Test Report_20190116_v1 - Test Report (HAC-TCoil) rev

FCC ID: A4RG020A

Test Report

Download: PDF
FCCID_4154092

FCC HAC (T-Coil) Test Report FCC HAC (T-Coil) Test Report Report No. : HC181001C06-1 Applicant : Google LLC Address : 1600 Amphitheatre Parkway, Mountain View, CA 94043, USA Product : Smartphone FCC ID : A4RG020A Model Name : G020A Standards : FCC 47 CFR Part 20.19, ANSI C63.19-2011 KDB 285076 D01 v05, KDB 285076 D02 v03, KDB 285076 D03 v01 Sample Received Date : Oct. 01, 2018 Date of Testing : Oct. 12, 2018 ~ Dec. 12, 2018 Summary T-Rating : T3 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location : No. 19, Hwa Ya 2nd Rd, Wen Hwa Vil, Kwei Shan Dist., Taoyuan City 33383, Taiwan (R.O.C) CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s HAC characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Ivonne Wu / Supervisor Approved By : Roy Wu / Senior Manager FCC Accredited No.: TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report Format Version 5.0.0 Page No. : 1 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of T-Rating ............................................................................................................................................................ 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. HAC T-Coil Measurement System ........................................................................................................................................ 7 3.1 SPEAG DASY System ................................................................................................................................................. 7 3.1.1 Robot.................................................................................................................................................................. 8 3.1.2 AM1D Probe....................................................................................................................................................... 8 3.1.3 Audio Magnetic Calibration Coil (AMCC) ........................................................................................................... 9 3.1.4 Audio Magnetic Measuring Instrument (AMMI) .................................................................................................. 9 3.1.5 Data Acquisition Electronics (DAE) .................................................................................................................... 9 3.1.6 Phantoms ......................................................................................................................................................... 10 3.1.7 Device Holder................................................................................................................................................... 10 3.2 System Calibration ..................................................................................................................................................... 11 3.3 EUT Measurements Reference and Plane ................................................................................................................. 12 3.4 HAC T-Coil Measurement Procedure ......................................................................................................................... 13 3.5 Test System Setup and Audio Input Level .................................................................................................................. 15 4. HAC Measurement Evaluation ............................................................................................................................................ 18 4.1 Measurement Criteria................................................................................................................................................. 18 4.1.1 Field Intensity ................................................................................................................................................... 18 4.1.2 Frequency Response ....................................................................................................................................... 18 4.1.3 Signal Quality ................................................................................................................................................... 19 4.2 EUT Configuration and Setting................................................................................................................................... 19 4.3 HAC T-Coil Testing Results ........................................................................................................................................ 19 4.3.1 GSM CMRS Voice Testing Results................................................................................................................... 19 4.3.2 WCDMA CMRS Voice Testing Results ............................................................................................................. 20 4.3.3 CDMA CMRS Voice Testing Results ................................................................................................................ 20 4.3.4 VoLTE Testing Results ..................................................................................................................................... 21 4.3.5 VoWiFi Testing Results..................................................................................................................................... 24 4.3.6 OTT Voice Calling Testing Results ................................................................................................................... 25 5. Calibration of Test Equipment ............................................................................................................................................ 28 6. Measurement Uncertainty ................................................................................................................................................... 29 7. Information on the Testing Laboratories ........................................................................................................................... 30 Appendix A. Plots of HAC T-Coil Measurement Appendix B. Calibration Certificate for Probe Appendix C. Photographs of EUT and Setup Report Format Version 5.0.0 Page No. : 2 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report Release Control Record Report No. Reason for Change Date Issued HC181001C06-1 Initial release Dec. 27, 2018 Report Format Version 5.0.0 Page No. : 3 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report 1. Summary of T-Rating OTT Voice CMRS Voice VoLTE VoWiFi Mode Band Calling T-Rating T-Rating T-Rating T-Rating GSM850 T3 T4 GSM N/A N/A GSM1900 T3 T4 Band II T4 T4 WCDMA Band IV T4 N/A N/A T4 Band V T4 T4 BC0 T4 T4 CDMA BC1 T3 N/A N/A T4 BC10 T3 T4 Band 2 T4 Band 4 T4 Band 5 T4 Band 7 T4 Band 12 T4 FDD-LTE N/A N/A T4 Band 13 T4 Band 17 T4 Band 25 T4 Band 26 T4 Band 66 T4 Band 38 T4 TDD-LTE N/A N/A T4 Band 41 T4 2.4G T3 T4 5.2G T4 WLAN 5.3G N/A N/A T4 T4 5.6G T4 5.8G T4 Summary T3 Note: 1. The HAC T-Coil limit (T-Rating Category T3) is specified in FCC 47 CFR part 20.19 and ANSI C63.19. 2. The device T-Coil rating is determined by the minimum rating. Report Format Version 5.0.0 Page No. : 4 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report 2. Description of Equipment Under Test EUT Type Smartphone FCC ID A4RG020A Model Name G020A EUT 1 : EUT + Battery 1 EUT Configurations EUT 2 : EUT + Battery 2 GSM GSM850 : 824.2 ~ 848.8 GSM1900 : 1850.2 ~ 1909.8 WCDMA Band II : 1852.4 ~ 1907.6 Band IV : 1712.4 ~ 1752.6 Band V : 826.4 ~ 846.6 CDMA BC0 : 824.7 ~ 848.31 BC1 : 1851.25 ~ 1908.75 BC10 : 817.9 ~ 823.1 FDD-LTE Band 2 : 1850.7 ~ 1909.3 (BW: 1.4M, 3M, 5M, 10M, 15M, 20M) Band 4 : 1710.7 ~ 1754.3 (BW: 1.4M, 3M, 5M, 10M, 15M, 20M) Tx Frequency Bands Band 5 : 824.7 ~ 848.3 (BW: 1.4M, 3M, 5M, 10M) (Unit: MHz) Band 7 : 2502.5 ~ 2567.5 (BW: 5M, 10M, 15M, 20M) Band 12 : 699.7 ~ 715.3 (BW: 1.4M, 3M, 5M, 10M) Band 13 : 779.5 ~ 784.5 (BW: 5M, 10M) Band 17 : 706.5 ~ 713.5 (BW: 5M, 10M) Band 25 : 1850.7 ~ 1914.3 (BW: 1.4M, 3M, 5M, 10M, 15M, 20M) Band 26 : 814.7 ~ 848.3 (BW: 1.4M, 3M, 5M, 10M, 15M) Band 66 : 1710.7 ~ 1779.3 (BW: 1.4M, 3M, 5M, 10M, 15M, 20M) TDD-LTE LTE Band 38 : 2572.5 ~ 2617.5 (BW: 5M, 10M, 15M, 20M) LTE Band 41 : 2498.5 ~ 2687.5 (BW: 5M, 10M, 15M, 20M) WLAN 2412 ~ 2472, 5180 ~ 5240, 5260 ~ 5320, 5500 ~ 5720, 5745 ~ 5825 Bluetooth 2402 ~ 2480 GSM & GPRS : GMSK EDGE : 8PSK WCDMA : QPSK CDMA : QPSK Modulations Supported in Uplink LTE : QPSK, 16QAM, 64QAM 802.11b : DSSS 802.11a/g/n/ac : OFDM Bluetooth : GFSK, π/4-DQPSK, 8-DPSK Antenna Type PIFA Antenna EUT Stage Identical Prototype Note: 1. The above EUT information is declared by manufacturer and for more detailed features description please refers to the manufacturer's specifications or User's Manual. Report Format Version 5.0.0 Page No. : 5 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report Air Interface and Operational Mode: Air Transport ANSI C63.19 Simultaneous Name of Power Bands Interface Type Tested But Not Tested Voice Service Reduction 850 No VO YES WLAN, BT CMRS Voice(1) GSM 1900 No EGPRS VD YES WLAN, BT Google Duo(2) No II No IV VO YES WLAN, BT CMRS Voice(1) No WCDMA V No HSPA VD YES WLAN, BT Google Duo(2) No BC0 No BC1 VO YES WLAN, BT CMRS Voice(1) No CDMA BC10 No EVDO VD YES WLAN, BT Google Duo(2) No 2 No 4 No 5 No 7 No 12 VoLTE(1) No FDD-LTE VD YES WLAN, BT 13 Google Duo(2) No 17 No 25 No 26 No 66 No 38 VoLTE(1) No TDD-LTE VD YES WLAN, BT 41 Google Duo(2) No 2.4G VD YES No 5.2G No VoWiFi(2) WLAN 5.3G WWAN, BT No VD YES Google Duo(2) 5.6G No 5.8G No Bluetooth 2.4G DT No WWAN, WLAN N/A No Transport Type Note VO = Legacy Cellular Voice Service 1. Reference level in accordance with 7.4.2.1 of ANSI C63.19-2011 and the July 2012 VoLTE DT = Digital Transport Only (No Voice) interpretation. VD = IP Voice Service over Digital Transport 2. Reference level is −20 dBm0 in accordance with FCC KDB 285076 3. The device supported a pre-installed application, Google Duo, whose features allow the option of voice-only communications. 4. Because features of Google Duo allow the option of voice-only communications, Duo has been tested for HAC/T-Coil compatibility to ensure the best user experience. Report Format Version 5.0.0 Page No. : 6 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report 3. HAC T-Coil Measurement System 3.1 SPEAG DASY System DASY system consists of high precision robot, probe alignment sensor, phantom, robot controller, controlled measurement server and near-field probe. The robot includes six axes that can move to the precision position of the DASY5 software defined. The DASY software can define the area that is detected by the probe. The robot is connected to controlled box. Controlled measurement server is connected to the controlled robot box. The DAE includes amplifier, signal multiplexing, AD converter, offset measurement and surface detection. It is connected to the Electro-optical coupler (ECO). The ECO performs the conversion form the optical into digital electric signal of the DAE and transfers data to the PC. Fig-3.1 DASY System Setup Report Format Version 5.0.0 Page No. : 7 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report 3.1.1 Robot The DASY system uses the high precision robots from Stäubli SA (France). For the 6-axis controller system, the robot controller version (DASY5: CS8c) from Stäubli is used. The Stäubli robot series have many features that are important for our application: ‧ High precision (repeatability ±0.035 mm) ‧ High reliability (industrial design) ‧ Jerk-free straight movements ‧ Low ELF interference (the closed metallic construction shields against motor control fields) Fig-3.3 DASY5 Measurement System 3.1.2 AM1D Probe The AM1D probe is an active probe with a single sensor. It is fully RF-shielded and has a rounded tip 6 mm in diameter incorporating a pickup coil with its center offset 3 mm from the tip and the sides. The symmetric signal preamplifier in the probe is fed via the shielded symmetric output cable from the AMMI with a 48V “phantom” voltage supply. The 7-pin connector on the back in the axis of the probe does not carry any signals. It is mounted to the DAE for the correct orientation of the sensor. If the probe axis is tilted 54.7 degrees from the vertical, the sensor is approximately vertical when the signal connector is at the underside of the probe (cable hanging downwards). Model AM1DV3 0.1 kHz to 20 kHz Sampling Rate RF sensitivity < -100 dB Preamplifier Symmetric, 40 dB Dynamic Range -60 to 40 dB A/m Calibration at 1kHz Tip diameter : 6 mm Dimensions Length : 290 mm Report Format Version 5.0.0 Page No. : 8 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report 3.1.3 Audio Magnetic Calibration Coil (AMCC) The AMCC is a Helmholtz Coil designed for calibration of the AM1D probe. The two horizontal coils generate a homogeneous magnetic field in the z direction. The DC input resistance is adjusted by a series resistor to approximately 50 Ohm, and a shunt resistor of 10 Ohm permits monitoring the current with a scale of 1:10. Signal Connector Resistance Coil In BNC Typically 50 Ohm 10 Ohm ±1% Coil Monitor BNO (100mV corresponding to 1 A/m) Dimensions 370 x 370 x 196 mm 3.1.4 Audio Magnetic Measuring Instrument (AMMI) The AMMI is a desktop 19-inch unit containing a sampling unit, a waveform generator for test and calibration signals, and a USB interface. Sampling Rate 48 kHz / 24 bit Dynamic Range 100 dB (with AM1DV3 probe) Test Signal User selectable and predefined (via PC) Generation Auto-calibration / full system calibration using AMCC with monitor Calibration output Dimensions 482 x 65 x 270 mm 3.1.5 Data Acquisition Electronics (DAE) Model DAE3, DAE4 Signal amplifier, multiplexer, A/D converter and control logic. Serial optical link for communication with DASY embedded Construction system (fully remote controlled). Two step probe touch detector for mechanical surface detection and emergency robot stop. Measurement -100 to +300 mV (16 bit resolution and two range settings: 4mV, Range 400mV) Input Offset < 5µV (with auto zero) Voltage Input Bias Current < 50 fA Dimensions 60 x 60 x 68 mm Report Format Version 5.0.0 Page No. : 9 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report 3.1.6 Phantoms Model Test Arch Enables easy and well defined positioning of the phone and Construction validation dipoles as well as simple teaching of the robot. Length : 370 mm Dimensions Width : 370 mm Height : 370 mm 3.1.7 Device Holder Model Mounting Device The Mounting Device enables the rotation of the mounted transmitter device in spherical coordinates. Rotation point is the Construction ear opening point. Transmitter devices can be easily and accurately positioned according to ANSI C63.19. Material POM Report Format Version 5.0.0 Page No. : 10 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report 3.2 System Calibration For correct and calibrated measurement of the voltages and ABM field, DASY will perform a calibration job as below. In phase 1, the audio output is switched off, and a 200 mVpp symmetric rectangular signal of 1 kHz is generated and internally connected directly to both channels of the sampling unit (Coil in, Probe in). In phase 2, the audio output is off, and a 20 mVpp symmetric 100 Hz signal is internally connected. The signals during phases 1 and 2 are available at the output on the rear panel of the AMMI. However, the output must not be loaded, in order to avoid influencing the calibration. An RMS voltmeter would indicate 100 mVRMS during the first phase and 10 mVRMS during the second phase. After the first two phases, the two input channels are both calibrated for absolute measurements of voltages. The resulting factors are displayed above the multi-meter window. After phases 1 and 2, the input channels are calibrated to measure exact voltages. This is required to use the inputs for measuring voltages with their peak and RMS value. In phase 3, a multi-sine signal covering each third-octave band from 50 Hz to 10 kHz is generated and applied to both audio outputs. The probe should be positioned in the center of the AMCC and aligned in the z-direction, the field orientation of the AMCC. The “Coil In” channel is measuring the voltage over the AMCC internal shunt, which is proportional to the magnetic field in the AMCC. At the same time, the “Probe In" channel samples the amplified signal picked up by the probe coil and provides it to a numerical integrator. The ratio of the two voltages in each third-octave filter leads to the spectral representation over the frequency band of interest. The Coil signal is scaled in dBV, and the Probe signal is first integrated and normalized to show dB A/m. The ratio probe-to-coil at the frequency of 1 kHz is the sensitivity which will be used in the consecutive T-Coil jobs. Fig-3.4 Frequency Response and Sensitivity of AM1D Probe Report Format Version 5.0.0 Page No. : 11 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report 3.3 EUT Measurements Reference and Plane The EUT is mounted in the device holder. The acoustic output of the EUT will coincide with the center point of the area formed by the dielectric wire and the middle bar of the arch’s top frame. Then EUT will be moved vertically upwards until it touches the frame. Figure 3.5 illustrates the three standard probe orientations. Position 1 is the perpendicular (axial) orientation of the probe coil. Orientation 2 is the transverse (radial) orientation. The space between the measurement positions is not fixed. It is recommended that a scan of the EUT be done for each probe coil orientation and that the maximum level recorded be used as the reading for that orientation of the probe coil. (1) The reference plane is the planar area that contains the highest point in the area of the phone that normally rests against the user’s ear. It is parallel to the centerline of the receiver area of the phone and is defined by the points of the receiver-end of the EUT handset that, in normal handset use, rest against the ear. (2) The measurement plane is parallel to, and 10 mm in front of the reference plane. (3) The reference axis is normal to the reference plane and passes through the center of the receiver speaker section or it may be centered on a secondary inductive source. (4) The measurement points may be located where the perpendicular (axial) and transverse (radial) field intensity measurements are optimum with regard to the requirements. However, the measurement points should be near the acoustic output of the EUT and shall be located in the same half of the phone as the EUT receiver. In a EUT handset with a centered receiver and a circularly symmetrical magnetic field, the measurement axis and the reference axis would coincide. (5) The relative spacing of each measurement orientations is not fixed. The perpendicular (axial) and transverse (radial) orientations should be chosen to select the optimal position. (6) The measurement point for the axial position is located 10 mm from the reference plane on the measurement axis. Fig-3.5 Axis and Planes Report Format Version 5.0.0 Page No. : 12 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report 3.4 HAC T-Coil Measurement Procedure According to ANSI C63.19-2011, the T-Coil test procedure for wireless communications device is as below. 1. Position the EUT in the test setup and connect the EUT RF connector to a base station simulator. 2. The drive level to the EUT is set such that the reference input level specified in Table 7.1 is input to the base station simulator in the 1 kHz, 1/3 octave band. This drive level shall be used for the T-Coil signal test (ABM1) at f = 1 kHz. Either a sine wave at 1025 Hz or a voice-like signal, band-limited to the 1 kHz 1/3 octave, as defined in 7.4.2, shall be used for the reference audio signal. If interference is found at 1025 Hz, an alternate nearby reference audio signal frequency may be used. The same drive level will be used for the ABM1 frequency response measurements at each 1/3 octave band center frequency. The EUT volume control may be set at any level up to maximum, provided that a signal at any frequency at maximum modulation would not result in clipping or signal overload. 3. Determine the magnetic measurement locations for the EUT, if not already specified by the manufacturer, as described in 7.4.4.1.1 and 7.4.4.2. 4. At each measurement location, measure and record the desired T-Coil magnetic signals (ABM1 at fi) as described in 7.4.4.2 in each individual ISO 266-1975 R10 standard 1/3 octave band. The desired audio band input frequency (fi) shall be centered in each 1/3 octave band maintaining the same drive level as determined in Step 2 and the reading taken for that band. Equivalent methods of determining the frequency response may also be employed, such as fast Fourier transform (FFT) analysis using noise excitation or input–output comparison using simulated speech. The full-band integrated or half-band integrated probe output, as described in D.9, may be used, as long as the appropriate calibration curve is applied to the measured result, so as to yield an accurate measurement of the field magnitude. (The resulting measurement shall be an accurate measurement in dB A/m.) All measurements of the desired signal shall be shown to be of the desired signal and not of an undesired signal. This may be shown by turning the desired signal on and off with the probe measuring the same location. If the scanning method is used, the scans shall show that all measurement points selected for the ABM1 measurement meet the ambient and test system noise criterion in 7.3.1. 5. At the measurement location for each orientation, measure and record the undesired broadband audio magnetic signal (ABM2) as described in 7.4.4.4 with no audio signal applied (or digital zero applied, if appropriate) using A-weighting, and the half-band integrator. Calculate the ratio of the desired to undesired signal strength (i.e., signal quality). 6. Determine the category that properly classifies the signal quality based on Table 8.5. Report Format Version 5.0.0 Page No. : 13 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report Fig-3.6 T-Coil Measurement Test Setup ♦ Confirm calibration of test equipment ♦ Configure and validate test setup ♦ Establish WD reference level ♦ Find measurement locations Per ANSI C63.19-2011 Section 7.3, 7.4.1(a-b) & 7.4.4.4 ♦ Position and orient probe ♦ Measure desired audio band signal strength Per ANSI C63.19-2011 Section 7.4.1(c-e) ♦ Calculate signal strength ♦ Calculate signal quality ♦ Measure frequency response(axial orientation only) No Per ANSI C63.19-2011 Section 7.4.5 - 7.4.6 All locations measured? Yes Intensity and response compliant? No Per ANSI C63.19-2011 8.3.1 & 8.3.2 Yes Determine and record signal quality category Done Per ANSI C63.19-2011 Section 8.3.4 Fig-3.7 T-Coil Signal Test Flowchart Report Format Version 5.0.0 Page No. : 14 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report 3.5 Test System Setup and Audio Input Level The test setup shown in below is to extend DASY system with the capability of Audio Band Magnetic (ABM) measurements according to standard ANSI C63.19-2011. Together with the HAC RF extension, it permits complete characterization of the emissions of a wireless device (WD). The signals measured during these tests represent the field picked up by the T-Coil of a hearing aid. Using DASY software, these orthogonal axes can be scanned with a probe incorporating a single sensor coil. The WD is mounted on the Test Arch Phantom. The acoustic center of the WD is mounted in such a way that it is centered, and this represents the reference for the combination of ABM and RF field evaluation. The ABM fields of the WD (frequency range <20 kHz) are scanned with a fully RF-shielded active 1-D probe. The probe axis is oriented in the space diagonal to the three orthogonal axes, and its single sensor can be oriented to the axes by 120 degree rotation. The probe signal is evaluated by an Audio Magnetic Measurement Instrument (AMMI) which is interfaced to the DASY computer via USB. The AMMI also provides test and calibration signals and interfaces to the Helmholtz Audio Magnetic Calibration Coil (AMCC). Through the connector at the AMMI, predefined or user-definable audio signals are available for injection into the WD during the test. Fig-3.8 System Setup for T-Coil Testing According to KDB 285076 D02, T-Coil testing for VoLTE and VoWiFi requires test instrumentation that can (1) for the system to be able to establish an IP call from/to the handset under test, (2) through an IMS (IP Multimedia Subsystem) and SIP/IP server, (3) to an analog audio adapter containing the permissible set of codecs used by the device under test, and (4) inject the necessary C63.19 test tones at the average speech level for the measurement. The test setup is illustrated in Figure 3.9. The R&S CMW500 was used as system simulator for VoLTE and VoWiFi T-Coil testing. The DAU (Data Application Unit) in CMW500 integrates IMS and SIP/IP server that can establish VoLTE and Wi-Fi calling, and transport the test tones from AMMI (Audio Magnetic Measuring Instrument) to EUT. Report Format Version 5.0.0 Page No. : 15 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report The test setup for OTT Voice Calling is using the R&S CMW500 as base station simulator. The CMW500’s data application unit was connected to the internet and allowed for an IP data connection on the EUT. An auxiliary VoIP unit installed the same OTT application was used to initiate an OTT call to the EUT. The auxiliary VoIP unit can allow for configure and monitor the codec bit rate during the OTT call. Fig-3.9 Testing Setup for VoLTE, VoWiFi and OTT Calling According to KDB 285076 D02 and ANSI C63.19-2011, the applied reference input level applied at the calibrated reference point for legacy protocols fixed to specific air-interfaces are defined in 7.4.2.1 Table 7.1 of ANSI C63.19-2011 or the ANSI C63.19-2011 VoLTE interpretation of July 2012 with −16 dBm0. The normal speech input level for HAC T-coil tests shall be set to -16 dBm0 for GSM, WCDMA and VoLTE, and -18 dBm0 for CDMA. The technical description below shows a possibility to evaluate and set the correct level with the HAC T-Coil setup with an R&S communication tester with codec. For protocols not listed in Table 7.1 of ANSI C63.19-2011 or the ANSI C63.19-2011 VoLTE interpretation, the average speech level of −20 dBm0 should be used. For VoWiFi and OTT Calling, the average speech level of -20 dBm0 was used for testing. Reference Audio Input Level: -16 dBm0 is used for GSM, WCDMA, and VoLTE -18 dBm0 is used for CDMA -20 dBm0 is used for VoWiFi, and OTT Calling Report Format Version 5.0.0 Page No. : 16 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report The speech levels with the settings at the AF connector of R&S CMW500 have been calibrated, and it can be set manually to ensure the specific full-scale speech level during T-Coil testing. For an example, the gain setting for -16 dBm0 has been calculated through below formula. 3.14 dBm0 = X dBV = -3.01 dBV -16 dBm0 = L-16dBm0 dBV = -22.00 dBV Gain 100 = G dBV = 3.13 dBV Difference for -16 dBm0 = D-16dBm0 = L-16dBm0 – G = -22 – 3.13 = -25.13 dBV Resulting Gain for -16 dBm0 = 10 ^ (D-16dBm0 / 20) x 100 = 5.54 Gain Setting = Resulting Gain x Required Gain Factor Gain setting for voice 1kHz = 5.54 x 4.33 = 23.99 Gain setting for voice 300-3kHz = 5.54 x 8.48 = 46.98 The gain setting for other signal types need to be adjusted to achieve the same average level. Those signal types have the following differences/factors compared to the 1 kHz sine signal: Duration BWC Required Signal Type (s) (dB) Gain Factor 1 kHz sine - 0.0 1.00 48k_voice_1kHz 1 0.16 4.33 48k_voice_300-3000 2 10.8 8.48 Report Format Version 5.0.0 Page No. : 17 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report 4. HAC Measurement Evaluation 4.1 Measurement Criteria The HAC Standard ANSI C63.19-2011 represents performance requirements for acceptable interoperability of hearing aids with wireless communications devices. When these parameters are met, a hearing aid operates acceptably in close proximity to a wireless communications device. 4.1.1 Field Intensity When measured as specified in this standard, the T-Coil signal shall be ≥ –18 dB (A/m) at 1 kHz, in a 1/3 octave band filter for all orientations. 4.1.2 Frequency Response The frequency response of the axial component of the magnetic field, measured in 1/3 octave bands, shall follow the below response curve, over the frequency range 300 Hz to 3000 Hz. Figure 4.1 and Figure 4.2 provide the boundaries for the specified frequency. These response curves are for true field strength measurements of the T-Coil signal. Thus the 6 dB/octave probe response has been corrected from the raw readings. Fig-4.1 Boundaries for EUT with a field ≤ -15 dB (A/m) at 1 kHz Fig-4.2 Boundaries for EUT with a field > -15 dB (A/m) at 1 kHz Report Format Version 5.0.0 Page No. : 18 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report 4.1.3 Signal Quality The worst signal quality of the three T-Coil signal measurements shall be used to determine the T-Coil mode category per below table. Telephone Parameters WD Signal Quality Category (Signal to Noise Ratio, in dB) Category T1 0 – 10 Category T2 10 – 20 Category T3 20 – 30 Category T4 > 30 4.2 EUT Configuration and Setting For HAC T-Coil testing, the EUT was linked and controlled by base station emulator. Communication between the EUT and the emulator was established by coaxial connection. The EUT was set from the emulator to radiate maximum output power during HAC testing. Also EUT was set to mute on, maximum volume, and backlight off during T-Coil testing. 4.3 HAC T-Coil Testing Results 4.3.1 GSM CMRS Voice Testing Results Codec Investigation Frequency Codec EUT Probe ABM1 ABM2 Response Frequency SNR Band Channel Setting Config. Orientation (dB A/m) (dB A/m) Margin Response (dB) (dB) GSM850 189 FR V1 1 Axial (Z) 6.9 -19.16 0.62 Pass 26.06 GSM850 189 HR V1 1 Axial (Z) 6.4 -21.29 1.06 Pass 27.69 Test Summary Frequency Ambient FCC FCC Plot Codec EUT Probe ABM1 ABM2 Response Frequency SNR Band Channel Noise Limit Margin T-Rating No. Setting Config. Orientation (dB A/m) (dB A/m) Margin Response (dB) (dB A/m) (dB) (dB) (dB) GSM850 189 FR V1 1 Axial (Z) 6.90 -19.16 -49.89 0.62 Pass 26.06 20 -6.06 T3 01 GSM850 189 FR V1 1 Radial (Y) -4.42 -28.56 -54.64 N/A N/A 24.14 20 -4.14 T3 GSM850 189 FR V1 2 Axial (Z) 8.63 -23.69 -51.09 0.68 Pass 32.32 20 -12.32 T4 GSM850 189 FR V1 2 Radial (Y) -8.83 -39.89 -54.07 N/A N/A 31.06 20 -11.06 T4 GSM1900 661 FR V1 1 Axial (Z) 7.15 -22.46 -49.89 1.18 Pass 29.61 20 -9.61 T3 02 GSM1900 661 FR V1 1 Radial (Y) -4.48 -32.16 -54.64 N/A N/A 27.68 20 -7.68 T3 GSM1900 661 FR V1 2 Axial (Z) 9.39 -21.95 -49.89 0.67 Pass 31.34 20 -11.34 T4 GSM1900 661 FR V1 2 Radial (Y) -2.07 -30.36 -54.19 N/A N/A 28.29 20 -8.29 T3 Report Format Version 5.0.0 Page No. : 19 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report 4.3.2 WCDMA CMRS Voice Testing Results Codec Investigation Frequency Codec EUT Probe ABM1 ABM2 Response Frequency SNR Band Channel Setting Config. Orientation (dB A/m) (dB A/m) Margin Response (dB) (dB) WCDMA V 4182 AMR 4.75kbps 1 Axial (Z) 5.96 -37.50 1.05 Pass 43.46 WCDMA V 4182 AMR 7.95kbps 1 Axial (Z) 6.24 -37.02 0.83 Pass 43.26 WCDMA V 4182 AMR 12.2kbps 1 Axial (Z) 4.26 -38.89 1.04 Pass 43.15 Test Summary Frequency Ambient FCC FCC Plot Codec EUT Probe ABM1 ABM2 Response Frequency SNR Band Channel Noise Limit Margin T-Rating No. Setting Config. Orientation (dB A/m) (dB A/m) Margin Response (dB) (dB A/m) (dB) (dB) (dB) AMR WCDMA II 9400 1 Axial (Z) 1.29 -39.71 -50.58 0.85 Pass 41.00 20 -21.00 T4 12.2kbps AMR 03 WCDMA II 9400 1 Radial (Y) -13.30 -49.64 -54.30 N/A N/A 36.34 20 -16.34 T4 12.2kbps AMR WCDMA II 9400 2 Axial (Z) 6.39 -33.04 -52.81 1.11 Pass 39.43 20 -19.43 T4 12.2kbps AMR WCDMA II 9400 2 Radial (Y) -3.65 -42.17 -54.34 N/A N/A 38.52 20 -18.52 T4 12.2kbps AMR WCDMA IV 1413 1 Axial (Z) 1.90 -42.08 -50.58 0.96 Pass 43.98 20 -23.98 T4 12.2kbps AMR 04 WCDMA IV 1413 1 Radial (Y) -12.62 -50.87 -54.30 N/A N/A 38.25 20 -18.25 T4 12.2kbps AMR WCDMA IV 1413 2 Axial (Z) 6.43 -34.87 -52.81 1.26 Pass 41.30 20 -21.30 T4 12.2kbps AMR WCDMA IV 1413 2 Radial (Y) -3.68 -43.40 -54.34 N/A N/A 39.72 20 -19.72 T4 12.2kbps AMR WCDMA V 4182 1 Axial (Z) 4.26 -38.89 -50.58 1.04 Pass 43.15 20 -23.15 T4 12.2kbps AMR 05 WCDMA V 4182 1 Radial (Y) -10.43 -49.65 -54.30 N/A N/A 39.22 20 -19.22 T4 12.2kbps AMR WCDMA V 4182 2 Axial (Z) 6.27 -35.17 -52.81 1.22 Pass 41.44 20 -21.44 T4 12.2kbps AMR WCDMA V 4182 2 Radial (Y) -3.29 -42.84 -54.34 N/A N/A 39.55 20 -19.55 T4 12.2kbps 4.3.3 CDMA CMRS Voice Testing Results Codec Investigation Frequency Codec EUT Probe ABM1 ABM2 Response Frequency SNR Band Channel Setting Config. Orientation (dB A/m) (dB A/m) Margin Response (dB) (dB) CDMA BC0 384 RC1+SO68 1 Axial (Z) 1.51 -35.04 1.78 Pass 36.55 CDMA BC0 384 RC3+SO68 1 Axial (Z) 2.39 -43.63 1.08 Pass 46.02 CDMA BC0 384 RC4+SO68 1 Axial (Z) 2.05 -43.64 1.17 Pass 45.69 CDMA BC0 384 RC1+SO3 1 Axial (Z) 1.11 -34.85 1.27 Pass 35.96 CDMA BC0 384 RC3+SO3 1 Axial (Z) 1.33 -44.94 1.41 Pass 46.27 CDMA BC0 384 RC4+SO3 1 Axial (Z) 1.61 -44.51 1.42 Pass 46.12 Report Format Version 5.0.0 Page No. : 20 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report Test Summary Frequency Ambient FCC FCC Plot Codec EUT Probe ABM1 ABM2 Response Frequency SNR Band Channel Noise Limit Margin T-Rating No. Setting Config. Orientation (dB A/m) (dB A/m) Margin Response (dB) (dB A/m) (dB) (dB) (dB) CDMA BC0 384 RC1+SO3 1 Axial (Z) 1.11 -34.85 -50.58 1.27 Pass 35.96 20 -15.96 T4 06 CDMA BC0 384 RC1+SO3 1 Radial (Y) -17.90 -49.67 -54.30 N/A N/A 31.77 20 -11.77 T4 CDMA BC0 384 RC1+SO3 2 Axial (Z) 0.80 -45.68 -49.45 1.28 Pass 46.48 20 -26.48 T4 CDMA BC0 384 RC1+SO3 2 Radial (Y) -7.87 -49.98 -54.10 N/A N/A 42.11 20 -22.11 T4 CDMA BC1 600 RC1+SO3 1 Axial (Z) 1.03 -29.25 -49.45 1.45 Pass 30.28 20 -10.28 T4 07 CDMA BC1 600 RC1+SO3 1 Radial (Y) -8.86 -36.77 -54.10 N/A N/A 27.91 20 -7.91 T3 CDMA BC1 600 RC1+SO3 2 Axial (Z) -4.09 -48.78 -49.45 1.27 Pass 44.69 20 -24.69 T4 CDMA BC1 600 RC1+SO3 2 Radial (Y) -10.46 -52.07 -54.10 N/A N/A 41.61 20 -21.61 T4 CDMA 580 RC1+SO3 1 Axial (Z) 0.07 -31.62 -49.45 1.08 Pass 31.69 20 -11.69 T4 BC10 CDMA 08 580 RC1+SO3 1 Radial (Y) -10.78 -40.17 -54.10 N/A N/A 29.39 20 -9.39 T3 BC10 CDMA 580 RC1+SO3 2 Axial (Z) 0.45 -31.76 -49.45 1.39 Pass 32.21 20 -12.21 T4 BC10 CDMA 580 RC1+SO3 2 Radial (Y) -8.72 -38.85 -54.10 N/A N/A 30.13 20 -10.13 T4 BC10 4.3.4 VoLTE Testing Results Radio Configuration Investigation Bandwidth EUT UL-DL Probe ABM1 ABM2 SNR Air Interface Band Modulation RB Size RB Offset Channel (MHz) Config. Configuration Orientation (dB A/m) (dB A/m) (dB) FDD-LTE LTE B25 20 1 QPSK 1 0 26365 N/A Axial (Z) 2.35 -45.43 47.78 FDD-LTE LTE B25 20 1 QPSK 1 50 26365 N/A Axial (Z) 1.94 -46.84 48.78 FDD-LTE LTE B25 20 1 QPSK 1 99 26365 N/A Axial (Z) 2.30 -45.52 47.82 FDD-LTE LTE B25 20 1 QPSK 50 0 26365 N/A Axial (Z) 1.68 -45.71 47.39 FDD-LTE LTE B25 20 1 QPSK 50 25 26365 N/A Axial (Z) 2.21 -46.01 48.22 FDD-LTE LTE B25 20 1 QPSK 50 50 26365 N/A Axial (Z) 2.09 -45.88 47.97 FDD-LTE LTE B25 20 1 QPSK 100 0 26365 N/A Axial (Z) 1.63 -46.41 48.04 FDD-LTE LTE B25 20 1 16QAM 50 0 26365 N/A Axial (Z) 2.10 -45.62 47.72 FDD-LTE LTE B25 20 1 64QAM 50 0 26365 N/A Axial (Z) 2.58 -45.13 47.71 FDD-LTE LTE B25 15 1 QPSK 36 0 26365 N/A Axial (Z) 1.29 -45.75 47.04 FDD-LTE LTE B25 10 1 QPSK 25 0 26365 N/A Axial (Z) 1.14 -46.48 47.62 FDD-LTE LTE B25 5 1 QPSK 12 0 26365 N/A Axial (Z) 1.89 -45.61 47.50 FDD-LTE LTE B25 3 1 QPSK 8 0 26365 N/A Axial (Z) 1.81 -45.58 47.39 FDD-LTE LTE B25 1.4 1 QPSK 3 0 26365 N/A Axial (Z) 2.00 -45.24 47.24 TDD-LTE LTE B41 15 1 QPSK 36 0 40620 0 Axial (Z) 1.14 -39.48 40.62 TDD-LTE LTE B41 15 1 QPSK 36 0 40620 1 Axial (Z) 1.97 -39.31 41.28 TDD-LTE LTE B41 15 1 QPSK 36 0 40620 2 Axial (Z) 2.42 -38.82 41.24 TDD-LTE LTE B41 15 1 QPSK 36 0 40620 3 Axial (Z) 1.88 -40.56 42.44 TDD-LTE LTE B41 15 1 QPSK 36 0 40620 4 Axial (Z) -0.11 -41.53 41.42 TDD-LTE LTE B41 15 1 QPSK 36 0 40620 5 Axial (Z) 2.11 -40.89 43.00 TDD-LTE LTE B41 15 1 QPSK 36 0 40620 6 Axial (Z) 1.09 -39.92 41.01 Report Format Version 5.0.0 Page No. : 21 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report Codec Investigation Frequency Bandwidth EUT Codec Probe ABM1 ABM2 Response Frequency SNR Band Modulation RB Size RB Offset Channel (MHz) Config. Setting Orientation (dB A/m) (dB A/m) Margin Response (dB) (dB) AMR NB LTE B25 15 QPSK 1 36 0 26365 Axial (Z) 2.44 -44.67 0.67 Pass 47.11 4.75kbps AMR NB LTE B25 15 QPSK 1 36 0 26365 Axial (Z) 3.86 -44.45 1.22 Pass 48.31 12.2kbps AMR WB LTE B25 15 QPSK 1 36 0 26365 Axial (Z) 1.29 -45.75 1.66 Pass 47.04 6.6kbps AMR WB LTE B25 15 QPSK 1 36 0 26365 Axial (Z) 3.40 -44.27 1.37 Pass 47.67 23.85kbps EVS NB LTE B25 15 QPSK 1 36 0 26365 Axial (Z) 3.98 -44.23 1.25 Pass 48.21 5.9kbps EVS NB LTE B25 15 QPSK 1 36 0 26365 Axial (Z) 3.94 -44.82 1.05 Pass 48.76 13.2kbps EVS WB LTE B25 15 QPSK 1 36 0 26365 Axial (Z) 3.57 -44.64 1.24 Pass 48.21 5.9kbps EVS WB LTE B25 15 QPSK 1 36 0 26365 Axial (Z) 3.90 -44.40 1.32 Pass 48.30 13.2kbps EVS SWB LTE B25 15 QPSK 1 36 0 26365 Axial (Z) 3.47 -44.62 1.37 Pass 48.09 9.6kbps EVS SWB LTE B25 15 QPSK 1 36 0 26365 Axial (Z) 4.19 -44.42 1.14 Pass 48.61 13.2kbps AMR NB LTE B41 15 QPSK 1 36 0 40620 Axial (Z) 2.46 -39.44 0.81 Pass 41.90 4.75kbps AMR NB LTE B41 15 QPSK 1 36 0 40620 Axial (Z) 2.95 -39.57 1.08 Pass 42.52 12.2kbps AMR WB LTE B41 15 QPSK 1 36 0 40620 Axial (Z) 1.14 -39.48 1.31 Pass 40.62 6.6kbps AMR WB LTE B41 15 QPSK 1 36 0 40620 Axial (Z) 3.48 -39.01 1.02 Pass 42.49 23.85kbps EVS NB LTE B41 15 QPSK 1 36 0 40620 Axial (Z) 3.14 -38.42 1.21 Pass 41.56 5.9kbps EVS NB LTE B41 15 QPSK 1 36 0 40620 Axial (Z) 3.92 -38.98 1.05 Pass 42.90 13.2kbps EVS WB LTE B41 15 QPSK 1 36 0 40620 Axial (Z) 3.95 -39.30 0.99 Pass 43.25 5.9kbps EVS WB LTE B41 15 QPSK 1 36 0 40620 Axial (Z) 3.78 -39.21 0.97 Pass 42.99 13.2kbps EVS SWB LTE B41 15 QPSK 1 36 0 40620 Axial (Z) 3.42 -38.87 0.38 Pass 42.29 9.6kbps EVS SWB LTE B41 15 QPSK 1 36 0 40620 Axial (Z) 3.36 -39.06 1.10 Pass 42.42 13.2kbps Test Summary Frequency ABM1 ABM2 Ambient FCC FCC Plot Bandwidth EUT RB RB UL-DL Codec Probe Response Frequency SNR Band Modulation Channel (dB (dB Noise Limit Margin T-Rating No. (MHz) Config. Size Offset Config. Setting Orientation Margin Response (dB) A/m) A/m) (dB A/m) (dB) (dB) (dB) AMR WB LTE B2 15 QPSK 1 36 0 18900 N/A Axial (Z) 7.77 -33.89 -49.46 0.29 Pass 41.66 20 -21.66 T4 6.6kbps AMR WB 09 LTE B2 15 QPSK 1 36 0 18900 N/A Radial (Y) -3.43 -44.26 -54.07 N/A N/A 40.83 20 -20.83 T4 6.6kbps AMR WB LTE B2 15 QPSK 2 36 0 18900 N/A Axial (Z) 2.32 -46.00 -51.09 1.69 Pass 48.32 20 -28.32 T4 6.6kbps AMR WB LTE B2 15 QPSK 2 36 0 18900 N/A Radial (Y) 9.85 -31.33 -54.07 N/A N/A 41.18 20 -21.18 T4 6.6kbps AMR WB LTE B4 15 QPSK 1 36 0 20175 N/A Axial (Z) 2.36 -45.56 -51.09 1.24 Pass 47.92 20 -27.92 T4 6.6kbps AMR WB 10 LTE B4 15 QPSK 1 36 0 20175 N/A Radial (Y) -11.95 -51.73 -54.07 N/A N/A 39.78 20 -19.78 T4 6.6kbps AMR WB LTE B4 15 QPSK 2 36 0 20175 N/A Axial (Z) 7.96 -33.93 -49.46 0.52 Pass 41.89 20 -21.89 T4 6.6kbps AMR WB LTE B4 15 QPSK 2 36 0 20175 N/A Radial (Y) -4.57 -45.23 -54.07 N/A N/A 40.66 20 -20.66 T4 6.6kbps AMR WB LTE B5 5 QPSK 1 12 0 20525 N/A Axial (Z) 2.49 -45.63 -51.09 1.15 Pass 48.12 20 -28.12 T4 6.6kbps AMR WB 11 LTE B5 5 QPSK 1 12 0 20525 N/A Radial (Y) -9.86 -50.62 -54.07 N/A N/A 40.76 20 -20.76 T4 6.6kbps AMR WB LTE B5 5 QPSK 2 12 0 20525 N/A Axial (Z) 8.85 -32.67 -50.43 1.52 Pass 41.52 20 -21.52 T4 6.6kbps AMR WB LTE B5 5 QPSK 2 12 0 20525 N/A Radial (Y) -3.25 -44.07 -52.88 N/A N/A 40.82 20 -20.82 T4 6.6kbps Report Format Version 5.0.0 Page No. : 22 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report Frequency ABM1 ABM2 Ambient FCC FCC Plot Bandwidth EUT RB RB UL-DL Codec Probe Response Frequency SNR Band Modulation Channel (dB (dB Noise Limit Margin T-Rating No. (MHz) Config. Size Offset Config. Setting Orientation Margin Response (dB) A/m) A/m) (dB A/m) (dB) (dB) (dB) AMR WB LTE B7 15 QPSK 1 36 0 21100 N/A Axial (Z) 2.73 -45.27 -51.09 0.85 Pass 48.00 20 -28.00 T4 6.6kbps AMR WB 12 LTE B7 15 QPSK 1 36 0 21100 N/A Radial (Y) -10.29 -50.46 -54.07 N/A N/A 40.17 20 -20.17 T4 6.6kbps AMR WB LTE B7 15 QPSK 2 36 0 21100 N/A Axial (Z) 7.40 -34.34 -50.43 0.96 Pass 41.74 20 -21.74 T4 6.6kbps AMR WB LTE B7 15 QPSK 2 36 0 21100 N/A Radial (Y) -2.21 -42.84 -52.88 N/A N/A 40.63 20 -20.63 T4 6.6kbps AMR WB LTE B12 5 QPSK 1 12 0 23095 N/A Axial (Z) 1.94 -44.74 -51.09 0.94 Pass 46.68 20 -26.68 T4 6.6kbps AMR WB 13 LTE B12 5 QPSK 1 12 0 23095 N/A Radial (Y) -9.09 -49.38 -54.07 N/A N/A 40.29 20 -20.29 T4 6.6kbps AMR WB LTE B12 5 QPSK 2 12 0 23095 N/A Axial (Z) 2.42 -38.90 -50.43 1.14 Pass 41.32 20 -21.32 T4 6.6kbps AMR WB LTE B12 5 QPSK 2 12 0 23095 N/A Radial (Y) 8.85 -31.67 -52.88 N/A N/A 40.52 20 -20.52 T4 6.6kbps AMR WB LTE B13 5 QPSK 1 12 0 23230 N/A Axial (Z) 2.11 -45.77 -51.09 1.52 Pass 47.88 20 -27.88 T4 6.6kbps AMR WB 14 LTE B13 5 QPSK 1 12 0 23230 N/A Radial (Y) -10.06 -50.80 -54.07 N/A N/A 40.74 20 -20.74 T4 6.6kbps AMR WB LTE B13 5 QPSK 2 12 0 23230 N/A Axial (Z) 6.52 -35.86 -50.43 1.11 Pass 42.38 20 -22.38 T4 6.6kbps AMR WB LTE B13 5 QPSK 2 12 0 23230 N/A Radial (Y) -2.43 -43.64 -52.88 N/A N/A 41.21 20 -21.21 T4 6.6kbps AMR WB LTE B17 5 QPSK 1 12 0 23790 N/A Axial (Z) 2.40 -45.59 -51.09 1.31 Pass 47.99 20 -27.99 T4 6.6kbps AMR WB 15 LTE B17 5 QPSK 1 12 0 23790 N/A Radial (Y) -10.56 -51.02 -54.07 N/A N/A 40.46 20 -20.46 T4 6.6kbps AMR WB LTE B17 5 QPSK 2 12 0 23790 N/A Axial (Z) 8.25 -34.19 -50.43 0.66 Pass 42.44 20 -22.44 T4 6.6kbps AMR WB LTE B17 5 QPSK 2 12 0 23790 N/A Radial (Y) -1.47 -42.78 -52.88 N/A N/A 41.31 20 -21.31 T4 6.6kbps AMR WB LTE B25 15 QPSK 1 36 0 26365 N/A Axial (Z) 1.29 -45.75 -51.09 1.66 Pass 47.04 20 -27.04 T4 6.6kbps AMR WB 16 LTE B25 15 QPSK 1 36 0 26365 N/A Radial (Y) -10.53 -50.11 -54.07 N/A N/A 39.58 20 -19.58 T4 6.6kbps AMR WB LTE B25 15 QPSK 2 36 0 26365 N/A Axial (Z) 3.25 -39.11 -50.43 1.42 Pass 42.36 20 -22.36 T4 6.6kbps AMR WB LTE B25 15 QPSK 2 36 0 26365 N/A Radial (Y) -9.25 -50.39 -52.88 N/A N/A 41.14 20 -21.14 T4 6.6kbps AMR WB LTE B26 15 QPSK 1 36 0 26865 N/A Axial (Z) 2.51 -45.73 -51.09 1.46 Pass 48.24 20 -28.24 T4 6.6kbps AMR WB 17 LTE B26 15 QPSK 1 36 0 26865 N/A Radial (Y) -10.32 -51.08 -54.07 N/A N/A 40.76 20 -20.76 T4 6.6kbps AMR WB LTE B26 15 QPSK 2 36 0 26865 N/A Axial (Z) 2.24 -40.97 -50.43 1.24 Pass 43.21 20 -23.21 T4 6.6kbps AMR WB LTE B26 15 QPSK 2 36 0 26865 N/A Radial (Y) -8.41 -50.15 -52.88 N/A N/A 41.74 20 -21.74 T4 6.6kbps AMR WB LTE B66 15 QPSK 1 36 0 132322 N/A Axial (Z) 2.49 -45.27 -51.09 1.56 Pass 47.76 20 -27.76 T4 6.6kbps AMR WB 18 LTE B66 15 QPSK 1 36 0 132322 N/A Radial (Y) -9.73 -50.46 -54.07 N/A N/A 40.73 20 -20.73 T4 6.6kbps AMR WB LTE B66 15 QPSK 2 36 0 132322 N/A Axial (Z) 3.41 -38.73 -50.43 1.47 Pass 42.14 20 -22.14 T4 6.6kbps AMR WB LTE B66 15 QPSK 2 36 0 132322 N/A Radial (Y) -7.42 -48.34 -52.88 N/A N/A 40.92 20 -20.92 T4 6.6kbps AMR WB LTE B38 15 QPSK 1 36 0 38000 0 Axial (Z) 1.52 -38.60 -51.09 1.37 Pass 40.12 20 -20.12 T4 6.6kbps AMR WB 19 LTE B38 15 QPSK 1 36 0 38000 0 Radial (Y) -11.78 -49.54 -54.07 N/A N/A 37.76 20 -17.76 T4 6.6kbps AMR WB LTE B38 15 QPSK 2 36 0 38000 0 Axial (Z) 2.54 -39.81 -50.43 1.32 Pass 42.35 20 -22.35 T4 6.6kbps AMR WB LTE B38 15 QPSK 2 36 0 38000 0 Radial (Y) -8.25 -47.77 -52.88 N/A N/A 39.52 20 -19.52 T4 6.6kbps AMR WB LTE B41 15 QPSK 1 36 0 40620 0 Axial (Z) 2.31 -38.82 -51.09 1.44 Pass 41.13 20 -21.13 T4 6.6kbps AMR WB 20 LTE B41 15 QPSK 1 36 0 40620 0 Radial (Y) -11.19 -49.57 -54.07 N/A N/A 38.38 20 -18.38 T4 6.6kbps AMR WB LTE B41 15 QPSK 2 36 0 40620 0 Axial (Z) 3.32 -38.82 -50.43 1.36 Pass 42.14 20 -22.14 T4 6.6kbps AMR WB LTE B41 15 QPSK 2 36 0 40620 0 Radial (Y) -10.44 -50.55 -52.88 N/A N/A 40.11 20 -20.11 T4 6.6kbps Report Format Version 5.0.0 Page No. : 23 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report 4.3.5 VoWiFi Testing Results Radio Configuration Investigation EUT Probe ABM1 ABM2 SNR Band Mode Data Rate Channel Config. Orientation (dB A/m) (dB A/m) (dB) WLAN 2.4G 802.11b 1Mbps 1 6 Axial (Z) -4.64 -39.47 34.83 WLAN 2.4G 802.11b 11Mbps 1 6 Axial (Z) -4.24 -41.64 37.40 WLAN 2.4G 802.11g 6Mbps 1 6 Axial (Z) -2.04 -42.41 40.37 WLAN 2.4G 802.11g 54Mbps 1 6 Axial (Z) -3.04 -41.54 38.50 WLAN 2.4G 802.11n HT20 MCS0 1 6 Axial (Z) -2.97 -41.77 38.80 WLAN 2.4G 802.11n HT20 MCS7 1 6 Axial (Z) -1.78 -41.48 39.70 WLAN 2.4G 802.11ac HT20 MCS0 1 6 Axial (Z) -2.65 -41.17 38.52 WLAN 2.4G 802.11ac HT20 MCS8 1 6 Axial (Z) -1.96 -42.35 40.39 WLAN 5G 802.11a 6Mbps 1 40 Axial (Z) -4.14 -42.73 38.59 WLAN 5G 802.11a 54Mbps 1 40 Axial (Z) -1.90 -42.95 41.05 WLAN 5G 802.11n HT20 MCS0 1 40 Axial (Z) -3.56 -42.36 38.80 WLAN 5G 802.11n HT20 MCS7 1 40 Axial (Z) -2.01 -41.96 39.95 WLAN 5G 802.11n HT40 MCS0 1 38 Axial (Z) -3.63 -42.72 39.09 WLAN 5G 802.11n HT40 MCS7 1 38 Axial (Z) -2.76 -42.16 39.40 WLAN 5G 802.11ac HT20 MCS0 1 40 Axial (Z) -3.21 -42.24 39.03 WLAN 5G 802.11ac HT20 MCS8 1 40 Axial (Z) -1.69 -42.02 40.33 WLAN 5G 802.11ac HT40 MCS0 1 38 Axial (Z) -2.05 -41.69 39.64 WLAN 5G 802.11ac HT40 MCS9 1 38 Axial (Z) -3.25 -42.55 39.30 Codec Investigation Frequency EUT Codec Probe ABM1 ABM2 Response Frequency SNR Band Mode Data Rate Channel Config. Setting Orientation (dB A/m) (dB A/m) Margin Response (dB) (dB) AMR NB WLAN 2.4G 802.11b 1Mbps 1 6 Axial (Z) -5.02 -40.29 0.63 Pass 35.27 4.75kbps AMR NB WLAN 2.4G 802.11b 1Mbps 1 6 Axial (Z) -3.27 -39.47 1.18 Pass 36.20 12.2kbps AMR WB WLAN 2.4G 802.11b 1Mbps 1 6 Axial (Z) -4.64 -39.47 1.05 Pass 34.83 6.6kbps AMR WB WLAN 2.4G 802.11b 1Mbps 1 6 Axial (Z) -3.62 -39.24 0.92 Pass 35.62 23.85kbps EVS NB WLAN 2.4G 802.11b 1Mbps 1 6 Axial (Z) -3.58 -40.05 0.89 Pass 36.47 5.9kbps EVS NB WLAN 2.4G 802.11b 1Mbps 1 6 Axial (Z) -3.11 -39.62 1.03 Pass 36.51 13.2kbps EVS WB WLAN 2.4G 802.11b 1Mbps 1 6 Axial (Z) -3.11 -39.09 1.09 Pass 35.98 5.9kbps EVS WB WLAN 2.4G 802.11b 1Mbps 1 6 Axial (Z) -3.06 -38.94 1.21 Pass 35.88 13.2kbps EVS SWB WLAN 2.4G 802.11b 1Mbps 1 6 Axial (Z) -3.63 -39.46 0.93 Pass 35.83 9.6kbps EVS SWB WLAN 2.4G 802.11b 1Mbps 1 6 Axial (Z) -2.90 -38.66 1.19 Pass 35.76 13.2kbps Report Format Version 5.0.0 Page No. : 24 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report Test Summary Frequency Ambient FCC FCC Plot EUT Codec Probe ABM1 ABM2 Response Frequency SNR Band Mode Data Rate Channel Noise Limit Margin T-Rating No. Config. Setting Orientation (dB A/m) (dB A/m) Margin Response (dB) (dB A/m) (dB) (dB) (dB) WLAN AMR WB 802.11b 1Mbps 1 6 Axial (Z) -4.64 -39.47 -48.97 1.05 Pass 34.83 20 -14.83 T4 2.4G 6.6kbps WLAN AMR WB 21 802.11b 1Mbps 1 6 Radial (Y) -14.15 -41.36 -53.55 N/A N/A 27.21 20 -7.21 T3 2.4G 6.6kbps WLAN AMR WB 802.11b 1Mbps 2 6 Axial (Z) -3.65 -38.89 -49.52 1.04 Pass 35.24 20 -15.24 T4 2.4G 6.6kbps WLAN AMR WB 802.11b 1Mbps 2 6 Radial (Y) -13.24 -41.29 -52.34 N/A N/A 28.05 20 -8.05 T3 2.4G 6.6kbps WLAN AMR WB 802.11a 6Mbps 1 40 Axial (Z) -4.14 -42.73 -48.97 1.42 Pass 38.59 20 -18.59 T4 5.2G 6.6kbps WLAN AMR WB 22 802.11a 6Mbps 1 40 Radial (Y) -12.55 -43.82 -53.55 N/A N/A 31.27 20 -11.27 T4 5.2G 6.6kbps WLAN AMR WB 802.11a 6Mbps 2 40 Axial (Z) -4.05 -43.61 -49.52 1.17 Pass 39.56 20 -19.56 T4 5.2G 6.6kbps WLAN AMR WB 802.11a 6Mbps 2 40 Radial (Y) -12.05 -44.40 -52.34 N/A N/A 32.35 20 -12.35 T4 5.2G 6.6kbps WLAN AMR WB 802.11a 6Mbps 1 56 Axial (Z) -4.53 -42.79 -48.97 1.02 Pass 38.26 20 -18.26 T4 5.3G 6.6kbps WLAN AMR WB 23 802.11a 6Mbps 1 56 Radial (Y) -15.01 -46.26 -53.55 N/A N/A 31.25 20 -11.25 T4 5.3G 6.6kbps WLAN AMR WB 802.11a 6Mbps 2 56 Axial (Z) -5.21 -42.35 -49.52 1.34 Pass 37.14 20 -17.14 T4 5.3G 6.6kbps WLAN AMR WB 802.11a 6Mbps 2 56 Radial (Y) -14.32 -46.76 -52.34 N/A N/A 32.44 20 -12.44 T4 5.3G 6.6kbps WLAN AMR WB 802.11a 6Mbps 1 124 Axial (Z) -2.60 -41.37 -48.97 1.24 Pass 38.77 20 -18.77 T4 5.6G 6.6kbps WLAN AMR WB 24 802.11a 6Mbps 1 124 Radial (Y) -14.87 -46.01 -53.55 N/A N/A 31.14 20 -11.14 T4 5.6G 6.6kbps WLAN AMR WB 802.11a 6Mbps 2 124 Axial (Z) -3.61 -41.06 -49.52 1.27 Pass 37.45 20 -17.45 T4 5.6G 6.6kbps WLAN AMR WB 802.11a 6Mbps 2 124 Radial (Y) -15.20 -47.55 -52.34 N/A N/A 32.35 20 -12.35 T4 5.6G 6.6kbps WLAN AMR WB 802.11a 6Mbps 1 157 Axial (Z) -2.74 -41.23 -48.97 0.97 Pass 38.49 20 -18.49 T4 5.8G 6.6kbps WLAN AMR WB 25 802.11a 6Mbps 1 157 Radial (Y) -13.72 -45.59 -53.55 N/A N/A 31.87 20 -11.87 T4 5.8G 6.6kbps WLAN AMR WB 802.11a 6Mbps 2 157 Axial (Z) -2.98 -40.54 -49.52 1.08 Pass 37.56 20 -17.56 T4 5.8G 6.6kbps WLAN AMR WB 802.11a 6Mbps 2 157 Radial (Y) -14.70 -47.16 -52.34 N/A N/A 32.46 20 -12.46 T4 5.8G 6.6kbps 4.3.6 OTT Voice Calling Testing Results The device supported a pre-installed application, Google Duo, whose features allow the option of voice-only communications. According to KDB 285076 D02, all air interfaces via a data connection with an application providing voice functionality need to be considered for HAC testing. The Google Duo uses the audio codec as Opus and supports codec bit rate from 6 kbps to 75 kbps. All air interfaces capable of a data connection were evaluated. Radio Configuration Investigation The worst-case of radio configuration found by investigation for VoLTE and VoWiFi testing result is used for OTT Voice Calling test on LTE and WLAN network. Codec Investigation Frequency EUT Codec Probe ABM1 ABM2 Response Frequency SNR Band Mode Channel Application Config. Setting Orientation (dB A/m) (dB A/m) Margin Response (dB) (dB) GSM850 EDGE 189 1 Duo Opus 6kbps Axial (Z) 14.15 -23.79 1.35 Pass 37.94 GSM850 EDGE 189 1 Duo Opus 75kbps Axial (Z) 13.50 -23.60 1.14 Pass 37.10 WCDMA V HSPA 4182 1 Duo Opus 6kbps Axial (Z) 15.66 -24.56 0.50 Pass 40.22 WCDMA V HSPA 4182 1 Duo Opus 75kbps Axial (Z) 16.54 -23.66 0.46 Pass 40.20 Report Format Version 5.0.0 Page No. : 25 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report Test Summary Frequency Ambient FCC FCC Plot EUT Codec Probe ABM1 ABM2 Response Frequency SNR Band Mode Channel Noise Limit Margin T-Rating No. Config. Setting Orientation (dB A/m) (dB A/m) Margin Response (dB) (dB A/m) (dB) (dB) (dB) Opus GSM850 EDGE 189 1 Axial (Z) 13.50 -23.60 -50.27 0.91 Pass 37.10 20 -17.10 T4 75kbps Opus 26 GSM850 EDGE 189 1 Radial (Y) -8.15 -44.16 -53.38 N/A N/A 36.01 20 -16.01 T4 75kbps Opus GSM850 EDGE 189 2 Axial (Z) 14.52 -23.60 -50.14 1.12 Pass 38.12 20 -18.12 T4 75kbps Opus GSM850 EDGE 189 2 Radial (Y) -7.24 -44.35 -52.22 N/A N/A 37.11 20 -17.11 T4 75kbps Opus GSM1900 EDGE 661 1 Axial (Z) 13.64 -25.48 -50.27 1.05 Pass 39.12 20 -19.12 T4 75kbps Opus 27 GSM1900 EDGE 661 1 Radial (Y) 3.98 -33.96 -53.38 N/A N/A 37.94 20 -17.94 T4 75kbps Opus GSM1900 EDGE 661 2 Axial (Z) 14.21 -25.12 -50.14 1.02 Pass 39.33 20 -19.33 T4 75kbps Opus GSM1900 EDGE 661 2 Radial (Y) 4.58 -33.63 -52.22 N/A N/A 38.21 20 -18.21 T4 75kbps Opus WCDMA II HSPA 9400 1 Axial (Z) 12.51 -42.16 -50.24 0.42 Pass 54.67 20 -34.67 T4 75kbps Opus 28 WCDMA II HSPA 9400 1 Radial (Y) 4.37 -34.24 -53.73 N/A N/A 38.61 20 -18.61 T4 75kbps Opus WCDMA II HSPA 9400 2 Axial (Z) 13.22 -29.03 -50.14 0.55 Pass 42.25 20 -22.25 T4 75kbps Opus WCDMA II HSPA 9400 2 Radial (Y) 5.11 -34.44 -52.22 N/A N/A 39.55 20 -19.55 T4 75kbps Opus WCDMA IV HSPA 1413 1 Axial (Z) 15.93 -24.12 -50.24 0.27 Pass 40.05 20 -20.05 T4 75kbps Opus 29 WCDMA IV HSPA 1413 1 Radial (Y) 5.01 -33.45 -53.73 N/A N/A 38.46 20 -18.46 T4 75kbps Opus WCDMA IV HSPA 1413 2 Axial (Z) 16.21 -24.91 -50.14 1.11 Pass 41.12 20 -21.12 T4 75kbps Opus WCDMA IV HSPA 1413 2 Radial (Y) 5.12 -34.40 -52.22 N/A N/A 39.52 20 -19.52 T4 75kbps Opus WCDMA V HSPA 4182 1 Axial (Z) 13.36 -26.69 -50.24 0.46 Pass 40.05 20 -20.05 T4 75kbps Opus 30 WCDMA V HSPA 4182 1 Radial (Y) 3.96 -35.03 -53.73 N/A N/A 38.99 20 -18.99 T4 75kbps Opus WCDMA V HSPA 4182 2 Axial (Z) 14.44 -27.88 -50.14 0.56 Pass 42.32 20 -22.32 T4 75kbps Opus WCDMA V HSPA 4182 2 Radial (Y) 4.21 -35.04 -52.22 N/A N/A 39.25 20 -19.25 T4 75kbps RTAP Opus CDMA BC0 384 1 Axial (Z) 6.90 -30.71 -50.46 0.63 Pass 37.61 20 -17.61 T4 153.6kbps 75kbps RTAP Opus 31 CDMA BC0 384 1 Radial (Y) 5.80 -31.00 -54.05 N/A N/A 36.80 20 -16.80 T4 153.6kbps 75kbps RTAP Opus CDMA BC0 384 2 Axial (Z) 7.25 -31.27 -50.14 0.41 Pass 38.52 20 -18.52 T4 153.6kbps 75kbps RTAP Opus CDMA BC0 384 2 Radial (Y) 6.11 -31.41 -52.22 N/A N/A 37.52 20 -17.52 T4 153.6kbps 75kbps RTAP Opus CDMA BC1 600 1 Axial (Z) 11.85 -25.39 -50.46 0.73 Pass 37.24 20 -17.24 T4 153.6kbps 75kbps RTAP Opus 32 CDMA BC1 600 1 Radial (Y) 5.20 -31.68 -54.05 N/A N/A 36.88 20 -16.88 T4 153.6kbps 75kbps RTAP Opus CDMA BC1 600 2 Axial (Z) 12.11 -27.41 -50.14 0.88 Pass 39.52 20 -19.52 T4 153.6kbps 75kbps RTAP Opus CDMA BC1 600 2 Radial (Y) 4.58 -32.83 -52.22 N/A N/A 37.41 20 -17.41 T4 153.6kbps 75kbps CDMA RTAP Opus 580 1 Axial (Z) 13.31 -24.03 -50.46 0.83 Pass 37.34 20 -17.34 T4 BC10 153.6kbps 75kbps CDMA RTAP Opus 33 580 1 Radial (Y) 5.21 -31.65 -54.05 N/A N/A 36.86 20 -16.86 T4 BC10 153.6kbps 75kbps CDMA RTAP Opus 580 2 Axial (Z) 14.21 -23.91 -50.14 0.65 Pass 38.12 20 -18.12 T4 BC10 153.6kbps 75kbps CDMA RTAP Opus 580 2 Radial (Y) 6.32 -30.89 -52.22 N/A N/A 37.21 20 -17.21 T4 BC10 153.6kbps 75kbps Opus LTE B25 QPSK15M 26365 1 Axial (Z) 9.31 -28.06 -50.46 0.64 Pass 37.37 20 -17.37 T4 75kbps Opus 34 LTE B25 QPSK15M 26365 1 Radial (Y) 5.60 -31.40 -54.05 N/A N/A 37.00 20 -17.00 T4 75kbps Opus LTE B25 QPSK15M 26365 2 Axial (Z) 10.21 -29.04 -50.14 0.74 Pass 39.25 20 -19.25 T4 75kbps Opus LTE B25 QPSK15M 26365 2 Radial (Y) 6.54 -31.71 -52.22 N/A N/A 38.25 20 -18.25 T4 75kbps Report Format Version 5.0.0 Page No. : 26 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report Frequency Ambient FCC FCC Plot EUT Codec Probe ABM1 ABM2 Response Frequency SNR Band Mode Channel Noise Limit Margin T-Rating No. Config. Setting Orientation (dB A/m) (dB A/m) Margin Response (dB) (dB A/m) (dB) (dB) (dB) Opus LTE B38 QPSK20M 38000 1 Axial (Z) 10.90 -26.27 -50.46 0.62 Pass 37.17 20 -17.17 T4 75kbps Opus 35 LTE B38 QPSK20M 38000 1 Radial (Y) 3.99 -32.99 -54.05 N/A N/A 36.98 20 -16.98 T4 75kbps Opus LTE B38 QPSK20M 38000 2 Axial (Z) 11.11 -28.14 -50.14 0.77 Pass 39.25 20 -19.25 T4 75kbps Opus LTE B38 QPSK20M 38000 2 Radial (Y) 4.25 -32.87 -52.22 N/A N/A 37.12 20 -17.12 T4 75kbps Opus WLAN 2.4G 802.11b 6 1 Axial (Z) 15.78 -24.15 -50.24 0.47 Pass 39.93 20 -19.93 T4 75kbps Opus 36 WLAN 2.4G 802.11b 6 1 Radial (Y) 4.57 -34.66 -53.73 N/A N/A 39.23 20 -19.23 T4 75kbps Opus WLAN 2.4G 802.11b 6 2 Axial (Z) 15.32 -24.80 -50.14 0.62 Pass 40.12 20 -20.12 T4 75kbps Opus WLAN 2.4G 802.11b 6 2 Radial (Y) 5.54 -34.69 -52.22 N/A N/A 40.23 20 -20.23 T4 75kbps Opus WLAN 5.6G 802.11a 116 1 Axial (Z) 15.05 -24.92 -50.24 0.51 Pass 39.97 20 -19.97 T4 75kbps Opus 37 WLAN 5.6G 802.11a 116 1 Radial (Y) 8.40 -31.35 -53.73 N/A N/A 39.75 20 -19.75 T4 75kbps Opus WLAN 5.6G 802.11a 116 2 Axial (Z) 16.25 -24.02 -50.14 0.45 Pass 40.27 20 -20.27 T4 75kbps Opus WLAN 5.6G 802.11a 116 2 Radial (Y) 7.41 -32.76 -52.22 N/A N/A 40.17 20 -20.17 T4 75kbps Test Engineer：Mars Chang, and Willy Chang Report Format Version 5.0.0 Page No. : 27 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report 5. Calibration of Test Equipment Equipment Manufacturer Model SN Cal. Date Cal. Interval Audio Band Magnetic Probe SPEAG AM1DV3 3060 Jan. 16, 2018 1 Year Data Acquisition Electronics SPEAG DAE4 861 May 30, 2018 1 Year Universal Radio Communication Tester R&S CMW500 164864 Jan. 15, 2018 1 Year Universal Radio Communication Tester R&S CMW500 152443 Aug. 20, 2018 1 Year Test Arch Phantom SPEAG Arch N/A N/A N/A Report Format Version 5.0.0 Page No. : 28 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report 6. Measurement Uncertainty Uncertainty Standard Standard Probability Ci Ci Error Description Value Divisor Uncertainty Uncertainty Distribution (ABM1) (ABM2) (±%) (ABM1) (ABM2) Probe Sensitivity Reference Level 3.0 Normal 1 1 1 ± 3.0 % ± 3.0 % AMCC Geometry 0.4 Rectangular √3 1 1 ± 0.2 % ± 0.2 % AMCC Current 1.0 Rectangular √3 1 1 ± 0.6 % ± 0.6 % Probe Positioning During 0.07 Rectangular √3 1 1 ± 0.04 % ± 0.04 % Calibration Noise Contribution 0.02 Rectangular √3 0.0143 1 ± 0.0 % ± 0.01 % Frequency Slope 5.9 Rectangular √3 0.1 1 ± 0.3 % ± 3.4 % Probe System Repeatability / Drift 1.0 Rectangular √3 1 1 ± 0.6 % ± 0.6 % Linearity / Dynamic Range 0.6 Rectangular √3 1 1 ± 0.3 % ± 0.3 % Acoustic Noise 1.0 Rectangular √3 0.1 1 ± 0.1 % ± 0.6 % Probe Angle 2.3 Rectangular √3 1 1 ± 1.3 % ± 1.3 % Spectral Processing 0.9 Rectangular √3 1 1 ± 0.5 % ± 0.5 % Integration Time 0.6 Normal 1 1 5 ± 0.6 % ± 3.0 % Field Distribution 0.2 Rectangular √3 1 1 ± 0.1 % ± 0.1 % Test Signal Ref. Signal Spectral 0.6 Rectangular √3 0 1 ± 0.0 % ± 0.3 % Response Positioning Probe Positioning 1.9 Rectangular √3 1 1 ± 1.1 % ± 1.1 % Phantom Thickness 0.9 Rectangular √3 1 1 ± 0.5 % ± 0.5 % EUT Positioning 1.9 Rectangular √3 1 1 ± 1.1 % ± 1.1 % External Contributions RF Interference 0.0 Rectangular √3 1 0.3 ± 0.0 % ± 0.0 % Test Signal Variation 2.0 Rectangular √3 1 1 ± 1.2 % ± 1.2 % Combined Standard Uncertainty ± 4.0 % ± 6.1 % Coverage Factor for 95 % K=2 Expanded Uncertainty ± 8.0 % ± 12.2 % Uncertainty Budget for HAC T-Coil Report Format Version 5.0.0 Page No. : 29 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report 7. Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Taiwan HwaYa EMC/RF/Safety/Telecom Lab: Add: No. 19, Hwa Ya 2nd Rd, Wen Hwa Vil., Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. Tel: 886-3-318-3232 Fax: 886-3-327-0892 Taiwan LinKo EMC/RF Lab: Add: No. 47-2, 14th Ling, Chia Pau Vil., Linkou Dist., New Taipei City 244, Taiwan, R.O.C. Tel: 886-2-2605-2180 Fax: 886-2-2605-1924 Taiwan HsinChu EMC/RF Lab: Add: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 30078, Taiwan, R.O.C. Tel: 886-3-593-5343 Fax: 886-3-593-5342 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The road map of all our labs can be found in our web site also. ---END--- Report Format Version 5.0.0 Page No. : 30 of 30 Report No. : HC181001C06-1 Issued Date : Dec. 27, 2018

FCC HAC (T-Coil) Test Report Appendix A. Plots of HAC T-Coil Measurement The plots for HAC measurement are shown as follows. Report Format Version 5.0.0 Issued Date : Dec. 27, 2018 Report No. : HC181001C06-1

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/07 P01 GSM850_Ch189_FR V1_EUT1_Axial (Z) DUT: 181001C06 Communication System: GSM; Frequency: 836.4 MHz;Duty Cycle: 1:8.3 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 26.06 dB ABM1 comp = 6.90 dBA/m Location: 0, -0.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/07 P01 GSM850_Ch189_FR V1_EUT1_Radial (Y) DUT: 181001C06 Communication System: GSM; Frequency: 836.4 MHz;Duty Cycle: 1:8.3 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 24.14 dB ABM1 comp = -4.42 dBA/m Location: -5, 10, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/07 P01 GSM850_Ch189_FR V1_EUT1_Freq Resp DUT: 181001C06 Communication System: GSM; Frequency: 836.4 MHz;Duty Cycle: 1:8.3 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/07 P02 GSM1900_Ch661_FR V1_EUT1_Axial (Z) DUT: 181001C06 Communication System: GSM; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 29.61 dB ABM1 comp = 7.15 dBA/m Location: 0, -0.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/07 P02 GSM1900_Ch661_FR V1_EUT1_Radial (Y) DUT: 181001C06 Communication System: GSM; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 27.68 dB ABM1 comp = -4.48 dBA/m Location: -5.5, 10, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/07 P02 GSM1900_Ch661_FR V1_EUT1_Freq Resp DUT: 181001C06 Communication System: GSM; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/30 P03 WCDMA II_Ch9400_AMR12.2k_EUT1_Axial (Z) DUT: 181001C06 Communication System: WCDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 41.00 dB ABM1 comp = 1.29 dBA/m Location: 4.5, -5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/30 P03 WCDMA II_Ch9400_AMR12.2k_EUT1_Radial (Y) DUT: 181001C06 Communication System: WCDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 36.34 dB ABM1 comp = -13.30 dBA/m Location: -10, 15, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/30 P03 WCDMA II_Ch9400_AMR12.2k_EUT1_Freq Resp DUT: 181001C06 Communication System: WCDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/30 P04 WCDMA IV_Ch1413_AMR12.2k_EUT1_Axial (Z) DUT: 181001C06 Communication System: WCDMA; Frequency: 1732.6 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 43.98 dB ABM1 comp = 1.90 dBA/m Location: 4, -5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/30 P04 WCDMA IV_Ch1413_AMR12.2k_EUT1_Radial (Y) DUT: 181001C06 Communication System: WCDMA; Frequency: 1732.6 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 38.25 dB ABM1 comp = -12.62 dBA/m Location: -9.5, 14.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/30 P04 WCDMA IV_Ch1413_AMR12.2k_EUT1_Freq Resp DUT: 181001C06 Communication System: WCDMA; Frequency: 1732.6 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/30 P05 WCDMA V_Ch4182_AMR12.2k_EUT1_Axial (Z) DUT: 181001C06 Communication System: WCDMA; Frequency: 836.4 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 43.15 dB ABM1 comp = 4.26 dBA/m Location: 1.5, -4.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/30 P05 WCDMA V_Ch4182_AMR12.2k_EUT1_Radial (Y) DUT: 181001C06 Communication System: WCDMA; Frequency: 836.4 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 39.22 dB ABM1 comp = -10.43 dBA/m Location: -7, 13.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/30 P05 WCDMA V_Ch4182_AMR12.2k_EUT1_Freq Resp DUT: 181001C06 Communication System: WCDMA; Frequency: 836.4 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/31 P06 CDMA BC0_Ch384_RC1+SO3_EUT1_Axial (Z) DUT: 181001C06 Communication System: CDMA2000; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 35.96 dB ABM1 comp = 1.11 dBA/m Location: 0.5, 0, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/31 P06 CDMA BC0_Ch384_RC1+SO3_EUT1_Radial (Y) DUT: 181001C06 Communication System: CDMA2000; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 31.77 dB ABM1 comp = -17.90 dBA/m Location: -11, 14.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/30 P06 CDMA BC0_Ch384_RC1+SO3_EUT1_Freq Resp DUT: 181001C06 Communication System: CDMA2000; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/31 P07 CDMA BC1_Ch600_RC1+SO3_EUT1_Axial (Z) DUT: 181001C06 Communication System: CDMA2000; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 30.28 dB ABM1 comp = 1.03 dBA/m Location: 0, 0, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/31 P07 CDMA BC1_Ch600_RC1+SO3_EUT1_Radial (Y) DUT: 181001C06 Communication System: CDMA2000; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 27.91 dB ABM1 comp = -8.86 dBA/m Location: -3, 10, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/31 P07 CDMA BC1_Ch600_RC1+SO3_EUT1_Freq Resp DUT: 181001C06 Communication System: CDMA2000; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/31 P08 CDMA BC10_Ch580_RC1+SO3_EUT1_Axial (Z) DUT: 181001C06 Communication System: CDMA2000; Frequency: 820.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 31.69 dB ABM1 comp = 0.07 dBA/m Location: 0.5, 0.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/31 P08 CDMA BC10_Ch580_RC1+SO3_EUT1_Radial (Y) DUT: 181001C06 Communication System: CDMA2000; Frequency: 820.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 29.39 dB ABM1 comp = -10.78 dBA/m Location: -5, 10, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/31 P08 CDMA BC10_Ch580_RC1+SO3_EUT1_Freq Resp DUT: 181001C06 Communication System: CDMA2000; Frequency: 820.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/20 P09 LTE 2_QPSK15M_Ch18900_36RB_OS0_AMR WB6.6k_EUT1_Axial (Z) DUT: 181001C06 Communication System: LTE; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 41.66 dB ABM1 comp = 7.77 dBA/m Location: -2.5, -2.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/20 P09 LTE 2_QPSK15M_Ch18900_36RB_OS0_AMR WB6.6k_EUT1_Radial (Y) DUT: 181001C06 Communication System: LTE; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 40.83 dB ABM1 comp = -3.43 dBA/m Location: -0.5, 15, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/20 P09 LTE 2_QPSK15M_Ch18900_36RB_OS0_AMR WB6.6k_EUT1_Freq Resp DUT: 181001C06 Communication System: LTE; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P10 LTE 4_QPSK15M_Ch20175_36RB_OS0_AMR WB6.6k_EUT1_Axial (Z) DUT: 181001C06 Communication System: LTE; Frequency: 1732.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 47.92 dB ABM1 comp = 2.36 dBA/m Location: 0, -4, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P10 LTE 4_QPSK15M_Ch20175_36RB_OS0_AMR WB6.6k_EUT1_Radial (Y) DUT: 181001C06 Communication System: LTE; Frequency: 1732.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 39.78 dB ABM1 comp = -11.95 dBA/m Location: -5.5, 14.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P10 LTE 4_QPSK15M_Ch20175_36RB_OS0_AMR WB6.6k_EUT1_Freq Resp DUT: 181001C06 Communication System: LTE; Frequency: 1732.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P11 LTE 5_QPSK5M_Ch20525_12RB_OS0_AMR WB6.6k_EUT1_Axial (Z) DUT: 181001C06 Communication System: LTE; Frequency: 836.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 48.12 dB ABM1 comp = 2.49 dBA/m Location: 0, -4.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P11 LTE 5_QPSK5M_Ch20525_12RB_OS0_AMR WB6.6k_EUT1_Radial (Y) DUT: 181001C06 Communication System: LTE; Frequency: 836.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 40.76 dB ABM1 comp = -9.86 dBA/m Location: -1.5, 15, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P11 LTE 5_QPSK5M_Ch20525_12RB_OS0_AMR WB6.6k_EUT1_Freq Resp DUT: 181001C06 Communication System: LTE; Frequency: 836.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P12 LTE 7_QPSK15M_Ch21100_36RB_OS0_AMR WB6.6k_EUT1_Axial (Z) DUT: 181001C06 Communication System: LTE; Frequency: 2535 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 48.00 dB ABM1 comp = 2.73 dBA/m Location: 0, -3.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P12 LTE 7_QPSK15M_Ch21100_36RB_OS0_AMR WB6.6k_EUT1_Radial (Y) DUT: 181001C06 Communication System: LTE; Frequency: 2535 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans): Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 40.17 dB ABM1 comp = -10.29 dBA/m Location: -2, 15, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P12 LTE 7_QPSK15M_Ch21100_36RB_OS0_AMR WB6.6k_EUT1_Freq Resp DUT: 181001C06 Communication System: LTE; Frequency: 2535 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P13 LTE 12_QPSK5M_Ch23095_12RB_OS0_AMR WB6.6k_EUT1_Axial (Z) DUT: 181001C06 Communication System: LTE; Frequency: 707.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 46.68 dB ABM1 comp = 1.94 dBA/m Location: 0, -4, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P13 LTE 12_QPSK5M_Ch23095_12RB_OS0_AMR WB6.6k_EUT1_Radial (Y) DUT: 181001C06 Communication System: LTE; Frequency: 707.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 40.29 dB ABM1 comp = -9.09 dBA/m Location: -3.5, -15, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P13 LTE 12_QPSK5M_Ch23095_12RB_OS0_AMR WB6.6k_EUT1_Freq Resp DUT: 181001C06 Communication System: LTE; Frequency: 707.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P14 LTE 13_QPSK5M_Ch23230_12RB_OS0_AMR WB6.6k_EUT1_Axial (Z) DUT: 181001C06 Communication System: LTE; Frequency: 782 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 47.88 dB ABM1 comp = 2.11 dBA/m Location: 0, -4.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P14 LTE 13_QPSK5M_Ch23230_12RB_OS0_AMR WB6.6k_EUT1_Radial (Y) DUT: 181001C06 Communication System: LTE; Frequency: 782 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 40.74 dB ABM1 comp = -10.06 dBA/m Location: -1.5, 15, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P14 LTE 13_QPSK5M_Ch23230_12RB_OS0_AMR WB6.6k_EUT1_Freq Resp DUT: 181001C06 Communication System: LTE; Frequency: 782 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P15 LTE 17_QPSK5M_Ch23790_12RB_OS0_AMR WB6.6k_EUT1_Axial (Z) DUT: 181001C06 Communication System: LTE; Frequency: 710 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 47.99 dB ABM1 comp = 2.40 dBA/m Location: 0, -4, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P15 LTE 17_QPSK5M_Ch23790_12RB_OS0_AMR WB6.6k_EUT1_Radial (Y) DUT: 181001C06 Communication System: LTE; Frequency: 710 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 40.46 dB ABM1 comp = -10.56 dBA/m Location: -2.5, 14.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P15 LTE 17_QPSK5M_Ch23790_12RB_OS0_AMR WB6.6k_EUT1_Freq Resp DUT: 181001C06 Communication System: LTE; Frequency: 710 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P16 LTE 25_QPSK15M_Ch26365_36RB_OS0_AMR WB6.6k_EUT1_Axial (Z) DUT: 181001C06 Communication System: LTE; Frequency: 1882.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 47.04 dB ABM1 comp = 1.29 dBA/m Location: 0, -4.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P16 LTE 25_QPSK15M_Ch26365_36RB_OS0_AMR WB6.6k_EUT1_Radial (Y) DUT: 181001C06 Communication System: LTE; Frequency: 1882.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 39.58 dB ABM1 comp = -10.53 dBA/m Location: -2.5, 14.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P16 LTE 25_QPSK15M_Ch26365_36RB_OS0_AMR WB6.6k_EUT1_Freq Resp DUT: 181001C06 Communication System: LTE; Frequency: 1882.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P17 LTE 26_QPSK15M_Ch26865_36RB_OS0_AMR WB6.6k_EUT1_Axial (Z) DUT: 181001C06 Communication System: LTE; Frequency: 831.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 48.24 dB ABM1 comp = 2.51 dBA/m Location: 0, -4.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P17 LTE 26_QPSK15M_Ch26865_36RB_OS0_AMR WB6.6k_EUT1_Radial (Y) DUT: 181001C06 Communication System: LTE; Frequency: 831.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 40.76 dB ABM1 comp = -10.32 dBA/m Location: -3, 14.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P17 LTE 26_QPSK15M_Ch26865_36RB_OS0_AMR WB6.6k_EUT1_Freq Resp DUT: 181001C06 Communication System: LTE; Frequency: 831.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P18 LTE 66_QPSK15M_Ch132322_36RB_OS0_AMR WB6.6k_EUT1_Axial (Z) DUT: 181001C06 Communication System: LTE; Frequency: 1745 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 47.76 dB ABM1 comp = 2.49 dBA/m Location: 0, -4.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P18 LTE 66_QPSK15M_Ch132322_36RB_OS0_AMR WB6.6k_EUT1_Radial (Y) DUT: 181001C06 Communication System: LTE; Frequency: 1745 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 40.73 dB ABM1 comp = -9.73 dBA/m Location: -1.5, 14.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P18 LTE 66_QPSK15M_Ch132322_36RB_OS0_AMR WB6.6k_EUT1_Freq Resp DUT: 181001C06 Communication System: LTE; Frequency: 1745 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P19 LTE 38_QPSK15M_Ch38000_36RB_OS0_AMR WB6.6k_EUT1_Axial (Z) DUT: 181001C06 Communication System: LTE; Frequency: 2595 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 40.12 dB ABM1 comp = 1.52 dBA/m Location: -2, 0.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P19 LTE 38_QPSK15M_Ch38000_36RB_OS0_AMR WB6.6k_EUT1_Radial (Y) DUT: 181001C06 Communication System: LTE; Frequency: 2595 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 37.76 dB ABM1 comp = -11.78 dBA/m Location: -5.5, 14.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P19 LTE 38_QPSK15M_Ch38000_36RB_OS0_AMR WB6.6k_EUT1_Freq Resp DUT: 181001C06 Communication System: LTE; Frequency: 2595 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P20 LTE 41_QPSK15M_Ch40620_36RB_OS0_AMR WB6.6k_EUT1_Axial (Z) DUT: 181001C06 Communication System: LTE; Frequency: 2593 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 41.13 dB ABM1 comp = 2.31 dBA/m Location: -1, 0, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P20 LTE 41_QPSK15M_Ch40620_36RB_OS0_AMR WB6.6k_EUT1_Radial (Y) DUT: 181001C06 Communication System: LTE; Frequency: 2593 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 38.38 dB ABM1 comp = -11.19 dBA/m Location: -5.5, 14.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/12 P20 LTE 41_QPSK15M_Ch40620_36RB_OS0_AMR WB6.6k_EUT1_Freq Resp DUT: 181001C06 Communication System: LTE; Frequency: 2593 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/13 P21 WLAN2.4G_802.11b_1M_Ch6_AMR WB6.6k_EUT1_Axial (Z) DUT: 181001C06 Communication System: WLAN_2.4G; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 34.83 dB ABM1 comp = -4.64 dBA/m Location: 4.5, -3, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/13 P21 WLAN2.4G_802.11b_1M_Ch6_AMR WB6.6k_EUT1_Radial (Y) DUT: 181001C06 Communication System: WLAN_2.4G; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 27.21 dB ABM1 comp = -14.15 dBA/m Location: -5, -10, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/13 P21 WLAN2.4G_802.11b_1M_Ch6_AMR WB6.6k_EUT1_Freq Resp DUT: 181001C06 Communication System: WLAN_2.4G; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/13 P22 WLAN5.2G_802.11a_6M_Ch40_AMR WB6.6k_EUT1_Axial (Z) DUT: 181001C06 Communication System: WLAN_5G ; Frequency: 5200 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 38.59 dB ABM1 comp = -4.14 dBA/m Location: 3, -4.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/13 P22 WLAN5.2G_802.11a_6M_Ch40_AMR WB6.6k_EUT1_Radial (Y) DUT: 181001C06 Communication System: WLAN_5G ; Frequency: 5200 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 31.27 dB ABM1 comp = -12.55 dBA/m Location: -2.5, -11.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/13 P22 WLAN5.2G_802.11a_6M_Ch40_AMR WB6.6k_EUT1_Freq Resp DUT: 181001C06 Communication System: WLAN_5G ; Frequency: 5200 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/13 P23 WLAN5.3G_802.11a_6M_Ch56_AMR WB 6.6k_EUT1_Axial (Z) DUT: 181001C06 Communication System: WLAN_5G; Frequency: 5280 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 38.26 dB ABM1 comp = -4.53 dBA/m Location: 3, -4.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/13 P23 WLAN5.3G_802.11a_6M_Ch56_AMR WB6.6k_EUT1_Radial (Y) DUT: 181001C06 Communication System: WLAN_5G; Frequency: 5280 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 31.25 dB ABM1 comp = -15.01 dBA/m Location: -4.5, -13.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/13 P23 WLAN5.3G_802.11a_6M_Ch56_AMR WB6.6k_EUT1_Freq Resp DUT: 181001C06 Communication System: WLAN_5G; Frequency: 5280 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/13 P24 WLAN5.6G_802.11a_6M_Ch124_AMR WB6.6k_EUT1_Axial (Z) DUT: 181001C06 Communication System: WLAN_5G; Frequency: 5620 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 38.77 dB ABM1 comp = -2.60 dBA/m Location: 0, -1.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/13 P24 WLAN5.6G_802.11a_6M_Ch124_AMR WB6.6k_EUT1_Radial (Y) DUT: 181001C06 Communication System: WLAN_5G; Frequency: 5620 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 31.14 dB ABM1 comp = -14.87 dBA/m Location: -5, -12, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/13 P24 WLAN5.6G_802.11a_6M_Ch124_AMR WB6.6k_EUT1_Freq Resp DUT: 181001C06 Communication System: WLAN_5G; Frequency: 5620 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/13 P25 WLAN5.8G_802.11a_6M_Ch157_AMR WB6.6k_EUT1_Axial (Z) DUT: 181001C06 Communication System: WLAN_5G ; Frequency: 5785 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 38.49 dB ABM1 comp = -2.74 dBA/m Location: 0.5, -2.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/13 P25 WLAN5.8G_802.11a_6M_Ch157_AMR WB6.6k_EUT1_Radial (Y) DUT: 181001C06 Communication System: WLAN_5G ; Frequency: 5785 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 31.87 dB ABM1 comp = -13.72 dBA/m Location: -4.5, -11.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/13 P25 WLAN5.8G_802.11a_6M_Ch157_AMR WB6.6k_EUT1_Freq Resp DUT: 181001C06 Communication System: WLAN_5G ; Frequency: 5785 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 0 kg/m3 Ambient Temperature：23.7 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/15 P26 GSM850_EDGE_Ch189_Duo_Opus 75kbps_Axial (Z) DUT: 181001C06 Communication System: EDGE; Frequency: 836.4 MHz;Duty Cycle: 1:8.3 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 37.10 dB ABM1 comp = 13.50 dBA/m Location: -0.5, 0, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/15 P26 GSM850_EDGE_Ch189_Duo_Opus 75kbps_Radial (Y) DUT: 181001C06 Communication System: EDGE; Frequency: 836.4 MHz;Duty Cycle: 1:8.3 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 36.01 dB ABM1 comp = -8.15 dBA/m Location: -15, 15, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/15 P26 GSM850_EDGE_Ch189_Duo_Opus 75kbps_Freq Resp DUT: 181001C06 Communication System: EDGE; Frequency: 836.4 MHz;Duty Cycle: 1:8.3 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/15 P27 GSM1900_EDGE_Ch661_Duo_Opus 75kbps_Axial (Z) DUT: 181001C06 Communication System: EPDG; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 39.12 dB ABM1 comp = 13.64 dBA/m Location: 0, 0, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/15 P27 GSM1900_EDGE_Ch661_Duo_Opus 75kbps_Radial (Y) DUT: 181001C06 Communication System: EPDG; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 37.94 dB ABM1 comp = 3.98 dBA/m Location: -4, 10, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/15 P27 GSM1900_EDGE_Ch661_Duo_Opus 75kbps_Freq Resp DUT: 181001C06 Communication System: EPDG; Frequency: 1880 MHz;Duty Cycle: 1:8.3 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/16 P28 WCDMA II_HSPA_Ch9400_Opus 75kbps_Axial (Z) DUT: 181001C06 Communication System: HSPA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 54.67 dB ABM1 comp = 12.51 dBA/m Location: -4.5, -2, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/16 P28 WCDMA II_HSPA_Ch9400_Opus 75kbps_Radial (Y) DUT: 181001C06 Communication System: HSPA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 38.61 dB ABM1 comp = 4.37 dBA/m Location: -6.5, 10.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/16 P28 WCDMA II_HSPA_Ch9400_Opus 75kbps_Freq Resp DUT: 181001C06 Communication System: HSPA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/16 P29 WCDMA IV_HSPA_Ch1413_Opus 75kbps_Axial (Z) DUT: 181001C06 Communication System: HSPA; Frequency: 1732.6 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 40.05 dB ABM1 comp = 15.93 dBA/m Location: 2.5, -3, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/16 P29 WCDMA IV_HSPA_Ch1413_Opus 75kbps_Radial (Y) DUT: 181001C06 Communication System: HSPA; Frequency: 1732.6 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 38.46 dB ABM1 comp = 5.01 dBA/m Location: -5.5, 10, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/16 P29 WCDMA IV_HSPA_Ch1413_Opus 75kbps_Freq Resp DUT: 181001C06 Communication System: HSPA; Frequency: 1732.6 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/16 P30 WCDMA V_HSPA_Ch4182_Opus 75kbps_Axial (Z) DUT: 181001C06 Communication System: HSPA; Frequency: 836.4 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 40.05 dB ABM1 comp = 13.36 dBA/m Location: 3, -7, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/16 P30 WCDMA V_HSPA_Ch4182_Opus 75kbps_Radial (Y) DUT: 181001C06 Communication System: HSPA; Frequency: 836.4 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 38.99 dB ABM1 comp = 3.96 dBA/m Location: -6, 12, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/16 P30 WCDMA V_HSPA_Ch4182_Opus 75kbps_Freq Resp DUT: 181001C06 Communication System: HSPA; Frequency: 836.4 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/29 P31 OTT_CDMA BC0_RTAP 153.6_Ch384_Duo Opus75kbps_Axial (Z) DUT: 181001C06 Communication System: CDMA2000; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn679; Calibrated: 2018/03/05 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 37.61 dB ABM1 comp = 6.90 dBA/m Location: -4, -9, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/29 P31 OTT_CDMA BC0_RTAP 153.6_Ch384_Duo Opus75kbps_Radial (Y) DUT: 181001C06 Communication System: CDMA2000; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn679; Calibrated: 2018/03/05 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 36.80 dB ABM1 comp = 5.80 dBA/m Location: 0, -12, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/29 P31 OTT_CDMA BC0_RTAP 153.6_Ch384_Duo Opus75kbps_Freq Resp DUT: 181001C06 Communication System: CDMA2000 ; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn679; Calibrated: 2018/03/05 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/29 P32 OTT_CDMA BC1_RTAP 153.6_Ch600_Duo Opus75kbps_Axial (Z) DUT: 181001C06 Communication System: CDMA2000 ; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn679; Calibrated: 2018/03/05 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 37.24 dB ABM1 comp = 11.85 dBA/m Location: 3, -6.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/29 P32 OTT_CDMA BC1_RTAP 153.6_Ch600_Duo Opus75kbps_Radial (Y) DUT: 181001C06 Communication System: CDMA2000 ; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn679; Calibrated: 2018/03/05 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 36.88 dB ABM1 comp = 5.20 dBA/m Location: -1.5, -12.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/29 P32 OTT_CDMA BC1_RTAP 153.6_Ch600_Duo Opus75kbps_Freq Resp DUT: 181001C06 Communication System: CDMA2000 ; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn679; Calibrated: 2018/03/05 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/29 P33 OTT_CDMA BC10_RTAP 153.6_Ch580_Duo Opus75kbps_Axial (Z) DUT: 181001C06 Communication System: CDMA2000 ; Frequency: 820.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn679; Calibrated: 2018/03/05 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 37.34 dB ABM1 comp = 13.31 dBA/m Location: 3.5, -1.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/29 P33 OTT_CDMA BC10_RTAP 153.6_Ch580_Duo Opus75kbps_Radial (Y) DUT: 181001C06 Communication System: CDMA2000 ; Frequency: 820.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn679; Calibrated: 2018/03/05 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 36.86 dB ABM1 comp = 5.21 dBA/m Location: -1.5, -12.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/29 P33 OTT_CDMA BC10_RTAP 153.6_Ch580_Duo Opus75kbps_Freq Resp DUT: 181001C06 Communication System: CDMA2000 ; Frequency: 820.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn679; Calibrated: 2018/03/05 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/29 P34 OTT_LTE 25_QPSK15M_Ch26365_Duo Opus75kbps_Axial (Z) DUT: 181001C06 Communication System: LTE; Frequency: 1882.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn679; Calibrated: 2018/03/05 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 37.37 dB ABM1 comp = 9.31 dBA/m Location: -4, 2.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/29 P34 OTT_LTE 25_QPSK15M_Ch26365_Duo Opus75kbps_Radial (Y) DUT: 181001C06 Communication System: LTE; Frequency: 1882.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn679; Calibrated: 2018/03/05 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 37.00 dB ABM1 comp = 5.60 dBA/m Location: -1, -12, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/29 P34 OTT_LTE 25_QPSK15M_Ch26365_Duo Opus75kbps_Freq Resp DUT: 181001C06 Communication System: LTE; Frequency: 1882.5 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn679; Calibrated: 2018/03/05 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/29 P35 OTT_LTE 38_QPSK20M_Ch38000_Duo Opus75kbps_Axial (Z) DUT: 181001C06 Communication System: LTE TDD CF0; Frequency: 2595 MHz;Duty Cycle: 1:1.58 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn679; Calibrated: 2018/03/05 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 37.17 dB ABM1 comp = 10.90 dBA/m Location: -3, 2.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/29 P35 OTT_LTE 38_QPSK20M_Ch38000_Duo Opus75kbps_Radial (Y) DUT: 181001C06 Communication System: LTE TDD CF0; Frequency: 2595 MHz;Duty Cycle: 1:1.58 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn679; Calibrated: 2018/03/05 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 36.98 dB ABM1 comp = 3.99 dBA/m Location: -4.5, -11.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/11/29 P35 OTT_LTE 38_QPSK20M_Ch38000_Duo Opus75kbps_Freq Resp DUT: 181001C06 Communication System: LTE TDD CF0; Frequency: 2595 MHz;Duty Cycle: 1:1.58 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.6 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn679; Calibrated: 2018/03/05 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/16 P36 WLAN2.4G_802.11b_Ch6_Opus 75kbps_Axial (Z) DUT: 181001C06 Communication System: WLAN_2.4G; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 39.93 dB ABM1 comp = 15.78 dBA/m Location: 3.5, -1.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/16 P36 WLAN2.4G_802.11b_Ch6_Opus 75kbps_Radial (Y) DUT: 181001C06 Communication System: WLAN_2.4G; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 39.23 dB ABM1 comp = 4.57 dBA/m Location: -7, 7.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/16 P36 WLAN2.4G_802.11b_Ch6_Opus 75kbps_Freq Resp DUT: 181001C06 Communication System: WLAN_2.4G; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/16 P37 WLAN5.6G_802.11a_Ch116_Opus 75kbps_Axial (Z) DUT: 181001C06 Communication System: WLAN_5G; Frequency: 5580 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 39.97 dB ABM1 comp = 15.05 dBA/m Location: -3, -2.5, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/16 P37 WLAN5.6G_802.11a_Ch116_Opus 75kbps_Radial (Y) DUT: 181001C06 Communication System: WLAN_5G; Frequency: 5580 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Interpolated grid: dx=1.000 mm, dy=1.000 mm ABM1/ABM2 = 39.75 dB ABM1 comp = 8.40 dBA/m Location: -1.5, -11, 3.7 mm

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2018/10/16 P37 WLAN5.6G_802.11a_Ch116_Opus 75kbps_Freq Resp DUT: 181001C06 Communication System: WLAN_5G; Frequency: 5580 MHz;Duty Cycle: 1:1 Medium: Air Medium parameters used: σ = 0 S/m, εr = 1; ρ = 1 kg/m3 Ambient Temperature：23.9 ℃ DASY5 Configuration: - Probe: AM1DV3 - 3060; ; Calibrated: 2018/01/16 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn861; Calibrated: 2018/05/30 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BA; - Measurement SW: DASY52, Version 52.10 (1); SEMCAD X Version 14.6.11 (7439) T-Coil scan (scan for ANSI C63.19 compliance)/General Scans: Measurement grid: dx=10mm, dy=10mm

FCC HAC (T-Coil) Test Report Appendix B. Calibration Certificate for Probe The SPEAG calibration certificates are shown as follows. Report Format Version 5.0.0 Issued Date : Dec. 27, 2018 Report No. : HC181001C06-1

Calibration _ Laboratory of 8 \~ S Schweizerischer Kalibrierdienst Schmid & Partner & SEV/EME! c Service suisse d‘étalonnage Engineering AG Z zn Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland *4 ’/}:\\\\\b S swiss Calibration Service "Hlubuls® * Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client B.V. ADT (Auden) Certificate No: AM1DV3—3060_Jan18 CALIBRATION CERTIFICATE | Object AM1DV3 — SN: 3060 Calibration procedure(s) QA CAL—24.v4 Calibration procedure for AM1D magnetic field probes and TMFS in the audio range Calibration date: January 16, 2018 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Keithley Multimeter Type 2001 SN: 0810278 31—Aug—17 (No. 21092) Aug—18 Reference Probe AM1DV2 SN: 1008 03—Jan—18 (No. AM1DV2—1008_Jan18) Jan—19 DAE4 SN: 660 21—Dec—17 (No. DAE4—660_Dec17) Dec—18 Secondary Standards ID # Check Date (in house) Scheduled Check AMCC SN: 1050 01—Oct—13 (in house check Oct—17) Oct—19 AMMI Audio Measuring Instrument SN: 1062 26—Sep—12 (in house check Oct—17) Oct—19 Name Function Signature Calibrated by: Jeton Kastrati Laboratory Technician } s Approved by: Katja Pokovic Technical Manager Issued: January 16, 2018 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: AM1DV3—3060_Jan18 Page 1 of 3

[References [1] ANSI—C63.19—2007 American National Standard for Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids. [2] ANSI—C63.19—2011 American National Standard, Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids. [(3] DASY5 manual, Chapter: Hearing Aid Compatibility (HAC) T—Coil Extension Description of the AM1D probe The AM1D Audio Magnetic Field Probe is a fully shielded magnetic field probe for the frequency range from 100 Hz to 20 kHz. The pickup coil is compliant with the dimensional requirements of [1+2]. The probe includes a symmetric low noise amplifier for the signal available at the shielded 3 pin connector at the side. Power is supplied via the same connector (phantom power supply) and monitored via the LED near the connector. The 7 pin connector at the end of the probe does not carry any signals, but determines the angle of the sensor when mounted on the DAE. The probe supports mechanical detection of the surface. The single sensor in the probe is arranged in a tilt angle allowing measurement of 3 orthogonal field components when rotating the probe by 120° around its axis. It is aligned with the perpendicular component of the field, if the probe axis is tilted nominally 35.3° above the measurement plane, using the connector rotation and sensor angle stated below. The probe is fully RF shielded when operated with the matching signal cable (shielded) and allows measurement of audio magnetic fields in the close vicinity of RF emitting wireless devices according to [1+2] without additional shielding. Handling of the item The probe is manufactured from stainless steel. In order to maintain the performance and calibration of the probe, it must not be opened. The probe is designed for operation in air and shall not be exposed to humidity or liquids. For proper operation of the surface detection and emergency stop functions in a DASY system, the probe must be operated with the special probe cup provided (larger diameter). Methods Applied and Interpretation of Parameters Coordinate System: The AM1D probe is mounted in the DASY system for operation with a HAC Test Arch phantom with AMCC Helmholtz calibration coil according to [3], with the tip pointing to "southwest" orientation. Functional Test: The functional test preceding calibration includes test of Noise level RF immunity (1kHz AM modulated signal). The shield of the probe cable must be well connected. Frequency response verification from 100 Hz to 10 kHz. Connector Rotation: The connector at the end of the probe does not carry any signals and is used for fixation to the DAE only. The probe is operated in the center of the AMCC Helmholtz coil using a 1 kHz magnetic field signal. Its angle is determined from the two minima at nominally +120° and — 120° rotation, so the sensor in the tip of the probe is aligned to the vertical plane in z—direction, corresponding to the field maximum in the AMCC Helmholtz calibration coil. Sensor Angle: The sensor tilting in the vertical plane from the ideal vertical direction is determined from the two minima at nominally +120° and —120°. DASY system uses this angle to align the sensor for radial measurements to the x and y axis in the horizontal plane. Sensitivity;: With the probe sensor aligned to the z—field in the AMCC, the output of the probe is compared to the magnetic field in the AMCC at 1 kHz. The field in the AMCC Helmholtz coil is given by the geometry and the current through the coil, which is monitored on the precision shunt resistor of the coil. Certificate No: AM1DV3—3060_Jan18 Page 2 of 3

AM1D probe identification and configuration data Item AM1DV3 Audio Magnetic 1D Field Probe Type No SP AM1 001 BA Serial No 3060 Overall length 296 mm Tip diameter 6.0 mm (at the tip) Sensor offset 3.0 mm (centre of sensor from tip) Internal Amplifier 20 dB Manufacturer / Origin Schmid & Partner Engineering AG, Zurich, Switzerland Manufacturing date October 30, 2008 Last calibration date January 23, 2017 Calibration data Connector rotation angle {in DASY system) 50.4° +/— 3.6 ° (k=2) Sensor angle (in DASY system) 0.45 ° +/— 0.5 ° (k=2) Sensitivity at 1 kHz (in DASY system) 0.00732 V / (A/m) +/— 2.2 % (Kk=2) The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: AM1DV3—3060_Jan18 Page 3 of 3


Document Created: 2019-01-16 17:29:13
Document Modified: 2019-01-16 17:29:13
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC