RF Exposure Info

FCC ID: 2AUORM17

RF Exposure Info

Download: PDF
FCCID_4484525

                                  Shenzhen Huaxia Testing Technology Co., Ltd
                                  1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District,
                                  Shenzhen, China
                                  Telephone:     +86-755-26648640
                                  Fax:           +86-755-26648637                  Report Template Version: V04
                                  Website:       www.cqa-cert.com                  Report Template Revision Date: 2018-07-06



                RF Exposure Evaluation Report
Report No. :                      CQASZ20190900880E-02
Applicant:                        Shenzhen Xiangxing Digital Technology Co., Ltd.
Address of Applicant:             Building 401, Building D, 1067 (formerly No. 148, Xuegang South Road),
                                  Xiangangtang Community, Xiangtian Street, Longgang District, Shenzhen,
                                  China
Equipment Under Test (EUT):
EUT Name:                         Bluetooth earphone
All Model No.:                    M7, M10, M11, M12, M13, M14, M15, M16, M17, M18, M19, M20, F10, F11,
                                  F12, F13, F14, F15, F16, F17, F18, F19, F20, V10, V11, V12, V13, V14, V15,
                                  V16, V17, V18, V19, V20, F7, F8, F9, A10, A11, A12, A13, A14, A15, A16,
                                  A17, A18, A19, A20, Q32, X7, A10, TX-32
Test Model No.:                   M17
Brand Name:

FCC ID:                           2AUORM17
Standards:                        47 CFR Part 1.1307
                                  47 CFR Part 1.1310
                                  KDB447498D01 General RF Exposure Guidance v06
Date of Receipt:                  2019-09-11
Date of Test:                     2019-09-11 to 2019-09-23
Date of Issue:                    2019-09-23
Test Result :                     PASS*
*In the configuration tested, the EUT complied with the standards specified above



Tested By:
                                                (Tom Chen)


Reviewed By:
                                               (Sheek Luo)


Approved By:
                                                 ( Jack Ai)




The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to

the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full.


                                    Shenzhen Huaxia Testing Technology Co., Ltd
                                                     Report No.: CQASZ20190900880E-02


1   Version
                            Revision History Of Report

          Report No.          Version        Description           Issue Date
     CQASZ20190900880E-02      Rev.01        Initial report       2019-09-23




                              Page:2 of 6


                                                                                  Shenzhen Huaxia Testing Technology Co., Ltd
                                                                                                                     Report No.: CQASZ20190900880E-02



2         Contents
                                                                                                                                                                          Page
1       VERSION...................................................................................................................................................................... 2

2       CONTENTS.................................................................................................................................................................. 3

3       GENERAL INFORMATION....................................................................................................................................... 4
    3.1     CLIENT INFORMATION................................................................................................................................................4
    3.2     GENERAL DESCRIPTION OF EUT............................................................................................................................. 4
4       SAR EVALUATION.....................................................................................................................................................5
    4.1 RF EXPOSURE COMPLIANCE REQUIREMENT...........................................................................................................5
       4.1.1 Standard Requirement..................................................................................................................................5
       4.1.2 Limits............................................................................................................................................................... 5
       4.1.3 EUT RF Exposure......................................................................................................................................... 6




                                                                      Page:3 of 6


                                                  Shenzhen Huaxia Testing Technology Co., Ltd
                                                                      Report No.: CQASZ20190900880E-02



3      General Information
3.1 Client Information
      Applicant:                   Shenzhen Xiangxing Digital Technology Co., Ltd.
      Address of Applicant:        Building 401, Building D, 1067 (formerly No. 148, Xuegang South Road),
                                   Xiangangtang Community, Xiangtian Street, Longgang District, Shenzhen,
                                   China
      Manufacturer:                Shenzhen Xiangxing Digital Technology Co., Ltd.
      Address of Manufacturer:     Building 401, Building D, 1067 (formerly No. 148, Xuegang South Road),
                                   Xiangangtang Community, Xiangtian Street, Longgang District, Shenzhen,
                                   China

3.2 General Description of EUT
      Product Name:                Bluetooth earphone
      All Model No.:               M7, M10, M11, M12, M13, M14, M15, M16, M17, M18, M19, M20, F10,
                                   F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, V10, V11, V12, V13,
                                   V14, V15, V16, V17, V18, V19, V20, F7, F8, F9, A10, A11, A12, A13, A14,
                                   A15, A16, A17, A18, A19, A20, Q32, X7, A10, TX-32
      Test Model No.:              M17
      Trade Mark:

     Hardware Version:             V10
     Software Version:             V5
     Operation Frequency:          2402MHz~2480MHz
     Bluetooth Version:            V5.0
     Modulation Technique:         Frequency Hopping Spread Spectrum(FHSS)
     Modulation Type:              GFSK, π/4DQPSK, 8DPSK
     Transfer Rate:                1Mbps/2Mbps/3Mbps
     Number of Channel:            79
     Hopping Channel Type:         Adaptive Frequency Hopping systems
     Product Type:                      Mobile      Portable       Fix Location
     Test Software of EUT:         BT _Tool (manufacturer declare )
      Antenna Type:                PCB antenna
      Antenna Gain:                -0.58dBi
      Power Supply:                lithium battery:DC3.7V, Charge by DC5.0V
Note:
Model No.: M7, M10, M11, M12, M13, M14, M15, M16, M17, M18, M19, M20, F10, F11, F12, F13, F14, F15,
F16, F17, F18, F19, F20, V10, V11, V12, V13, V14, V15, V16, V17, V18, V19, V20, F7, F8, F9, A10, A11, A12,
A13, A14, A15, A16, A17, A18, A19, A20, Q32, X7, A10, TX-32
Only the model M17 was tested, since the electrical circuit design, layout, components used and internal wiring
were identical for the above models, with difference being color of appearance.




                                            Page:4 of 6


                                                Shenzhen Huaxia Testing Technology Co., Ltd
                                                                     Report No.: CQASZ20190900880E-02



4    SAR Evaluation
4.1 RF Exposure Compliance Requirement
4.1.1 Standard Requirement
     According to KDB447498D01 General RF Exposure Guidance v06
     4.3.1. Standalone SAR test exclusion considerations
           Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head
     or body and 10-g extremity SAR evaluation for general population exposure conditions, by
     measurement or numerical simulation, is not required when the corresponding SAR Exclusion
     Threshold condition, listed below, is satisfied.
4.1.2 Limits
     The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances
     ≤ 50 mm are determined by:

     [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·
     [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where

        f(GHz) is the RF channel transmit frequency in GHz
        Power and distance are rounded to the nearest mW and mm before calculation17
        The result is rounded to one decimal place for comparison
     The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and
     for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation
     distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion




                                         Page:5 of 6


                                                 Shenzhen Huaxia Testing Technology Co., Ltd
                                                                       Report No.: CQASZ20190900880E-02




4.1.3 EUT RF Exposure
Measurement Data
                                               GFSK mode
                                                       Tune up tolerance             Maximum tune-up Power
       Test channel              Peak Output Power
                                      (dBm)                      (dBm)                (dBm)        (mW)

    Lowest(2402MHz)                   3.270                       3±1                    4         2.512
     Middle(2441MHz)                  1.610                       2±1                    3         1.995
    Highest(2480MHz)                  0.390                       1±1                    2         1.585
                                             π/4DQPSK mode
                                                       Tune up tolerance             Maximum tune-up Power
       Test channel              Peak Output Power
                                      (dBm)                      (dBm)                (dBm)        (mW)

    Lowest(2402MHz)                   4.080                       4±1                    5         3.162
     Middle(2441MHz)                  2.370                       3±1                    4         2.512
    Highest(2480MHz)                  1.150                       1±1                    2         1.585
                                              8DPSK mode
                                                       Tune up tolerance             Maximum tune-up Power
       Test channel              Peak Output Power
                                      (dBm)                      (dBm)                (dBm)        (mW)

    Lowest(2402MHz)                   4.630                       4±1                    5         3.162
     Middle(2441MHz)                  3.000                       3±1                    4         2.512
    Highest(2480MHz)                  1.800                       1±1                    2         1.585

  Worst case: 8DPSK
                   Maximum Peak                        Maximum tune-
                                        Tune up
                       Conducted                            up Power        Calculated        Exclusion
     Channel                            tolerance
                      Output Power                                            value           threshold
                                         (dBm)         (dBm)     (mW)
                         (dBm)
      Lowest
                         4.630            4±1            5       3.162        0.98
    (2402MHz)
      Middle
                                                                                                 3.0
    (2441MHz)            3.000            3±1            4       2.512        0.78

     Highest
    (2480MHz)            1.800            1±1            2       1.585        0.50

  Conclusion: the calculated value ≤3.0, SAR is exempted.

Remark: The Max Conducted Peak Output Power data refer to report Report No.: CQASZ20190900880E-01




                                         Page:6 of 6



Document Created: 2019-10-14 11:19:31
Document Modified: 2019-10-14 11:19:31

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC