15_HS-M300 UserMan-US

FCC ID: 2AUTE-HS-M300

Users Manual

Download: PDF
FCCID_4499416

Pair with mobile Buzzer Support with APP Support with APP Scanning se�ng Scanning se�ng 1. Long press the bu�on in the scanner to make the LED Status Beeping �mes 1. Sound Se�ng: set the sound ON and OFF with the APP. 6. Working Mode Se�ng: with this se�ng, the working mode Note: The following scan se�ngs are required when Bluetooth 2）HID MODE (Green indicator will light) light up, then you can hear Long beep: 1 �me+ Vibra�on Long press to turn on the scanner of the scanner can be set to HID or GATT. A�er se�ng, the is not connected. It can be set successfully a�er the scanner 2. LED Se�ng: set the lights on, flash and lights off for Blue- Bluetooth Scanner “beep” with vibra�on. Short beep: 1 �me Connect to Bluetooth scanner will automa�cally shut down. When reconnec�ng, open the se�ng mode firstly. Otherwise, the se�ng mode is Short beep: 2 �mes Disconnect Bluetooth and scan tooth indicator by the light bu�on. you need to delete the device of Bluetooth to reconnect. off by default and cannot be scanned. barcode without Bluetooth 2. Turn on the Bluetooth of mobile and the APP respec�vely. Short beep: 1 �me+Vibra�on Scan barcode with Bluetooth 3. CRLF Se�ng: this se�ng can be used to add a carriage 7. Restore Factory Se�ngs: A�er the restore factory be set, 1.Mode ON/OFF Se�ng (Default OFF) Device Name: HPRT SCANNER return line feed or cancel carriage return line feed at the the working mode will be automa�cally set to HID mode. 1）ON HS-M300 Click the device name to make a paired connec�on. A�er connected successfully, the scanner will make a LED Indicator end of the scan data. This se�ng supports power-off save. (If the original is GATT mode, the scanner will be shut do- 3.End Enter 1）OFF “beep” and LED light up (Blue indicator), then it will Color Descrip�on wn. When reconnec�ng, you need to delete the device of 4. Caps Lock Se�ng: with this se�ng, the English alphabet enter into the se�ng interface. Red light During Charge Bluetooth to reconnect). It will set the characters remain can be set to remain as it is or converted to caps lock. This Green light Full charge, power on as it is and the sound is set to ON automa�cally. se�ng supports power-off save. 2）OFF Blue light Connect to Bluetooth 3. It means the scanner has been connected successfully 8. Switch Working Mode: when the scanner is not connect to by comple�ng the above the steps. 5. Con�nous Scanning Mode: with this se�ng, the scanner 2）ON Test if the scanner can be used: enter the se�ng inter- Power ON / OFF can be set to ON and OFF by con�nous scanning mode. Bluetooth, scan the corresponding barcode can be switched to the corresponding working mode. But you need to delete face of the APP, then scan the barcode with the scanner Power on: In the power off status, long press the bu�on for 2 seconds, When the con�nous mode is turned on, press the bu�on ▲ the device name in system Bluetooth to reconnect the to check the receiving func�on. If it can receive data it will make a long beep and vibra�on that means the scanner is power to scan code. A�er the scan is successful, the scanning light scanner. 2.Bluetooth Mode Conversion that means the pair is successfully; if not, re-pair accor- on. will be turned on automa�cally and con�nue to scan the 1）GATT MODE Power off: In the power on status, long press the bu�on for 2 seconds, ▲ ding to steps 1 and 2. next barcode. You don’t need to manually press the bu�on, Instruc�on Manual it will make a long beep and vibra�on that means the scanner is power off. unless it is automa�cally turned off without scanning the Wireless transmission at a visible distance of 10 meters outdoors Note: the scanner will be shut down automa�cally if it is not used for code for more than 10 seconds, then press the bu�on again ▲ ▲ Support Win 8.1 or above, Win 10, Android device and iOS device. more than 10 minutes. to start scanning.

Scanning se�ng Scanning se�ng Scanning se�ng Scanning se�ng Problems State FCC Warning 4.Con�nuous automa�c scanning 8.Temporary switch The Bluetooth scanner can not be connected to Andriod device? Our company does not assume any responsibility for losses This device complies with part 15 of the FCC Rules. ▲ 1）ON 2) ON, automa�c conversion to Capital le�er 2) OFF 1) ON Please make sure that the Android system support for BT, and its caused by natural disasters (such as earthquakes, floods, etc.) Opera�on is subject to the following two condi�ons: that exceed our scope of responsibility. (1) This device may not cause harmful interference, and recommended to use 5.0 or above. (2) this device must accept any interference received, including int- After being paired, the barcode can not be upload to device? In any case, our company does not assume any responsibility ▲ erference that may cause undesired opera�on. Please confirm the working mode of the scanner. If it is in GATT for losses caused by using this product, such as loss of profits, NOTE: mode, it needs to receive data in APP. If it is in HID mode, barcode loss of reputa�on, business interrup�on, loss or change of This equipment has been tested and found to comply with the limits for 2) OFF stored data, and any special, unexpected, associated or inter- data can be output as long as the input method can be input. a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 2）OFF 3) ON, automa�c conversion to Small le�er mi�ent losses caused by the above. designed to provide reasonable protec�on against harmful interference in The device can not search the scanner? ▲ 7.Motor 1. Make sure is power on. Our company does not assume the responsibility for the losses a residen�al installa�on. 1）ON caused by due to improper use of hardware or so�ware not This equipment generates, uses and can radiate radio frequency energy 2. Make sure the mobile version meets the requirement. specified by the our company . and, if not installed and used in accordance with the instruc�ons, may 3. Confirm if the Bluetooth of the scanner is connected (the blue cause harmful interference to radio communica�ons. 9.Restore factory se�ngs light is on), if connected, you need to disconnect the Bluetooth Our company does not provide any form of warranty or technical support for the informa�on, data, files, other products, services However, there is no guarantee that interference will not occur in a par�cular Execute restore factory se�ngs connec�on from the connected device and rescan. installa�on. If this equipment does cause harmful interference to radio or obtained though the use of this product, and does not assume 5.Automatic conversion of Capital/Small letter 6.Buzzer se�ng How to connect to the mobile again if the Bluetooth scanner has television recep�on, which can be determined by turning the equipment any responsibility for the use of above descrip�on by users. ▲ 1）Original 1）ON off and on, the user is encouraged to try to correct the interference by one been connected to mobile? 2) OFF Our company are not take any form of guarantee for third-party or more of the following measures: Open the Bluetooth searching interface of the APP to connect so�ware used by this product. - Reorient or relocate the receiving antenna. to the corresponding Bluetooth device. - Increase the separa�on between the equipment and receiver. Due to the con�nuous improvement of the products, the opera�on - Connect the equipment into an outlet on a circuit different from that If the data received in HID mode is different from the original data? ▲ 10.Power off and common problems of the models described in the manual are to which the receiver is connected. Confirm the current input method is an English keyboard, and turn mainly based on actual machines. And it may be changed without Execute power off - Consult the dealer or an experienced radio/ TV technician for help. off the English word mode, the English associa�on and the ini�al no�ce. Warning: capitaliza�on mode (depending on the different input methods). Changes or modifica�ons to this unit not expressly approved by the part responsible If not, download the Sogou input method and turn off the above for compliance could void the user’s authority to operate the equipment. mode before using the scanner. FCC Radia�on Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condi�on without restric�on.


Document Created: 2019-10-30 09:29:17
Document Modified: 2019-10-30 09:29:17
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC