EMI Test Report

FCC ID: A3LSMJ610G

Test Report

Download: PDF
FCCID_4001074

EMC TEST REPORT Project No. LBE20181762 Issue No. _ 0 Name of organization Samsung Electronics Co., Ltd. (Maetan—dong) 129, Samsung—ro, Yeongtong—gu, § Applicant Addre ss Suwon—si, Gyeonggi—do, 16677, Republic of Korea Date of application August 21, 2018 [ Class B personal computers and peripherals Type of device yP [] All other devices athhuoilPirzr;iir:n [] Declaration of Conformity [X Certification [] Verification FCC ID A3LSMI610G Kind of product Mobile Phone EUT Model No. SM—J610G/DS Variant Model No. Refer to clause 4.6 Samsung India Electronics PVT. Ltd. Manufacturer f NOIDA uttar Pradeshe, India 201—305 Applied Standards 47 CFR Part 15, Subpart B, Class B / ANSI C63.4—2014 Test Period August 24, 2018 ~ August 28, 2018 Issue date August 31, 2018 Test result : Complied The equipment under test has found to be compliant with the applied standards. (Refer to the attached test result for more detail.) Tested by : Sung—Wook Choi _ Reviewed by : Young—Hun Kim C e 1J A_/ . ZLfe L. 6 m , y 4. khs The test results in this report only apply to the tested sample. This report must not be reproduced, except in full, without written permission from Global CS Center. Global CS Center of Samsung Electronics Co., Ltd. (Maetan—dong) 129, Samsung—ro, Yeongtong—gu, Suwon:—si, Gyeonggi—do, 16677, Republic of Korea ‘

Project No. : LBE20181762 Mobile Phone : SM-J610G/DS Table of contents 1. Report Information 1.1 Revision history ------------------------------------------------------------------------------------------------------------------ 3 2. Summary of test results 2.1 Emission ------------------------------------------------------------------------------------------------------------------------------- 3 3. General Information 3.1 Test facility ---------------------------------------------------------------------------------------------------------------------------- 3 4. Test Configuration 4.1 Test Peripherals ----------------------------------------------------------------------------------------------------------------- 4 4.2 EUT operating mode -------------------------------------------------------------------------------------------------------- 5 4.3 Details of Sampling ----------------------------------------------------------------------------------------------------------- 5 4.4 Used cable description ---------------------------------------------------------------------------------------------------- 5 4.5 Test arrangement -------------------------------------------------------------------------------------------------------------- 6 4.6 EUT Description ----------------------------------------------------------------------------------------------------------------- 6 4.7 EUT Frequencies ------------------------------------------------------------------------------------------------------------ 6 4.8 Test configuration and condition ---------------------------------------------------------------------------------- 7 4.9 Measurement uncertainty ---------------------------------------------------------------------------------------------- 7 5. Result of individual tests 5.1 Conducted disturbance --------------------------------------------------------------------------------------------------- 8 5.2 Radiated disturbance ------------------------------------------------------------------------------------------------------- 10 -2/13- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/6

Project No. : LBE20181762 Mobile Phone : SM-J610G/DS 1. Report Information 1.1 Revision history No. Revised detailed information Issue 0 There are no revisions and this version is basic test report. 2. Summary of test results 1.1 Emission The EUT has been tested according to the following specifications: Applied Test type Applied standard Result Conducted Disturbance Complied (Mains port) 47 CFR Part 15 Subpart B / ANSI C63.4-2014 (Class B) Radiated Disturbance Complied 3. General Information 3.1 Test facility The Global CS Center is located on Samsung Electronics Co., Ltd. at (Maetan-dong) 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Republic of Korea. All testing are performed in Semi-anechoic chambers conforming to the site attenuation characteristics defined by ANSI C63.4, CISPR 32, CISPR 16-1-4 and Shielded rooms. And all antennas are properly calibrated using ANSI C63.5:2006. The Global CS Center is operated as testing laboratory in accordance with the requirements of ISO/IEC 17025:2005. -3/13- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/6

Project No. : LBE20181762 Mobile Phone : SM-J610G/DS 4. Test Setup configuration 4.1 Test Peripherals The cables used for these peripherals are either permanently attached by the peripheral manufacturer or coupled with an assigned cable as defined below. The following is a listing of the EUT and peripherals utilized during the performance of EMC test: Manufacturer FCC ID Mark Description Model No. Serial No. / Trademark / DoC A Mobile Phone SM-J610G/DS - SAMSUNG A3LSMJ610G B Battery EB-BG610ABE - SAMSUNG - C Headset EHS61ASFWE - SAMSUNG - D Data Cable ECB-DU68WE - SAMSUNG - E Micro SD Card 64GB - SAMSUNG - Desk-Top DM-C410 HFGD97AB700278X SAMSUNG DoC F Computer DM300S A20100622 SAMSUNG DoC PE22BS N849HVMP702249R SAMSUNG DoC G LCD TV Monitor EM23TS NC26H1KSB01550B SAMSUNG DoC TAKD125024 V SAMSUNG DoC H Mouse SML-210PB TAKD124911 M SAMSUNG DoC 8M001183 SAMSUNG DoC I Keyboard SDM8500P 8M001033 SAMSUNG DoC CN33FQ703Q HP DoC J Gigabit Switch 8 J9794A CN33FQ71XK HP DoC DIKD1245096741 Delta DoC K Power Supply EADP-15DC A DIKD1245096576 Delta DoC -4/13- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/6

Project No. : LBE20181762 Mobile Phone : SM-J610G/DS 4.2 EUT operating mode To achieve compliance applied standard specification, the following mode(s) were made during compliance testing: Operating Mode 1 USB Mode (Data Communication) 4.3 Details of Sampling Customer selected, single unit. 4.4 Used cable description The EUT is configured, installed, arranged and operated in a manner consistent with typical applications. Interface cables/loads/devices are connected to at least one of each type of interface port of the EUT, and where practical, each cable shall be terminated in a device typical of actual usage. The type(s) of interconnecting cables to be used and the interface port (of the EUT) to which these were connected: Length Shielded No. Connected cable Note [m] [Y/N] 1 Data Cable 0.8 Yes From EUT to Desk-Top Computer 2 Headset 1.6 No For EUT 3 Power 1.8 No For Desk-Top Computer 4 Power 1.8 No For LCD TV Monitor 5 Power 1.8 No From Gigabit Switch 8 to Power Supply 6 Power 1.8 No For Power Supply 7 LAN 1.5 No From Desk-Top Computer to Gigabit Switch 8 8 LAN 1.5 No From Gigabit Switch 8 to Local Area Network 9 RGB 1.8 Yes From Desk-Top Computer to LCD TV Monitor 10 PS/2 1.5 Yes From Desk-Top Computer to Mouse 11 PS/2 1.5 Yes From Desk-Top Computer to Keyboard -5/13- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/6

Project No. : LBE20181762 Mobile Phone : SM-J610G/DS 4.5 Test arrangement 4.6 EUT Description The EUT is a bar type Mobile Phone which can operate on GSM 850/900/1800/1900, WCDMA FDD1/2/4/5/8, LTE FDD1/2/3/4/5/7/8/12/13/17/20/28/66, LTE TDD38/40/41 and incorporate Bluetooth, ANT+, GNSS, FM Radio, Wi-Fi, Camera, MP3 and MP4 player. 4.6.1 The variant models - SM-J610G, SM-J415G, SM-J415G/DS 4.7 EUT Frequencies The highest frequencies Frequency [ MHz ] (Generated and used) Bluetooth 2 480 -6/13- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/6

Project No. : LBE20181762 Mobile Phone : SM-J610G/DS 4.8 Test configuration and condition The EUT exercise program which is the samsung standardized emission test program for Windows was used during all EMC measurements were tested. This program was contained on the PC hard disk drive. Once loaded, the program sequentially exercises each system component in turn. The EUT was exercised during the testing by data read and write cycles repeated with internal/ external storage devices. At the end of the test, the copied back data was compared with origin The EUT was connected to the PC by using USB data cable to charge. The system was configured for testing in a typical fashion that a customer would normally use, and was tested while in an automated non-attendant mode. The EUT was exercised with S-Pen wireless charging during the testing. Power source for the EUT operating was supplied by CVCF made by the Pacific Power Source Corp. - Test Voltage : AC 120 V, 60 Hz 4.9 Measurement uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the apparatus: (According to CISPR 16-4-2 and UKAS M3003) 4.9.1 Emission Measurement uncertainty Test type (C.L. 95 %, k = 2) Conducted disturbance AC Mains 3.52 dB Radiated Disturbance Horizontal 4.99 dB (30 MHz ~ 1 GHz) Vertical 4.90 dB Radiated Disturbance Horizontal 5.06 dB (1 GHz ~ 6 GHz) Vertical 5.06 dB Radiated Disturbance Horizontal 5.33 dB (6 GHz ~ 18 GHz) Vertical 5.32 dB -7/13- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/6

Project No. : LBE20181762 Mobile Phone : SM-J610G/DS 5. Results of individual test 5.1 Conducted disturbance The EUT was connected to the Desk-Top Computer which was powered from one LISN for the measurements. The support equipment power cables were connected to a second LISN. Both conducted lines are measured in Quasi-Peak and CISPR-Average mode, including the worst-case data points for each tested configuration. The EUT measured in accordance with the methods described in standards. Limits for conducted disturbance at the mains ports of Class B ITE Frequency range Limits Resolution Bandwidth Limits [ dB(μV) ] [ MHz ] [ kHz ] Quasi-peak Average 0,15 to 0,50 9 66 to 56 56 to 46 0,50 to 5 9 56 46 5 to 30 9 60 50 NOTE 1 The lower limit shall apply at the transition frequency. NOTE 2 The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz. 5.1.1 Test instrumentation Calibration EMC No. Test Instrument Model name Manufacturer Serial No. Interval Date (Month) E5I-010 LISN ESH3-Z5 R&S 100263 2017-11-09 12 E5I-017 EMI Test Receiver ESU8 R&S 100483 2018-01-12 12 E5I-127 LISN ENV216 R&S 102061 2018-07-23 12 - Test software EMC32 R&S Ver 9.26.01 - - 5.1.2 Temperature and humidity condition Test date 2018-08-28 Test engineer Sung-Wook Choi Ambient temperature (21.3 ~ 21.6) ℃ Limit (15.0 to 35.0) ℃ Climate condition Relative humidity (51.4 ~ 52.6) % R.H. Limit (25.0 to 75.0) % R.H. Atmospheric pressure (100.5 ~ 100.7) kPa Limit (86.0 to 106.0) kPa Test place Shield Room (SR8) -8/13- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/6

Project No. : LBE20181762 Mobile Phone : SM-J610G/DS 5.1.3 Test results □ Operating Mode 1: AC Mains 70 65 EN55032_ClassB_Voltage on Mains QP 60 55 EN55032_ClassB_Voltage on Mains AV 50 45 40 Level in dBμ 35 30 25 20 15 10 5 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Note 1) Two graphs measured for both Live(L1) and Neutral(N) of the LISN are combined into one graph. QP / CAV final measurement results table: Frequency QP CAV Limit Margin Corr. Line (MHz) (dBμV) (dBμV) (dBμV) (dB) (dB) 0.164 46.6 --- 65.3 18.7 L1 9.8 0.173 --- 35.0 54.8 19.8 L1 9.9 0.210 --- 41.1 53.2 12.1 L1 9.9 0.237 39.3 --- 62.2 22.9 L1 9.7 1.040 --- 23.8 46.0 22.2 L1 9.8 1.385 --- 23.3 46.0 22.7 N 9.7 4.092 --- 25.9 46.0 20.1 N 9.7 4.161 30.2 --- 56.0 25.8 N 9.7 17.137 25.8 --- 60.0 34.2 N 9.9 17.637 22.0 --- 60.0 38.0 L1 9.9 18.304 23.7 --- 60.0 36.3 N 9.9 18.520 --- 29.1 50.0 20.9 N 9.9 Note 2) Level (QP and/or CAV) = Meter Reading (QP and/or CAV) + Corr. (LISN Insertion Loss + Cable Loss) Margin (QP and/or CAV) = Limit – Level (QP and/or CAV) QP = Quasi-Peak, CAV = CISPR-Average, Corr. = Correction Factor -9/13- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/6

Project No. : LBE20181762 Mobile Phone : SM-J610G/DS 5.2 Radiated disturbance The following data lists the significant emission frequencies, measured levels, correction factors (for antenna and cables), orientation of table, polarization and height of antenna, the corrected reading, the limit, and the amount of margin. Peak measurements were made over the changeable frequency range 30 MHz to 1 GHz at a measurement distance of 10 m for the following antenna and turntable arrangements: Resolution Video Antenna Height Turntable position Antenna Polarisation Bandwidth Bandwidth [ cm ] [ degrees ] [ kHz ] [ kHz ] 100 ~ 400 Horizontal, Vertical 120 300 Continuous Measurements within 6 dB of the limit were then maximized by adjusting turntable position. Final measurements were made using quasi-peak detector. Peak/CISPR-Average measurements were made over the changeable frequency range 1 GHz to 40 GHz or 5th harmonics of the highest frequency generated or used in the device or on which the device operate or tunes at a measurement distance of 3 m for the following antenna and turntable arrangements. The measurements above 1 GHz were performed with the bore-sighting antenna aimed at the EUT. Resolution Video Antenna Height Antenna Polarisation Bandwidth Bandwidth Turntable position [ cm ] [ MHz ] [ MHz ] 100 ~ 400 Horizontal, Vertical 1 3 Continuous Measurements within 6 dB of the limit were then maximized by adjusting turntable position. Final measurements were made using peak and CISPR-average detectors. Limits for radiated disturbance of Class B ITE at a measuring distance of 3 m and 10 m Frequency range Limits Field Strength [ MHz ] 3 m [ μV/m ] 3 m [ dB(μV/m) ] 10 m [ dB(μV/m) ] 30 to 88 100 40.0 29.5 88 to 216 150 43.5 33.0 216 to 960 200 46.0 35.5 Above 960 500 54.0 43.5 Results checked manually; and points close to the limit line were re-measured. -10/13- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/6

Project No. : LBE20181762 Mobile Phone : SM-J610G/DS 5.2.1 Test instrumentation Calibration EMC No. Test Instrument Model name Manufacturer Serial No. Interval Date (Month) E5I-016 EMI Test Receiver ESU8 R&S 100482 2018-06-08 12 E5I-021 EMI Test Receiver ESU40 R&S 100376 2018-01-31 12 E5I-149 Horn Antenna HF907 R&S 102525 2018-06-15 24 Signal E5I-039 SCU-18 R&S 10211 2018-01-22 12 Conditioning Unit E5I-120 BiLog Antenna CBL6112D TESEQ 36997 2018-04-23 24 E5I-072 BiLog Antenna CBL6112D TESEQ 36009 2018-04-23 24 E5I-073 Preamplifier 310N SONOMA 332016 2018-05-09 12 E5I-074 Preamplifier 310N SONOMA 332017 2018-05-09 12 - Test software EP7RE TOYO Ver 5.8.2 - - - Test software EMC32 R&S Ver 9.25.00 - - 5.2.2 Temperature and humidity condition Test date 2018-08-24 Test engineer Sung-Wook Choi Ambient temperature (21.7 ~ 21.9) ℃ Limit (15.0 to 35.0) ℃ Climate condition Relative humidity (50.7 ~ 51.8) % R.H. Limit (25.0 to 75.0) % R.H. Atmospheric pressure (99.7~ 99.9) kPa Limit (86.0 to 106.0) kPa Test place Semi-Anechoic Chamber (SAC4) -11/13- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/6

Project No. : LBE20181762 Mobile Phone : SM-J610G/DS 5.2.3 Test results □ Operating Mode 1 - Frequencies below 1 GHz <<>> Model : SM-J610FN/DS Limit : Serial Number : Remark1 : USB Operator : SW Choi Remark2 : Read AC Power : Remark3 : Temp, Humid : Remark4 : [dB(uV/m)] 60 <FCC B 30-1000 MHz 10m> QP <USB_R> Range(H,PK) 50 Range(V,PK) Final Item(H,QP) Final Item(V,QP) 40 Level 30 20 10 0 30.000 50.000 100.000 500.000 1000.000 Frequency [MHz] Final Result No. Frequency (P) Reading c.f Result Limit Margin Height Angle System QP QP QP QP [MHz] [dB(uV)] [dB(1/m)] [dB(uV/m)] [dB(uV/m)] [dB] [cm] [deg] 1 30.849 H 23.2 -7.7 15.5 29.5 14.0 400 355 1 2 39.094 V 32.9 -10.6 22.3 29.5 7.2 100 322 2 3 58.130 V 35.1 -18.7 16.4 29.5 13.1 300 281 2 4 118.755 V 34.0 -11.9 22.1 33.0 10.9 100 78 2 5 479.959 H 36.0 -6.1 29.9 35.5 5.6 241 30 1 6 607.756 H 24.1 -4.1 20.0 35.5 15.5 180 146 1 7 621.943 H 25.0 -3.7 21.3 35.5 14.2 103 128 1 8 710.213 H 25.5 -3.0 22.5 35.5 13.0 115 312 1 9 711.183 V 26.1 -2.9 23.2 35.5 12.3 300 319 2 10 858.016 V 30.9 -0.7 30.2 35.5 5.3 300 162 2 11 995.392 H 22.9 1.4 24.3 43.5 19.2 300 303 1 Note1) Receiving antenna polarization : Horizontal, Vertical Test Distance : 10 m, Antenna Height : 1 to 4 meters Result (QP) = Reading (QP) + c.f (Antenna Factor + Cable Loss - Amp. Gain) Margin (QP) = Limit – Level (QP) QP = Quasi-Peak, c.f = Correction Factor Note 2) Three orientations have been investigated and the worst case orientation is reported. -12/13- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/6

Project No. : LBE20181762 Mobile Phone : SM-J610G/DS - Frequencies above 1 GHz 80 FCC CLASS B PK 70 60 FCC CLASS B AV 50 Level in dBμV/ 40 30 20 10 0 1G 2G 3G 4G 5G 6 8 10G 18G Frequency in Hz Frequency PK CAV Limit Margin Height Azimuth Corr. Pol (MHz) (dBμV/m) (dBμV/m) (dBμV/m) (dB) (cm) (deg) (dB) 1 065.200 45.5 --- 74.0 28.5 100.0 H 274.0 6.5 1 065.200 --- 33.9 54.0 20.1 100.0 H 274.0 6.5 1 110.000 50.5 --- 74.0 23.5 100.0 H 203.0 6.5 1 110.400 --- 39.8 54.0 14.2 100.0 H 274.0 6.5 1 140.800 44.9 --- 74.0 29.1 100.0 H 270.0 6.4 1 141.200 --- 34.1 54.0 19.9 100.0 H 274.0 6.4 1 272.400 48.7 --- 74.0 25.3 100.0 V 154.0 7.4 1 833.600 --- 31.9 54.0 22.1 100.0 H 274.0 11.4 2 132.000 49.2 --- 74.0 24.8 100.0 H 206.0 12.9 2 132.000 --- 35.1 54.0 18.9 100.0 H 274.0 12.9 3 187.500 --- 31.6 54.0 22.4 100.0 H 274.0 0.9 3 188.000 47.5 --- 74.0 26.5 100.0 H 222.0 0.9 Note 1) Receiving antenna polarization : Horizontal, Vertical Test Distance : 3 m, Antenna Height : 1 to 4 meters Level (PK and/or CAV) = Reading (PK and/or CAV) + Corr. (Antenna Factor + Cable Loss - Amp. Gain) Margin (PK and/or CAV) = Limit – Level (PK and/or CAV) PK = Peak, CAV = CISPR-Average, Corr. = Correction Factor Note 2) Three orientations have been investigated and the worst case orientation is reported. -13/13- This report must not be reproduced, except in full, without written permission from Global CS Center. Form No.: SRA-TRF-46/6


Document Created: 2018-08-31 10:13:56
Document Modified: 2018-08-31 10:13:56
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC