15U20918-E10 FCC IC RF EXPOSURE REPORT Final 7-29-15.pdf

FCC ID: A4RRUX-J42

RF Exposure Info

Download: PDF
FCCID_2756694

FCC 47 CFR § 2.1093 INDUSTRY CANADA RSS 102 ISSUE 5 RF EXPOSURE REPORT FOR MEDIA STREAMING DEVICE with BLE, 2.4GHz and 5GHz WLAN Radios MODEL NUMBER: RUX-J42 FCC ID: A4RRUX-J42 IC ID: 10395A-RUXJ42 REPORT NUMBER: 15U20918-E10 ISSUE DATE: JULY 29, 2015 Prepared for GOOGLE 1600 AMPHITEATRE PARKWAY MOUNTAIN VIEW, CA 94043, U.S.A. Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888

REPORT NO: 15U20918-E10 DATE: JULY 29, 2015 FCC ID: A4RRUX-J42 IC: 10395A-RUXJ42 Revision History Issue Rev. Date Revisions Revised By -- 7/29/15 Initial Issue F. de Anda Page 2 of 13 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U20918-E10 DATE: JULY 29, 2015 FCC ID: A4RRUX-J42 IC: 10395A-RUXJ42 TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. REFERENCES ................................................................................................................... 5 4. FACILITIES AND ACCREDITATION ................................................................................. 5 5. MAXIMUM PERMISSIBLE RF EXPOSURE ....................................................................... 6 5.1. FCC RULES ................................................................................................................ 6 5.2. IC RULES .................................................................................................................... 7 5.3. EQUATIONS................................................................................................................ 8 5.4. LIMITS AND IC EXEMPTION .....................................................................................10 6. RF EXPOSURE RESULTS ................................................................................................11 Page 3 of 13 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U20918-E10 DATE: JULY 29, 2015 FCC ID: A4RRUX-J42 IC: 10395A-RUXJ42 1. ATTESTATION OF TEST RESULTS COMPANY NAME: GOOGLE 1600 AMPHITEATRE PARKWAY MOUNTAIN VIEW, CA 94043, U.S.A. MODEL: RUX-J42 SERIAL NUMBER: NA DATE TESTED: NA APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47 CFR § 2.1093 Exempt from SAR testing Published RF exposure KDB procedures INDUSTRY CANADA RSS 102 ISSUE 5 Exempt from SAR testing UL Verification Services Inc. calculated the RF Exposure of the above equipment in accordance with the requirements set forth in the above standards, using test results reported in the test report documents referenced below and/or documentation furnished by the applicant. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc. based on interpretations of these calculations. The results show that the equipment is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL Verification Services Inc. By: Tested By: FRANCISCO DE ANDA CLIFFORD SUSA PROJECT LEAD EMC ENGINEER UL Verification Services Inc. UL Verification Services Inc. Page 4 of 13 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U20918-E10 DATE: JULY 29, 2015 FCC ID: A4RRUX-J42 IC: 10395A-RUXJ42 2. TEST METHODOLOGY All calculations were made in accordance with FCC OET Bulletin 65 Edition 97-01 and IC Safety Code 6. 3. REFERENCES All measurements were made as documented in test report UL Verification Services Inc. Document 15U20918-E4 FCC_IC BLE Report and 15U20918-E1 FCC_IC DTS WLAN Report for operation in the 2.4 GHz band and UL Verification Services Inc. Document 15U20918-E2 FCC UNII WLAN Report for operation in the 5 GHz bands. Duty cycle data is excerpted from the applicable test reports. Output power and Antenna gain data is excerpted from product documentation provided by the applicant. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47173 Benicia Street, Fremont, California, USA. UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. The full scope of accreditation can be viewed at http://ts.nist.gov/standards/scopes/2000650.htm. Page 5 of 13 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U20918-E10 DATE: JULY 29, 2015 FCC ID: A4RRUX-J42 IC: 10395A-RUXJ42 5. MAXIMUM PERMISSIBLE RF EXPOSURE 5.1. FCC RULES §1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of §2.1093 of this chapter. Page 6 of 13 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U20918-E10 DATE: JULY 29, 2015 FCC ID: A4RRUX-J42 IC: 10395A-RUXJ42 5.2. IC RULES IC Safety Code 6, Section 2.2.1 (a) A person other than an RF and microwave exposed worker shall not be exposed to electromagnetic radiation in a frequency band listed in Column 1 of Table 5, if the field strength exceeds the value given in Column 2 or 3 of Table 5, when averaged spatially and over time, or if the power density exceeds the value given in Column 4 of Table 5, when averaged spatially and over time. Page 7 of 13 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U20918-E10 DATE: JULY 29, 2015 FCC ID: A4RRUX-J42 IC: 10395A-RUXJ42 5.3. EQUATIONS POWER DENSITY Power density is given by: S = EIRP / (4 * Pi * D^2) Where S = Power density in mW/cm^2 EIRP = Equivalent Isotropic Radiated Power in mW D = Separation distance in cm Power density in units of mW/cm^2 is converted to units of W/m^2 by multiplying by 10. DISTANCE Distance is given by: D = SQRT (EIRP / (4 * Pi * S)) Where D = Separation distance in cm EIRP = Equivalent Isotropic Radiated Power in mW S = Power density in mW/cm^2 SOURCE-BASED DUTY CYCLE Where applicable (for example, multi-slot cell phone applications) a duty cycle factor may be applied. Source-based time-averaged EIRP = (DC / 100) * EIRP Where DC = Duty Cycle in %, as applicable EIRP = Equivalent Isotropic Radiated Power in W Page 8 of 13 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U20918-E10 DATE: JULY 29, 2015 FCC ID: A4RRUX-J42 IC: 10395A-RUXJ42 MIMO AND COLOCATED TRANSMITTERS (IDENTICAL LIMIT FOR ALL TRANSMITTERS) For multiple chain devices, and colocated transmitters operating simultaneously in frequency bands where the limit is identical, the total power density is calculated using the total EIRP obtained by summing the EIRP (in linear units) of each transmitter. Total EIRP = (EIRP1) + (EIRP2) + ... + (EIRPn) where EIRPx = Source-based time-averaged EIRP of chain x or transmitter x The total EIRP is then used to calculate the Power Density or the Distance as applicable. MIMO AND COLOCATED TRANSMITTERS For multiple colocated transmitters operating simultaneously in frequency bands where different limits apply: The Power Density at the specified separation distance is calculated for each transmitter chain or transmitter. The fraction of the exposure limit is calculated for each chain or transmitter as (Power Density of chain or transmitter) / (Limit applicable to that chain or transmitter). The fractions are summed. Compliance is established if the sum of the fractions is less than or equal to one. Page 9 of 13 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U20918-E10 DATE: JULY 29, 2015 FCC ID: A4RRUX-J42 IC: 10395A-RUXJ42 5.4. LIMITS AND IC EXEMPTION VARIABLE LIMITS For mobile radio equipment operating in the cellular phone band, the lowest power density limit is calculated using the lowest frequency: 824 MHz / 1500 = 0.55 mW/cm^2 (FCC) 824 MHz / 150 = 5.5 W/m^2 (IC). FIXED LIMITS For operation in the PCS band, the 2.4 GHz band and the 5 GHz bands: From FCC §1.1310 Table 1 (B), the maximum value of S = 1.0 mW/cm^2 From IC Safety Code 6, Section 2.2 Table 5 Column 4, S = 10 W/m^2 INDUSTRY CANADA EXEMPTION RSS-102 Clause 2.5.2 RF exposure evaluation is required if the separation distance between the user and the device’s radiating element is greater than 20 cm, except when the device operates as follows: • at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1.31 x 10^-2 ƒ^0.6834 W (adjusted for tune-up tolerance), where ƒ is in MHz; Page 10 of 13 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U20918-E10 DATE: JULY 29, 2015 FCC ID: A4RRUX-J42 IC: 10395A-RUXJ42 6. RF EXPOSURE RESULTS In the table(s) below, Power and Gain are entered in units of dBm and dBi respectively and conversions to linear forms are used for the calculations. (Single chain transmitters, no colocation, MPE distance > 20 cm) Band Mode FCC IC Output Antenna EIRP Duty EIRP Separation Limit Limit AVG Gain Cycle Distance Power (mW/cm^2) (W/m^2) (dBm) (dBi) (dBm) (%) (mW) (cm) 2.4 GHz BLE 1.00 10.0 7.53 3.10 10.63 60.4 7.0 0.75 2.4 GHz WLAN 1.00 10.0 19.02 3.10 22.12 100.0 162.9 3.60 5 GHz WLAN 1.00 10.0 17.55 1.70 19.25 98.3 82.7 2.57 Band @ FCC Power IC Power Distance Density Density (mW/cm^2) (mW/cm^2) 2.4 GHz 0.001 0.014 2.4 GHz 20.00 0.032 0.324 5 GHz 0.016 0.165 BLE/2.4GHz WLAN Combined 0.034 0.338 20.00 BLE/5GHz WLAN Combined 0.018 0.179 The device operates above 300 MHz and below 6 GHz with a maximum EIRP less than or equal to 2.7 Watts in 2.4GHz band and 4.9 Watts in the 5GHz bands as a mobile device with a minimum separation distance of 20 cm, therefore it is exempt from routine RF Exposure Evaluation under RSS-102. Page 11 of 13 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U20918-E10 DATE: JULY 29, 2015 FCC ID: A4RRUX-J42 IC: 10395A-RUXJ42 (Multiple chain transmitters all with same Power Density limit, MPE distance > 20 cm) Multiple chain - BLE and 2.4GHZ WLAN Multiple chain - BLE and 5GHZ WLAN Band (GHz) 2.4 2.4 Band (GHz) 2.4 5 Mode BLE WLAN Mode BLE WLAN Transmitter Ant. 1 Ant. 2 Transmitter Ant. 2 Ant. 3 Separation (cm) Separation (cm) 20 20 20 20 Distance Distance Output Power (dBm) 7.5 19.0 Output Power (dBm) 7.5 17.6 Antenna Gain (dBi) 3.0 3.1 Antenna Gain (dBi) 3.1 1.7 Duty Cycle (%) 60 100 Duty Cycle (%) 60 98 Source Based (mW) Source Based (mW) 6.8 162.9 7.0 82.7 EIRP EIRP FCC Power (mW/cm^2) FCC Power (mW/cm 0.001 0.032 0.001 0.016 Density Density ^2) FCC Power (mW/cm^2) FCC Power (mW/cm Density Limit 1 1 Density Limit ^2) 1 1 IC Power (W/m^2) IC Power (W/m^2) Density 0.014 0.324 Density 0.014 0.165 IC Power (W/m^2) IC Power (W/m^2) Density Limit 10 10 Density Limit 10 10 Fraction of Limit (%) Fraction of Limit (%) 0.1 3.2 0.1 1.6 Sum of 3.4 Sum of 1.8 Fractions (%) Fractions (%) Page 12 of 13 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 15U20918-E10 DATE: JULY 29, 2015 FCC ID: A4RRUX-J42 IC: 10395A-RUXJ42 Notes: 1) For MPE the new KDB 447498 requires the calculations to use the maximum rated power; that power should be declared by the manufacturer, and should not be lower than the measured power. If the power has a tolerance then we also need to check that the measured power is within the tolerance. 2) A tolerance value of +2 dB was included in the output power values above to cover the output power tolerance of +/-2 dB under extreme conditions in the real filed as declared by the client. 3) The manufacturer configures output power so that the maximum power, after accounting for manufacturing tolerances, will never exceed the maximum power level measured. 4) The output power in the tables above is the maximum power per chain among various channels and various modes within the specific band. 5) The antenna gain in the tables above is the maximum antenna gain among various channels within the specified band. END OF REPORT Page 13 of 13 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


Document Created: 2019-10-10 06:55:56
Document Modified: 2019-10-10 06:55:56
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC