Test Report_20190123_v1 - Test Report (Co-located) rev 2

FCC ID: A4RG020A

Test Report

Download: PDF
FCCID_4173812

FCC Test Report (Co-Located) Report No.: RF181001C06-6 FCC ID: A4RG020A Model Name: G020A Received Date: Oct. 01, 2018 Test Date: Dec. 04 ~ Dec. 14, 2018 Issued Date: Dec. 18, 2018 Applicant: Google LLC Address: 1600 Amphitheatre Parkway, Mountain View, CA 94043, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) Test Location (1): No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) Test Location (2): E-2, No. 1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan (R.O.C.) FCC Registration / 788550 / TW0003 Designation Number (1): FCC Registration / 723255 / TW2022 Designation Number (2): This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF181001C06-6 Page No. 1 / 45 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 12 3.3 Description of Support Units ............................................................................................................. 14 3.3.1 Configuration of System under Test .................................................................................................. 14 3.4 General Description of Applied Standards ........................................................................................ 14 4 Test Types and Results ...................................................................................................................... 15 4.1 Radiated Emission and Bandedge Measurement............................................................................. 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 15 4.1.2 Test Instruments ................................................................................................................................ 16 4.1.3 Test Procedures................................................................................................................................. 17 4.1.4 Deviation from Test Standard ............................................................................................................ 17 4.1.5 Test Setup .......................................................................................................................................... 18 4.1.6 EUT Operating Conditions................................................................................................................. 19 4.1.7 Test Results for Fundamental and Harmonic above 1GHz ............................................................... 20 4.1.8 Test Results for Bandedge above 1GHz ........................................................................................... 26 4.1.9 Test Results for below 1GHz ............................................................................................................. 36 4.2 Conducted Out of Band Emission Measurement .............................................................................. 42 4.2.1 Limits of Conducted Out of Band Emission Measurement................................................................ 42 4.2.2 Test Setup .......................................................................................................................................... 42 4.2.3 Test Instruments ................................................................................................................................ 42 4.2.4 Test Procedure .................................................................................................................................. 42 4.2.5 Deviation from Test Standard ............................................................................................................ 42 4.2.6 EUT Operating Condition .................................................................................................................. 42 4.2.7 Test Results ....................................................................................................................................... 43 5 Pictures of Test Arrangements .......................................................................................................... 44 Appendix – Information of the Testing Laboratories ................................................................................. 45 Report No.: RF181001C06-6 Page No. 2 / 45 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF181001C06-6 Original release Dec. 18, 2018 Report No.: RF181001C06-6 Page No. 3 / 45 Report Format Version: 6.1.1

1 Certificate of Conformity Product: Smartphone Model Name: G020A Sample Status: Identical Prototype Applicant: Google LLC Test Date: Dec. 04 ~ Dec. 14, 2018 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) 47 CFR FCC Part 15, Subpart E (Section 15.407) ANSI C63.10-2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Dec. 18, 2018 Pettie Chen / Senior Specialist Approved by : , Date: Dec. 18, 2018 Bruce Chen / Project Engineer Report No.: RF181001C06-6 Page No. 4 / 45 Report Format Version: 6.1.1

2 Summary of Test Results Applied 47 CFR FCC Part 15, Subpart C (Section 15.247) Standard: 47 CFR FCC Part 15, Subpart E (Section 15.407) FCC Test Item Result Remarks Clause 15.205 / 15.209 / Meet the requirement of limit. 15.247(d) Radiated Emissions Pass Minimum passing margin is -1.6dB at 15.407(b) 5150.00MHz. (1/2/3/4(i/ii)/6) 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) Radiated Emissions up to 1 GHz 30MHz ~ 1GHz 5.31 dB 1 GHz ~ 6 GHz 3.40 dB Radiated Emissions above 1 GHz 6GHz ~ 18GHz 3.73 dB 18GHz ~ 40GHz 4.11 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF181001C06-6 Page No. 5 / 45 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product Smartphone Model Name G020A Status of EUT Identical Prototype 3.85Vdc (Battery) Power Supply Rating 5Vdc or 9Vdc (Adapter) 5Vdc (Host equipment) CCK, DQPSK, DBPSK for DSSS WLAN 256QAM, 64QAM, 16QAM, QPSK, BPSK for OFDM Modulation Type Bluetooth EDR GFSK, π/4-DQPSK, 8DPSK Bluetooth LE GFSK Modulation Technology WLAN DSSS, OFDM 802.11b: 11/5.5/2/1Mbps 802.11g: 54/48/36/24/18/12/9/6Mbps WLAN 802.11a: 54/48/36/24/18/12/9/6Mbps Transfer Rate 802.11n: up to 300Mbps 802.11ac: up to 867Mbps Bluetooth EDR 1/2/3Mbps Bluetooth LE 2Mbps 2.4GHz: 2412~2472MHz WLAN 5.0GHz: 5180~5240MHz, 5260~5320MHz, Operating Frequency 5500~5720MHz, 5745~5825MHz Bluetooth EDR 2402 ~ 2480MHz Bluetooth LE 2402 ~ 2480MHz Report No.: RF181001C06-6 Page No. 6 / 45 Report Format Version: 6.1.1

2412 ~ 2472MHz: 802.11b, 802.11g, 802.11n (HT20): 13 5180 ~ 5240MHz: 802.11a, 802.11n (HT20), 802.11ac (VHT20): 4 802.11n (HT40), 802.11ac (VHT40): 2 802.11ac (VHT80): 1 5260 ~ 5320MHz: 802.11a, 802.11n (HT20), 802.11ac (VHT20): 4 802.11n (HT40), 802.11ac (VHT40): 2 WLAN 802.11ac (VHT80): 1 Number of Channel 5500 ~ 5720MHz: 802.11a, 802.11n (HT20), 802.11ac (VHT20): 12 802.11n (HT40), 802.11ac (VHT40): 6 802.11ac (VHT80): 3 5745 ~ 5825MHz: 802.11a, 802.11n (HT20), 802.11ac (VHT20): 5 802.11n (HT40), 802.11ac (VHT40): 2 802.11ac (VHT80): 1 Bluetooth EDR 79 Bluetooth LE 40 2412 ~ 2472MHz: 320.547mW 5180 ~ 5240MHz: 111.713mW WLAN 5260 ~ 5320MHz: 109.417mW 5500 ~ 5720MHz: 110.927mW Output Power 5745 ~ 5825MHz: 108.674mW Bluetooth EDR 51.050mW LE 4.0: 9.333mW Bluetooth LE LE 5.0: 9.120mW Antenna Type Refer to Note as below Antenna Connector Refer to Note as below Power cable Refer to Note as below Accessory Device Refer to Note as below Report No.: RF181001C06-6 Page No. 7 / 45 Report Format Version: 6.1.1

Note: 1. The EUT incorporates a MIMO function. Physically, the EUT provides 2 completed transmitters and 2 receivers. Band Modulation Mode TX Function 802.11g 1TX(SISO)/2TX(MIMO) 802.11b 1TX(SISO)/2TX(MIMO) 2.4GHz 802.11n (HT20) 1TX(SISO)/2TX(MIMO) 802.11ac (VHT20) 1TX(SISO)/2TX(MIMO) 802.11a 1TX(SISO)/2TX(MIMO) 802.11n (HT20) 1TX(SISO)/2TX(MIMO) 802.11n (HT40) 1TX(SISO)/2TX(MIMO) 5GHz 802.11ac (VHT20) 1TX(SISO)/2TX(MIMO) 802.11ac (VHT40) 1TX(SISO)/2TX(MIMO) 802.11ac (VHT80) 1TX(SISO)/2TX(MIMO) * The modulation and bandwidth are similar for 802.11n mode for 20MHz/40MHz and 802.11ac mode for 20MHz/40MHz, therefore investigated worst case to representative mode in test report. (Final test mode refer section 3.2.1) 2. There’re 2 configurations for the EUT listed as below.  Main Sample: EUT + Battery 1  2nd Sample: EUT + Battery 2 After pre-tested with the EUT, only the worst configuration (main sample) was chosen for the final test. 3. The EUT accessories list refers to EUT Photo.pdf. 4. The following antennas were provided to the EUT. Gain (dBi) No. Type Connector 2.4-2.4835GHz 5.15-5.25GHz 5.25-5.35GHz 5.47-5.725GHz 5.725-5.85GHz 0 PIFA NA -0.6 -2.2 -2.5 -3.6 -3.0 1 PIFA NA 0 -0.5 -0.5 -1.2 -2.2 Report No.: RF181001C06-6 Page No. 8 / 45 Report Format Version: 6.1.1

3.2 Description of Test Modes For 2.4GHz 13 channels are provided for 802.11b, 802.11g and 802.11n (HT20): Channel Frequency Channel Frequency 1 2412MHz 8 2447MHz 2 2417MHz 9 2452MHz 3 2422MHz 10 2457MHz 4 2427MHz 11 2462MHz 5 2432MHz 12 2467MHz 6 2437MHz 13 2472MHz 7 2442MHz For 5180 ~ 5240MHz: 4 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20): Channel Frequency Channel Frequency 36 5180 MHz 44 5220 MHz 40 5200 MHz 48 5240 MHz 2 channels are provided for 802.11n (HT40), 802.11ac (VHT40): Channel Frequency Channel Frequency 38 5190 MHz 46 5230 MHz 1 channel is provided for 802.11ac (VHT80): Channel Frequency 42 5210MHz For 5260 ~ 5320MHz: 4 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20): Channel Frequency Channel Frequency 52 5260 MHz 60 5300 MHz 56 5280 MHz 64 5320 MHz 2 channels are provided for 802.11n (HT40), 802.11ac (VHT40): Channel Frequency Channel Frequency 54 5270 MHz 62 5310 MHz 1 channel is provided for 802.11ac (VHT80): Channel Frequency 58 5290MHz Report No.: RF181001C06-6 Page No. 9 / 45 Report Format Version: 6.1.1

For 5500 ~ 5720MHz: 12 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20): Channel Frequency Channel Frequency 100 5500 MHz 124 5620 MHz 104 5520 MHz 128 5640 MHz 108 5540 MHz 132 5660 MHz 112 5560 MHz 136 5680 MHz 116 5580 MHz 140 5700 MHz 120 5600 MHz 144 5720 MHz 6 channels are provided for 802.11n (HT40), 802.11ac (VHT40): Channel Frequency Channel Frequency 102 5510 MHz 126 5630 MHz 110 5550 MHz 134 5670 MHz 118 5590 MHz 142 5710 MHz 3 channels are provided for 802.11ac (VHT80): Channel Frequency Channel Frequency 106 5530 MHz 122 5610 MHz 138 5690 MHz For 5745 ~ 5825MHz: 5 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20): Channel Frequency Channel Frequency 149 5745MHz 161 5805MHz 153 5765MHz 165 5825MHz 157 5785MHz 2 channels are provided for 802.11n (HT40), 802.11ac (VHT40): Channel Frequency Channel Frequency 151 5755MHz 159 5795MHz 1 channel is provided for 802.11ac (VHT80): Channel Frequency 155 5775MHz Report No.: RF181001C06-6 Page No. 10 / 45 Report Format Version: 6.1.1

For Bluetooth EDR: 79 channels are provided to this EUT: Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) 0 2402 20 2422 40 2442 60 2462 1 2403 21 2423 41 2443 61 2463 2 2404 22 2424 42 2444 62 2464 3 2405 23 2425 43 2445 63 2465 4 2406 24 2426 44 2446 64 2466 5 2407 25 2427 45 2447 65 2467 6 2408 26 2428 46 2448 66 2468 7 2409 27 2429 47 2449 67 2469 8 2410 28 2430 48 2450 68 2470 9 2411 29 2431 49 2451 69 2471 10 2412 30 2432 50 2452 70 2472 11 2413 31 2433 51 2453 71 2473 12 2414 32 2434 52 2454 72 2474 13 2415 33 2435 53 2455 73 2475 14 2416 34 2436 54 2456 74 2476 15 2417 35 2437 55 2457 75 2477 16 2418 36 2438 56 2458 76 2478 17 2419 37 2439 57 2459 77 2479 18 2420 38 2440 58 2460 78 2480 19 2421 39 2441 59 2461 For Bluetooth LE: 40 channels are provided to this EUT: Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) 0 2402 10 2422 20 2442 30 2462 1 2404 11 2424 21 2444 31 2464 2 2406 12 2426 22 2446 32 2466 3 2408 13 2428 23 2448 33 2468 4 2410 14 2430 24 2450 34 2470 5 2412 15 2432 25 2452 35 2472 6 2414 16 2434 26 2454 36 2474 7 2416 17 2436 27 2456 37 2476 8 2418 18 2438 28 2458 38 2478 9 2420 19 2440 29 2460 39 2480 Report No.: RF181001C06-6 Page No. 11 / 45 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail EUT Configure Applicable to Description Mode RE1G RE<1G OB - √ √ √ - Where RE1G: Radiated Emission above 1GHz & Bandedge RE<1G: Radiated Emission below 1GHz Measurement OB: Conducted Out-Band Emission Measurement Note: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on X-plane. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Modulation Configure Mode Freq. Range (MHz) Available Channel Tested Channel Technology Mode 2412 ~ 2472 1 to 13 DSSS 802.11b (SISO Ant. 0) + 5180 ~ 5240 38 to 46 OFDM - 802.11ac (VHT20) 5260 ~ 5320 52 to 64 6 + 100 OFDM (SISO Ant. 1) 5500 ~ 5720 100 to 144 OFDM 5745 ~ 5825 149 to 165 OFDM BT GFSK (Ant. 0) + 2402 ~ 2480 0 to 78 FHSS - 39 + 6 802.11b (SISO Ant. 1) 2412 ~ 2472 1 to 13 DSSS 2402 ~ 2480 0 to 78 FHSS BT GFSK (Ant. 0) 5180 ~ 5240 38 to 46 OFDM - + 802.11ac (VHT20) 5260 ~ 5320 52 to 64 39 + 36 OFDM (MIMO Ant. 0+1) 5500 ~ 5720 100 to 144 OFDM 5745 ~ 5825 149 to 165 OFDM Report No.: RF181001C06-6 Page No. 12 / 45 Report Format Version: 6.1.1

Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Modulation Configure Mode Freq. Range (MHz) Available Channel Tested Channel Technology Mode 2412 ~ 2472 1 to 13 DSSS 802.11b (SISO Ant. 0) + 5180 ~ 5240 38 to 46 OFDM - 802.11ac (VHT20) 5260 ~ 5320 52 to 64 6 + 100 OFDM (SISO Ant. 1) 5500 ~ 5720 100 to 144 OFDM 5745 ~ 5825 149 to 165 OFDM BT GFSK (Ant. 0) + 2402 ~ 2480 0 to 78 FHSS - 39 + 6 802.11b (SISO Ant. 1) 2412 ~ 2472 1 to 13 DSSS 2402 ~ 2480 0 to 78 FHSS BT GFSK (Ant. 0) 5180 ~ 5240 38 to 46 OFDM - + 802.11ac (VHT20) 5260 ~ 5320 52 to 64 39 + 36 OFDM (MIMO Ant. 0+1) 5500 ~ 5720 100 to 144 OFDM 5745 ~ 5825 149 to 165 OFDM Conducted Out-Band Emission Measurement Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Modulation Configure Mode Freq. Range (MHz) Available Channel Tested Channel Technology Mode 2402 ~ 2480 0 to 78 FHSS BT GFSK (Ant. 0) 5180 ~ 5240 38 to 46 OFDM - + 802.11ac (VHT20) 5260 ~ 5320 52 to 64 39 + 36 OFDM (MIMO Ant. 0+1) 5500 ~ 5720 100 to 144 OFDM 5745 ~ 5825 149 to 165 OFDM Test Condition: Applicable to Environmental Conditions Input Power Tested by RE1G 22 deg. C, 69% RH 120Vac, 60Hz Rey Chen RE<1G 23 deg. C, 68% RH 120Vac, 60Hz Weiwei Lo OB 25 deg. C, 75% RH 120Vac, 60Hz Weiwei Lo Report No.: RF181001C06-6 Page No. 13 / 45 Report Format Version: 6.1.1

3.3 Description of Support Units The EUT has been tested as an independent unit. 3.3.1 Configuration of System under Test Earphone (EUT) EUT Adapter (EUT) 3.4 General Description of Applied Standards The EUT is a RF Product. According to the specification of the EUT declared by the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) FCC Part 15, Subpart E (15.407) ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF181001C06-6 Page No. 14 / 45 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 30dB below the highest level of the desired power: Frequencies (MHz) Field Strength (microvolts/meter) Measurement Distance (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 Note: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Limits of unwanted emission out of the restricted bands Applicable To Limit 789033 D02 General UNII Test Procedure Field Strength at 3m New Rules v02r01 PK: 74 (dBµV/m) AV: 54 (dBµV/m) Equivalent Field Strength at Frequency Band Applicable To EIRP Limit 3m 5150~5250 MHz 15.407(b)(1) 5250~5350 MHz 15.407(b)(2) PK: -27 (dBm/MHz) PK: 68.2(dBµV/m) 5470~5725 MHz 15.407(b)(3) PK: -27 (dBm/MHz) *1 PK: 68.2(dBµV/m) *1 *2 PK: 10 (dBm/MHz) PK: 105.2 (dBµV/m) *2 15.407(b)(4)(i) *3 5725~5850 MHz PK: 15.6 (dBm/MHz) PK: 110.8(dBµV/m) *3 *4 PK: 27 (dBm/MHz) PK: 122.2 (dBµV/m) *4 15.407(b)(4)(ii) Emission limits in section 15.247(d) *2 *1 below the band edge increasing linearly to 10 beyond 75 MHz or more above of the band edge. dBm/MHz at 25 MHz above. *3 below the band edge increasing linearly to a level *4 from 5 MHz above or below the band edge of 15.6 dBm/MHz at 5 MHz above. increasing linearly to a level of 27 dBm/MHz at the band edge. Note: The following formula is used to convert the equipment isotropic radiated power (eirp) to field strength: 1000000 30P E= µV/m, where P is the eirp (Watts). 3 Report No.: RF181001C06-6 Page No. 15 / 45 Report Format Version: 6.1.1

4.1.2 Test Instruments Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due Test Receiver N9038A MY50010156 July 12, 2018 July 11, 2019 Agilent Pre-Amplifier EMCI EMC001340 980142 Feb. 09, 2018 Feb. 08, 2019 (Below 30MHz) Loop Antenna(*) Electro-Metrics EM-6879 264 Dec. 16, 2016 Dec. 15, 2018 (Below 30MHz) RF Cable (Below 30MHz) NA LOOPCAB-001 Jan. 15, 2018 Jan. 14, 2019 RF Cable (Below 30MHz) NA LOOPCAB-002 Jan. 15, 2018 Jan. 14, 2019 Pre-Amplifier Mini-Circuits ZFL-1000VH2B AMP-ZFL-05 May 05, 2018 May 04, 2019 (30MHz~1GHz) Trilog Broadband Antenna SCHWARZBECK VULB 9168 9168-361 Jan. 15, 2018 Jan. 14, 2019 (30MHz~1GHz) RF Cable (30MHz~1GHz) 8D 966-3-1 Mar. 20, 2018 Mar. 19, 2019 RF Cable (30MHz~1GHz) 8D 966-3-2 Mar. 20, 2018 Mar. 19, 2019 RF Cable (30MHz~1GHz) 8D 966-3-3 Mar. 20, 2018 Mar. 19, 2019 Fixed attenuator Mini-Circuits UNAT-5+ PAD-3m-3-01 Sep. 27, 2018 Sep. 26, 2019 (30MHz~1GHz) Horn_Antenna SCHWARZBECK BBHA9120-D 9120D-406 Jan. 15, 2018 Jan. 14, 2019 (1GHz~18GHz) Pre-Amplifier EMCI EMC12630SE 980384 Jan. 29, 2018 Jan. 28, 2019 (1GHz~18GHz) RF Cable (1GHz~18GHz) EMC104-SM-SM-1200 160922 Jan. 29, 2018 Jan. 28, 2019 RF Cable (1GHz~18GHz) EMC104-SM-SM-2000 150317 Jan. 29, 2018 Jan. 28, 2019 RF Cable (1GHz~18GHz) EMC104-SM-SM-5000 150322 Jan. 29, 2018 Jan. 28, 2019 Spectrum Analyzer Keysight N9030A MY54490679 July 23, 2018 July 22, 2019 (18GHz~40GHz) Pre-Amplifier EMC184045SE 980386 Jan. 29, 2018 Jan. 28, 2019 EMCI (18GHz~40GHz) Horn_Antenna SCHWARZBECK BBHA 9170 BBHA9170519 Jan. 15, 2018 Jan. 14, 2019 (18GHz~40GHz) RF Cable (18GHz~40GHz) EMC102-KM-KM-1200 160924 Jan. 29, 2018 Jan. 28, 2019 Software ADT_Radiated_V8.7.08 NA NA NA Antenna Tower & Turn Table MF-7802 MF780208406 NA NA Max-Full Boresight Antenna Fixture FBA-01 FBA-SIP01 NA NA (1GHz~18GHz) Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. *The calibration interval of the above test instruments is 24 months and the calibrations are traceable to NML/ROC and NIST/USA. 3. The test was performed in 966 Chamber No. 3. 4. The CANADA Site Registration No. is 20331-1 Report No.: RF181001C06-6 Page No. 16 / 45 Report Format Version: 6.1.1

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF181001C06-6 Page No. 17 / 45 Report Format Version: 6.1.1

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF181001C06-6 Page No. 18 / 45 Report Format Version: 6.1.1

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF181001C06-6 Page No. 19 / 45 Report Format Version: 6.1.1

4.1.7 Test Results for Fundamental and Harmonic above 1GHz 802.11b (SISO Ant. 0) + 802.11ac (VHT20) (SISO Ant. 1) DETECTOR Peak (PK) CHANNEL CH 6 + CH 100 FUNCTION Average (AV) FREQUENCY RANGE 1GHz ~ 40GHz ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2437.00 113.3 PK 3.01 H 181 116.3 -3.0 2 *2437.00 111.1 AV 3.01 H 181 114.1 -3.0 3 4874.00 49.2 PK 74.0 -24.8 1.42 H 197 47.6 1.6 4 4874.00 45.1 AV 54.0 -8.9 1.42 H 197 43.5 1.6 5 *5500.00 107.4 PK 1.15 H 278 104.9 2.5 6 *5500.00 97.6 AV 1.15 H 278 95.1 2.5 7 7311.00 50.8 PK 74.0 -23.2 1.52 H 204 43.1 7.7 8 7311.00 38.1 AV 54.0 -15.9 1.52 H 204 30.4 7.7 9 11000.00 53.0 PK 74.0 -21.0 1.68 H 171 40.8 12.2 10 11000.00 40.3 AV 54.0 -13.7 1.68 H 171 28.1 12.2 11 #16500.00 56.4 PK 68.2 -11.8 1.79 H 188 42.7 13.7 12 17996.60 64.3 PK 74.0 -9.7 1.34 H 79 42.4 21.9 13 17996.60 50.3 AV 54.0 -3.7 1.34 H 79 28.4 21.9 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF181001C06-6 Page No. 20 / 45 Report Format Version: 6.1.1

DETECTOR Peak (PK) CHANNEL CH 6 + CH 100 FUNCTION Average (AV) FREQUENCY RANGE 1GHz ~ 40GHz ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2437.00 102.9 PK 2.53 V 267 105.9 -3.0 2 *2437.00 100.8 AV 2.53 V 267 103.8 -3.0 3 4874.00 47.5 PK 74.0 -26.5 3.01 V 168 45.9 1.6 4 4874.00 34.8 AV 54.0 -19.2 3.01 V 168 33.2 1.6 5 *5500.00 106.8 PK 1.15 V 278 104.3 2.5 6 *5500.00 97.1 AV 1.15 V 278 94.6 2.5 7 7311.00 50.7 PK 74.0 -23.3 1.73 V 112 43.0 7.7 8 7311.00 38.0 AV 54.0 -16.0 1.73 V 112 30.3 7.7 9 11000.00 53.9 PK 74.0 -20.1 1.69 V 316 41.7 12.2 10 11000.00 41.2 AV 54.0 -12.8 1.69 V 316 29.0 12.2 11 #16500.00 56.1 PK 68.2 -12.1 1.97 V 164 42.4 13.7 12 17975.35 62.8 PK 74.0 -11.2 1.45 V 177 41.3 21.5 13 17975.35 50.1 AV 54.0 -3.9 1.45 V 177 28.6 21.5 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF181001C06-6 Page No. 21 / 45 Report Format Version: 6.1.1

BT GFSK (Ant. 0) + 802.11b (SISO Ant. 1) DETECTOR Peak (PK) CHANNEL CH 39 + CH 6 FUNCTION Average (AV) FREQUENCY RANGE 1GHz ~ 40GHz ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2437.00 113.2 PK 2.51 H 251 116.2 -3.0 2 *2437.00 110.8 AV 2.51 H 251 113.8 -3.0 3 *2441.00 109.0 PK 1.51 H 175 112.0 -3.0 4 *2441.00 108.1 AV 1.51 H 175 111.1 -3.0 5 4874.00 49.9 PK 74.0 -24.1 1.11 H 166 48.3 1.6 6 4874.00 37.4 AV 54.0 -16.6 1.11 H 166 35.8 1.6 7 4882.00 47.5 PK 74.0 -26.5 1.46 H 197 45.8 1.7 8 4882.00 40.2 AV 54.0 -13.8 1.46 H 197 38.5 1.7 9 7311.00 50.4 PK 74.0 -23.6 1.73 H 154 42.7 7.7 10 7311.00 38.8 AV 54.0 -15.2 1.73 H 154 31.1 7.7 11 7323.00 52.6 PK 74.0 -21.4 1.46 H 197 44.8 7.8 12 7323.00 40.8 AV 54.0 -13.2 1.46 H 197 33.0 7.8 13 17977.05 63.1 PK 74.0 -10.9 1.19 H 196 41.6 21.5 14 17977.05 50.2 AV 54.0 -3.8 1.19 H 196 28.7 21.5 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF181001C06-6 Page No. 22 / 45 Report Format Version: 6.1.1

DETECTOR Peak (PK) CHANNEL CH 39 + CH 6 FUNCTION Average (AV) FREQUENCY RANGE 1GHz ~ 40GHz ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2437.00 102.5 PK 2.51 V 186 105.5 -3.0 2 *2437.00 100.3 AV 2.51 V 186 103.3 -3.0 3 *2441.00 94.9 PK 1.54 V 339 97.9 -3.0 4 *2441.00 93.8 AV 1.54 V 339 96.8 -3.0 5 4874.00 49.7 PK 74.0 -24.3 1.16 V 165 48.1 1.6 6 4874.00 37.0 AV 54.0 -17.0 1.16 V 165 35.4 1.6 7 4882.00 45.9 PK 74.0 -28.1 1.59 V 332 44.2 1.7 8 4882.00 36.8 AV 54.0 -17.2 1.59 V 332 35.1 1.7 9 7311.00 50.1 PK 74.0 -23.9 1.68 V 155 42.4 7.7 10 7311.00 38.4 AV 54.0 -15.6 1.68 V 155 30.7 7.7 11 7323.00 52.3 PK 74.0 -21.7 2.05 V 188 44.5 7.8 12 7323.00 42.0 AV 54.0 -12.0 2.05 V 188 34.2 7.8 13 17993.20 62.8 PK 74.0 -11.2 1.46 V 158 41.0 21.8 14 17993.20 49.9 AV 54.0 -4.1 1.46 V 158 28.1 21.8 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF181001C06-6 Page No. 23 / 45 Report Format Version: 6.1.1

BT GFSK (Ant. 0) + 802.11ac (VHT20) (MIMO Ant. 0+1) DETECTOR Peak (PK) CHANNEL CH 39 + CH 36 FUNCTION Average (AV) FREQUENCY RANGE 1GHz ~ 40GHz ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2441.00 106.5 PK 3.02 H 178 109.5 -3.0 2 *2441.00 106.0 AV 3.02 H 178 109.0 -3.0 3 4584.00 45.9 PK 74.0 -28.1 1.69 H 217 44.7 1.2 4 4584.00 38.5 AV 54.0 -15.5 1.69 H 217 37.3 1.2 5 4882.00 54.1 PK 74.0 -19.9 1.19 H 185 52.4 1.7 6 4882.00 50.7 AV 54.0 -3.3 1.19 H 185 49.0 1.7 7 *5180.00 112.2 PK 1.10 H 341 109.7 2.5 8 *5180.00 102.0 AV 1.10 H 341 99.5 2.5 9 7323.00 50.3 PK 74.0 -23.7 1.48 H 211 42.5 7.8 10 7323.00 38.7 AV 54.0 -15.3 1.48 H 211 30.9 7.8 11 #10360.00 54.0 PK 68.2 -14.2 1.71 H 158 42.1 11.9 12 15540.00 55.5 PK 74.0 -18.5 1.85 H 201 43.1 12.4 13 15540.00 42.6 AV 54.0 -11.4 1.85 H 201 30.2 12.4 14 17954.95 62.8 PK 74.0 -11.2 1.27 H 69 41.7 21.1 15 17954.95 50.3 AV 54.0 -3.7 1.27 H 69 29.2 21.1 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF181001C06-6 Page No. 24 / 45 Report Format Version: 6.1.1

DETECTOR Peak (PK) CHANNEL CH 39 + CH 36 FUNCTION Average (AV) FREQUENCY RANGE 1GHz ~ 40GHz ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2441.00 97.1 PK 2.82 V 273 100.1 -3.0 2 *2441.00 96.7 AV 2.82 V 273 99.7 -3.0 3 4584.00 48.6 PK 74.0 -25.4 2.85 V 168 47.4 1.2 4 4584.00 43.2 AV 54.0 -10.8 2.85 V 168 42.0 1.2 5 4882.00 54.0 PK 74.0 -20.0 2.96 V 173 52.3 1.7 6 4882.00 50.5 AV 54.0 -3.5 2.96 V 173 48.8 1.7 7 *5180.00 111.7 PK 2.29 V 171 109.2 2.5 8 *5180.00 101.7 AV 2.29 V 171 99.2 2.5 9 7323.00 51.5 PK 74.0 -22.5 1.67 V 108 43.7 7.8 10 7323.00 38.8 AV 54.0 -15.2 1.67 V 108 31.0 7.8 11 #10360.00 53.5 PK 68.2 -14.7 1.65 V 331 41.6 11.9 12 15540.00 55.3 PK 74.0 -18.7 2.01 V 149 42.9 12.4 13 15540.00 42.5 AV 54.0 -11.5 2.01 V 149 30.1 12.4 14 17985.55 63.8 PK 74.0 -10.2 1.49 V 268 42.2 21.6 15 17985.55 50.1 AV 54.0 -3.9 1.49 V 268 28.5 21.6 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF181001C06-6 Page No. 25 / 45 Report Format Version: 6.1.1

4.1.8 Test Results for Bandedge above 1GHz 802.11b (SISO Ant. 0) + 802.11ac (VHT20) (SISO Ant. 1) DETECTOR Peak (PK) CHANNEL CH 6 FUNCTION Average (AV) FREQUENCY RANGE 2310MHz ~ 2500MHz ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) PK.1 2389.59 53.1 PK 74.0 -20.9 3.01 H 181 55.8 -2.7 PK.2 2489.93 50.9 PK 74.0 -23.1 3.01 H 181 53.8 -2.9 AV.1 2389.94 43.0 AV 54.0 -11.0 3.01 H 181 45.7 -2.7 AV.2 2485.46 39.2 AV 54.0 -14.8 3.01 H 181 42.1 -2.9 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " # ": The radiated frequency is out of the restricted band. Peak Average Report No.: RF181001C06-6 Page No. 26 / 45 Report Format Version: 6.1.1

DETECTOR Peak (PK) CHANNEL CH 6 FUNCTION Average (AV) FREQUENCY RANGE 2310MHz ~ 2500MHz ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) PK.1 2386.86 51.5 PK 74.0 -22.5 2.53 V 267 54.2 -2.7 PK.2 2486.34 50.2 PK 74.0 -23.8 2.53 V 267 53.1 -2.9 AV.1 2389.26 39.4 AV 54.0 -14.6 2.53 V 267 42.1 -2.7 AV.2 2490.78 38.8 AV 54.0 -15.2 2.53 V 267 41.7 -2.9 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " # ": The radiated frequency is out of the restricted band. Peak Average Report No.: RF181001C06-6 Page No. 27 / 45 Report Format Version: 6.1.1

DETECTOR Peak (PK) CHANNEL CH 100 FUNCTION Average (AV) FREQUENCY RANGE 5350MHz ~ 5850MHz ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) PK.1 5459.51 55.5 PK 74.0 -18.5 1.15 H 278 52.8 2.7 PK.2 #5468.57 60.2 PK 68.2 -8.0 1.15 H 278 57.6 2.6 AV.1 5459.90 44.4 AV 54.0 -9.6 1.15 H 278 41.7 2.7 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " # ": The radiated frequency is out of the restricted band. Peak Average Report No.: RF181001C06-6 Page No. 28 / 45 Report Format Version: 6.1.1

DETECTOR Peak (PK) CHANNEL CH 100 FUNCTION Average (AV) FREQUENCY RANGE 5350MHz ~ 5850MHz ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) PK.1 5453.68 55.2 PK 74.0 -18.8 1.00 V 171 52.5 2.7 PK.2 #5470.00 60.4 PK 68.2 -7.8 2.29 V 171 57.8 2.6 AV.1 5459.90 44.0 AV 54.0 -10.0 2.52 V 170 41.3 2.7 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " # ": The radiated frequency is out of the restricted band. Peak Average Report No.: RF181001C06-6 Page No. 29 / 45 Report Format Version: 6.1.1

BT GFSK (Ant. 0) + 802.11b (SISO Ant. 1) DETECTOR Peak (PK) CHANNEL CH 39 + CH 6 FUNCTION Average (AV) FREQUENCY RANGE 2310MHz ~ 2500MHz ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) PK.1 2361.74 51.4 PK 74.0 -22.6 1.52 H 179 54.0 -2.6 PK.2 2491.00 53.3 PK 74.0 -20.7 1.52 H 179 56.2 -2.9 AV.1 2387.52 41.3 AV 54.0 -12.7 1.52 H 179 44.0 -2.7 AV.2 2485.75 40.9 AV 54.0 -13.1 1.52 H 179 43.8 -2.9 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Peak Average Report No.: RF181001C06-6 Page No. 30 / 45 Report Format Version: 6.1.1

DETECTOR Peak (PK) CHANNEL CH 39 + CH 6 FUNCTION Average (AV) FREQUENCY RANGE 2310MHz ~ 2500MHz ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) PK.1 2374.19 52.2 PK 74.0 -21.8 1.54 V 339 54.8 -2.6 PK.2 2495.03 51.2 PK 74.0 -22.8 1.54 V 339 54.1 -2.9 AV.1 2383.25 41.4 AV 54.0 -12.6 1.54 V 339 44.1 -2.7 AV.2 2491.39 41.0 AV 54.0 -13.0 1.54 V 339 43.9 -2.9 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Peak Average Report No.: RF181001C06-6 Page No. 31 / 45 Report Format Version: 6.1.1

BT GFSK (Ant. 0) + 802.11ac (VHT20) (MIMO Ant. 0+1) DETECTOR Peak (PK) CHANNEL CH 39 FUNCTION Average (AV) FREQUENCY RANGE 2310MHz ~ 2500MHz ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) PK.1 2380.52 51.6 PK 74.0 -22.4 3.02 H 178 54.2 -2.6 PK.2 2490.37 50.8 PK 74.0 -23.2 3.02 H 178 53.7 -2.9 AV.1 2380.78 41.2 AV 54.0 -12.8 3.02 H 178 43.9 -2.7 AV.2 2484.13 40.9 AV 54.0 -13.1 3.02 H 178 43.9 -3.0 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Peak Average Report No.: RF181001C06-6 Page No. 32 / 45 Report Format Version: 6.1.1

DETECTOR Peak (PK) CHANNEL CH 39 FUNCTION Average (AV) FREQUENCY RANGE 2310MHz ~ 2500MHz ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) PK.1 2364.95 50.5 PK 74.0 -23.5 2.82 V 273 53.1 -2.6 PK.2 2493.45 50.1 PK 74.0 -23.9 2.82 V 273 53.0 -2.9 AV.1 2384.44 41.4 AV 54.0 -12.6 2.82 V 273 44.1 -2.7 AV.2 2496.81 41.0 AV 54.0 -13.0 2.82 V 273 43.9 -2.9 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Peak Average Report No.: RF181001C06-6 Page No. 33 / 45 Report Format Version: 6.1.1

DETECTOR Peak (PK) CHANNEL CH 36 FUNCTION Average (AV) FREQUENCY RANGE 4500MHz ~ 5460MHz ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) PK.1 4882.00 54.1 PK 74.0 -19.9 1.19 H 185 52.4 1.7 PK.2 5150.00 59.3 PK 74.0 -14.7 1.10 H 341 56.7 2.6 AV.1 4882.00 50.7 AV 54.0 -3.3 1.19 H 185 49.0 1.7 AV.2 5150.00 47.4 AV 54.0 -6.6 1.10 H 341 44.8 2.6 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " # ": The radiated frequency is out of the restricted band. Peak Average Report No.: RF181001C06-6 Page No. 34 / 45 Report Format Version: 6.1.1

DETECTOR Peak (PK) CHANNEL CH 36 FUNCTION Average (AV) FREQUENCY RANGE 4500MHz ~ 5460MHz ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) PK.1 4882.00 54.0 PK 74.0 -20.0 2.64 V 173 52.3 1.7 PK.2 5150.00 64.9 PK 74.0 -9.1 2.29 V 171 62.3 2.6 AV.1 4882.00 50.5 AV 54.0 -3.5 2.64 V 173 48.8 1.7 AV.2 5150.00 52.4 AV 54.0 -1.6 2.29 V 171 49.8 2.6 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " # ": The radiated frequency is out of the restricted band. Peak Average Report No.: RF181001C06-6 Page No. 35 / 45 Report Format Version: 6.1.1

4.1.9 Test Results for below 1GHz 802.11b (SISO Ant. 0) + 802.11ac (VHT20) (SISO Ant. 1) CHANNEL CH 6 + CH 100 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 38.78 31.0 PK 40.0 -9.0 1.50 H 252 40.6 -9.6 2 150.57 29.6 PK 43.5 -13.9 2.00 H 121 37.6 -8.0 3 302.98 27.9 PK 46.0 -18.1 2.00 H 304 34.9 -7.0 4 595.83 32.5 PK 46.0 -13.5 1.50 H 149 32.5 0.0 5 760.80 33.6 PK 46.0 -12.4 2.00 H 183 30.6 3.0 6 943.09 35.6 PK 46.0 -10.4 2.00 H 32 30.2 5.4 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit of frequency range 30MHz ~ 1000MHz 4. Margin value = Emission Level – Limit value 5. The emission levels were very low against the limit of frequency range 9kHz ~ 30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report 6. The PK detector measurement value is much smaller than the limit QP value, so the pass is determined Report No.: RF181001C06-6 Page No. 36 / 45 Report Format Version: 6.1.1

CHANNEL CH 6 + CH 100 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 30.10 34.2 PK 40.0 -5.8 1.00 V 0 43.9 -9.7 2 150.09 29.1 PK 43.5 -14.4 2.00 V 4 37.1 -8.0 3 311.32 27.7 PK 46.0 -18.3 2.00 V 282 34.4 -6.7 4 493.90 29.5 PK 46.0 -16.5 2.00 V 145 31.8 -2.3 5 678.47 33.4 PK 46.0 -12.6 1.50 V 360 32.0 1.4 6 929.92 35.7 PK 46.0 -10.3 1.00 V 67 30.4 5.3 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit of frequency range 30MHz ~ 1000MHz 4. Margin value = Emission Level – Limit value 5. The emission levels were very low against the limit of frequency range 9kHz ~ 30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report 6. The PK detector measurement value is much smaller than the limit QP value, so the pass is determined Report No.: RF181001C06-6 Page No. 37 / 45 Report Format Version: 6.1.1

BT GFSK (Ant. 0) + 802.11b (SISO Ant. 1) CHANNEL CH 39 + CH 6 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 38.83 31.6 PK 40.0 -8.4 2.00 H 161 41.2 -9.6 2 152.32 28.8 PK 43.5 -14.7 1.50 H 1 36.9 -8.1 3 396.95 29.3 PK 46.0 -16.7 2.00 H 106 34.0 -4.7 4 579.84 30.7 PK 46.0 -15.3 1.00 H 246 31.2 -0.5 5 800.93 33.6 PK 46.0 -12.4 1.50 H 338 30.4 3.2 6 983.46 36.5 PK 54.0 -17.5 2.00 H 32 30.7 5.8 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit of frequency range 30MHz ~ 1000MHz 4. Margin value = Emission Level – Limit value 5. The emission levels were very low against the limit of frequency range 9kHz ~ 30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report 6. The PK detector measurement value is much smaller than the limit QP value, so the pass is determined Report No.: RF181001C06-6 Page No. 38 / 45 Report Format Version: 6.1.1

CHANNEL CH 39 + CH 6 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 30.00 33.7 PK 40.0 -6.3 1.50 V 360 43.3 -9.6 2 160.44 28.8 PK 43.5 -14.7 2.00 V 360 37.3 -8.5 3 313.19 26.9 PK 46.0 -19.1 1.50 V 360 33.5 -6.6 4 494.44 30.1 PK 46.0 -15.9 2.00 V 360 32.3 -2.2 5 644.30 32.9 PK 46.0 -13.1 1.50 V 37 31.9 1.0 6 833.50 34.5 PK 46.0 -11.5 2.00 V 188 30.5 4.0 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit of frequency range 30MHz ~ 1000MHz 4. Margin value = Emission Level – Limit value 5. The emission levels were very low against the limit of frequency range 9kHz ~ 30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report 6. The PK detector measurement value is much smaller than the limit QP value, so the pass is determined Report No.: RF181001C06-6 Page No. 39 / 45 Report Format Version: 6.1.1

BT GFSK (Ant. 0) + 802.11ac (VHT20) (MIMO Ant. 0+1) CHANNEL CH 39 + CH 36 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 30.02 31.9 PK 40.0 -8.1 1.00 H 33 41.6 -9.7 2 149.96 29.1 PK 43.5 -14.4 1.50 H 97 37.1 -8.0 3 327.79 28.3 PK 46.0 -17.7 2.00 H 270 34.6 -6.3 4 583.36 31.7 PK 46.0 -14.3 1.50 H 142 32.1 -0.4 5 695.42 33.0 PK 46.0 -13.0 1.00 H 17 31.3 1.7 6 906.13 35.6 PK 46.0 -10.4 1.50 H 237 30.7 4.9 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit of frequency range 30MHz ~ 1000MHz 4. Margin value = Emission Level – Limit value 5. The emission levels were very low against the limit of frequency range 9kHz ~ 30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report 6. The PK detector measurement value is much smaller than the limit QP value, so the pass is determined Report No.: RF181001C06-6 Page No. 40 / 45 Report Format Version: 6.1.1

CHANNEL CH 39 + CH 36 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 30.05 34.2 PK 40.0 -5.8 1.00 V 78 43.9 -9.7 2 150.11 29.8 PK 43.5 -13.7 1.50 V 0 37.8 -8.0 3 391.40 28.8 PK 46.0 -17.2 1.00 V 231 33.6 -4.8 4 645.47 32.9 PK 46.0 -13.1 1.00 V 360 31.9 1.0 5 865.49 34.6 PK 46.0 -11.4 1.50 V 110 30.3 4.3 6 956.50 36.1 PK 46.0 -9.9 1.50 V 54 30.7 5.4 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit of frequency range 30MHz ~ 1000MHz 4. Margin value = Emission Level – Limit value 5. The emission levels were very low against the limit of frequency range 9kHz ~ 30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report 6. The PK detector measurement value is much smaller than the limit QP value, so the pass is determined Report No.: RF181001C06-6 Page No. 41 / 45 Report Format Version: 6.1.1

4.2 Conducted Out of Band Emission Measurement 4.2.1 Limits of Conducted Out of Band Emission Measurement Below 20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.2.2 Test Setup SPECTRUM EUT Attenuator ANALYZER 4.2.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.2.4 Test Procedure MEASUREMENT PROCEDURE REF a. Set the RBW = 100 kHz. b. Set the VBW ≥ 300 kHz. c. Detector = average. d. Sweep time = auto couple. e. Trace mode = max hold. f. Allow trace to fully stabilize. g. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE a. Set RBW = 100 kHz. b. Set VBW ≥ 300 kHz. c. Detector = average. d. Sweep = auto couple. e. Trace Mode = max hold. f. Allow trace to fully stabilize. g. Use the peak marker function to determine the maximum amplitude level. 4.2.5 Deviation from Test Standard No deviation. 4.2.6 EUT Operating Condition The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF181001C06-6 Page No. 42 / 45 Report Format Version: 6.1.1

4.2.7 Test Results The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. Report No.: RF181001C06-6 Page No. 43 / 45 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF181001C06-6 Page No. 44 / 45 Report Format Version: 6.1.1

Appendix – Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF181001C06-6 Page No. 45 / 45 Report Format Version: 6.1.1


Document Created: 2019-03-21 11:29:40
Document Modified: 2019-03-21 11:29:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC