Test Report_20190709_v1 - A4RG020MN_TestRpt_DXX_NFC

FCC ID: A4RG020MN

Test Report

Download: PDF
FCCID_4414276

FCC RADIO TEST REPORT Report No. : FR8N0616-06D FCC RADIO TEST REPORT FCC ID : A4RG020MN Equipment : Phone Model Name : G020M, G020N Applicant : Google LLC 1600 Amphitheatre Parkway, Mountain View, California, 94043 USA Standard : FCC Part 15 Subpart C §15.225 The product was received on Nov. 06, 2018 and testing was started from May 22, 2019 and completed on May 22, 2019. We, SPORTON INTERNATIONAL INC., EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any agency of government. The test results in this variant report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Reviewed by: Jones Tsai SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory st No. 52, Huaya 1 Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886-3-327-3456 Page Number : 1 of 16 FAX : 886-3-328-4978 Issued Date : Jul. 04, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR8N0616-06D Table of Contents History of this test report ....................................................................................................................................3 Summary of Test Result......................................................................................................................................4 1. General Description ........................................................................................................................................5 1.1 Product Feature of Equipment Under Test ............................................................................................................. 5 1.2 Product Specification of Equipment Under Test ..................................................................................................... 5 1.3 Modification of EUT ................................................................................................................................................ 5 1.4 Testing Location ..................................................................................................................................................... 6 1.5 Applicable Standards.............................................................................................................................................. 6 2. Test Configuration of Equipment Under Test ...............................................................................................7 2.1 Descriptions of Test Mode ...................................................................................................................................... 7 2.2 Connection Diagram of Test System ...................................................................................................................... 7 2.3 Table for Supporting Units ...................................................................................................................................... 7 2.4 EUT Operation Test Setup ..................................................................................................................................... 8 3. Test Results .....................................................................................................................................................9 3.1 Field Strength of Fundamental Emissions and Mask Measurement ....................................................................... 9 3.2 Radiated Emissions Measurement ....................................................................................................................... 11 3.3 Antenna Requirements ......................................................................................................................................... 14 4. List of Measuring Equipment ...................................................................................................................... 15 5. Uncertainty of Evaluation ............................................................................................................................ 16 Appendix A. Test Results of Radiated Test Items A1. Test Result of Field Strength of Fundamental Emissions A2. Results of Radiated Emissions (9 kHz~30MHz) A3. Results of Radiated Emissions (30MHz~1GHz) TEL : 886-3-327-3456 Page Number : 2 of 16 FAX : 886-3-328-4978 Issued Date : Jul. 04, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR8N0616-06D History of this test report Report No. Version Description Issued Date FR8N0616-06D 01 Initial issue of report Jul. 04, 2019 TEL : 886-3-327-3456 Page Number : 3 of 16 FAX : 886-3-328-4978 Issued Date : Jul. 04, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR8N0616-06D Summary of Test Result Report Ref Std. Result Test Items Remark Clause Clause (PASS/FAIL) - 15.207 AC Power Line Conducted Emissions Not Required - 15.215(c) 20dB Spectrum Bandwidth Not Required - - 2.1049 99% OBW Spectrum Bandwidth Not Required - - 15.225(e) Frequency Stability Not Required - Max level 3.1 15.225(a)(b)(c) Field Strength of Fundamental Emissions Not Required 21.97 dBμV/m at 13.560 MHz Under limit 15.225(d) 3.2 Radiated Spurious Emissions Pass 5.61 dB at 15.209 45.520MHz 3.3 15.203 Antenna Requirements Pass - Remark: This is a variant report. All the test cases were performed on original report which can be referred to Sporton Report Number FR8N0616-05D. Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Reviewed by: Wii Chang Report Producer: Elise Chang TEL : 886-3-327-3456 Page Number : 4 of 16 FAX : 886-3-328-4978 Issued Date : Jul. 04, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR8N0616-06D 1. General Description 1.1 Product Feature of Equipment Under Test Product Feature & Specification Equipment Phone Model Name G020M, G020N FCC ID A4RG020MN GSM/EGPRS/WCDMA/HSPA/LTE/NFC/GNSS/WPC WLAN 11b/g/n HT20 EUT supports Radios WLAN 11a/n HT20/HT40 application WLAN 11ac VHT20/VHT40/VHT80 Bluetooth BR/EDR/LE 60 GHz Low Power Transmitter EUT Stage Identical Prototype Remark: 1. For other wireless features of this EUT, test report will be issued separately. 2. The above EUT’s information was declared by manufacturer. EUT Information List No. S/N #1 94LAZ00CJQ 1.2 Product Specification of Equipment Under Test Standards-related Product Specification Tx/Rx Frequency Range 13.553 ~ 13.567MHz Channel Number 1 Antenna Type Loop Antenna Type of Modulation ASK Remark: 1. The above EUT's information was declared by manufacturer. 2. For Radiated Test Cases, the tests were performed with Adapter 1 1.3 Modification of EUT No modifications are made to the EUT during all test items. TEL : 886-3-327-3456 Page Number : 5 of 16 FAX : 886-3-328-4978 Issued Date : Jul. 04, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR8N0616-06D 1.4 Testing Location Test Site SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) Test Site Location TEL: +886-3-327-0868 FAX: +886-3-327-0855 Sporton Site No. Test Site No. 03CH11-HY Test Engineer Fu Chen Temperature 21~26°C Relative Humidity 51~56% Note: The test site complies with ANSI C63.4 2014 requirement. FCC designation No.: TW0007 1.5 Applicable Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  FCC Part 15 Subpart C §15.225  FCC KDB 414788 D01 Radiated Test Site v01r01  ANSI C63.10-2013 TEL : 886-3-327-3456 Page Number : 6 of 16 FAX : 886-3-328-4978 Issued Date : Jul. 04, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR8N0616-06D 2. Test Configuration of Equipment Under Test 2.1 Descriptions of Test Mode Investigation has been done on all the possible configurations. The following table is a list of the test modes shown in this test report. Test Items AC Power Line Conducted Emissions Field Strength of Fundamental Emissions 20dB Spectrum Bandwidth Frequency Stability Radiated Emissions 9kHz~30MHz Radiated Emissions 30MHz~1GHz The EUT pre-scanned in four NFC type, A, B, F, V. The worst type (type F) was recorded in this report. Pre-scanned tests, X, Y, Z in three orthogonal panels to determine the final configuration (Z plane as worst plane) from all possible combinations. 2.2 Connection Diagram of Test System <NFC Tx Mode> 2.3 Table for Supporting Units Item Equipment Trade Name Model Name FCC ID Data Cable Power Cord 1. NFC Card Metro Taipei Easy Card N/A N/A N/A TEL : 886-3-327-3456 Page Number : 7 of 16 FAX : 886-3-328-4978 Issued Date : Jul. 04, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR8N0616-06D 2.4 EUT Operation Test Setup The EUT was programmed to be in continuously transmitting mode. The ancillary equipment, NFC card, is used to make the EUT (NFC) continuously transmit at 13.56MHz and is placed around 3 cm gap to the EUT. TEL : 886-3-327-3456 Page Number : 8 of 16 FAX : 886-3-328-4978 Issued Date : Jul. 04, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR8N0616-06D 3. Test Results 3.1 Field Strength of Fundamental Emissions and Mask Measurement 3.1.1 Limit Rules and specifications FCC CFR 47 Part 15 section 15.225 Description Compliance with the spectrum mask is tested with RBW set to 9kHz. Field Strength Field Strength Field Strength Field Strength Freq. of Emission (MHz) (μV/m) at 30m (dBμV/m) at 30m (dBμV/m) at 10m (dBμV/m) at 3m 1.705~13.110 30 29.5 48.58 69.5 13.110~13.410 106 40.5 59.58 80.5 13.410~13.553 334 50.5 69.58 90.5 13.553~13.567 15848 84.0 103.08 124.0 13.567~13.710 334 50.5 69.58 90.5 13.710~14.010 106 40.5 59.58 80.5 14.010~30.000 30 29.5 48.58 69.5 3.1.2 Measuring Instruments See list of measuring instruments of this test report. TEL : 886-3-327-3456 Page Number : 9 of 16 FAX : 886-3-328-4978 Issued Date : Jul. 04, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR8N0616-06D 3.1.3 Test Procedures 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the loop receiving antenna mounted antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the receiving antenna was fixed at one meter above ground to find the maximum emissions field strength. 4. For Fundamental emissions, use the receiver to measure QP reading. 5. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 6. Compliance with the spectrum mask is tested with RBW set to 9kHz. Note: Emission level (dBμV/m) = 20 log Emission level (μV/m). 3.1.4 Test Setup For radiated emissions below 30MHz 3.1.5 Test Result of Field Strength of Fundamental Emissions and Mask Please refer to Appendix A. TEL : 886-3-327-3456 Page Number : 10 of 16 FAX : 886-3-328-4978 Issued Date : Jul. 04, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR8N0616-06D 3.2 Radiated Emissions Measurement 3.2.1 Limit The field strength of any emissions which appear outside of 13.110 ~14.010MHz band shall not exceed the general radiated emissions limits. Frequencies Field Strength Measurement Distance (MHz) (μV/m) (meters) 0.009~0.490 2400/F(kHz) 300 0.490~1.705 24000/F(kHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 3.2.2 Measuring Instruments See list of measuring instruments of this test report. 3.2.3 Measuring Instrument Setting The following table is the setting of receiver: Receiver Parameter Setting Attenuation Auto Frequency Range: 9kHz~150kHz RBW 200Hz for QP Frequency Range: 150kHz~30MHz RBW 9kHz for QP Frequency Range: 30MHz~1000MHz RBW 120kHz for Peak Note: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90 kHz and 110-490 kHz. Radiated emission limits in these two bands are based on measurements employing an average detector. TEL : 886-3-327-3456 Page Number : 11 of 16 FAX : 886-3-328-4978 Issued Date : Jul. 04, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR8N0616-06D 3.2.4 Test Procedures 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 6. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 7. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the recorded data should be QP measured by receiver. TEL : 886-3-327-3456 Page Number : 12 of 16 FAX : 886-3-328-4978 Issued Date : Jul. 04, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR8N0616-06D 3.2.5 Test Setup For radiated emissions below 30MHz For radiated emissions above 30MHz 3.2.6 Test Result of Radiated Emissions Measurement Please refer to Appendix A. Remark: There is a comparison data of both open-field test site and alternative test site - semi-Anechoic chamber according to 414788 D01 Radiated Test Site v01r01, and the result came out very similar. TEL : 886-3-327-3456 Page Number : 13 of 16 FAX : 886-3-328-4978 Issued Date : Jul. 04, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR8N0616-06D 3.3 Antenna Requirements 3.3.1 Standard Applicable Except for special regulations, the Low-power Radio-frequency Devices must not be equipped with any jacket for installing an antenna with extension cable. An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that the user can replace a broken antenna, but the use of a standard antenna jack or electrical connector is prohibited. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the rule. 3.3.2 Antenna Anti-Replacement Construction An embedded-in antenna design is used. TEL : 886-3-327-3456 Page Number : 14 of 16 FAX : 886-3-328-4978 Issued Date : Jul. 04, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR8N0616-06D 4. List of Measuring Equipment Calibration Instrument Manufacturer Model No. Serial No. Characteristics Test Date Due Date Remark Date E3 Radiation Software Audix RK-001042 N/A N/A May 22, 2019 N/A 6.2009-8-24 (03CH11-HY) Radiation Amplifier SONOMA 310N 187312 9kHz~1GHz Dec. 04, 2018 May 22, 2019 Dec. 03, 2019 (03CH11-HY) CBL 6111D&N 35414&AT-N0 Radiation Bilog Antenna TESEQ 30MHz~1GHz Oct. 13, 2018 May 22, 2019 Oct. 12, 2019 -6-06 602 (03CH11-HY) Spectrum Radiation Keysight N9010A MY54200486 10Hz ~ 44GHz Oct. 19, 2018 May 22, 2019 Oct. 18, 2019 Analyzer (03CH11-HY) Radiation Antenna Mast EMEC AM-BS-4500-B N/A 1~4m N/A May 22, 2019 N/A (03CH11-HY) Radiation Turn Table EMEC TT 2000 N/A 0~360 Degree N/A May 22, 2019 N/A (03CH11-HY) Radiation EMI Test Receiver Keysight N9038A(MXE) MY53290045 N/A Jan. 19, 2019 May 22, 2019 Jan. 18, 2020 (03CH11-HY) WHK20/1000C Radiation Filter Wainwright SN2 20M High Pass Sep. 16, 2018 May 22, 2019 Sep. 15, 2019 7/40SS (03CH11-HY) HUBER + SUCOFLEX Radiation RF Cable MY9837/4PE 9kHz-30MHz Mar. 13, 2019 May 22, 2019 Mar. 12, 2020 SUHNER 104 (03CH11-HY) HUBER + SUCOFLEX Radiation RF Cable MY9837/4PE 30M-18G Mar. 13, 2019 May 22, 2019 Mar. 12, 2020 SUHNER 104 (03CH11-HY) HUBER + SUCOFLEX Radiation RF Cable MY2859/2 30MHz-40GHz Mar. 13, 2019 May 22, 2019 Mar. 12, 2020 SUHNER 102 (03CH11-HY) Rohde & Radiation Loop Antenna HFH2-Z2 100488 9 kHz~30 MHz Jan. 07, 2019 May 22, 2019 Jan. 06, 2020 Schwarz (03CH11-HY) TEL : 886-3-327-3456 Page Number : 15 of 16 FAX : 886-3-328-4978 Issued Date : Jul. 04, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR8N0616-06D 5. Uncertainty of Evaluation Uncertainty of Conducted Emission Measurement (150 kHz ~ 30 MHz) Measuring Uncertainty for a Level of Confidence 2.20 of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (9 kHz ~ 30 MHz) Measuring Uncertainty for a Level of Confidence 3.45 of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (30 MHz ~ 1000 MHz) Measuring Uncertainty for a Level of Confidence 5.20 of 95% (U = 2Uc(y)) TEL : 886-3-327-3456 Page Number : 16 of 16 FAX : 886-3-328-4978 Issued Date : Jul. 04, 2019 Report Template No.: BU5-FR15CNFC Version 2.4 Report Version : 01

FCC RADIO TEST REPORT Report No. : FR8N0616-06D Appendix A. Test Results of Radiated Test Items A1. Test Result of Field Strength of Fundamental Emissions Test Mode: NFC Tx Test Frequency (MHz) 13.56 Distance Frequency Level Over Limit Read Antenna Cable Ant Table Remark extrapolation Factor Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 13.56 21.97 40 -62.03 84 40.65 21.18 0.14 100 335 QP TEL : 886-3-327-3456 Page Number : A1 of A6 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR8N0616-06D Test Mode: NFC Tx Test Frequency (MHz) 13.56 Distance Frequency Level Over Limit Read Antenna Cable Ant Table Remark extrapolation Factor Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 13.56 19.16 40 -64.84 84 37.84 21.18 0.14 100 256 QP TEL : 886-3-327-3456 Page Number : A2 of A6 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR8N0616-06D A2. Results of Radiated Spurious Emissions (9 kHz~30MHz) Test Mode: NFC Tx Polarization : Horizontal Distance Frequency Level Over Limit Read Antenna Cable Ant Table Remark extrapolation Factor Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 0.01925 3.62 80 -38.3 41.92 63.83 19.78 0.01 Average 0.06246 -20.62 80 -52.31 31.69 40.12 19.25 0.01 Average 0.0938 -24.28 80 -52.44 28.16 36.59 19.12 0.01 QP 0.14068 -24.99 80 -49.63 24.64 35.94 19.06 0.01 Average 0.15578 -19.96 80 -43.71 23.75 40.99 19.04 0.01 Average 1.579 8.35 40 -15.29 23.64 29.04 19.3 0.01 100 0 QP 8.264 1.71 40 -27.79 29.5 21.14 20.45 0.12 QP 13.56 21.87 40 -7.63 29.5 40.55 21.18 0.14 QP 16.918 -2.12 40 -31.62 29.5 16.27 21.45 0.16 QP 25.875 -2.06 40 -31.56 29.5 15.99 21.76 0.19 QP TEL : 886-3-327-3456 Page Number : A3 of A6 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR8N0616-06D Test Mode: NFC Tx Polarization : Vertical Distance Frequency Level Over Limit Read Antenna Cable Ant Table Remark extrapolation Factor Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 0.01925 2.86 80 -39.06 41.92 63.07 19.78 0.01 Average 0.06249 -20.18 80 -51.87 31.69 40.56 19.25 0.01 Average 0.0938 -23.15 80 -51.31 28.16 37.72 19.12 0.01 QP 0.14068 -23.62 80 -48.26 24.64 37.31 19.06 0.01 Average 0.15646 -21.11 80 -44.83 23.72 39.84 19.04 0.01 Average 1.391 11.82 40 -12.92 24.74 32.51 19.3 0.01 100 0 QP 8.4 3.41 40 -26.09 29.5 22.81 20.48 0.12 QP 13.56 18.96 40 -10.54 29.5 37.64 21.18 0.14 QP 19.141 -1.47 40 -30.97 29.5 16.73 21.63 0.17 QP 25.55 -1.81 40 -31.31 29.5 16.24 21.76 0.19 QP Note: 1. 13.56 MHz is fundamental signal which can be ignored. 2. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 3. Distance extrapolation factor = 40 log (specific distance / test distance) (dB); TEL : 886-3-327-3456 Page Number : A4 of A6 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR8N0616-06D A3. Results of Radiated Spurious Emissions (30MHz~1GHz) Test Mode: NFC Tx Polarization : Horizontal Frequency Level Over Limit Read Antenna Cable Preamp Ant Table Remark Limit Line Level Factor Loss Factor Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( dB ) ( cm ) ( deg ) 40.67 23.26 -16.74 40 35.99 18.7 0.84 32.37 Peak 44.55 26 -14 40 40.61 16.8 0.88 32.37 Peak 94.99 26.21 -17.29 43.5 41.97 15.13 1.29 32.33 Peak 160.95 27.31 -16.19 43.5 41.54 16.26 1.68 32.27 Peak 797.27 31.92 -14.08 46 30.41 28.17 3.77 31.89 Peak 868.08 33.41 -12.59 46 30.55 29.27 3.94 31.52 Peak 954.41 34.59 -11.41 46 29.33 30.77 4.13 30.85 100 0 Peak 40.67 23.26 -16.74 40 35.99 18.7 0.84 32.37 Peak TEL : 886-3-327-3456 Page Number : A5 of A6 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR8N0616-06D Test Mode: NFC Tx Polarization : Vertical Frequency Level Over Limit Read Antenna Cable Preamp Ant Table Remark Limit Line Level Factor Loss Factor Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( dB ) ( cm ) ( deg ) 40.67 33.13 -6.87 40 45.86 18.7 0.84 32.37 100 129 QP 40.67 36.15 -3.85 40 48.88 18.7 0.84 32.37 100 129 Peak 45.52 34.39 -5.61 40 49.47 16.32 0.89 32.37 100 54 QP 45.52 37.58 -2.42 40 52.66 16.32 0.89 32.37 100 54 Peak 73.65 24.74 -15.26 40 43.45 12.4 1.13 32.35 Peak 762.35 31.74 -14.26 46 31.2 27.89 3.7 31.97 Peak 853.53 33.37 -12.63 46 30.6 29.19 3.91 31.6 Peak 956.35 34.76 -11.24 46 29.37 30.85 4.13 30.83 Peak Note: 1. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 2. Emission level (dBμV/m) = 20 log Emission level (μV/m). 3. Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor= Level. ─────THE END───── TEL : 886-3-327-3456 Page Number : A6 of A6 FAX : 886-3-328-4978


Document Created: 2019-09-03 17:07:00
Document Modified: 2019-09-03 17:07:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC