Label Sample & Label Location

FCC ID: A8J-EWS377AP

ID Label/Location Info

Download: PDF
FCCID_4228839

2-6R 61.4 This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions : (1) This dev ice may not c aus e harmful interference , and (2) this 51.4 device must accept any interference received, including interference that may cause undesired operation. ※Red color for reference and will be printed by factory. 11AX Indoor Managed AP Model Name: EWS377AP This device complies with Part 15 of FCC ID: A8J-EWS377AP the FCC Rules.Operation is subject to IC: 10103A-EWS377AP the following two conditions : (1) This device may not c aus e harmful interference , and (2) this device must accept any interference MAC:XXXXXXXXXXXX received, including interference that may cause undesired operation. Check Code:XXXXXXXX S/N:XXXXXXXXX ⫸⪶'LPHQVLRQ PP ‪Ⲭ徦⃄᳋䧤⋆Ⲥ⃕㣗㵔 ∮⃵,QN⑬儰涏 ⽫ⵘⰉ㺂莅㽯㼄⟃笪晝EBUB捀彋 ‪Ⲭ7ROHUDQFH°PP 尝剤䭸爚⡙縨涸鿈ⴕⰗ䊴捀pNN 㘎宨0DWHULDO䐨⊋愾湋Ჾ僪涍偞ㄑ⨕日做 尝剤䭸爚涸鿈ⴕ⫙俷Ⱇ䊴捀p䏞 ⵓ䯗♉唝&RGH+7/60, ∮⃵⡀㗇᳋㳃Ʊ㑵⨕ピ㶰❦䊼嬟 侊偞$GKHVLYHˋ溶吾⊂3HHO$GKHVLRQNJIPPʾ ∮⃵ḋ丬僅◔㪒ṉ∮⃵᳋䧤⋆ ˋ≄曉⊂5HOHDVH)RUFH›JIPP 烋⶞␄曆㿟㝛ᶴ悋㑮垻Ḛ ᳈ &RDWLQJ䐨日映㿟洳ㄑ∮3(7 ˋ溶吾⊂3HHO$GKHVLRQʾNJIPP ˋ≄曉⊂5HOHDVH)RUFHaJIPP ˋῄ㋨⊂+ROGLQJ3RZHUʾKRXUPPNJI ˋ恐䔏㺒⺍6HUYLFH7HPSHUDWXUH濎 6710A6873000 2018/11/06 䔉⒨奶≪

2-6R 61.4 This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions : (1) This device may not caus e harmful interference , and (2) this 51.4 device must accept any interference received, including interference that may cause undesired operation. ※Red color for reference and will be printed by factory. 11AX Indoor Managed AP Model Name: EWS377AP This device complies with Part 15 of FCC ID: A8J-EWS377AP the FCC Rules.Operation is subject to IC: 10103A-EWS377AP the following two conditions : (1) This device may not caus e harmful interference , and (2) this device must accept any interference MAC:XXXXXXXXXXXX received, including interference that may cause undesired operation. Check Code:XXXXXXXX S/N:XXXXXXXXX - 尺寸 Dimension : 61.4 *51.4 mm - 公差部分不符合左列標準 - 印刷 Ink : 單色黑 - 印刷內容與尺寸以網版data為準 - 公差 Tolerance : ±0.1 mm - 沒有指示位置的部分公差為±0.2mm - 材質 Material : 50 番反銀龍+一般黏膠 +打字霧膜 - 沒有指示的部分傾斜公差為±0.2度 底紙型號 Code : HTLSMI50 - 印刷如有不清、斷字或滲墨現象 背 膠 Adhesive : △ 黏著力 Peel Adhesion: 0.8 kgf/25mm ↑ - 印刷位置與圖比例印刷不符合 △ 剝離力 Release Force: 7±3 gf/25mm ※廠商須無條件重新製作! 上 光 Coating : 25番霧面無鹵打印 PET △ 黏著力 Peel Adhesion: 0.6 ↑ kgf / 25mm △ 剝離力Release Force : 5~15 gf / 25mm △ 保持力Holding Power : 12 ↑ hour/ 25mm2 / kgf △ 適用溫度Service Temperature: ≧ 110 ℃ 6710A6873000 2018/11/06 產品規劃

Label location


Document Created: 2019-03-29 13:13:25
Document Modified: 2019-03-29 13:13:25
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC