu Listening to a Bose link input Up one item device Down one item ® You can use your LIFESTYLE system to listen to Move left content from a Bose link-compatible system, such as ® Move right another LIFESTYLE system. Connect that system to the Bose link IN connector on the rear panel of the Select control console. Next page, channel, or disc To listen to the Bose link source, press the SOURCE Previous page, channel, or disc button and select Bose link. Be sure to connect your Bose link device before attempting to select it. It will not appear in the SOURCE list until it is connected. 9

ResoluteVigilanteOG.book Page 10 Monday, December 7, 2009 9:48 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English OPERATING YOUR CONNECTED DEVICES Playing an iPod or iPhone The following controls are available to operate your connected iPod. (V25 and V35 only) Up one menu level (press and hold to ® MENU go to top menu level) (If playing Your LIFESTYLE system can play audio and video video, pause and return to menu) from your iPod or iPhone. Up one page Be sure to dock your iPod before attempting to select it. It will not appear in the SOURCE list Down one page until you dock it. Up one menu item (press and hold to scroll quickly) Your iPod menus and content appear on the left side Down one menu item of your screen as shown in the following example. (press and hold to scroll quickly) The “Now Playing” track appears on the right. Up one menu level (If playing video, pause and return to menu) Down one menu level Down one menu level Play Pause Stop Next track or audio bookmark Previous track or audio bookmark Fast forward Fast rewind Shuffle on/off 10

ResoluteVigilanteOG.book Page 11 Monday, December 7, 2009 9:48 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 OPERATING YOUR CONNECTED DEVICES Using the front console inputs Use the following controls for viewing digital photos. Up one menu item (press and hold to The front of the console provides analog A/V inputs repeat) plus a USB and an HDMI input. These inputs appear in Down one menu item (press and hold the SOURCE menu as A/V (Front), USB, and HDMI to repeat) (Front) only when a device is connected. These inputs Up one folder level, or exit and return are provided for temporarily connecting devices such to browsing folders (if viewing a as digital cameras and video cameras. slideshow) Up one folder level, or exit and return Front USB input MENU to browsing folders (if viewing a ® slideshow) Your LIFESTYLE system can display photo files (.jpg or .jpeg format only) from a USB storage device. Down one folder level When selecting the USB source, folders appear at the Down one folder level (if a folder is highlighted), or top of the list on the left followed by single image files. Play slideshow (if a photo file is Selecting a folder displays its contents. highlighted) Up nine items Down nine items EXIT Exit slideshow and return to browsing folders Play slideshow of highlighted folder Pause slideshow Exit slideshow and return to browsing folders Next image Previous image 11

ResoluteVigilanteOG.book Page 12 Monday, December 7, 2009 9:48 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English OPERATING YOUR CONNECTED DEVICES Front Analog A/V input Stretch 1 Stretches video image evenly You can use this input for devices that have composite from the center. ® video and left/right audio outputs. The Bose remote does not control a device connected to this input. You need to use the controls on the device itself or Stretch 2 Stretches the edges of the the remote that came with it. video image much more than the center portion of the image. Front HDMI input Zoom Enlarges the video image (press You can use this input for devices that have an HDMI the up/down navigation buttons output. The Bose remote does not control a device to vertically offset the image on connected to this input. You need to use the controls your screen). on the device itself or the remote that came with it. Gray Bars Places vertical gray bars on the left and right of a standard Changing the image view definition video image. Press the image view button to display a menu Fit Fits the video image to your of video formatting choices. Continue to press screen. this button to highlight your choice. Your TV picture will change momentarily after you select a format. Normal Leaves original video image unchanged. Auto-Wide Fills width of the screen without cropping any content. 12

ResoluteVigilanteOG.book Page 13 Monday, December 7, 2009 9:48 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 LISTENING TO THE RADIO (V25 AND V35 SYSTEMS) Selecting the radio Recalling a preset station 1. Press the SOURCE button. To recall your stored presets: 2. Keep pressing the SOURCE button to select FM or • Press the channel up or down AM in the SOURCE list. button to go to the next or previous preset. Tuning to a station • For quick access to presets 1-9, press the number key of the preset. • Press (increase) or (decrease) to tune up or down the frequency band. OR • Press (seek next) or (seek previous) to find the next/previous Deleting a preset station strong station. 1. Recall the preset station you want to delete. Storing a preset station 2. Press and hold the OK button until the preset number disappears from the display. The built-in radio tuner can store up to 25 FM and 25 AM preset stations. Optional radio tuner settings 1. Tune to a radio station. 2. For presets 1-9, press and hold the number key. 1. Press the MORE button and select OPTIONS. For 10-25, press and hold the OK button to store 2. Select an option to change from the menu (see the station in the next available preset. “OPTIONS menu” on page 16 for details): FM P1 Preset number • Current Station: Allow Stereo, Stereo Off 90.9 - WBUR90.9 • RDS: On, Off 13

ResoluteVigilanteOG.book Page 14 Monday, December 7, 2009 9:48 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English MORE BUTTONS AND SYSTEM OPTIONS MORE buttons Button function definitions Turns device power on/off. Press the MORE button to display additional button functions along the top of your TV screen for the current source. The functions that appear Displays a list of favorite channels. depend on the selected source. The following example shows how these buttons appear on your TV. Performs A, B, C, or D functions in an interactive program guide. Enables or disables Teletext functions. Activating a MORE button function 1. Press the remote MORE button. Performs Red, Green, Yellow, or Blue functions on Blu-ray Disc™ players, set top 2. Using the left ( ) and right ( ) navigation buttons, boxes and Teletext. highlight the button function you want to activate. 3. Press the remote OK button. Displays program guide for previous or next day. Displays playlist of recorded programs. Activates picture-in-picture mode. Accesses video on demand. Switches your TV to live programming. Switches between DVD and VCR in a combo player. 14

ResoluteVigilanteOG.book Page 15 Monday, December 7, 2009 9:48 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 MORE BUTTONS AND SYSTEM OPTIONS Moves to the “Home” state of the device. 3. Press the remote OK button to display the OPTIONS menu for the current source. Repeat track on an iPod or other digital The following is an example for a video device. media players. Switches tuners in a multi-tuner device. Accesses the system menu for your set top box. Accesses interactive features for some digital television services (EU only). Highlighted option See the following on “Changing system options.” Selected setting Changing system options The number of items appearing in the OPTIONS menu depends on which source is currently selected. 4. Using the up/down ( ) navigation buttons, 1. Press the remote MORE button. highlight the option you want to change. 2. Using the left/right ( ) navigation buttons, 5. Using the left/right ( ) navigation buttons, highlight OPTIONS. select the setting. 6. Press the remote EXIT button when done. 15

ResoluteVigilanteOG.book Page 16 Monday, December 7, 2009 9:48 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English MORE BUTTONS AND SYSTEM OPTIONS OPTIONS menu Option Available Settings Sound Original ................... Plays stereo audio when stereo audio is received from the source Recommended* ...... Plays 5-channel audio whether or not 2- or 5-channel audio is received from the source Alternative .............. Plays 5-channel audio when either stereo or 5-channel audio is received from the source Enhanced Mono ..... Plays simulated surround sound when monaural audio is received from the source Current Station Allow Stereo* .......... Allows stereo sound from the current stereo FM radio station (V35/V25 only) Stereo Off ............... Changes the current station to mono, which can help when tuning to a weak radio station RDS On* ......................... Displays RDS information on the remote (V35/V25 only) Off ........................... No RDS information on the remote Game Mode On ........................... Produces improved video performance for game systems Off* .......................... Normal video performance Audio Off* .......................... No change to audio track Compression Enhance Dialog ....... Enhances sound output so you can hear movie dialogs more distinctly Smart Volume.......... Reduces the range of volume levels in a movie soundtrack so the difference between extremely loud outbursts and soft sounds is less noticeable Audio Track Track 1* ................... Selects track 1 from an external audio stream with multiple audio tracks Track 2..................... Selects track 2 from an external audio stream with multiple audio tracks Both Tracks ............. Selects tracks 1 and 2 from an external audio stream Not Available ........... Automatically selected when only one track is received Volume Offset Increases the volume level of the selected source relative to other sources (0* to 10) Source On ........................... Applies video overscan to the current video source Overscan Off* .......................... Video source unaffected System Bass Adjusts bass level ® –9 to Normal* to +6 (After ADAPTiQ calibration) –14 to Normal* to 14 (No ADAPTiQ calibration) 16

ResoluteVigilanteOG.book Page 17 Monday, December 7, 2009 9:48 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 MORE BUTTONS AND SYSTEM OPTIONS Option Available Settings System Treble Adjusts treble level ® –9 to Normal* to +6 (after ADAPTiQ calibration) –14 to Normal* to +14 (no ADAPTiQ calibration) A/V Sync Adjusts the audio delay to synchronize audio with the video –2 to Normal* to +5 Rear Speakers Adjusts the volume level of the rear speakers relative to front speakers (–10 to Normal* to +6) This option is unavailable if the Speakers option is set to Stereo (2) or Front (3) Center Speaker Adjusts the volume level of the front center speaker relative to other speakers (–8 to Normal* to +8) (unavailable if the Speakers option is set to Stereo (2)) Speakers Stereo (2) ......... Activates only front left and right speakers Front (3) ........... Activates only front left, center, and right speakers Surround (5)* ... Activates all front and rear speakers Volume on TV On* .................. Enables the system to display the volume level meter and mute indicator on your TV Off ................... Prevents the display of the volume level meter and mute indicator TV Speakers On ...................Sends HDMI audio to your TV (audio from the TV is not affected by plugging headphones into the control console or by pressing Mute or Volume on the remote) ® Off* ...................Sends HDMI audio to the LIFESTYLE system speakers Video Output Changes the resolution (Standard/720p/1080i/1080p) of the video signal sent to your TV (only settings supported by your TV appear as options) * Factory setting 17

ResoluteVigilanteOG.book Page 18 Monday, December 7, 2009 9:48 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English USING THE SETUP MODE About the Setup mode Menu item What you can do After performing the initial system setup using the Source setup • Change a device name Unify™ intelligent integration system, you can make options • Program your remote to control a device additional changes to your system at any time using (Note 2) and add the IR emitter if needed the Setup mode. • Remove a device • Add or change audio or video connections Setup menu Add a device Add another device or accessory to your (Note 2) system To display the Setup menu on your TV, press the Setup Homewide • Select the house code mode: Standard button on the front of the control console. Using the (Note 3) (16 house codes, 16 room codes) or navigation buttons on the remote, select the function Alternative (64 house codes, 4 room codes) you want and follow the instructions on the screen. • Change the room code • For more information on Homewide expan- Menu item What you can do sion, see “Adding Sound to Another Room (V25 and V35 systems)*” on page 19 Resume initial Return to the interactive setup process at the setup (Note 1) last completed event Update Perform a system software update (see “Performing a system software update” on Restart initial Start the interactive setup process from the page 24” for more information) setup (Note 1) beginning Teach mode Send IR codes to program a learning remote Language Change the language of the on-screen (Note 2) display Exit Returns you to the last source selected ® ADAPTiQ Start the ADAPTiQ audio calibration process NOTES: 1. Appears only if initial setup is incomplete. TV options • Program your remote to control your TV 2. Appears only if initial setup is complete. (Note 2) • Replace your TV ® 3. Appears only in LIFESTYLE V25 and V35 systems if initial setup • Add, change, or remove the TV audio is complete. connection 18

ResoluteVigilanteOG.book Page 19 Monday, December 7, 2009 9:48 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 ADDING SOUND TO ANOTHER ROOM (V25 AND V35 SYSTEMS)* Expanding your system that room must be set to the same house code that is stored in the control console. ® Your LIFESTYLE system can deliver Bose quality ® Your system is set to house code 15 at the factory. sound in up to 14 additional rooms in your home. To see the house code, select Homewide in the Connecting a Bose link-compatible product to the Setup menu and then select house code. On the Bose link OUT connector on the control console screen, you will see the house code and a enables you to listen to a different sound source in representation of how the second room remote other rooms. For example, a DVD movie can be playing control switches should be set to match the house in the main room while you listen to the AM/FM radio in code in the control console. the other room. Your system has two house code modes. The For more information or to purchase additional Standard mode provides 16 house codes and products, contact your local Bose dealer. See the 16 room codes. If you live in a multi-unit dwelling, contact list included with your system. you can select the Alternative mode that provides 64 house codes and 4 room codes. Expansion guidelines Note: Switching between Standard and Alternative To set up a Bose link-compatible system in another room, follow the instructions included with the house code modes resets the house code to zero (0). expansion product and be aware of the following: • Using HDMI connections – To hear audio in • Bose link connections – Your system cannot another room from any device connected to HDMI operate with Bose link-enabled products connected input 1, 2, or 3, you must also make an analog audio to both the Bose link IN and Bose link OUT connection between the device and the left (L) and connectors at the same time. right (R) analog connections for that input. Likewise, • Room codes – The speaker system and the remote you must also make analog audio connections if a in your other room must be set to the same room digital audio connection is made for input 4 or 5. code. See the owner’s guide that came with the Bose • Radio operation – Using an expansion room link product for information on setting room codes. remote, you can select and control the radio that • House code – The house code is what enables the is built into the control console in the main room. remote control in another room to communicate with However, if both rooms want to listen to the radio the control console. If you set up a Bose link-enabled at the same time, they can only listen to the same speaker system in another room, the remote used in station. *Not applicable to systems sold in Japan. 19

ResoluteVigilanteOG.book Page 20 Monday, December 7, 2009 9:48 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English CARE AND MAINTENANCE Replacing the batteries Cleaning Replace all four batteries when you notice a marked You can wipe the outside surfaces using a soft dry decrease in the range or response of your remote cloth. You can also lightly vacuum the speaker grilles. control, or when you see the low battery indicator (V25 and V35 systems) on the display. • DO NOT use solvents, chemicals, or sprays. • DO NOT allow liquids to spill or objects to drop into any openings. Low battery icon (V25 and V35 systems) Cable iPod iP Pod 3:20 3:2 0 Viewing system information The Beatles B Press and hold the Setup button on the control console to display the following system information on your TV: 1. Slide the battery compartment cover off the back of the remote control. • Control console serial number, software version, and IR database AA (IEC-LR6) batteries (4) • Acoustimass® module serial number and software version • Radio software version • TV connection status • Remote control ID number and software version Battery compartment cover • House code • Connected Bose® link rooms 2. Remove the old batteries. • Device connections 3. Install four new AA (IEC-LR6) 1.5V batteries, Press the Setup button again to remove the list from matching the polarity markings (+ and –) to the the screen. markings inside the battery compartment. 4. Slide the battery cover back into place. 20

ResoluteVigilanteOG.book Page 21 Monday, December 7, 2009 9:48 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 CARE AND MAINTENANCE Troubleshooting Problem What to do The system is not responding • Make sure the control console is turned on. to initial operation of my • Make sure batteries are in the remote. Bose® remote • Reset the system. See “Resetting the system” on page 24. • Press any remote key and watch the power light on the control console. It should blink with each press. If not, see “Pairing the remote with the console” on page 24 and follow the procedure. The Bose remote does not • Try setting up the device again. Press the Setup button on the control console. Select the device options control a device I added and follow the on-screen instructions to set up the device again. during the initial setup • Your system may need a software update. See “Performing a system software update” on page 24. One video connection is less • To change a video connection, press the Setup button on the control console and select the device setup than optimum options. Follow the on-screen instructions. System doesn’t do • Make sure the AC power cord is inserted securely into the power supply. anything • Make sure the Acoustimass® module and the power supply are fully plugged into a live AC (mains) outlet. • Select a connected device from the SOURCE menu. • Reset the system. See “Resetting the system” on page 24. No sound • Make sure the Acoustimass module is plugged into a live AC (mains) outlet. • Increase the volume. • Press the Mute button ( ) and make sure your system is not muted. • Check the input connections on the control console. Make sure that you have selected the right source. • Make sure that the audio input cable is firmly plugged into the Acoustimass connector on the control console and the other end is firmly seated into the Media Center connector on the Acoustimass module. • Check connections between the front and rear speakers and the Acoustimass module. • For radio operation (V25 and V35 systems only), connect the FM and AM antennas. • Reset the system. See “Resetting the system” on page 24. 21

ResoluteVigilanteOG.book Page 22 Monday, December 7, 2009 9:48 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English CARE AND MAINTENANCE Problem What to do Sound is marred by a loud • Contact Bose® Customer Service to determine if and how other electrical devices in the room may be hum or buzz, which may creating unwanted signals, and to obtain possible remedies. be electrical in nature (not harmonic) No sound from center • Make sure the center speaker cable is connected at both ends. speaker • Set the Speakers option to Front(3) or Surround(5) in the OPTIONS menu. • In the OPTIONS menu, make sure the Sound setting is not Original. Center speaker is too loud • Decrease the Center Speaker volume setting in the OPTIONS menu for the current source. No sound from rear speakers • Make sure the Speakers option is set to Surround(5) in the OPTIONS menu. • Increase the Rear Speakers setting in the OPTIONS menu for the current source. • Make sure the video sound source is stereo-encoded or surround-encoded, and the device used (DVD, VCR, DVR, etc.) is stereo. • For stereo inputs, make sure the Sound option is set to Recommended or Alternative. Rear speakers are too loud • Decrease the Rear Speakers volume setting in the OPTIONS menu for the current source. • Make sure the left and right front speakers are connected to the front speaker jacks, and the left and right rear speakers are connected to the rear speaker jacks. Radio does not work • Make sure antennas are connected properly. (V25 and V35 systems only) • Move AM antenna at least 20 inches (50 cm) from the control console and Acoustimass® module. • Adjust antenna position to improve reception. • Make sure the AM antenna is in an upright position. • Move antennas farther from control console, TV, or other electronic equipment. • Select another station. You may be in an area of weak signal coverage for some stations. FM sound is distorted • Adjust antenna position to reduce interference. (V25 and V35 systems only) • Fully extend the FM antenna. 22

ResoluteVigilanteOG.book Page 23 Monday, December 7, 2009 9:48 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 CARE AND MAINTENANCE Problem What to do FM sound is noisy when • Weak FM stations will produce static in the rear speakers. Set Speakers option to Stereo(2) in the Speakers option is set to OPTIONS menu to minimize noise. Front(3) or Surround(5) (V25 and V35 systems only) Sound is distorted • Make sure speaker cables are not damaged and the connections are secure. • Reduce the volume output level from any external devices connected to the control console. No sound from a connected • Check the connections. device • If using a coaxial or optical audio connection, make sure you have not made both types of connections to the same input on the control console. • Make sure that device is turned on. • Refer to the owner’s manual that came with the device. No TV picture, but audio is • Check the TV video input selection. Make sure it is correct for the video source. heard • Make sure video cables are securely connected. A connected device does not • Try connecting the included external IR emitter to the control console. For guidance, press the Setup respond consistently to button on the control console. Select the device options and follow the on-screen instructions. remote commands Intermittent audio dropouts • Contact Bose® Customer Service to request a composite video cable that can be used for the coaxial heard on coaxial digital audio digital audio connection. inputs 23

ResoluteVigilanteOG.book Page 24 Monday, December 7, 2009 9:48 AM TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English CARE AND MAINTENANCE Resetting the system Performing a system software update 1. Press and hold the power button on the control System software updates are available periodically and console for 5 seconds or until the power light on can be downloaded over the Internet to the USB drive the control console changes to red. included with your system. The power light on the control console changes to 1. Press the Setup button on the front of the control red when the system shuts down. console to display the Setup menu. 2. Press and release the power button on the control 2. Using the remote navigation buttons, select console to restart the system. The power light Update. changes to blinking green and then solid green 3. Follow the instructions on the screen. when the system is on and ready to use. 3. If you still cannot operate the system using the Note: To make sure your Bose® remote is updated, hold remote, try the next procedure to pair the remote the remote near the front of the control console while it is with the control console. being updated. Pairing the remote with the console 1. Make sure your system is on. If not, press the Contacting customer service power button on the control console. For additional help in solving problems, contact Bose® 2. Hold the remote close to the control console. Customer Service. See the address sheet included in 3. Press and hold both the Mute button ( ) on the the carton. control console and the OK button on the remote at the same time for five seconds. The power light blinks when pairing is complete. 4. Press any remote button and verify that the power light on the control console blinks with each button press. 24

ResoluteVigilanteOG.book Page 25 Monday, December 7, 2009 9:48 AM English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 CARE AND MAINTENANCE Limited Warranty Licensing information This product contains one or more free or open source software programs originating from third parties and distributed as part of Your LIFESTYLE system is covered by a limited warranty. Details ® the STLinux software package. Visit www.stlinux.com/download of the limited warranty are provided on the product registration for further details. This free and open source software is subject card that is included in the carton. Please refer to the card for to the terms of the GNU General Public License, GNU Library/ instructions on how to register. Failure to register will not affect Lesser General Public License, or other different and/or your limited warranty rights. additional copyright licenses, notices and disclaimers. To What you must do to obtain Limited Warranty Service: understand your rights under these licenses, please refer to the Return product, with proof of purchase from an authorized Bose specific terms of the licenses, notices, and disclaimers, which dealer, using the following procedures: are provided to you in an electronic file, named “licenses.pdf,” located within the product’s control console. To read this file, 1. Contact the Bose organization in your country/region you will need a computer with a USB port and a software (visit Global.Bose.com/register for Bose contact program that can view .pdf files. To download “licenses.pdf” information in your country/region) for specific return from your product’s control console: and shipping instructions; 1. Press and hold the Setup button on the front of the control 2. Label and ship the product, freight prepaid, to the address console to display the System Information screen. provided by the Bose organization in your country; and 2. Insert a USB drive (there should be one included in your 3. Place any necessary return authorization number prominently system package) into the USB input on the front of the on the outside of the carton. Cartons not bearing a return control console. authorization number, where required, will be refused. 3. Press the OK button on the remote control to copy the file to the USB drive. This download process should be completed Technical information within 30 seconds. You may then remove the USB drive. 4. To read the file “licenses.pdf,” plug the USB drive into a computer with a USB port, navigate to the USB root directory, Remote control and open “licenses.pdf” with a software program that can Frequency: 2.4 GHz view .pdf files. Range: 33 ft (10 m) To receive a copy of the source code for the open source Control console power supply rating software programs included in this product, please mail your AC input: 100-240V 50/60 Hz, 0.5A (0,5A) written request to: Licensing Manager, Mailstop 6A2, Bose DC output: 12V 20W Max. Corporation, The Mountain, Framingham, MA 01701-9168. Bose Corporation will distribute such source code to you on a disc for Acoustimass® module rating a charge covering the cost of performing such distribution, such USA/Canada: 100-120V 50/60 Hz 350W as the cost of media, shipping and handling. All of the above International: 220-240V 50/60 Hz 350W referenced licenses, notices and disclaimers are reproduced and Dual voltage: 100-120/220-240V 50/60 Hz 350W available with such source code. This offer is valid for a period of three (3) years following the date of distribution of this product by Bose Corporation. 25

LIFESTYLE V35/V25 HOME ENTERTAINMENT SYSTEMS ® LIFESTYLE T20/ T10 HOME THEATER SYSTEMS ® ©2010 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM324446 Rev.00 Operating Guide | Guía del usuario | Guide d’utilisation


Document Created: 2009-12-16 09:59:14
Document Modified: 2009-12-16 09:59:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC