NII Declaration letter

FCC ID: A4R-GG2

Cover Letter(s)

Download: PDF
FCCID_4067685

Company: Google LLC
Date: October 2, 2018
                              DTS-UNII Device Declaration Letter
To whom it may concern:
We have declared below featured for FCC equipment authorization,
Device FCC ID: A4R-GG2
(1)       DFS Device --      Master,    Client with Radar detection capability,      Client without radar detection
capability,     N/A
(2)       Active / Passive Scanning
              Frequency Band         Active Scanning          passive scanning
                                                                                        Ad Hoc Mode or
                    (MHz)             (the device can       (where the device is                                  Access point
                                                                                          WIFI Direct
                                     transmit a probe        can listen only with                                  capability
                                                                                           capability
                                         (beacon))               no probes)
              2412 - 2462MHz              Yes,     No              Yes,     No              Yes ,    No               Yes ,   No
              5150 - 5250MHz              Yes,     No              Yes ,    No              Yes ,    No               Yes ,   No
              5250 - 5350MHz              Yes,     No              Yes ,    No              Yes ,    No               Yes ,   No
              5470 - 5725MHz              Yes,     No              Yes ,    No              Yes ,    No               Yes ,   No
              5725 - 5850MHz              Yes,     No              Yes ,    No              Yes ,    No               Yes ,   No

(3)        Country code selection ability -   Yes,     No
If yes, pls explain how it was implemented: (pls also help to provide detail of options for each country selection)
(4)        Meet 15.202 requirement -       Yes ,   No ,
pls check below:
    A master device is defined as a device operating in a mode in which it has the capability to transmit without
receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling
signals to other devices
    A client device is defined as a device operating in a mode in which the transmissions of the device are under
control of the master. A device in client mode is not able to initiate a network…
(5)        For client devices that have software configuration control to operate in different modes (active scanning in
some and passive scanning in others) in different bands (devices with multiple equipment classes or those that
operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the
application must provide software and operations description on how the software and / or hardware is implemented
to ensure that proper operations modes can not be modified by end user or an installer.
    Apply , “Yes , please see SW security Description”.      No Apply , (If apply , pls help to provide explanation on it
was implement , and how software was controlled)



Name: Warwick Wong, P.E.
Title: Manager, EMC Engineering
Signature:




Address: 1600 Amphitheatre Parkway Mountain View, California 94043



Document Created: 2018-10-15 04:23:56
Document Modified: 2018-10-15 04:23:56

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC