SAR plots - device

FCC ID: A4R-X1

RF Exposure Info

Download: PDF
FCCID_1910692

Test Laboratory: UL CCS SAR Lab F Date: 2/26/2013 WiFi 2.4 Frequency: 2462 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 2462 MHz; σ = 1.866 S/m; εr = 37.635; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1352; Calibrated: 10/8/2012 - Probe: EX3DV4 - SN3885; ConvF(6.97, 6.97, 6.97); Calibrated: 10/9/2012; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1185 Ear/802.11b_ch 11/Area Scan (10x8x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.73 W/kg Ear/802.11b_ch 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 32.363 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 3.65 W/kg SAR(1 g) = 1.11 W/kg; SAR(10 g) = 0.376 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.97 W/kg 0 dB = 1.97 W/kg = 2.94 dBW/kg Plot No. 1


Document Created: 2013-02-26 23:19:31
Document Modified: 2013-02-26 23:19:31
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC