Modular Attestation Letter

FCC ID: A8TBM57SPPSYC2A

Cover Letter(s)

Download: PDF
FCCID_1662264

30078¥3 iA 4F; No.8, Dusing Rd., Hsinchu Science Park, Hsinchu City 3 . — .0.C. TEL : 886—3—577—8385 FAX : 886—3—577—8501 alfrIRiIEiGGIRAqS wawissctech.com ISSC Technologies Corp. Federal Communications Commission Authorization and Evaluation Division Request for Transmitter Single Modular Approval for FCC ID:A8STBMS7SPPSYC2A Pursuant to Sections 15.212 ofthe Commission‘s Rules, we hereby request Single Modular Approval. The module fulfils the rules as follows: Item Requirements Implementation: 1|¥es |The module must be shielded Have its own RF shielding Please refer to Photos 2\Yes Have buffered modulation/data inputs [Have buffered modulation/data inputs, (if such inputs are provided), Please refer to block diagram and schematic 3|Yes Have it own power supply regulation [Have it own power supply regulation Please refer to block diagram and schematic 4|Yes Meet the antenna requirements of Meet the antenna requirements of Section 15.203 Section 15.203 (describe antenna information here} 5|Yes Be tested in a stand—alone Please refer to test setup photos configuration, i.e., the antenna, AC or DC power and data input/output lines must be connected to the module but, the module must not be inside another case during testing 6)|Yes Be labeled with its own FCC ID Be labeled with its own FCC ID number number, and if the FCC ID is not visible|Please refer to Label information when the module is installed inside lanother device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module.

4F, No.8, Dusing Rd., Hsinchu Science Park; Hsinchu City 30078, Talwan, R.O.C TEL : 886—3—577—0385 FAX« 886—3—6577—sn RRFEiItIpPERAS wawssc—tech.com ISSCTechnologies Corp. Yes [The modular transmitter must comply with any specific rules or operating Please refer to User manual, requirements that ordinarily apply to a [There are no adjustable components in complete transmitter and the the RF section manufacturer must provide adequate instructions along with the module to lexplain any such requirements. IA copy of these instructions must be included in the application for lequipment authorization. Yes Address compliance with the Please refer to test report. Commission‘s RF exposure limits in Sections 1.1310 and 2.1093. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF exposure compliance in accordance with Section 15.247(b)(4). Signed By: Olmflzmg é M Date 2012/03/13


Document Created: 2012-03-13 17:27:07
Document Modified: 2012-03-13 17:27:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC