FCC_IC_MPE_Google_H0ME_rev 2

FCC ID: A4RH0ME

RF Exposure Info

Download: PDF
FCCID_3153641

EMC Test Data Client: Google Inc Job Number: JD101591 T-Log Number: T102213 Model: H0ME Project Manager: Deepa Shetty Contact: Dominik Mente Project Coordinator: - Standard: FCC 15.247/15.407/RSS-247 Class: N/A Maximum Permissible Exposure / SAR Exclusion Test Specific Details The objective of this test session is to perform final qualification testing of the EUT with respect to the Objective: specification listed above. Date of Test: 8/25/2016 Test Engineer: Mark Hill General Test Configuration Calculation uses the free space transmission formula: S = (PG)/(4 πd2) Where: S is power density (W/m2), P is output power (W), G is antenna gain relative to isotropic, d is separation distance from the transmitting antenna (m). Summary of Results Device complies with Power Density requirements at 20cm Yes ti separation: Modifications Made During Testing No modifications were made to the EUT during testing Deviations From The Standard No deviations were made from the requirements of the standard. Note: Power values from maximum power plus tune-up tolerance FCC ID: A4RH0ME IC: 10395A-H0ME T102213 (FCC_IC_Wifi_BLE_conducted) MPE Calc Page 1 of 2

EMC Test Data Client: Google Inc Job Number: JD101591 T-Log Number: T102213 Model: H0ME Project Manager: Deepa Shetty Contact: Dominik Mente Project Coordinator: - Standard: FCC 15.247/15.407/RSS-247 Class: N/A FCC MPE Calculation Use: General Antenna: Antenna (1,2): 2.7 dBi and 3.3dBi max @ 2.4GHz, 5.3dBi and 5.7dBi @ 5GHz EUT Cable Loss Ant Power Power Density (S) MPE Limit Freq. Power Loss Gain at Ant EIRP at 20 cm at 20 cm MHz dBm mW* dB dBi dBm mW mW/cm^2 mW/cm^2 2440 7.6 5.8 0 3.3 7.6 12.30 0.002 1.000 2437 19.0 79.4 0 3.3 19.0 169.82 0.034 1.000 5200 17.0 50.1 0 5.7 17.0 186.21 0.037 1.000 5300 16.0 39.8 0 5.7 16.0 147.91 0.029 1.000 5580 16.0 39.8 0 5.7 16.0 147.91 0.029 1.000 5785 16.0 39.8 0 5.7 16.0 147.91 0.029 1.000 Simultaneous Transmission - 802.11 and Bluetooth - using worse case operation Power Density (S) MPE Limit Freq. at 20 cm at 20 cm MHz mW/cm^2 mW/cm^2 % of limit 2440 0.002 1.000 0.2 5200 0.048 1.000 4.8 Total: 5.0 50 Industry Canada MPE Calculation Use: General Antenna: Antenna (1,2): 2.7 dBi and 3.3dBi max @ 2.4GHz, 5.3dBi and 5.7dBi @ 5GHz EUT Cable Loss Ant Power Power Density (S) MPE Limit Freq. Power Loss Gain at Ant EIRP at 20 cm at 20 cm MHz dBm mW* dB dBi dBm mW mW/cm^2 mW/cm^2 2440 7.6 5.8 0 3.3 7.6 12.30 0.002 0.541 2437 19.0 79.4 0 3.3 19.0 169.82 0.034 0.540 5200 17.0 50.1 0 5.7 17.0 186.21 0.037 0.907 5300 16.0 39.8 0 5.7 16.0 147.91 0.029 0.919 5580 16.0 39.8 0 5.7 16.0 147.91 0.029 0.952 5785 16.0 39.8 0 5.7 16.0 147.91 0.029 0.976 Note - highest gain used for all calculations as worse case. Simultaneous Transmission - 802.11 and Bluetooth - using worse case operation Power Density (S) MPE Limit Freq. at 20 cm at 20 cm MHz mW/cm^2 mW/cm^2 % of limit 2440 0.002 0.541 0.3 5200 0.048 0.907 5.3 Total: 5.6 T102213 (FCC_IC_Wifi_BLE_conducted) MPE Calc Page 2 of 2


Document Created: 2016-09-22 11:30:54
Document Modified: 2016-09-22 11:30:54
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC