Users Manual Revised

FCC ID: 2AUKSVEROTX2400

Users Manual

Download: PDF
FCCID_4503700

User Manual 100-000A 2.4GHz Vero Transponder August 2019 Description The Vero transponder acts as both the wireless power supply for an array of wireless sensors and the communications interface between the local, low-energy wireless network of receiver and sensor modules (RSM) and the existing, wide-area data network on the installation location. The transponder is able to manage RSM data sampling and transmission strategies, both preset fixed and dynamically varying during operation, in addition to making decisions based upon analysis of the sampled data transmitted back by the RSMs. The transponder provides means of sensing the proximity of any nearby personnel or metallic object for the purpose of decreasing or disabling the RF power output. . COMPLIANCE STATEMENTS This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Note: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. WARNING! FCC and IC Radiation Exposure Statement: This equipment complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled environment under the following conditions: 1. This equipment should be installed and operated such that a minimum separation distance of 25cm is maintained between the radiator (antenna) & user’s/nearby person’s body at all times. 2. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. NIKOLA LABS CONFIDENTIAL | INFO@NIKOLA.TECH // Page 1

ELECTRICAL AND MECHANICAL SPECIFICATIONS TABLE 1. 100-000A ABSOLUTE MAXIMUM RATINGS PARAMATER MINIMUM MAXIMUM UNITS Input Voltage 115 vac RF Output 34 dBm EIRP Operating temperature 0 +65 °C TABLE 2. 100-000A ELECTRICAL SPECIFICATIONS PARAMATER DESCRIPTION Conducted RF output power 22 dBm Center Frequency 2.420 GHz Modulation DSSS-OQPSK Bitrate 250 kbps Beam pattern (vertical polarization) HPBW: 26⁰ elevation, 60⁰ azimuth Communication Protocols 802.11b/g/n, 2.4GHz BLE, Custom DTS protocol TABLE 3. 100-000A MECHANICAL SPECIFICATIONS PARAMETER DESCRIPTION Dimensions 16” x 7” x 3.75” (40.6cm x 17.8cm x 9.5cm) Weight 3.4 lbs. (1.55 kg) Enclosure Ruggedized and corrosion resistant, vibration tested to UN DOT 38.3 INSTALLATION INSTRUCTIONS 1. Mount the 100-000A on or near the equipment being monitored such that the front of the unit is facing the receiver and sensor modules (RSMs). The 100-000A must be mounted in a location that always allows for a clearance of 25cm from the front of the unit to any individual. 2. Plug the DC connector of the power supply into the connector on the 100-000A. Then plug the power supply into a 120V outlet. 3. The LED on the front of the 100-000A will continuously flash red to indicate normal operation. Copyright © 2019 Nikola Labs, Inc. All Rights Reserved. Information in this document is provided in connection with Nikola Labs, Inc. (“Nikola Labs”) products or services. These materials, including the information contained herein, are provided by Nikola Labs as a service to its customers and may be used for informational purposes only by the customer. Nikola Labs assumes no responsibility for errors or omissions in these materials or the information contained herein. Nikola Labs may change its documentation, products, services, specifications or product descriptions at any time, without notice. Nikola Labs makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. PRODUCTS AND PRODUCT INFORMATION ARE SUBJECT TO CHANGE WITHOUT NOTICE Nikola Labs | 60 Collegeview Rd, Westerville, Ohio 43081, United States NIKOLA LABS CONFIDENTIAL | INFO@NIKOLA.TECH // Page 2


Document Created: 2019-10-28 17:36:00
Document Modified: 2019-10-28 17:36:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC