Attestation (Professional Installation Declaration)

FCC ID: A8J-ECM955AP

Cover Letter(s)

Download: PDF
FCCID_4091186

EnGenius Technologies 1580 Scenic Avenue, Costa Mesa, CA92626 PROFESSIONAL INSTALLATION ATTESTATION Date: 2018—07—23 FCC ID: A8J—ECM955AP We, EnGenius Technologies hereby declare that requirements of KDB 353028 D01 Antennas Part 15 Transmitters vO1 have been met and shown on the following questions. Further we declare that the info listed below are correct and represent the product in consideration under this filing. 1. Professional installation must be justified. Description: Device is outdoor Access Point and must need special trained professional in configuring and installing the product, more details please refer to user manual exhibit. 2. Professional installation does not permit use of any antenna with the transmitter; the permitted types of antenna specified as below. Description: Below listed of Antennas has been compliance FCC Rule Part 15 requirement, more details please refer to test reports. Radio Frequency Antenna Type Antenna Connector Gain (dBi) 1 2 4GHz Omni N type 5 2 5GHz Omni N type 7 3 24GHz Dipole RSMA 4.5 (RX only) 5GHz Dipole RSMA 6 3. The applicant should address the following items when justifying professional installation. (1) To qualify for professional installation, please explain why the hardware is not readily available to average consumer. Description: Due to this product and will not be sold directly to the general public through retail store, therefore the hardware is not readily available to average consumer. (2) Marketing — Applicant must ensure device cannot be sold via retail to the general public or by mail order. Description: This product and will not be sold directly to the general public through retail store. It will be sold to authorized dealers or installers only.

EnGenius Technologies 1580 Scenic Avenue, Costa Mesa, CA92626 (3) Applicant must show that device intended use is not for consumers and general public. Description: Device is for industrial/commercial use. (4) Explain what is unique, sophisticated, complex, or specialized about the equipment that REQUIRESit to be installed by a professional installer? Description: Device is outdoor Access Point and must need special trained professional in configuring and installing the product. Professional installation does not permit use of any antenna with the transmitter, the permitted types of antenna is specified. More details please refer to user manual exhibit. 4. Other professional installation requirements (1) Installation must be controlled. Description: The product will be distributed through controlled distribution channel which hasspecial trained professional to install this product (2) Installed by licensed professionals. Description: Device sold to dealer who hires installers and need special trained professional in configuring and installing the product. (3) Installation requires special training. Description: The product need special programming, access to keypad, field strength measurements made, so must need special trained professional in configuring and installing the product. If you should have any question(s) regarding this declaration, please don‘t hesitate to contact us. Thank you! Meng Chee Leo / General Manager Telephone Number: 888.735.783.7888 ext. 888 Fax Number: 714.432.8667 E—mail Address: me.leo@engeniustech.com


Document Created: 2018-11-26 18:46:15
Document Modified: 2018-11-26 18:46:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC