RF Exposure Report

FCC ID: A4RH2G2-2A

RF Exposure Info

Download: PDF
FCCID_2408405

      FCC Part 1 Subpart I
      FCC Part 2 Subpart J

    RF EXPOSURE REPORT

             FOR

   MEDIA STREAMING DEVICE


      FCC ID: A4RH2G2-2A

 REPORT NUMBER: 14U18503-E6

ISSUE DATE: SEPTEMBER 15, 2014

          Prepared for
         GOOGLE INC.
 1600 AMPHITHEATRE PARKWAY
MOUNTAIN VIEW, CA 94043, U.S.A.

          Prepared by
UL VERIFICATION SERVICES INC.
    47173 BENICIA STREET
  FREMONT, CA 94538, U.S.A.
      TEL: (510) 771-1000
      FAX: (510) 661-0888


REPORT NO: 14U18503-E6                                                                 DATE: SEPTEMBER 15, 2014
FCC ID: A4RH2G2-2A

                                                  Revision History



            Issue
 Rev.       Date             Revisions                                                                  Revised By
  --        9/15/14          Initial Issue                                                              G. Victorine




                                      Page 2 of 9
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO: 14U18503-E6                                                                                DATE: SEPTEMBER 15, 2014
FCC ID: A4RH2G2-2A

                                                TABLE OF CONTENTS
1.     ATTESTATION OF TEST RESULTS ................................................................................. 4

2.     TEST METHODOLOGY ..................................................................................................... 5

3.     REFERENCES ................................................................................................................... 5

4.     FACILITIES AND ACCREDITATION ................................................................................. 5

5.     MAXIMUM PERMISSIBLE RF EXPOSURE ....................................................................... 6
     5.1.    FCC RULES ................................................................................................................ 6
     5.2.    EQUATIONS................................................................................................................ 7
     5.3.    LIMITS ......................................................................................................................... 8

6.     RF EXPOSURE RESULTS ................................................................................................. 9




                                      Page 3 of 9
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
     This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO: 14U18503-E6                                                                 DATE: SEPTEMBER 15, 2014
FCC ID: A4RH2G2-2A


1. ATTESTATION OF TEST RESULTS
COMPANY NAME:                       GOOGLE INC.
                                    1600 AMPHITHEATRE PARKWAY
                                    MOUNTAIN VIEW, CA 94043, U.S.A.

EUT DESCRIPTION:                    MEDIA STREAMING DEVICE

UNIQUE IDENTIFIER:                  FCC ID: A4RH2G2-2A

SERIAL NUMBER:                      4728102ZZB82 (CONDUCTED); 4729102ZZCA9 (RADIATED)

DATE TESTED:                        AUGUST 13, 2014 – AUGUST 20, 2014

                                          APPLICABLE STANDARDS
                               STANDARD                                                 TEST RESULTS
          FCC PART 1 SUBPART I & PART 2 SUBPART J                                              Pass


UL Verification Services Inc. calculated the RF Exposure of the above equipment in accordance
with the requirements set forth in the above standards, using test results reported in the test
report documents referenced below and/or documentation furnished by the applicant. All
indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc.
based on interpretations of these calculations. The results show that the equipment is capable
of demonstrating compliance with the requirements as documented in this report.

Note: The results documented in this report apply only to the tested sample, under the
conditions and modes of operation as described herein. This document may not be altered or
revised in any way unless done so by UL Verification Services Inc. and all revisions are duly
noted in the revisions section. Any alteration of this document not carried out by UL Verification
Services Inc. will constitute fraud and shall nullify the document. This report must not be used
by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any
agency of the Federal Government, or any agency of any government.

Approved & Released For
UL Verification Services Inc. By:                                 Calculated By:




GARY VICTORINE                                                   TINA CHU
PROJECT LEAD                                                     LAB TECHNICIAN
UL Verification Services Inc.                                    UL Verification Services Inc.




                                      Page 4 of 9
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO: 14U18503-E6                                                                 DATE: SEPTEMBER 15, 2014
FCC ID: A4RH2G2-2A


2. TEST METHODOLOGY
All calculations were made in accordance with FCC OET Bulletin 65 Edition 97-01.


3. REFERENCES
All measurements were made as documented in test report UL Verification Services Inc.
Document 14U18503-E1 for 2.4 GHz band.

Output power, Duty cycle and Antenna gain data is excerpted from the applicable test reports.

Antenna gain data is excerpted from the applicable test reports.



4. FACILITIES AND ACCREDITATION
The test sites and measurement facilities used to collect data are located at 47173 and 47266
Benicia Street, Fremont, California, USA.


UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. The full
scope of accreditation can be viewed at http://ts.nist.gov/standards/scopes/2000650.htm.




                                      Page 5 of 9
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO: 14U18503-E6                                                                 DATE: SEPTEMBER 15, 2014
FCC ID: A4RH2G2-2A

5. MAXIMUM PERMISSIBLE RF EXPOSURE
   5.1.          FCC RULES
§1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of
human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case
of portable devices which shall be evaluated according to the provisions of §2.1093 of this
chapter.




                                      Page 6 of 9
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO: 14U18503-E6                                                                 DATE: SEPTEMBER 15, 2014
FCC ID: A4RH2G2-2A

   5.2.          EQUATIONS
POWER DENSITY

Power density is given by:

S = EIRP / (4 * Pi * D^2)

Where

S = Power density in mW/cm^2
EIRP = Equivalent Isotropic Radiated Power in mW
D = Separation distance in cm

Power density in units of mW/cm^2 is converted to units of W/m^2 by multiplying by 10.


DISTANCE

Distance is given by:

D = SQRT (EIRP / (4 * Pi * S))

Where

D = Separation distance in cm
EIRP = Equivalent Isotropic Radiated Power in mW
S = Power density in mW/cm^2


SOURCE-BASED DUTY CYCLE

Where applicable (for example, multi-slot cell phone applications) a duty cycle factor may be
applied.

Source-based time-averaged EIRP = (DC / 100) * EIRP

Where

DC = Duty Cycle in %, as applicable
EIRP = Equivalent Isotropic Radiated Power in W




                                      Page 7 of 9
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO: 14U18503-E6                                                                 DATE: SEPTEMBER 15, 2014
FCC ID: A4RH2G2-2A

   5.3.          LIMITS
VARIABLE LIMITS

For mobile radio equipment operating in the cellular phone band, the lowest power density limit
is calculated using the lowest frequency:

824 MHz / 1500 = 0.55 mW/cm^2 (FCC)


FIXED LIMITS

For operation in the PCS band, the 2.4 GHz band and the 5 GHz bands:

From FCC §1.1310 Table 1 (B), the maximum value of S = 1.0 mW/cm^2




                                      Page 8 of 9
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


REPORT NO: 14U18503-E6                                                                 DATE: SEPTEMBER 15, 2014
FCC ID: A4RH2G2-2A

6. RF EXPOSURE RESULTS
In the table(s) below, Power and Gain are entered in units of dBm and dBi respectively and
conversions to linear forms are used for the calculations.

Single Chain and non-colocated transmitters
  Band       Mode      Separation Output Antenna Duty EIRP FCC Power
                        Distance      AVG   Gain Cycle        Density
                                    Power
                          (cm)       (dBm)  (dBi) (%)  (mW) (mW/cm^2)
 2.4 GHz        WLAN              20           20.00       1.90      100.0 154.9           0.031

The device operates above 1.5 GHz with a maximum power density of 0.031 mW/cm^2. The
FCC power density limit is 1 mW/cm^2. Therefore, the device meets the FCC limits for
maximum permissible exposure (MPE).


Notes:

   1) The manufacturer configures output power so that the maximum power, after accounting
      for manufacturing tolerances, will never exceed 20 dBm.

   2) The output power in the tables above is the maximum power per chain among various
      channels and various modes within the specific band.

   3) The antenna gain in the tables above is the maximum antenna gain among various
      channels within the specified band.



                                             END OF REPORT




                                      Page 9 of 9
UL VERIFICATION SERVICES INC.                                         FORM NO: CCSUP4701I
47173 BENICIA STREET, FREMONT, CA 94538, USA      TEL: (510) 771-1000    FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.



Document Created: 2019-07-09 13:15:31
Document Modified: 2019-07-09 13:15:31

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC