User Manual_20190116_v1 - User Manual_Regulatory information

FCC ID: A4RG020E

Users Manual

Download: PDF
FCCID_4154616

Regulatory information The regulatory information, certification, and compliance marks specific to your phone can be found on your device under setting: Settings > About phone > Regulatory labels. Additional regulatory and environmental information can be found at g.co/pixel/reg EMC compliance statement Important: This device, power adapter, and other in-box accessories have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. Federal Communications Commission (FCC) Regulatory Compliance Note: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the device and receiver. ● Connect the device into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Google could void your authority to operate the device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Radio Frequency Exposure This device meets the U.S. FCC's requirements for exposure to radio waves and is designed and manufactured not to exceed the FCC's emission limits for exposure to radio frequency (RF) energy. For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device, including its antenna, and the user's body.

Specific Absorption Rate (SAR) Information This device is designed to meet the requirements for exposure to radio waves established by the FCC. The Specific Absorption Rate (SAR) limit adopted by the FCC is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this type of device complies with this limit. Your phone complies with RF specifications when used near your ear or at a distance of 1.0 cm (0.4 in) from your body. Ensure that the device’s accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. Hearing Aid Compatibility (HAC) Your phone has been evaluated and certified to be compatible with hearing aids per technical specification ANSI C63.19-2011. There are two measures of hearing aid compatibility: M rating, which is a measure of immunity to RF interference for acoustic coupling hearing aids; and T rating, which is a measure of performance when used with an inductive coupling (telecoil) hearing aid. Google’s devices meet HAC requirements set by the FCC. Per FCC rules, a mobile phone is considered hearing aid compatible if rated M3 or M4 for acoustic coupling or T3 or T4 for inductive coupling. Your phone has been tested and rated for use with hearing aids for some of the wireless technologies that they use. It is important to try the different features of your phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or Google for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer.


Document Created: 2019-01-11 21:52:31
Document Modified: 2019-01-11 21:52:31
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC